It is good to turn on the printer for a long time?

Similar Questions

• is it harmful to the laptop battery to turn on the AC for a long time?

  Hello

  Thank you for reading my post.

  Is - harmful to the laptop battery if I put the phone on during a long period on the current?

  Thank you

  Hello

  the answer is not simple.

  The Lenovo powermanager should do the job for you.

  Maybe you are able to load automatic loading in settings powermanager.

  I Don t know if the option in the new versions of powermanager is chosen as standard.

  Maybe it isn´t a switch or a checkbox, causing the Manager already does.

  But it won´t affect your battery when you leave it plugged in AC.

• I used even to make the Blurays for a long time, with success, with no problems. Today, on my current project (.iso file estimated size ~ 19 GB) MENUS rendering time is reported as 31 + Hrs. Is this OK, or is there a problem?

  My system: 2013 Mac Pro: Core, 64 GB of Ram, two GPU of D700 12 / 3GB. I was creating an ISO image file using ENCORE 6. I am currently using the latest ADOBE CC system.

  The menu on which rendering takes a while has three normal buttons linking to 3 first videos produced. The menu has a long file AUDIO (about 90 minutes) as an attachment.

  After letting the rendering process to continue for 4 hours, on the audit of the progress window, progress bars seemed not to be ahead. I waited 2 + hours of overtime and checked again. Progress bars have been in the same place (no deposit). Activity monitor showed that still was still running. At this point, I cancelled the task. Then, I wanted to just MAKE THE MENUS. It is currently running for the 95 + last minutes. Details 'Render' reported ~29.5+ hours as TIME REMAINING. The number of processed IMAGES currently shows ~ 27000 + showing as 169065 in total. The meter for executives of the ongoing transformation to increment of the above stated figure of snapshot of 27000.

  I think that maybe I should let it continue to operate at the end (i.e. 30 hours of rendering time, if all goes well). Is - this sound NORMAL?

  Any advice will be appreciated.

  Never tried such an audio file for a long time. Are you sure that there is no video movement in this menu?

  What format is the audio file?

• After paper jam, rolls making noises and the printer takes a long time to spit the copy.

  It is an all in one Officejet Pro 8600 and is still under warranty. How can I get fixed roller?

  Wow!  I found the video on how to find a paper jam!    It was a step that was not included on the instructions of the machines, i.e. check behind the print cartridge and the whereabouts of my paper jam!   When everything has failed, read the instructions, eh?

  Thank you!  My problem is solved!

• Purchase second stand-alone upgrade license LR6 not available in stores, is there a way for the user for a long time (since 1.0 more CC) to obtain a second license for both laptop and desktop?

  I've owned Lightroom since it was released when I paid $316,94 for her.  I bought the 2.0 for $103.95 update, then update 3.0 for $69.30 (on another account accidentally) and then joined the CC full suite.  Our Canadian dollar began to decline in value and I didn't feel that the subscription has been good value more, especially since I'm more a clean user of Photoshop and CS5.  I found that Lightroom is useful once again and so I bought last year updated for $88,48 USD and the product has glitches but I used it.

  Recently, I had to install on my Samsung laptop and found, I had to deactivate the license on my desk to use, and I find this pain connection and disconnection, since I do not have the foresight to know when to sign physically out of my office before I use my laptop.  Going to the Adobe store earlier, it does not allow me to buy another license upgrade for my second computer while the 'old' version of Lightroom was fine with me on my laptop and desktop.  I do not have a heavy user for a few years, but I start to have some interest in my work and need the laptop and the computer.  Adobe authorized a second upgrade license, am I expected to buy a full version new or I just go to Corel whose entire suite is less than the Lightroom upgrade?

  Again, I am mostly a Photoshop user and really need Lightroom to catalogue and cropping for final prints only selections, and it seems a little extreme that I cannot use my license on one computer at any time, why not the second?  I think Adobe is assuming we all have easy access to the internet and a wi - fi connection, and that Canadians want to pay twice as much for Adobe products as everyone else.  I installed two trials of Corel since they're cheaper reunited to form a new owner even a Lightroom update still less a total of the purchase, and so far they have integration with Photoshop and the feature settings of catalog, just I don't like not having to learn how to use when I already own another product.

  I'm moving this post on the forum of download, installation, commissioning , who can help with the perpetual software (not creative Cloud)

  It may be helpful to talk to sales http://www.adobe.com/about-adobe/contact.html

  or support: support (please login to adobe.com with your Adobe ID before clicking on the support)

• ORA-06502: PL/SQL: digital error or the value in the conversion for a long TIME on the CLOB type

  Hello

  I have an EA of RDBMS Oracle 11.2.0.4.

