Server of the UCS for retransmission of CUCM/UnityCnx/UCCX cause

Similar Questions

• What is the procedure of upgrading since version 7.1 of CUCM (MCS Server) call manager to version 10.2 of CUCM (on the server of the UCS)

  Hello

  What is the procedure to upgrade the call manager since version 7.1 of CUCM (MCS Server) to version 10.2 of CUCM (on the server of the UCS), please let me know the steps to what would be the backup procedures and upgrades.

  Concerning

  Gerard

  I suggest reading this guide to make sure that you have prepared your environment to support the first 10.x. The link below also contains the path to upgrade to 10.0 (1).

  One of the ways to do this is:

  1 / apply cooling cop upgrade file on all servers in the cluster.

  2 / upgrade the cluster to 8.6 (2). Make a backup of the cluster.

  3 / build a cluster of servers 8.6 (2) on the virtual machines and assign them the same host name and the IP address of the cluster hardware. (You may need to keep these on a separate network until turn off hardware machines)

  4 / restoration of the backup of the pile of material on the VM cluster.

  5 / upgrade cluster VM to 10.0 (1).

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/CUCM/upgrade/10_0_1/C...

• I deleted my account on a site I'm going and it keeps saing that Firefox has detected that the server redirects the request for this address in a way that doesn't

  He repeated to me that Firefox has detected that the server redirects the request for this address in a way that will never end.

   This problem can sometimes be caused by disabling or refusing to accept
     cookies.
  

  Have you tried to clear the cache and cookies?

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  See also:

  • http://KB.mozillazine.org/cookies
  • http://KB.mozillazine.org/The_page_is_not_redirecting_properly

• Firefox has detected that the server redirects the request for this address in a way that will never end. I followed your instructions and nothing works. This just started happening today.

  I was watching www.ustream.tv/decoraheagles for months. I started using Firefox about a month ago. Earlier today, when I tried connecting to the site, I received the message "Firefox has detected that the server redirects the request for this address in a way that will never end."
  I went on your site and follow the instructions. This Web site was not in the blocked sites. He told me how to add it, and I did.
  She still refuses to open this site.
  Internet Explorer WILL open this site.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".
  • http://KB.mozillazine.org/The_page_is_not_redirecting_properly

• message from Firefox: "page isn't redirecting properly" Firefox has detected that the server redirects the request for this address in a way that will never end. * Why this mess

  "The page isn't redirecting properly?

  i receive this warning on a daily basis. it seems to occur whenever i open a message  in gmail or try to send a message. anybody have a clue about this? thanks!
  

  Firefox has detected that the server redirects the request for this address in a way that will never end.

     *   This problem can sometimes be caused by disabling or refusing to accept
           cookies.
  

  See http://kb.mozillazine.org/The_page_is_not_redirecting_properly

• Firefox has detected that the server redirects the request for this address in a way that will never end.

  This week (01/10/12) I registered on youtube and now I can't log back in here or in my gmail account. I tried every fix-it/single remedy offered the FF forum but nothing works.

  Any other work, all the sites that I frequent load fine, is youtube doing something on purpose for FF users? I can get the page youtube videos and see, but I can't log on, every time I click the sign in button, I get:

  "The page is not redirecting properly".

  Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
  

  This problem can sometimes be caused by disabling or refusing to accept cookies. »

  I hate to be a conspiracy theorist, I can connect to youtube without problem on IE, but I hate this browser. I use windows 7 and 15 FF. Can someone find it?

  Looks like it's a firefox issue, because that never happened on IE, Safari or Opera on me.
  You think not that a simple patch can solve this problem. I have to delete individual cookies every day.

• How to change the ucs for esxi 5.1 hba queue depth

  Hello

  How can I change the depth of the queue for a host in 5.1 for ucs b200 esxi?

  In esxi

  I type esxcli system module settings - list m

  It shows

  ~ the list of parameters of module system # esxcli fnic m
  Value of Type name description
  -----------------------  ----  -----  -------------------------------------------------------------------------
  uint fnic_fc_trace_max_pages Total allocated pages of memory for the buffer of trace fc
  uint fnic_max_qdepth depth of queue in the report for each LUN
  uint fnic_trace_max_pages Total allocated pages of memory for the buffer of trace fnic
  initial heap_initial int heap size allocated for the pilot.
  heap_max int maximum size of the available heap for the driver.
  the pool of skb_mpool_initial int size drive minimum private socket buffer memory.
  skb_mpool_max int size maximum achievable private socket buffer memory pool for the driver.
   
  How can I change it and what is the depth of queue recommended?

  Was taken before, see for example

  https://supportforums.Cisco.com/discussion/12215126/queue-depth-executio...

  https://supportforums.Cisco.com/discussion/11744776/UCS-HBA-queue-depth-...

• Question of LinkedIn - Firefox has detected that the server redirects the request for this address in a way that will never end.

  Clear cookies doesn't seem to work. It just started happening about 2-3 days ago. Would it be a plug-in in Adobe or something? I think that he updated a couple of days, but I'm not sure. It seems to be the case when I try to open a page on LinkedIn article links.

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

  Are you talking about the links on a web page or opening a link to bookmark a specific page?

