Server2012: How to make my windows program to connect to open as a window active?

Similar Questions

• How to make a LabVIEW program auto adjust the resolution of the window

  How to make a LabVIEW program that I wrote auto adapt to any size window.

  You have a few options in fact.

  Right click on the VI icon on front panel (top-right). Then select Properties VI---> window size.

  You can check 2 boxes it: 1 maintain proportions of window for monitor resolutions 2. scale all objects on the Panel before the window resizes.

  I think 1 is the one you want.

  If you are not satisfied by the results, do what I usually do. Create a different front for different resolutions by changing the resolution of your development computer. Detects on the resolution of the computer code target of your executable file, and then open the Panel before which best fits. If a PC has none of the resolutions you display a message that prompts the user to change the resolution, before it run your executable file.

  I hope this helps. I know it is one headache but what else can you do.

• How to make the window disappears after minimize instead of becoming the output of the image?

  How to make the window disappears after minimize instead of becoming the output of the image?

  Hi Sam,

  This issue may have caused due to infection by the virus or system files missing or damaged or because of the corruption of the user profiles. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message while starting?

  3. have you checked if the problem occurs on a different user account?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the Microsoft Safety Scanner and check if there is any threat of viruses found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 2:

  Run the System File Checker scan and check if it helps. This will help you to find and replace missing or damaged system files.

  See the following article from Microsoft Support to run the System File Checker.

  http://support.Microsoft.com/kb/929833/en-us

  Method 3:

  If you have not checked if the problem occurs on a different user account are not, then try again to create a new user account and check if the problem persists. This is to check if the problem is caused due to the corruption of user profiles or not.

  See the following article from Microsoft Help to create a new user account.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  If the problem does not persist in the new user account, then try the steps in the following article from Microsoft Help to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  Please reply with the status of the issue so that we can better help you.

• How to make the Windows 7 network icon to show availability of internet connection? With flashing.

  How to make the Windows 7 network icon to show availability of internet connection?

  Flashing

  Hi RaDiCal007,

  Microsoft has removed the option host connection icon network; apparently drain you resources. Like you, I prefer much the icon 'flashing '.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• How to make a Windows 7 Home Prof. reinstall disk

  HP6000 Series SN3cro380fbk

  Teacher of Windows Welcome.

  How to make a Windows 7 Home teacher  Reinstall the drive if my computer breaks down so I can install a Win 7

  HP Recovery Manager

  http://support.HP.com/us-en/document/c0186712

• How to make the Windows 7 network icon to show availability of internet connection?

  Hello!
  Windows 7 network icon shows no availability of internet connection. Windows Vista network icon showed availability of internet connection with a globe. How to make the Windows 7 network icon to show availability of internet connection?
  Concerning

  Hello kopn,.

  Thank you for visiting the Microsoft answers community.

  The icon for your internet connection, but the animation and the color associated with the network icon in Vista and earlier versions is no design in Windows 7.
  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• If I have a macbook but parallel platform for vmware to run windows for mac, how to make the windows side to recognize the connection wireless from my mac

  If I have a macbook but parallel platform for vmware to run windows for mac, how to make the windows side to recognize the connection wireless from my mac

  Hello

  -You use Boot Camp as the Boot Manager? If so, make sure that all boot camp for Windows 7 drivers are installed.

  -You receive an error message?

  If you use Boot Camp, I suggest yo 1All operations from the below mentioned link and check if the problem persists.

  Boot Camp: Windows 7 Installation, frequently asked questions

  http://support.Apple.com/kb/HT3986

  For reference:

  Support for Boot Camp

  http://www.Apple.com/support/Bootcamp/

  Hope this information helps.

• How to make a windows vista recovery partition

  Hi I have a windows vista desktop computer and I need to do a recovery partition. There is currently no a. How can I make one? My computer has slowed down at the stop and I need recovered

  Hello

  You can't do a recovery Partition.

  A recovery partition is copied onto your hard drive from the computer manufacturer at their factory.

  If you do not have to purchase recovery disc are to make sure that you do not have alreasdy have a recovery hard disk Partition?

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How to make a compatible program for Vista?

  Mr President.
  I have the Microsoft Encarta 2006 version that is not compatible for Windows Vista. Please tell me how to make compatible for Vista.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check the Vista compatibility to the above link and see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Read the information below:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=04D26402-3199-48A3-AFA2-2DC0B40A73B6&displaylang=en

  Virtual PC 2007

  Download the full version of Microsoft Virtual PC 2007.

  Buy and install a Windows operating system earlier (XP, Windows 2000) in the above Virtual Machine and try to run your program in that.
  Vista Home Premium is not supported by Microsoft using Virtual PC above, but Virtual PC will work in it.

  See you soon.

  Mick Murphy - Microsoft partner

• How to make a Windows 7 boot disk?

