external drive shows various corruptions of Trojan

Similar Questions

• Window Vista Ultimate 2007 backup files empty on the external drive.

  The computer is a desktop HP running Windows Vista Ultimate 2007, 32 Bit OS, RAM 400 GB and Intel Quad CPU 2 .4GHz.

  I ran Windows Vista backup for a full backup and a backup of the file.  When I look at the external disk to verify the backup files are empty.  There are two created on the external hard drive, but both files are empty.  The program indicates that the backup routine successfully on the external drive. I have not received any error message.

  I use a Toshiba external drive with 500 + GB.  I have a lot of room.  I tried twice.  The first time I reformatted the external drive using Windows and revived the full backup only.  Once again the image file on the external drive shows 0 bytes, 0 files.

  I wonder why the backup files are not getting moved on the external drive.

  Hi BEM Consult,.

  1. are you allowing Windows to choose recommended backup or you choose "Let me pick" option on the backup configuration window?

  We recommend that you connect the external hard drive on another computer and check if the size of the backup file is in the list.

  Check if you have selected all the items in the backup settings to create a backup file. Try to create a new backup file by selecting all items on the Backup Wizard and check the result.

  See set or change automatic backup settings

  Visit our Microsoft answers feedback Forum and let us know what you think.

• New itunes install. All the songs are on an external hard drive. A lot of songs do not show up in itunes, but they are in the folder on the external drive.

  This seems to be a common problem:

  Recently I had to reinstall Win 10 & then itunes. All the songs are on an external HD iTunes does not show a large number of songs that are in the folder on the external drive. I copied the .itl to the new itunes folder. I also tried holding down - from itunes shift - select a library. Any ideas how to be able to see the songs in the itunes on the hard drive folder in the itunes library?

  Thanks in advance

  Steve

  See make a library of portable split. Have you copied the correct .itl file, or should you connect an external hard disk .itl file? If you can find the correct .itl, it should have all your songs and playlists. See the empty/corrupted after upgrade/crash iTunes library when the library has been altered for the first time with the new system. If you have to start creating your new library in an iTunes folder to the root of the external drive and move all the media inside... \iTunes\iTunes Media before adding to the library.

  TT2

• I exported my bookmarks on an external drive. I want to import their return and they do not show when I click Import...

  When I click on import and then open the external drive does not show bookmarks. If I open the external drive via "Start/computer" I can see in it, ok.

  This probably means that the file is not an extension of .html file and you will need to rename the file to bookmarks-2012-09 - 14.html make Firefox the list in the import file selector.
  
  You can see the HTML file type is required in the lower corner on the right.

  If you are unsure of the type of file, then you can open the file in Firefox via "file > open a file.
  
  A JSON backup will appear as a single line of text without line breaks and one backup HTML in a web page with clickable links.

  • A JSON backup begins with: {"title": "","id": 1, "dateAdded": }
  • An HTML backup begins with: <! DOCTYPE NETSCAPE-Bookmark-leader-1 >

• I copied the photo library on external drive, and that one photo now shows despite the file being 70 GB.

  I had a library in iPhoto on an external HARD drive, and it worked. This is a disc plu so I decided to replace it with a new one that doesn't take much space on my desk. I copied the library through an external DRIVE to another drive, and it seemed to work. However, it now shows that a single photo despite being listed in the file manager as containing more than 70 GB.

  I explored a bit further in the file using finder and preview and found many files sorted by date. The photos seem to be all there, but they appear in iPhoto when I switched to this library. Always only one picture appears.

  I decided to convert the copied pictures from iPhoto library and it took a lot of time to convert, but the converted library always display just a single photo in Photos when I switch to this library.

  I could import all of them individually, but it's a big enough job, if there is a way to get libraries to work correctly.

  Any suggestions?

  We need the details - what format is the drive? How is it connected? It serves a TM backup Volume? How you copied the library itself? The library still works fine on the old drive? anything else you can tell us which could help a total strange who don't see you help?

  LN

• My program and other files on my C drive & external drives seem to be "deleted", but the virus scans show that the real files are still there...