  I ger the following error when I try to convert a data type LONG to type CLOB data thanks to a PL/SQL procedure:

  declare
  v_prefix varchar2 (20): = null;
  v_text_view_clob clob: = null;
  long v_text_view_long: = null;

  cursor c_v
  is
  Select
  a.view_name as view_name
  Of
  USER_VIEWS one;
  
  Start
  for r_v in c_v
  loop
  Start
  v_text_view_clob: = null;
  v_text_view_long: = null;

  -Do the SQL code of the view
  Select
  a.Text text
  in
  v_text_view_long
  Of
  USER_VIEWS one
  where
  a.view_name = r_v.view_name;

  v_text_view_clob: = v_text_view_long;

  update of ohibo_views one
  set
  a.view_text = v_text_view_clob
  where
  a.view_name = r_v.view_name;
  exception
  while others then
  dbms_output.put_line ('View =' | r_v.view_name |) "kan niet worden geconverteerd!");
  dbms_output.put_line (substr (sqlerrm, 1, 60));
  end;
  end loop;
  -commit;
  exception
  while others then
  lift;
  end;
  /

  I get the error a specific record:

  View = VER_POLISMUTATIES_VW kan niet worden geconverteerd!

  ORA-06502: PL/SQL: digital error or value

  At looked the origina; Value of type LONG and it is indeed a "long" piece of text.

  However, CLOB has a restriction about 4G * db_block_size and LONG 2 G - 1 according to the documentation.

  I should be able with the method above to convert a LONG in CLOB.

  Anyone had a similar situation?

  Thanks in advance for advice how to solve.

  Kind regards

  PS: my apologies, I didn't know which group to post this discussion: database or PL/SQL.

  Good indeed, a link with the right explanation.

  I didn't know that there was such a function.

  Thank you!

  Kind regards

• not logged on as administrator won't let me connect to the internet for a long time

  My internet provider came home twice and said that its my comp. fault his so slow there or do not access whenever he said that when he sends a 100 files google thrgh he reads 49 errors. also, I was told that when I had Charter a diffrnt internet prvder then swtched to comcast, of that I have made a file that screws my internet I have no idea please help

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• My Compaq presario must be connected to the network for a long time before it can start.

  It flashes green light and tyhen back when its ready flashing will stop. What is a power unit failure?

  Disconnect your PC from the network.

  There should be a switch on the power supply. See the image below. It is the red switch above the LED. You will need a flat head screwdriver to change its position.

  

  Leave the current (voltage) setting to the other setting and then drag it to the initial position (local network voltage). You have just reset your PSU with the procedure I described. If your PC is always the same question, then replace with a new PCU.

  Best regards
  ERICO

• Form diagnosis of prints every time I turn on the printer.

  I recently put in a new cartridge black ink (HP product) and every time I turn on my printer prints a diagnostic sheet - this is the first time that this has happened and I used the printer for about 4 years. Thanks for any help.

  OK, the Photosmart C3180 see the troubleshooting here page.

• I need to know how to disable the test print cause everytime I turn on the printer prints featured.

  I need to know how to disable the test print cause everytime I turn on the printer prints featured.  It is hp1315 series.

  Hello

  If you want to disable printing test page, you must check with the manual of the printer. Try the steps from the following link:

  An alignment Page prints whenever the all-in-one is turned on or off or a print job is started
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01336397&cc=us&DLC=en&LC=en&product=1146336&tmp_track_link=ot_search

  I suggest you to contact HP for better support.
  http://h30434.www3.HP.com/T5/printer-all-in-one-software/BD-p/software

  Additional information:
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c01577197&lang=en&cc=us&ContentType=SupportFAQ&prodSeriesId=360489&prodTypeId=18972

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• All lights on screen Flash - Message - Please turn off the printer and turn it back on

  I'm fighting a problem for a few weeks now with all the lights on the display starts flashing and the message please turn off the printer and turn it back on.   HP sent me a new printer that does the same thing.  The printer is an Officejet Pro 8600.  My computer is Windows 7.  I use a Belkin 750 db wireless router.  I talked to the service the customer several times with no results.  Did a hard reset of the printer, change the SSID of the router, because I think that one of my neighbors has the same router.  The thing most effective I did was change the channel to 6 which will operate for several hours until the display starts to Flash again.  Channels 1 & 11 starts blinking after a few minutes.  I know there are other people who have had the same problem.  I'm about to throw the thing in the trash.  My last printer brand X was set up the same way with no problems.  On the network, there are 2 iPads, smart TV, and an iPhone.  Need help please!

  Super Dave

  Ethernet cable and connection with correction of the problem.  Its been 2 days and the printer worked perfectly.  Please pass this solution on your technical telephone support staff because I know that there are others with the same question.  Thanks for your help.

