How to make transparent windows when dragging

Similar Questions

• How to make transparent cluster keeping only the elements inside the visible cluster?

  Hello

  Can anyone suggest me how to make transparent cluster keeping only the elements inside the cluster visible in the front panel.

  Thanks in advance,

  Vinciane

  As I said, use the space bar for what is paint. This works. Trust me.

  PS You cannot link to pictures stored on your hard drive. We don't see them. You must add them as attachments and then submit the post they get uploaded to the servers of NOR.

• Factory installed Windows XP OS on a Dell laptop and have a hard disk crash. How can I reinstall windows when there is no CD?

  Factory installed Windows XP OS on a Dell laptop and have a hard disk crash.  How can I reinstall windows when there is no CD?

  Order Dell backup discs for the specific Dell computer model you have. Carey Frisch

• How to make the window disappears after minimize instead of becoming the output of the image?

  How to make the window disappears after minimize instead of becoming the output of the image?

  Hi Sam,

  This issue may have caused due to infection by the virus or system files missing or damaged or because of the corruption of the user profiles. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message while starting?

  3. have you checked if the problem occurs on a different user account?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the Microsoft Safety Scanner and check if there is any threat of viruses found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 2:

  Run the System File Checker scan and check if it helps. This will help you to find and replace missing or damaged system files.

  See the following article from Microsoft Support to run the System File Checker.

  http://support.Microsoft.com/kb/929833/en-us

  Method 3:

  If you have not checked if the problem occurs on a different user account are not, then try again to create a new user account and check if the problem persists. This is to check if the problem is caused due to the corruption of user profiles or not.

  See the following article from Microsoft Help to create a new user account.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  If the problem does not persist in the new user account, then try the steps in the following article from Microsoft Help to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  Please reply with the status of the issue so that we can better help you.

• How to make the Windows 7 network icon to show availability of internet connection? With flashing.

  How to make the Windows 7 network icon to show availability of internet connection?

  Flashing

  Hi RaDiCal007,

  Microsoft has removed the option host connection icon network; apparently drain you resources. Like you, I prefer much the icon 'flashing '.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• How to make a Windows 7 Home Prof. reinstall disk

  HP6000 Series SN3cro380fbk

  Teacher of Windows Welcome.

  How to make a Windows 7 Home teacher  Reinstall the drive if my computer breaks down so I can install a Win 7

  HP Recovery Manager

  http://support.HP.com/us-en/document/c0186712

• How to make the Windows 7 network icon to show availability of internet connection?

  Hello!
  Windows 7 network icon shows no availability of internet connection. Windows Vista network icon showed availability of internet connection with a globe. How to make the Windows 7 network icon to show availability of internet connection?
  Concerning

  Hello kopn,.

  Thank you for visiting the Microsoft answers community.

  The icon for your internet connection, but the animation and the color associated with the network icon in Vista and earlier versions is no design in Windows 7.
  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• If I have a macbook but parallel platform for vmware to run windows for mac, how to make the windows side to recognize the connection wireless from my mac

  If I have a macbook but parallel platform for vmware to run windows for mac, how to make the windows side to recognize the connection wireless from my mac

  Hello

  -You use Boot Camp as the Boot Manager? If so, make sure that all boot camp for Windows 7 drivers are installed.

  -You receive an error message?

  If you use Boot Camp, I suggest yo 1All operations from the below mentioned link and check if the problem persists.

  Boot Camp: Windows 7 Installation, frequently asked questions

  http://support.Apple.com/kb/HT3986

  For reference:

  Support for Boot Camp

  http://www.Apple.com/support/Bootcamp/

  Hope this information helps.

• How to make transparent canvas

  How to make transparent canvas

  Open the layer panel.

  Click on the lock symbol where it says background

  Select all (CMD - A or CTRL)

  Press the delete key

• How to make transparent images in Photoshop

  Hi all...

  I stuck somewhere and I need transparent Image.

  I want to know the procedure how to make transparent images in Photoshop.

  Help, please.

  Thanks in advance

  Remove the background you can see the checkerboard, and save them in a file PNG or GIF.

  This page will tell you how to select the area you want to keep

  https://helpx.Adobe.com/Photoshop/using/making-selections.html

• How to make transparent images in inDesign?

  How to make transparent images in Adobe InDesign CS5.5?

  so if I read you right, you have the image and you want to make the background transparent...

  If so, the application is not possible to use as Photoshop or Illustartor and then import it into Indesign

• How to make transparent psd files?

  How to make images transparent when psd I drag and drop the layer on the stage on flash cs6?

  For example an iv was do what he so far recorded as a psd and then go to the folder to import into the flash library. It's very very time consuming and would be a lot easyer if I can simply drag and drop the layer photoshop on the scene, but the problem is that the image gets a white box around it and that it is not transparent, when I do this.

  
  Is there an option in photoshop or flash to solve this problem and make the background transparent?