  I use Windows Vista and the antivirus software Kerpersky internet on my Dell laptop. A virus 'seems have wiped my desktop and programs files and the directory of my document files, and index on my C drive and my external drive which was attached when you save.' .. that is the index of the two drives is empty shows that no file already exist...

  Kerpesky worked at the time, but he could not stop the attack. However, Karpersky himself was apparently not affected, and when I run that s Karpersky it scanning readings missing files on the C drive and the external drive as being there but appears to any threat of threats...

  I managed to get my office back in a configuration much earlier using a Windows roll back feature that resets the list of programs and some very old directories and older files, but I can't see the previous desktop, nor my current "desktop", or a 'my document' content etc.

  When I jump into Excel and pick up the last file used, that has been saved on my desktop, it chose upward and able to be re-registered, but if I try to view a list of files via Excel or MS Word, none are found.  Another problem is that my backup disk has got so touched.  I am concerned to recover all my files and also not to overwrite anything on my C drive in the meantime. What are the best tools to solve this problem?

  Thank you

  Peter

  Problem has been fixed.  I had a breakthrough last night when I did a bit of research to specific directories and found that files and directories 'lost' were just 'hidden '. I used the Windows tools to display all the files and directories hidden in the C drive and HARD drive and were able to view each of them to solve my problem.

  Thank you very much

  Peter

• All external hard drives showing that raw

  Hi all

  Hope you can help. For the last two days none of my 3 external drives have been showing under 'my computer '. They work fine when I attach them to another machine. When I look at my "Device Manager" readers are here and in "computer management" records show as "simple, basic, RAW, healthy (primary partition) but they have"drive letter"like I said they work perfectly when I attach them to other machines."

  Thank you

  If you changed the partition, Windows Vista has been known to reassign letters local drive incorrectly.  Looking through several docs, let's say if plugged in, unplug it and plug it back to Windows to recognize it.

  It is a doc from Windows 7, but it relates as well to Windows Vista

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/c20721c7-0930-4b08-ab0f-bc98ea8d5cde

  How to automatically assign a drive on Wndows Vista letter

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/how-to-automatically-assign-a-drive-letter-by/86209bae-ec5e-4e04-BA14-8fae73050311

• Transferred XP hard drive to external usb box. Records showing as empty on Win 7 64 system read external drive.

  I can see the folders but contents show as empty. Visible hidden folders option is checked. This drive was my first drive on my old computer which had XP 32 bit. I took the car and put it in a external hard drive Bay, so I could keep my files.

  Getting a family system Windows 7 premium, I am able to see all records, but very few files. Hundreds of pictures that worked on my old computer are now showing "empty folder" when seen on my external hard drive and the new operating system.
  I tried all the hidden and sharing files options that have been suggested. I do not erase all images on the disc, and now maybe 6 hundreds of photos show with all records showing as "empty".

  Help, please.

  Hi Carlscott,

  Thanks for posting your question in the Microsoft Community forum.

  From your problem description, I understand that you are not able to find the files on Windows 7, after the transfer of files from Windows XP hard drive to external USB box.

  (1) what anti-virus program you use on Windows 7?

  (2) you try to connect the external USB box on another computer and see if you can find the files?

  You can deal with this problem because of the Virus on the disk external drive or USB key. If you use an Antivirus program on Windows 7, it will automatically delete the files infected by the virus.  In other words, that there is a risk of data loss. You may also experience this problem if bad sectors are found on the hard drive.

  Step 1: I suggest you run this Microsoft Fixit and check if it helps.

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Step 2: Download and run the latest Microsoft security on the computer Scanner and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Step 3: I also suggest to check the hard disk for errors.

  http://Windows.Microsoft.com/en-in/Windows7/check-a-drive-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Please follow all the steps and if the problem persists, return back and we will be happy to help you.

• Why my imported images show in the catalog wrong even if it is correct on the external drive?

  Don't know what I'm doing here Sorry, first time here.

  I have trouble when I import pictures from my external drive D via LR on my hard drive.  I put them in the selected catalogs created via LR.  They show in the correct catalog on my external drive but are all wrong in my LR catalogs?  I hurt something simple?   I would appreciate any advice.  I am really new to LR too.

  Hi alisonr,.

  I ask you to please take a look at the article: https://helpx.adobe.com/lightroom/help/import-photos-video-catalog.html

  Incase you need special assistance please let us know.