  I am upgrade Vista Ultimate 32 bit to Windows 7 Pro.  I bought the option to download only from the Microsoft Web site.  (Should have at Staples.) I thought that I would have the opportunity during the initial configuration to select a 64-bit installation.  But none.  Instead, I have to boot from the Windows 7 disk - WHICH I don't HAVE, just the installation files themselves.  I can't install anything until I fix this.

  How to make a boot disk?  (I have no floppy drive, btw.)

  Create DVD installation or key USB from Windows 7 download

  According to what you have downloaded (ISO or .box) and what you have available, you can use one of the links below to create bootable media. Use the methods of USB flash drive, your flash drive must be 4 GB or more and the computer must be able to boot from USB. You could also buy the installation DVD if you wish.

  DVD from ISO - if you downloaded the ISO file use a burning program to a DVD. You can also use the USB/DVD Windows 7 download tool allows you to create a copy of your ISO of Windows 7 file on a flash drive, DVD or USB.
  http://store.Microsoft.com/help/ISO-tool
  http://pcsupport.about.com/od/toolsofthetrade/HT/burnisofile.htm

  DVD from files .box - if you downloaded the. EXE &. Box follow these instructions to make a bootable from download Windows 7 DVD:
  http://www.TomsHardware.com/Forum/1392-63-Windows-upgrade-bootable-guide-having-issues

  USB Flash ISO - if you downloaded the ISO file and you want to install Windows 7 using a flash drive:
  Windows 7 USB/DVD Download tool allows you to create a copy of your ISO of Windows 7 file on a Flash DRIVE or a DVD. To create a bootable DVD or USB flash drive, download the ISO file and then run the Windows 7 USB/DVD Download tool. Once this is done, you can install Windows 7 directly from the Flash DRIVE or a DVD.
  http://store.Microsoft.com/help/ISO-tool

  USB stick installation files - WinToFlash is a practical application that will help you transfer your Windows 7 installation from a hard drive or DVD to USB flash in a few steps. That you can install Windows 7 from a flash card, USB stick, HDD, etc to your computer or netbook. If you have downloaded the .box file extract everything first. If you have a 4 GB or more large USB key (or external hard drive), and the computer can boot from USB:
  http://www.Softpedia.com/get/system/system-miscellaneous/WinToFlash.shtml

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• How to make the window the same size as the linked file?

  Hello
  
  I understand how to do the link and open in a new window on click, but how to make this map open in a window that is exactly the same size as the map png file itself, unlike opening in the same size of the browser window.
  
  http://www.enhancedwireless.NET/company/contact.shtml
  
  and click on the MALAYSIAN route.
  
  Thank you
  KO

  I would do it with javascript. Highlight the link text in Dw, type "javascript:;" in the link box, hit enter, open the behaviors panel, click the add behavior button (plus sign) and select 'Open window' in the menu. In the open browser window dialog box, you can set the height of anf of the window width.

• How to make transparent windows when dragging

  I've done it before, but it does not work now. I'm trying to make transparent windows, when I'm dragging. It still shows the content, but it's just more transparent. This isn't the framework in which it shows just the square outline.

  Thank you

  Goto Control Panel > system > advanced system settings, under performance, click settings
  Now, clearly, the checkbox titled "Content of the Show window while dragging" n click on apply or OK to apply these changes. -Ramesh Kumar http://www.WindowsValley.com

• How to prevent the WIndows Activation when you restore the material in the same FVO

  I just want to know, on a Vmware ESX 3i 3.5.0 on a hard disk crash scenario, when only the hard drive has been replaced.   How yo make an ovf import (backup) that requires no windows activation.

  Please see my answer to your previous question (Re: still Windows Activation required even if the restore of a virtual server on the same hardware)

  André

• How to make a user able to connect only once? and how do I restrict a user authorized to vote only 15 candidates and the brand of vote count?

  Hello

  I'm just doing my project which is the voting system. So my first question is how to make a user or a voter can connect once only using their username and password? After that they brought their vote, they can not be able to connect to a vote. Here, the user name, I replace it with IC and the password I can replace the ID (student ID). Here is my code for the connection:

  <?php
  if(isset($_POST["submit"])){
  $user=$_POST['IC'];
  $pass=$_POST['ID'];
  
  
  $con=mysql_connect('localhost','root','pass') or die(mysql_error());
  mysql_select_db('ses') or die("Cannot select DataBase");
  
  
  $query=mysql_query("SELECT * FROM voters WHERE IC='".$user."' AND ID='".$pass."'" );
  $numrows=mysql_num_rows($query);
  if($numrows!=0)
  {
  while($row=mysql_fetch_assoc($query))
  {
  $dbusername=$row['IC'];
  $dbpassword=$row['ID'];
  
  
  }
  
  
  if($user == $dbusername && $pass == $dbpassword )
  {
  session_start();
  $_SESSION['sess_user']=$user;
  $_SESSION['sess_pass']=$pass;
  