  Reminds me of Mario Bros. Yoshi

  I know what you want to do, but as the first answer mentioned, you can do it. Until Photoshop is updated to copy with transparency intact in the Windows Clipboard, you will not be able to do. The reason why I've linked and showed a screenshot of the GIMP is to prove that it is a limitation of Photoshop, not a limitation of Flash or the Windows Clipboard.

  Knowing this, it not there no way for you to copy/paste, drag/drop from Photoshop directly in Flash.

  Cartoon animation is essentially identical to the way most of the games work. You create one large master image that contains all the possible variations of your subject (a face, a car, etc.) and import that into a game. Do you the same thing during the animation, only you keep them all separate instead of a single image.

  Knowing that your experience with Flash is small and growing, I won't make the most optimal recommendation. I'll stick to 2 things that I've mentioned before, but elaborate on them.

  (1) save your assets on real png with transparency, then import them into Flash.

  The reason why I highly recommend this much is due to the function of update of the Flash (I'll explain) and it is possible to automate some (also will be explained).

  So, I grabbed a sheet of sprite in Yoshi and say that I did a new pose as you mentioned. In Photoshop I have then select and copy this new single pose, with transparency:

  

  As you know, once you do that you can bring up a "New Image" dialog box, and it will already have the size of your pixels copied (with adorned transparency):

  

  You can see the size is correct and the preset's Clipboard. After that, you just paste your new image in and clear the background to achieve transparency. Then save you it to a separate file. I always use save for Web to a pinch of optimization of size of files and general control:

  

  Yet once, I realize that it is much more that you want to do, but all of this can be automated which will be explained after virtually making a send operation button.

  Now we have the image as a separate new PNG image with transparency intact. This image should be imported into the Flash library:

  

  Now you have both a separate physical copy of this pose in a PNG file (which can be useful for many reasons) and Flash can use this file with it's built in control of update of the very rapid changes.

  Now say you touch up your a pose a bit. I'll make it really obvious and change the hue of all. You make your changes in Photoshop, follow the same process (even make changes to the original image size), possibly replacing the PNG you created for this installation:

  

  Now in Flash, all you need to do is use the update feature. Right-click on the image in your library, select update. Because it is a file with a physical location, that's all that is needed to change the image in Flash:

  

  The power in this is that if you make changes to dozens or hundreds of png, you can do this command in a single Flash. Select all modified images and press update and all your changes will be made at the time. You can't do this kind of things when you copy and paste directly into Flash.

  That said, almost all of the steps above can be automated using the Photoshops Actions Panel. No need to reinvent the wheel, Actions are explained here:

  http://help.Adobe.com/en_US/Photoshop/CS/using/WSfd1234e1c4b69f30ea53e41001031ab64-7448a.h tml

  I would recommend the Save action once you make your selection rectangle around what you want to save a PNG image. Save up to save for Web and stop there. Then in the future, you press the shortcut key that affect you and it will be part of your choice, open a new document, paste it in, turn off the background for transparency and you will bring to the dialog box in which you can name the image. It's pretty simple and automated. Then just import into Flash and enjoy the benefits.

  (2) use Photoshop to create assets, then another program to copy/paste in Flash

  Is not ideal to have 2 programs need, however if you really want you copy and paste directly into Flash, it is the way to go. Download any program that can read the PSD file format, open your PSD in there. If you have enough RAM this shouldn't really be a problem (PS and GIMP side by side, same open file):

  

  As you make changes to the PSD, just hit reload or go back in your program to support ' copy in transparency ', copy what you need, paste it into Flash:

  

  I'll explain some of the benefits of the previous workflow if you want, but I think that this is the overload of enough information for now.

• How to make a windows vista recovery partition

  Hi I have a windows vista desktop computer and I need to do a recovery partition. There is currently no a. How can I make one? My computer has slowed down at the stop and I need recovered

  Hello

  You can't do a recovery Partition.

  A recovery partition is copied onto your hard drive from the computer manufacturer at their factory.

  If you do not have to purchase recovery disc are to make sure that you do not have alreasdy have a recovery hard disk Partition?

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How to make transparent background

  How to make a transparent background?

  When you open a new file, you can specify Transparent to the background layer.

  On an existing file, after trash the lock of background layer, choose Selection > all and press the delete key

• How to make the Subvi when I make use of the structure of the event

  Hello everyone

  I don't really understand how to make use of Subvi when I use the event structures in vi?

  When just make buttons on the controls Subvi connectors and assign them the vi stops working as I expected.

  I've added an example vi I do not operate as a Subvi.

  Thanks for advantage.

  I think raise you an event to change value via the input connector, that you hope to do. One ugly semi solution is to get the button references and make a Value property (Signal).

  A better solution if you want Hasina events in a subvi is to record user events and send the registry-event thread for the sub - vi, where you can use these events to the event structure. Check that the user created events and examples of dynamic event.

  /Y