Service of NT and heap size

Similar Questions

• vCloud and heap size

  Hello

  looked at this article yesterday

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1004424

  I'm under ESX with vcloud 5.1 5.1. The default size of the heap 8TB refers to the space put into service or used when virtual machines are turned on? And it's a collective number - so the total number of virtual machines with 8 TB of disk not not a VM limit?

  Thank you

  The limit is for all the under voltage virtual machines on a single host.

  According to my experience, it has neither the service, implemented or used space - I think you can get away with a slightly higher use the limit would allow you, if you do not touch parts of the disc. Certainly, he's not only the space used, and we found that the space put into service is a good approximation to calculate when we will hit the limit.

  NFS and RDM are not affected by this limit.

  As far as I know, there are most certainly in VMFS5 where it is probably worse, because the block size should be 1 MB. VMFS3, you could use a block size of 8 MB and extend the limit x 8.

  If someone has any info on when it would be fixed, I'd be happy to know...

• Windows task manager looks completely wrong-it has no tabs for applications, services, processes, performance and put in a network, just a box of size rectangle TASKS WORKING ON?

  The Windows Task Manager seems completely wrong - it has no tabs for applications, services, processes, performance and networking, just one size rectangle box SHOW the TASKS of WORKING ON?  I use it all the time close process and close programs stuborn. None of these options are CURRENTLY available? The only thing I can think is I went to delete one of my readers WD3.0 data and he says it has been used by another program and I've had that happen before and just go close a lot of the process by typing Control, Alt and delete which opens the windows task manager. I recently changed "System Configuration'under'msconfig" Normal startup to "selective startup" and reduce the number of drivers and programs loading to 'Start Up', as he ran 90 things and slow start. "" "» I have no viruses or malware. I changed the "system configuration" back to normal + restart and that he would remove the progams, or processes that have been intefering with the Western Digital HD software. THIS IS WHEN I FIRST NOTICED WINDOWS TASK MANAGER HAS BEEN SCREWED UP.

  But I can't because my Windows Task Manager is just a rectangular box with a single word to the top sayingTASKS!  Without tab with all the other options as in (program, process, services, performance, and network management).

  Would BE AN INTELLIGENT PERSON please TELL ME WHAT TO? I don't want to do a system restore , as I just cleaned it all points this week and just started around and added a bunch of programs and data this week that I let go.

  PLEASE HELP ME TECHE AND MICROSOFT. I PAY $250 p/year FOR THIS DELL ALIENWARE MACHINE LOADED due to it's PERFORMANCE AND THEY WILL NOT ANSWER (1) DANG SOFTWARE ISSUE WITH what THEY ARE PAID. THEY WANT $60 - $100 OR MORE TO ANSWER THIS QESTION FRENCH ANOTER. THEY USED TO, WHEN I COULD BUY GOLD SUPPORT BUT THEY SELL ON THIS MACHINE, SO I'M ON MY OWN AND THANKS FOR THE ADVICE LIKE THIS...

  The Microsoft Support web site.

  The task manager has two different views. For the display that includes menus and tabs, double-click the border of the Task Manager window. To return to the view without menus and tabs, double-click anywhere in the border around the tabs.

  We won't have the information mentioned in the first response of Sandsweep.

  (I confirmed Microsoft's answer worked.) I must have clicked on the edge of the window Task Manager to have switched over to the second, less familiar view.)

• Issue in Java Heap Size

  Hi Experts,

  After changing the size of 512 MB Min segment, 6012 MB Max heap size, PermGem space to 512 MB, we face to the below mentioned question,

  means: Java heap space

  at java.util.HashMap.createHashedEntry(HashMap.java:715)

  at java.util.HashMap.putImpl(HashMap.java:698)

  at java.util.HashMap.put(HashMap.java:678)

  at org.apache.myfaces.trinidadinternal.config.dispatch.DispatchResponseConfiguratorImpl.apply(DispatchResponseConfiguratorImpl.java:95)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._getResponse(TrinidadFilterImpl.java:292)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:239)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)

  at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at com.safex.beans.IECompatibleFilter.doFilter(IECompatibleFilter.java:34)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.wcps.client.PersonalizationFilter.doFilter(PersonalizationFilter.java:75)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.webcenter.content.integration.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:168)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.webcenter.lifecycle.filter.LifecycleLockFilter.doFilter(LifecycleLockFilter.java:151)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

