service on the laptop cover

Similar Questions

• Can't separate the top cover to the base/motherboard to replace the RTC battery on laptop ZD8080US

  I am trying to replace the RTC on a Pavillion ZD8080US battery.  I proceeded with disassembly in step 11, page 5-33 Maintenanceand Service of Guide.  I am now unable to separate the top cover from the rest of the laptop.

  I can get the left side of the image of the base but even with what appears to be excessive force that I can't get the right separate about 1/4 "without making me concerned that I'll break the cover.   (The right side of the cover is folded about 10 degrees when I'm trying to force it).  I tried some jiggling and a few twists to see if that would open invisible conflicts but with no luck.  I used the tree of a screwdriver between the parties to try to increase the force.  All to nothing does not.

  Coverage seems to be stuck/attached to a 4 "- 5" to the top on the right side.  It acts like a screw that has not been removed.  I don't see anything when I peer into the hole when the two parties are discarded.  Is there any adhesive which can be between the parties on the right side?

  I examined the process of dismantling four times.  I counted the screws that came out.  I revamped to all the screw holes in the drawings and made sure there is no screws in the holes.

  Am I missing something?  Is there a step or a comment has been omitted in the text?  Is there a screw hidden under the model or label of Windows?  Is there one thing that others have found to accomplish this separation?

  I appreciate any help I can get.

  Thanks in advance.

  http://h20574.www2.HP.com/results.htm?SID=434660&MEID=0CB6F826-C110-473D-A294-67807AF06D45

  Here's a direct link to the media library from HP _ make you and signed forwards click the link.

  Give it time to load and select "COVER" in the left column.

  Here is the link to the library as well.

  http://h20574.www2.HP.com/default.htm?lang=en&cc=us&hpappid=psml

  After watching the video, it looks like you missed a few screws. (certainly enough of them _ typical HP)  HP laptops must be 'broken' even if all the screws have been removed, but yours seems to just raise, so it seems that you missed a few screws.

• HP 15 laptop: hp 15 need of replacement parts for the screen cover and hinges

  Not sure if this is the right forum. Dropped my laptop HP 15 t-r160 and the need to replace the LCD (blue) plastic hood and side rails metal/hinges. I found the LCD and ordered him, but I can't seem to find the exact parts, I need to replace all of the coverage and the hinges of the screen for this model. Help! I thank in advance?

  Page 20 of this manual:

  Manual

  has an exploded view of the display Assembly subcomponents. Don't know if you need the frame (bezel) or the plastic cover of the laptop (attachment) or what color that is why would the list of parts you need.

  Post back once you know the parts you need and we can help you locate them.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Brand of keyboard on the laptop screen, do I need a cover for my Touch U430?

  I was online recently and noticed some users ultrabook talk how to have their ultrabook in a bag with many other things had pressed the keyboard of it against the screen, branding of dye. I'm a little worried, can happen with my U430 Touch that I will keep manual with it, however, will be behind her, they will be separated by a thin layer of the bag. Someone at - he heard talk about what is happening and I should invest in a keyboard cover sheet to avoid this?

  Thanks in advance!

  PS: I love the U430 Touch, LENOVO GO!

  Hi DesertFox899,

  Welcome to the Community Forums of Lenovo!

  According to the question that you provided if the laptop is under pressure in the bag and as it is a model to screen touch there could be opportunities for brands of keyboard, I suggest you to use a keyboard protection to avoid further damage.

  Publish us back for other queries.

  Best regards

• Unable to connect to the laptop, receive error message "the user profile service failed.

  can not connect to the computer

  * original title - I can't connect on the laptop when I put in password says the USER PROFILE SERVICE FAILED THE LAGOON AND DO CAN NOT BE LOADED a *.

  Hi vincentbyrne

  
  What operating system is installed on the computer?

  You can refer to the link below and use the provided steps to identify the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  
  If you are using Windows Vista or Windows 7 based computer you can see Microsoft article provided below and check if the measures help -.

  http://support.Microsoft.com/kb/947215

   

  I hope this helps.