• Configuration of a port as 'server port' in UCS FI 6120

  Hi all

  It is a fundamental question. If any user of UCS can kidly help me by providing a checklist for setting up a server in the UCS port, I will be grateful.

  What I've been running a port as the port of the server using the UCS Manager and nothing more. Then I connected the ANC of 10G from the server to this UCS FI. FCoE login never happened. My setup is slightly different from that of a regular system of UCS as I am trying to connect a stand-alone server to the UCS IF instead of use the chassis. Please visit https://supportforums.cisco.com/thread/2117756?tstart=0 to learn more about this topic.

  Looks like these server ports are the ports of junction and can carry any traffic VLAN? So why not FCoE VLAN? Why no "announcement of the discovery? I hung a finisar and don't see something specific protocol FCoE from port of the server.

  Any help is appreciated.

  Thank you

  Niranjan,

  It might help to take the steps that need to occur when you connect a 10G ANC to Nexus one N5K.

  In order to get a CF on a N5K virtual connection, the following steps of the manuals must be made:

  (1) create a vfc and bind it to the physical interface where the ANC is attached

  (2) create a vlan and vsan and associate the vlan for the vsan fcoe

  (3) place the vfc in the vsan created in step 2 above

  Once these steps are completed, and a couple of closing/No.-stops, you will get a vfc on the N5K flogi.

  When you create a Service in UCSM profile and associate with a blade with an ANC, UCSM performs all these tasks for you. If you dig into the system, you will see the vfc and veth that were created for your SPs.

  Without a SP and UCSM to manage the port of the server, any of these steps occur, and you will not get a flogi. There is no method to manipulate UCSM to perform what you're trying to do. It is not in the current design of the product.

  The only supported method to attach a rack CSeries server to a cluster UCSM is using the integration of the C-series features and the necessary equipment (FEX)

  I hope this helps.

• Firefox has detectedthe server redirects the request to an address in a way that will never end

  Firefox has detected that the server redirects the request for this address in a way that will never end it is verbatim it's never happened before

  We have the same problem. Ours is a little out of the ordinary that we have a web application that displays pages based on a configuration of a database for the "namesake" page is created over and over again that our users make their way through our investigations.

  Is there a method on the side Server things, what can be done to stop this error from appearing? We tried some experiments as alternating in the title of the page, redirect between two different pages but FF still think it is to see the same page over and over again.

  We would love to be able to support FF for our clients and their customers (those who take our surveys) and it is a crucial issue at the moment for some of our customers worldwide.

  Any help would be greatly appreciated.

  Thank you
  ~ Dave Carr
  800, Inc. service.
  [email protected]

• How can I retrieve the name of the server and the database to a system dsn

  Hello

  I am trying to create a database that will be used by many stores. Each store has its own server and the database and the access runtime version. I want to create a system dsn name, but allowing the administrator to modify the server and the database for that dsn and then, when you connect to the database, the database must be able to find this DSN and the 'new' name of the server and name of 'new' database and connect to point to this server and the database tables. I don't have a login form and I can get the name of the dsn, but I can't find a way to get the server name and database name for that dsn. Does anyone know a way to retrieve this from the registry. I can see it using regedit but have no idea on how to get this in vba access.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Server of the OSB

  Hello

  is there a way that I can have more control on the server of the OSB. for example; can I use the same server admin, rather than create another one (osb_server1).

  Thank you

  When creating domain, check required for example models OSB, and we you reach the settings of managed servers remove the managed server OSB. Then you have everything on the administration server only.

• How to deploy the agent for solaris

  I have download for Windows Server and the Agent for Solaris.
  The server for windows successfully installed, but how to install the agent for solaris?
  
  The downloaded file is hyperic-hq-agent-3.1.4-EE-504-sparc-solaris.gz
  and when I unzip, it's just hyperic-hq-agent-3.1.4-EE-504-sparc-solaris.
  
  Any help is greatly appreciated.

  Hi Nemesis

  The file extension must be tgz, gz not, maybe your browser has changed.
  You can use this command:

  tar - zxvf hyperic-hq-agent-3.1.4-504-sparc-solaris.tgz

  Then use «./hq-agent.sh setup' to start and configure the agent.

• HTTPS connection to the server with the host name which has its IP address

  Hi all
  
  I work in a development of the solution where a server application is running in a machine and hosts of Application Service SOAP over HTTPS. The server has the certificates for its IP address. My client application tries to use the SOAP Service; but when I connect to the Application Server using the HOST name in the URL, I get the SSLException indicating that the HOST name does not match name the object.
  
  If I use the IP address in the URL, it works well - but I do not like the server application can move to different IP dynamiccaly - if you are using DNS is our solution to hide this complexcity from client applications.
  
  Help, please.
  
  Kind regards
  Kaja

  the HOST name does not match name the object.

  The host name does not have the name of the topic in the server certificate. He agrees with host.domain name.

• It is good to turn on the printer for a long time?

  Hi all

  It is good to turn on the printer for a long time? It causes health and ink?
  Thank you

  Hi AhamedSajad,

  Are there specific that appeal to you?

  Turn on the printer for a long time would not adversely affect his health. Nor does it affect the ink somehow.
  The ink could get used only when you use the printer to print.
   
  I hope this helps.