  at java.security.AccessController.doPrivileged(AccessController.java:310)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  means: Java heap space

  to oracle.xml.parser.v2.XMLDocument. < init > (XMLDocument.java:418)

  to oracle.xml.parser.v2.NodeFactory$ NFDocument. < init > (NodeFactory.java:295)

  at oracle.xml.parser.v2.NodeFactory.createNFDocument(NodeFactory.java:286)

  at oracle.xml.parser.v2.DocumentBuilder.setNodeFactory(DocumentBuilder.java:1427)

  at oracle.jbo.mom.MOMParserMDS.parse(MOMParserMDS.java:197)

  at oracle.jbo.mom.MOMParserNonMDS.readAndParse(MOMParserNonMDS.java:71)

  at oracle.jbo.mom.MOMParserMDS.readAndParseSessionDef(MOMParserMDS.java:176)

  at oracle.jbo.mom.DefinitionContextStandard.readAndParseSessionDef(DefinitionContextStandard.java:246)

  at oracle.jbo.mom.DefinitionManager.loadDefObject(DefinitionManager.java:1089)

  at oracle.jbo.mom.DefinitionManager.doFindSessionDefObject(DefinitionManager.java:1155)

  at oracle.jbo.mom.DefinitionManager.findSessionDefObject(DefinitionManager.java:916)

  at oracle.adf.model.binding.DCBindingContainerDef.findSessionDefObjectUsingBaseNameOrSessionDefPackage(DCBindingContainerDef.java:441)

  at oracle.adf.model.binding.DCBindingContainerDef.findSessionDefObject(DCBindingContainerDef.java:431)

  at oracle.adf.model.binding.DCBindingContainerDef.findDefObjectUsingSessionDef(DCBindingContainerDef.java:361)

  at oracle.adf.model.binding.DCBindingContainerDef.findDefObject(DCBindingContainerDef.java:350)

  at oracle.adf.model.binding.DCBindingContainerReference.getDef(DCBindingContainerReference.java:112)

  at oracle.adf.model.BindingContext.findBindingContainerDefByPath(BindingContext.java:1750)

  at oracle.adf.model.BindingRequestHandler.isPageViewable(BindingRequestHandler.java:374)

  at oracle.adf.model.BindingRequestHandler.beginRequest(BindingRequestHandler.java:263)

  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:203)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:128)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

  at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)

  at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at com.safex.beans.IECompatibleFilter.doFilter(IECompatibleFilter.java:34)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.wcps.client.PersonalizationFilter.doFilter(PersonalizationFilter.java:75)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.webcenter.content.integration.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:168)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.webcenter.lifecycle.filter.LifecycleLockFilter.doFilter(LifecycleLockFilter.java:151)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

  at java.security.AccessController.doPrivileged(AccessController.java:310)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Before you increase the Max 6 GB heap size, it is 4 GB. After the question is change us to 6 Gb.Even after that the problem happened.

  What can we do?

  How much we need to increase? (Size of RAM 20 GB, virtual memory: 6 GB, 4 processors, 70%, use of memory virtual. 50% RAM usage)

  Can - I need set the Min and Max Size as 6 GB?

  Is there no changes have to make space PermGem?

  We are using IBM j9 VM Jdk version 1.6.0?

  How can we control java class wicj took more heap? (any tool is here)

  Waiting for your answers...

  Kind regards

  Raj.

  A 64-bit process cannot see that 264 bytes of memory. In practice, most operating systems limit each process to one or more less than the space available address, so that the kernel can handle 64-value which can be pointers to the kernel memory, memory of the process or memory device.

  Maximum segment size of 32-bit or 64-bit JVM seems easy to determine glancing the addressable memory such as 2 ^ 32 (4GB) for 32-bit JVM and 2 ^ 64 for 64-bit JVM. Confusion starts here because you can't really put 4 GB as maximum segment size for 32-bit JVM options to the help - Xmx JVM heap. You get could not create the maximum segment size is not a valid virtual machine Java: error - Xmx. There are several reasons different segment space maximum for the FMV is less theoretical limit and vary from one operating system to another for example different in Windows, Linux and Solaris. I saw some comments on my post of 10 points on Java Heap Space about what is segment space maximum for Java or JVM 32 bit or 64 bit JVM and why Windows allows only of up to 1.6 G memory as the maximum segment etc.   See more about this in frequently asked Questions about the Java HotSpot VM