• I just formatted my laptop and every time I try to intall service pack 1 for windows vista as it gets installed but when I turn the LAPTOP works again it ask me to update?

  I just formatted my laptop and every time I try to intall service pack 1 for windows vista as it gets installed but when I turn the LAPTOP works again it ask me to update? What should I do

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you here what Service Packs, if any, are already installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• Cover of the laptop... The width?

  Hello
  

  I know this may seem a silly question to some people

  But it is a question which has been so annoying for 4 months now.

  I was wondering if someone could tell me please... How broad are we supposed to open our mobile eyelids?

  I always use my laptop in the same place - Kitchen Table

  I'm rather small, and the kitchen table is a bit high for me.

  If I had to use my laptop with the lid open to an ideal of 90 degrees ... I see that everything is perfect!

  for example

  Colors would look correct

  No problem with the reflection of light

  However!

  Whenever I see portable computers used by friends, relatives or on TV... The lid of the laptop is always open much wider

  e.g. 110 degrees

  For this reason...

  I had trouble using my laptop when the lid is opened a little wider than 90 degrees.

  Probably more at 100 degrees

  I really want to use my laptop with the cover to 90 degrees

  But before you do...

  Can someone tell me please... What is the correct angle \-- for a laptop to be open lid to? 

  Thanks in advance!

  Laptop... HP Pavilion... DV7-1055ea (Vista Home Premium)

  There is no angle correct / specified to open the lid of the compartment... it's just what works for you.  The best angles of vision are usually between 90 ° and 120 °

  Just so ignore everyone and how you want to use it!

• Hello, I just bought a new windows 7 service pack 1 than my windows that has been said in the laptop it was not authentic, but I bought a 64 bit instead of 32 can I use a 64-bit on my laptop

  bought a new windows 7 service pack 1 as my windows that has been said in the laptop it was not authentic, but I bought a 64 bit instead of 32 can I use a 64-bit on my laptop

  my laptop is a lenovo

  On Sunday, October 5, 2014 12:59:11 + 0000, dougdgp wrote:

  bought a new windows 7 service pack 1 as my windows that has been said in the laptop it was not authentic, but I bought a 64 bit instead of 32 can I use a 64-bit on my laptop

  my laptop is a lenovo

  Depends entirely on this laptop you have. If it has a 64-bit processor
  You can use 64-bit Windows. If a 32-bit CPU, you can't.

  If you don't know you have, hold down the Windows key and press
  Break | Break. It will tell you if you have a 32-bit
  processor or 64-bit processor.

• Exception error of system service after the reset of the HP 2000 laptop to factory settings

  Hi a problem with PC laptop computer hp laptop 2000. Was the laptop of my father, but he did something that he had a friend he guy reboot the system at factory. Then I got it back I applied Att uverse macfee security and now it continues to occur a problem him stops. Say "system service exception. Help please it bought it I can use it for training continues for my care permit. Hellllp please! Oh also something is blocking updates, I noticed it says failed.

  Original title: problem of Windows 8

  Suggest you try first uninstall MacAfee Antivirus software and see if the problem stops. If not, update the system and avoid the installation of MacAfee.

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  How to refresh Windows 8:

  Here's what happens when you refresh your PC:

  · Your files and your personalization settings do not change.

  · Your PC will change back to their default values.

  · Applications on Windows Store will be kept.

  · Applications that you have installed discs or sites Web is removed.

  · A list of removed apps will be saved to your desktop.

  These steps will take you through refreshing your PC:

  · Press the Windows key + C on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  
  

  · Click change PC settings

  
  

  · Click general in the left column

  · Under refresh your PC without affecting your files, click Start

  
  

  Then follow the instructions that will be provided on-screen to cool your PC.

  You can use the built in Antivirus which comes with Windows 8:

  http://techingiteasy.WordPress.com/2013/05/29/how-to-turn-on-Windows-Defender/

• How can I get my external screen to show the cover of my laptop is closed? How to stop the laptop asleep?

  I want to use an external monitor via HDMI to my MacBookPro.  But I want to close my laptop and whenever I do the laptop just goes to sleep and the external screen goes black.  What should I do to make the laptop on when I close it up? >

  Thank you

  Connect a USB keyboard.