• What is a good way to use the queues for the model of consumers/producers?

  Hi all

  I am following the model of consumers/producers to use the queue to synchronize the following process: the producer is a loop to produce a number N, I will put each number generated in a table and after each 5 numbers generated, I put the table in the queue and pass it on to the consumer. I have to wait the use by consumers of the data and it will then remove the item from queue so that producers will have the chance to produce another 5 numbers. As I put the maximum size of the queue one, I expect that the producer and the consumer turns to produce / consume all five numbers and the opportunity to another. Here is my code

  

  When the checkbox is false, the code will be

  

  For the first 5 numbers, product will generate every thing right and put it in the table, and it's going to pass the array to the quere so that the consumer will have the chance to loop through the table. I except the procude loop will continue only when the queue is available (i.e. all items are deleted), but it seems that once the consumer starts the loop loop of the product will continue (if the indicator x + 1 and x 2 will be changed to numbers). But this isn't what I want, I know there must be something wrong, but I can't say it is.

  dragondriver wrote:

  As you say in 1, sequency structure to enforce the order of execution, that's why I put it here, in this example, the simple question, I replace the complete code with increase in the number, in the real case, the first markers + 1 and + 2 must be performed in this order.

  Mikeporter says:
  1. get rid of all the structures of the sequence. None of them are nothing but apply a work order which would have been the same without them.

  So even if you delete the sequence structure, there will be a fixed & defined order and it is because LabVIEW follows the MODEL of FLOW OF DATA.

  Data flow model (more precisely in the context of LabVIEW): a block diagram node runs when it receives the required inputs. When a node is running, it produces output data and transmits data to the next node in the path of the data stream. The flow of data on the nodes determines the order of execution of the VIs and functions on the block diagram (click here for reference).

  Now in your code, just remove the sequence structure will not make you order will be going to stay the same, but you need to do some very minor changes (as thread of the error in loop, before that he go to the node "Élément Dequeue").

  Come to the main point: it's a good way to use the queue for the consumer/pmodel that?
  The model you are using (and qualifying as consumer/pmodel) is much too deviated from the original consumer/pmodel which model.

  dragondriver wrote:

  For the second, Yes, it's my fault for delete, though. I'm actually the example of model of producer/consumer design pattern, but I do not pay attention to the while loop in the part of the consumer.

  While loops (two producers & consumers) are the essential part of this architecture and cannot be deleted. You can start your code using standard model.

• Vista has stopped turning the games run for a long time.

  Vista has stopped turning the games run for a long time. The display would go crazy and the sytem would lock. Gotta make a stop with the power button. No errors are recorded. I re-installed the game. Same thing. I reinstalled Vista 64. Same thing. I get about 3 minutes in the game and then locking the. 1 single game still work (BioShock2). COD - MW2 and COD MW lock the sytem. One is direct install, and the other is the steam. I have a video card Nvidia GTX 280 with the latest drivers from Microsoft. Before the reinstall, I tried to install the most recent NVIDIA. Did not help. Yet the locks without showing error. About half of the time it stops at my off video card a few seconds after that the display goes crazy. BioShock uses DirectX 10, and others use DirectX 11. I read on some sites that 11 causes the video crashes on some systems. I want to know is why 11 is working for so long and stop NOW. Is there a way to make the games all run on 10? COD BlackOPS crashes too. I played ALL these games over and over again until the last 3 weeks. If there was some error to post logs I would but there is not. Any suggestions on where to find some kind of problem that could cause this? The video card was removed, cleaned and put back into the computer. Still crashes. 1 in 4 of the games will take place without any problems. 3 will be blocking of the computer and the video trash in 3 minutes or less to start the game. The video is great, until blocking.

  Suggestions on how to fix or where to additional troubleshooting for the cause will be greatly appreciated.

  Try running the memory and the hard drive scan to make sure that both are good.
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  If both check good, the map may be at fault. In which case it is overheating you can manually increase the fan speed in the Nvidia Control Panel.

• How to turn off the microphone for sony hdr-pj260v

  How to turn off the microphone for sony hdr-pj260v

  Hi dstrakal,

  Option to disable the built-in microphone is not available in the camcorder. However, the camcorder has an input jack to connect an external microphone, there are two possible solutions for this:

  1. Connect a microphone with a switch ON / OFF the microphone on the camcorder decision-making. Then, set the switch to the external microphone to the OFF position. This will disable the microphone on the camcorder.
  
  
  2. Connect a dummy stereo mini plug to the microphone on the camcorder Jack.

  If my post answered your question, please mark it as "acceptable Solution".

• printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

  printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

  Hello

  You can find out how to access and change the settings of quality below:

  http://support.HP.com/us-en/document/c01662356

  Kind regards

  Shlomi