  The formula I posted is a generic.    MaxPermSize may vary depending on the scope of application, number of JSP pages, classes etc contained in the request.  It may not necessarily be 1/3 or 1/4th of Max Heap which is just a starting point tuning after that we need to see how much more PermSize is necessary.  (However in your case, that PermSize adjustment is not necessary at this time because it is OOM's bunch)

• PowerCLI script for DatastoreCluster, data warehouses and the size info, DataCenter, Clusters

  Hello - I am looking to remove the DatastoreClusters and then list data warehouses as well with their size (total size, used space, free space, put in service, uncommitted space) and the total number of virtual machines on this data store. I would also like to understand what data center and they are on clusters. Is this possible? I might want to limit what is displayed in data warehouses that are 13 percent of free space or less.

  Thank you

  LORRI

  Of course, try this way

  Get-Datastore.

  Select @{N = 'Center'; E={$_. Datacenter.Name}},

  @{N = "DSC"; E = {Get-DatastoreCluster - Datastore $_______ |} {{Select - ExpandProperty name}}.

  Name,CapacityGB,@{N='FreespaceGB'; E = {[math]: tour ($_.)} (FreespaceGB, 2)}},

  @{N = "ProvisionedSpaceGB"; E = {}

  [math]: Round (($_.)) ExtensionData.Summary.Capacity - $_. Extensiondata.Summary.FreeSpace + $_. ExtensionData.Summary.Uncommitted)/1GB,2)}}.

  @{N = "UnCommittedGB"; E = {[math]: tour ($_.)} ExtensionData.Summary.Uncommitted/1GB,2)}}.

  @{N = "VM"; E={$_. ExtensionData.VM.Count}} |

  Export Csv report.csv - NoTypeInformation - UseCulture

• Is it possible to tell what is the heap size JVM is on a 64-bit 2008 Server?

  Is it possible to tell what is the heap size JVM is on a 64-bit 2008 Server? We have a number, but it is unclear if the connection broker has been installed before or after that RAM was brought to more than 10 GB.

  In the register of HKLM\SOFTWARE\VMware, Inc. \VMware VDM\plugins\wsnm\TomcatService\Params they seem to all State

  -Xms128m-Xmx4096m - XX: MaxPermSize = 128 m-Xrs - XX: + UseConcMarkSweepGC - Dsun.rmi.dgc.client.gcInterval = 3600000 - Dsun.rmi.dgc.server.gcInterval = 3600000...

  Although I've seen a show - Xmx1024m

  This could be how say you?

  Also did anyone know if a 4.6 view upgrade will increase the size of segment correctly if the RAM is increased before the upgrade to 4.5 takes place, therefore not having to do a complete reinstall?

  Thank you

  On page 69 of the installation guide, it shows how to change the JVM for X 86 servers.  Maybe this will give you a place to start looking for your current size.  On X 64 if it has been installed with the 10 GB of memory, then would be a chunk of memory to 2 GB size and anything less than 10 GB would result in a segment size of memory 512 MB.

  http://www.VMware.com/PDF/view-46-installation.PDF

• Where are defined the jvm min and max sizes?

  Guess I should know this. ABC, Workbench, dgraph - have been are size minimum and maximum Java virtual machines? I don't see them implemented as part of the command line arguments.
  TIA
  
  Published by: EndecaJoe on October 24, 2012 06:59

  You can increase the size of the segment for Workbench and PlatformServices in setenv.sh.
  You can find these files in
  */Workbench//server/bin *.
  */PlatformServices//Tools/server/bin *.

  For EAC, you can provide arguments in eaccmd.sh heap size
  */PlatformServices//bin *.

  HTH

  -Pravin.

• on heterogeneous Services of Oracle and Oracle Gateway

  Hi all
  
  
  I am very new at this, I want to know:
  (1) heterogeneous services of oracle and Oracle Gateway even or not? Need to license or not?
  (2) want to creating link database to Oracle 11 g to Sybase 15.5 heterogeneous Oracle using the SERVICES what drivers should I install to my pc (windows 7) and my server (Linux red hat 5)? Please give me the link for this
  (3) is there a step by step link to configure odbc to create dblink?
  (4) what's more convenient connection of heterogeneous Oracle or Oracle Gateway Services sybase?
  