  
  
  
  /*Redirect browser*/
  header("Location: main.php");
  }
  }else{
  echo "Invalid IC Number and ID Number!";
  }
  }
  ?>
  
  

  for the second question is how to limit a voter to vote only 15 candidates and counting of the vote that voters go? When the vote is made with 15, then the popup script appears informed that the elector make themselves with their vote.for this I use box as a method of voting and each checkbox have the id which is the primary key. I appoint the id as 'No' and set it as the primary key. Here is the code for voting:

  <?php
  $servername = "localhost";
  $username = "root";
  $password = "pass";
  $dbname = "ses";
  
  
  // Create connection
  $conn = new mysqli($servername, $username, $password, $dbname);
  // Check connection
  if ($conn->connect_error) {
       die("Connection failed: " . $conn->connect_error);
  }
      
  $sql = "SELECT No, Calon, ID, Jurusan, Image FROM candidates";
  $result = $conn->query($sql);
  
  if(isset($_POST['vote'])) {
      
  //get the ID value from the radio button form field and store in an array.
  $update_vote = $_POST['candidate_id'];
  
  //loop through the array and update the database
  foreach ($update_vote as $value) {
  $vote_sachin = "UPDATE candidates SET Undi=Undi+1 WHERE No=".$value."";
  $run_sachin = mysqli_query($conn, $vote_sachin);
  
  
      }
  
    header("Location:http://localhost/VotingSystem/");
  }
  
  
  ?>
  
  
  <form method="post" id="form1" action="main.php">
  <?php
  if ($result->num_rows > 0) {
  echo "<table border >
  
  
  <tr>
  <th>NO</th>
  <th>Candidate</th>
  <th>INFO</th>
  <th>Vote</th>
  </tr>";
  // output data of each row
  while($row = $result->fetch_assoc()) {
  echo "<tr>
  <td align='center'>" . $row["No"]. "</td>
  <td><img src=" . $row['Image'] . " width=120px height=150px></td>
  <td><br/>" . $row["Calon"]. " <br/>" . $row["ID"]. " <br/>" . $row["Jurusan"]. "<br/></td>
  <td align='center'><input type='checkbox' name='candidate_id[]' value='".$row['No']."'></td>
  </tr>";
  }
      echo "<tr><td></td><td></td><td></td>
      <td><input type='submit' name='vote' value='VOTE'</td>
      </tr>";
  echo "</table>";
  
  
  } else {
  echo "0 results";
  }
  $conn->close();
  
  
  ?>
  
  

  I hope someone can help me with this because I'm still trying to learn this by my own php code...

  Thank you

  # 1, add a Boolean column in the table (VoteSubmitted) and the value initially FALSE to follow if the user has already voted.  Check this field when they connect. If the field is set to TRUE, displays a message and cannot vote again. When they get it vote, update the field from FALSE to TRUE.

  # 2, I would like to do this with javascript to allow them to select all their candidates and submit once. You could start with something like this:

  Cut paste & limit the number of boxes checked script

• How to make a Windows 7 Home Basic PC to recognize a printer HP DeskJet 690C

  Hello

  A few years ago, I bought a Hewlett Packard DeskJet 690C printer and a Hewlett Packard ScanJet 3200C scanner. After awhile, I renewed my PC and its ports were all USB. If I could use is no longer my HP printer and scanner. Today finally I found a parallel cable on one end and the other USB. I also still have the original installation HP disc. But I could not do my PC find or install the program. The original HP program does not load. I'm using Windows 7 Home Basic, 32-bit. I went to the page help from HP and learned that HP always supports DeskJet 690C for Windows 7, but there is no link for the program. I wanted to use the HP recommended program to make my PC find the printer but the program could not find it. After trying for more than five hours, finally my PC shows the printer icon in printers and devices, but when I want to print a page, nothing

  is happening. I would like to know whether a parallel/USB cable works for this kind of problem and if so, what kind of cable. I would also like to know what driver I have to use and where to find it.

  DeskJet 690C S/N: CN86K1K0ST, 3200C S/N: CN98N1C28DPN ScanJet.
  Thank you
  Murat Oguz.

  Of all the research that I did, my experience and to work with clients - cable USB to parallel for printing isn't a very effective method for the use of your printer. It works in theory, but in practice you transfer data from one type to a machine that includes an any other type of information. When these data are transformed, most of the time printing won't work either, or it will show errors. What you can do, but I don't think it will work, is the attempt with the help of a rough rider - following these steps:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers-e-g-Windows-8/How-to-assign-alternate-print-drivers-in-different-versions/TD-p/1957011

  Honestly, I would recommend a more recent material that is better able to understand and communicate with your PC. These machines now come with a variety of features, reduce the costs of printing, as well as from a variety of connection options.

  I would like to know if this information is useful or if there is anything I can do for you!

  Have a great day!