  Kind regards

  Tanuj Sandal

• Device Manager show that this driver may be corrupted or missing (error code: 39) on CD/DVD devices

  Device Manager has a yellow ball with an asterisk on the CD & DVD devices.  My computer does not display a device.  The Device Manager has a message that the driver may be corrupted or missing (Code 39).  It happened after uninstalling Norton and McAfee installation.  I uninstalled McAfee and tried to install the drivers.  I uninstalled and reinstalled the device.  Still no CD or DVD displayed in my count.  Everybody recognizes the problem?

  Original title: CD & DVD devices do not work

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Acomdata external drive enclosure does not show in the Windows 7 Explorer

  I have a case of external acomdata and windows 7 is ok with the driver, but I was not able to see the drive on Explorer solutions, therefore, not been able to access the files on the disk.

  I also have a box external hard drive that I don't remember the name of a hard drive for laptop (a small one) design.

  Both have experienced the same problem

  Before a lot of updates on windows 7 it worked very well on at least two of them maybe more. (clear memory)

  I have 4 computers that have the same problem now, 3 on win7 and the other a windows Xp and they have the same problem.

  Everyone has experienced the same?  Do anyone have a solution?

  Windows 7 is not supposed to need a driver.

  My last solution is a fine of an old computer that might access my files.

  Please excuse any errors on my part, I'm french native and learning English.

  Thank you

  Hello

  ·         How do you try to connect the external hard drive to your computer?

  ·         You are able to view the external drive in disk management?

  I suggest you follow the methods provided below and check if it works:

  Method 1:

  Check to see if you can view the disk external drive in disk management please refer to the steps below

  1. open computer management by clicking the Start button , clicking Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-clicking on computer management.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2 in the l of the component of Navigation , under storage, click disk management

  Method 2:

  I suggest you to change the drive letter of the disk and check see the link below:

  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  Hope this helps,

• Issues of encryption on external drive

  Hi all

  Been a while on here and that's all changed so forgive me if I ask a question has been asked before.

  I have a Macbook Air with El Capitan running. I have an external hard drive that I use for backup and the media and there are 2 partitions and carry media1 & backup1. Today I decided that I would like to encrypt my backups on the partition. During the process, it has failed with an error message. I don't remember what he said. Later however, he said that the score was not recognized and I wanted to initialize. Also my Media1 partition was all messed up showing the names of the folders but nothing inside and wrong icons etc.

  I thought I had wiped or corrupt it. I rebooted and removed and reconnected etc.. Same message every time. Disk utility (which is horrible now) couldn't do anything for me. I was resigned to the fact that she was ruined. But then I disconnected the hard drive and plugged on my work iMac which is still ongoing Yosemite and it is mounted as usual, everything is still there! I am relieved, of course, but when I plug in my laptop does the same thing again, cannot recognize etc. So now I can't see any content on my laptop, but my office is very well.

  I ran a complete repair hard disk in disk utility on my iMac and the two mount very well and I can see everything, but when I put it on my laptop, same error message "the disk you inserted is not readable by this computer.

  Someone has ideas about how to work on my laptop again?

  Wow the answer here!

  Anyway if anyone reads this and has a similar problem, I solved it. I went FileVault and disabled encryption on my main hard drive. Once I restarted my external drive was still legible. I have encryption turned on and everything is fine. It seems if you have your hard drive encrypted, you cannot encrypt your external, or at least that's what caused it in my case.

• I get a 0x000000003b System_Service_Exception shortly after starting... (graphics driver as possible, external drive possible?)

  Not quite sure the cause.

  I was in the shower, my wife tried using my computer and he went to two monitors go black screen. I hardbooted he took.  When he started my vga monitor showed the charger of the bios, the loader of windows, then double black screen for about 10 seconds and then it restarts.

  I reboot with only the vga is plugged, I started having chkdisk running on one of my external USB drives.  I'd get to the user interface of connection and choose profile admin / default and before the screen goes to the office is blue screen with the error above, 10 seconds passes, it restarts.