  Thank you very much for your help
  
  Concerning
  
  JOE

  Joe,
  Let the copy/paste your questions and comments online:

  (1) heterogeneous services of oracle and Oracle Gateway even or not? Need to license or not?
  Let me first clarify one thing, heterogeneous services is the generic mechanism in the database Oracle used by all gateways. The product you are talking about is database for ODBC bridge or the bridge of Sybase database.
  Database for ODBC bridge is available for Linux and Windows. It is the free product that does not require a license of Oracle. The license is included in your license data. It's a generic gateway which allows you to connect with any suitable part 3 ODBC driver to a corresponding foreign database. As this is a generic connectivity what words connect to real data, but also to MS Excel or text files as long as you have an appropriate ODBC, capacity driver is very limited.
  More powerful bridge is the bridge of Sybase database. It covers the same functionality as DG4ODBC but it also allows you to work with distributed transactions, you can call procedures stored remote Sybase etc.. This gateway is design for Sybase ASE connections, so it is also able to map some Oracle Sybase equivalent functions. This gateway for Sybase database is NOT free, it requires an additional license.

  (2) want to creating link database to Oracle 11 g to Sybase 15.5 heterogeneous Oracle using the SERVICES what drivers should I install to my pc (windows 7) and my server (Linux red hat 5)? Please give me the link for this
  It depends on your preferences. Two entry doors are available for Linux and Windows. When you use DG4ODBC, you must only be careful that you get a suitable 3rd party ODBC driver for this platform with the size of the corresponding word (64 bits for 64-bit DG4ODBC and 32-bit ODBC driver for DG4ODBC installations on 32-bit platforms).
  The latest version of the software is currently 11.2.0.3 and it can be downloaded (and installed from scratch) of "My Oracle Support". Simply open the patches & updates section, look for Patch 10404530: 11.2.0.3.0 PATCH SET FOR ORACLE DATABASE SERVER and make sure you choose the platform you want to use. Then check out the readme file it lists, which of these download CD contains the gateway software.
  BTW, the CD contains DG4ODBC and DG4SYBS and it is up to you to decide during installation of which product you want to use.

  (3) is there a step by step link to configure odbc to create dblink?
  Installation of the ODBC driver is different from one provider to another, and from platform to platform - so we didn't not a note specifies how to configure the ODBC driver. This kind of question is best managed by the provider of the ODBC driver.
  Regarding the implementation of DG4ODBC on Windows, you will find the appropriate information in the knowledge base on My Oracle Support. Just look:
  How to set up DG4ODBC (gateway for ODBC Oracle database) on 32-bit Windows to connect to Oracle databases Post Install [466225.1 Document]

  and to DG4SYBS:
  How to set up DG4SYBS (Oracle to Sybase database entry door) on 64-bit Unix (AIX, HP - UX Itanium, Linux and Solaris) Post Install [437696.1 Document]
  How the installer DG4SYBS (bridge of Sybase database) on a 64-bit Windows [Document 1319852.1]

  (4) what's more convenient connection of heterogeneous Oracle or Oracle Gateway Services sybase?
  It really depends on your needs. DG4SYBS is sullen more easy to install because this gateway comes with everything you need and you don't have to find an appropriate ODBC driver or get the working ODBC driver. It is also more powerful as you can for example use triggers that replicate changes to data in an Oracle database on the Sybase database in the same transaction. When you want to call Sybase stored procedures, you can also do this with DG4SYBS. So it really depends on your needs.

  -Klaus

• 3467K heap size exceed the threshold of notification (2048K)

  Hi all
  Windows 2003 Server
  Oracle 10g express
  
  I am getting this in my alert log at least twice every 5 min. Is anyone know why and how I can remove it. ?
  
  Notification of memory: Cache object library loaded in SGA
  3467K heap size exceed the threshold of notification (2048K)
  Details in the path of the c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_6824.trc file
  Name of the KGL object: select * from (select null table_catalog, decode (o1.owner, 'PUBLIC', NULL, o1.owner) table_schema, table_name, o1.object_name, decode (o1.owner, 'SYS', decode (o1.object_type, 'TABLE', 'SYSTEM TABLE ',' VIEW ', ' VIEW', o1.object_type), 'SYSTEM', decode SYSTEM (o1.object_type, 'TABLE', 'SYSTEM TABLE', 'VIEW', 'VIEW', o1.object_type), o1.object_type SYSTEM) table_type, null null description, table_propid, table_guid, date_created null null) , null object o1 date_modified where ((o1.object_type = 'TABLE' and o1.generated

  The messages are harmless, except spamming the alerts log.