• Service usage profile does not logon, user profile cannot be loaded. Administator account not affected, no one else on the laptop.

  I have checked forums for the resolution, but do not have access to the button start because there is no other users have the laptop so can't start suggested solutions.  Am running Windows Vista and I wonder if this problem could be connected to the fact that I had to restore my laptop to factory settings the week last for another problem.  I have a complete upward (to make this last week before the restore to factory settings), so if I can get around the screen just to uninstall Windows connection, maybe I can re - install and the problem will be solved?

  Hello

  I would just delete the update of Google.

  Remove the update
  http://www.Google.com/support/pack/bin/answer.py?hl=en&answer=53402

  What is google updater and why its operation?
  http://www.pctipsbox.com/what-is-Google-Updater-and-why-its-running/

  I hope this helps.

  Rob Brown - MS MVP: Bike - Mark Twain said it right.

• Re: Satellite R630-155 - part number for the LCD cover

  My 3 year old belle has hit my R630 on the floor and the plastic LCD casing/lid is now broken. Hinges are fine, the screen is fine - I just need to replace the plastic cover. How find the part number or get a new one?

  Thank you.

  Hey,.

  Here you can get t numbers because it s a forum for owners of Toshiba laptop only. If you can speak with normal people like you and me here.

  If you need these technical details such as part numbers, you will need to contact a service provider authorized in your country. Guys have access to databases of Toshiba and can give you the exact reference and order this part too.

  Good luck! :)

• How to remove the rear cover to the hard drive.

  I own a laptop, a HP Pavilion dv6, System ID 3583, product ID LY076UA.

  When you turn on the laptop hard disk cover has no screws, it seems to be stuck in the chassis. What to do, take a knife and try to lift up?

  All the diagrams that I find slightly different models shows screwed on covers HD online.

  I also need to replace the fan, I would not mind a maintenance manual appropriate.

  Hello

  This is the HP Pavilion dv6 Maintenance & Service Guide. There's a latch of service you must release to access with the optical and hard drive. This is why there is no screws.

  

  

  Best regards

  ERICO

• dv5-2070us screws for hdd insecure on the laptop

  I watched the service manual for this laptop and images on hard drive showed the screws to secure the hard drive on the laptop, but hard drive of my notesbook does not have slot machines, a carter or holes to put the screws on. The hard drive is just lying with cable connection on the motherboard.  Without screws to fix the hard disk, it will be sensitive to vibrations or 'clash '. Could be a factor for the hard disk to fail?

  A question unrelated to problem laptop let l. can reach us screenshots in our messages? Thank you.

  Yes you can attach screenshots. There are icons in the toolbar above the 'Show the Message' box, and one to the right the 'link' is to display images.

  You need a rubber bumper and a servant like this:

  http://www.eBay.com/ITM/HP-14-5-Pavilion-dv5-2000-genuine-hard-drive-caddy-with-connector-cover-GLP-/251637743206?PT=US_Drive_Bay_Caddies&hash=item3a96c73e66

  Those who lack your laptop?

  See Page 60 of the manual. 'S called it the "insulator" which sounds like a movie with Arnold Schwarzenegger.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• ENVY dv6 problem on the botton cover screws

  I recently purchased a dv6 HP ENVY to the United States, however, I moved to the Brazil and I can't use the support of security on my laptop. In the botton cover, there is a screw which does not where it is supposed to. I wonder if it is possible to replace this screw.

  Here are some pictures:

  

  

  So, what can I do?

  Hello

  I have the same series but the screw is somehow attached to the lid and there is also a small source. Repair shows the coverage of service without any screws so can't tell you what exactly it is. I suggest to buy a few screws on ebay like this:

  http://www.eBay.com/ITM/320-laptop-screws-set-IBM-HP-Toshiba-Sony-Dell-gateway-Lenovo-Samsung-ThinkPad-/110912953774?PT=LH_DefaultDomain_0&hash=item19d2ed5dae

  The screw is certainly a phillips 2.5 and length is 11 or 12 mm. 2.5x12 is defined in the screw.