  I unplug my external drives and still only vga, (and he only ran chkdisk on just an external, not both my references external and not on one of my internals 2.)  and boot it - I get to connection ui - i can choose my profile or my profile comments/woman and he goes to the Office - until it finish loading all the stuff of taskbar, bluescreens on me, the same error and restarts after 10 seconds.

  I start and go to safemode still only vga, I get desktop on my profile but safemode is no way to really "use" a computer. It is stable, so I hope someone nice enough here can help me recover.

  More moderately Pertinant.

  Its Windows Vista 64-bit Acer
  4 GB shared video and system
  NVIDIA 9200 series card
  AMD Phenom triple core
  BESTFIT VGA resolution is 1440 x 900
  BESTFIT connection Polaroid HDMI HDTV resolution is 1920 x 1080
  The HDMI is normally my main video screen

  for these 2-3 weeks I stayed on my profile, have restarted, there a few times and everythings been groovy.
  About 2-3 weeks ago, I updated a bunch of patches, one of them being my nvidia drivers.  -THAT was a huge problem.

  I had the HDMI connected only at the time of the update. After the update - it defined the default resolution as 13xxby768.  My TV do not like this resolution and cannot evolve in it - so it glitches out my TV and says he has a resolution of 1 p. It also disabled supported dual monitor after the patch, if it is used to run monitors separate dualview.  I had to unplug hdmi, vga only in.  change it back to its best fit of 1440 x 900.  the driver blasted nvidia won't let you set resolutions for screens nonhooked upward, and it won't let you turn on dualview without these two things hung or cloneview.  so I flew over my mouse of choice of resolution area, removed the vga, plugged into the socket hdmi, clicked on a random selection and press ctrl + A to apply it. Once the monitor flickered and remained black, I knew I had an another nonscaleable to resolution, I hit down arrow, ctrl + has once again and got on my second try - a few ridiculous low resolution, then put to scale up his goodness was 1080 p best.  Since that time, I wasn't going to the profile of my wife.

  I think that its possible she hit my making usb cable unplugged the external hard drive.  Or it may have been when she has "changed the user" instead of "disconnecting" as repeatedly, telling him not "change user" he had a huge conflict with trying to keep my resolution and possibly default resolutions on their profile which has been forced by the patch (but does not explain why I can return to my office with nothing connected for a few seconds and it's good resolution for vga).

  I tried to read other messages on this forum and it seems that this may be associated with two graphics cards and removal of hard drives.  However, all the stuff on the disassembly of the drives appeared to apply to the winserver 2003, however, I could be wrong.  I wish myself a an extremely capable user but the drivers and hardware are 1up me.  Thanks a lot in advance to anyone who can help me.  If I need to do a dump or something, to give you more information, would you please tell me how to do this - I know very well my way around safe mode.

  Hello children of the light.

  Thank you for your message.

  You can check your profile for corruption:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Import the external drive, indicates each clip

  When I import media in FCPX from an SD card, I am able to select the appropriate folder that contains my support.

  After a meeting, the first thing I do is to empty the gross support on an external drive.  If I try to import media for this drive, every single clip on the entire disk, no matter which folder it is located, appear in the import window.  I can't simply navigate to the folder that interests me.  Is there a setting I'm missing?  Any help would be appreciated.

  Put the contents of the card in files rather than the level of the root of the drive. If the application considers DCIM and AVCHD, it assumes that it is watching a disc of the camera and show all available media.

• Error to imovie 11 project external drive

  I try free hd space by attaching a mac format external hard drive and moving projects imovie inside the imovie holding down the cmd key project view. But since the project contains clips with built in audio effects, titles, etc. that is part of iMovie itself (at least I think that's the reason why) it gives error message - 43 say he couldn't move the ringing or the nail. He then shows the project as if it is moved, but restart imovie it is back to its original location again. Grateful for any idea that you could share...

  Sounds as if you do it right, but just to be safe here is a link to instructions by AppleMan 1958.

  How to move or copy projects and events on an external drive? (Version 9 and earlier)

  Note his comment about an error

  For existing projects, you can move it using these instructions.

  http://help.Apple.com/iMovie/#move7d66613

  There is an error in the guidelines where it says drag the icon of the project to the icon in the event library. You should rather look for your hard drive icon in the project library.

  Generally, the event takes more space hd project then you can consider moving events as well.