  See MetaLink Doc ID 330239.1 for more details.

  -Mark

• Why are my page and font-size changes when I go to games on fb

  For the last few weeks, when I access games FB, my fonts and page size change and make unusable games. I can load the page, but cannot play the game because the entire screen will not be can not show.

  Reset the page zoom on pages that cause problems: view > Zoom > reset (Ctrl + 0 (zero); Cmd + 0 on Mac)

  • http://KB.mozillazine.org/Zoom_text_of_web_pages

• No sound on DVD playback and the size can be reduced to half of its original size

  Hi, I have a few problems on my DVD player after you install the windows media player 11.
  No sound during playback and the size can be reduced to half of its original size.

  Can someone show me how to fix tat?

  Hello

  you have a codec pack and/or a DVD player separated installed on your system? If not, then try, because play DVD´s with MediaPlayer 11 is not very comfortable and
  you encounter errors, for example you have.

  I suggest you: download a codec pack (for example K-lite or something: http://www.free-codecs.com/download/Codec_Pack_All_in_1.htm) install it and maybe try to use another dvd as "Media Player Classic" player that plays almost every videofile/DVD/etc. that exist.

  Hope I could help you

  Welcome them

• NI Service Update: updates and Service Packs: LabVIEW FPGA Module Xilinx Tools 10.1 2012

  Hello

  I downloaded / installed the latest 2012 LV - everythin fine so far (his grand )

  OR-Update Service proposed the installation of a service pack - download and installation worked too.

  NOR-US also suggested to update the tools for FPGA from Xilinx module, but the download does not work. It looks that the download link is broken?

  Any suggestions?

  Another interesting question: I live in Austria (German), but we use Windows & LV entirely in English in our society. NOR-United States however is highly localized - even the description of the object is in German. While it is OK for me, I still wonder if I could change it to English too.

  (for the attachment: "Fehler beim Herunterl...) ("-"unable to download"online)

  -Benjamin

  
  

• A .cab file needed for installation is not reliable. Please check the Cryptographic Services are enabled and that the cab file is valid .__Help! __

  OK, so I need DirectX 0.9 c to the game red alert 3, but I can't on the new directx installed on my computer because of this error
  A .cab file needed for installation is not reliable. Please check Cryptographic Services are enabled and the certificate file is valid.

  have you tried solutions on how to solve this problem posted by mods on the previous posts with a similar problem, but it does not work for me

  help is appreciated, thanks

  Game of automatic encryption Services Cryptography on AutoServices and then try again to install the program. To set the cryptographic on AutoServices, follow these steps:

  1. Start the Administrative Tools utility in control Panel.
  2. Double-click Services.
  3. Click Cryptographic Services, and then click Properties.
  4. Click Automatic for Startup type, and then click Start.

  Reference: http://support.microsoft.com/kb/822798/ and follow all practices listed in the article.

  Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they could be.

• My Security Center service is disabled and cannot be restarted.

  My Security Center service is disabled and cannot be restarted

  also windows defender' cannot be found.

  [Moved from Community Participation]

  Hello

  What version of Windows are you using?

  What is the exact message that is shown when you click the 'Activate now' button to the center of the Action?

  Make sure the service is started

  Start > type services.msc

  Double-click the "Security Center" service

  Set it to automatic (delayed start) and click Start.

  What antivirus do you use?

  If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  Microsoft Security Essentials has its own version of Windows Eefender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

• A protocol that would provide the service for IPv4 and IPv6 traffic? (RIPv1, RIPv2, RIPng, BGP)

  A protocol that would provide the service for IPv4 and IPv6 traffic?

  • RIPv1
  • RIPv2
  • RIPng
  • BGP

  Hi SandeepTandel,

  ·         Your computer is on a domain network?

  ·         What exactly is the question do you face?

  Here the following protocols provide for IPv4 and IPv6 traffic or respectively:

  Ø Bng supports IPv4 and IPv6 protocols

  Ø RIPng supports IPv6

  Ø RIPv1 and RIPv2 supports IPv4

  Let us know if this information useful.