Service Pack OS supports for the Essbase Server

Similar Questions

• Windows XP service pack 1 fails with the error "server has not responded.

  After that a delay of a minute or two, running the SP1a update .exe (sp1aexpress_usa.exe) well failure I have an active Internet connection

  It does not work every time with a "the server has failed" after telling me that this error has occurred when trying to download files from XP Service Pack 1.

  I tried four times over a period of three hours is not an appearance of time.

  Thank you

  Jim

  Hi Jim,.

  If you already have the Service Pack 1 (SP1) is installed, we do not recommend to install SP1a. Instead, I you suggest to download and install the Service Pack 2 (SP2) and then update SP3 to continue to receive.

  For how to obtain the latest service pack, see How to obtain the latest Windows XP service pack

  See also: information about Windows XP Service Pack 3

  Note: The Support for Windows XP with Service Pack 2 (SP2) will end on July 13, 2010. If you are running Windows XP SP2 after support ends, you will not receive updates of security for Windows. To maintain your Windows XP computer up-to-date download Service Pack 3 via Windows update.

• Update of security for the SQL Server 2005 Service Pack 3 (KB970892) does not load.

  Someone at - he found a way to load it correctly?

  Hello

  Welcome to the Microsoft Vista answers Forum!

  Try the steps below and check if the problem is resolved,

  Download the stand-alone package of "A security update to the SQL Server 2005 Service Pack 3 (KB970892)" from the link:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=0d878f4b-71e8-4170-9a14-1bce684811ce&displaylang=en

  Now you must install the update in safe mode.

  Restart the computer using safe and then by running the Setup program

  The next step to install the program in safe mode is to restart your computer in safe mode, and then run Setup from the hard drive. To do this, follow these steps:

  1.

  To start Windows in safe mode, follow these steps: one. Click Start and then click on stop. b. Click on restart the computer and then click OK. c. To enter the safe mode of Windows Vista, the computer starts to press on and hold your "F8 key" which should show "Windows Advanced Options Menu" as shown below. Use your key to move to "Safe Mode" and press your enter key. d. When Windows starts in safe mode, click OK. Now try to install the update and check for the issue.

  If the above provided steps fail, then you need to visit the link provided to connect with the following technet forum:

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Error code 64 c for update of security for the SQL Server 2005 Service Pack 3 (KB2494113)

  Have tried to install KB2494113 - update of safety and he constantly fails to install. Help please as I know very little about the "intricacies" of my laptop

  Hi Phillipmuir,

  Step 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2:

  You can also check the following link and try to download and install the standalone update package:

  Update of security for the SQL Server 2005 Service Pack 3 (KB2494113)

  Hope this information is useful.

• Update of security for the SQL Server 2005 Service Pack 3 (KB970892) constantly moved, what can I do about it?

  Update of security for the SQL Server 2005 Service Pack 3 (KB970892) constantly moved, what can I do about it?

  The update tried to automatically install dozens of times, but it keeps failing, is there something I can fix which will allow this facility. I have reasonable computer skills but I'm not good at that, I need step by step help and a full explanation of acronyms.

  Hi Laurence,.

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

  I hope that helps!

• Where can I get a link for a copy of windows vista Service Pack 1 support only computer

  I had to reformat my hard drive of the computer.  I am running Windows Vista Home Premium and try to update to Windows 7 Home Premium.  I saved my files for a western digital 500 gig external hard drive that does not load the drivers in Windows Vista and do not see my drive on my computer to transfer my saved files.  All the files that I see in microsoft tell me how to load sp1 but do not include a link to get the update for service pack 1-vista 32

  Windows Vista Service Pack 1 (SP1) - 434.5 MB
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en
  Windows6. 0-KB936330-X 86 - wave0.exe

  Windows Vista Service Pack 1 for Windows Vista 64-bit (size: 726,5 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=874A414B-32B2-41CC-BD8B-D71EDA5EC07C&displaylang=en
  Windows6. 0-KB936330-X 64 - wave0.exe

  Windows Vista Service Pack 1 - language standalone DVD ISO
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=a45652b1-E838-420a-b065-83960458e2ec
  6001.18000.080118 - 1840_iso_client_sp_wave1-FRMCSP1_DVD. ISO - 1418,1 MB

  Important: things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  added-

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  Information about Service Pack 2 for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  How to get the latest Vista Service Pack
  http://support.Microsoft.com/kb/935791

• Software support for the Dell Management Pack Suite - Dell VRTX SNMP monitoring

  Hi-

  Anyone know where I can get the support for the continuation of the Dell Management Pack - Dell Poweredge SNMP monitoring in SCOM VRTX?

  Thank you

  Hello

  Please visit our Dell Tech Wiki Page for more information on Dell Server Management Pack and forum for your comments and observations.

  Thank you

  Srinivas Carlos.

• Need a SMTP service for the web server running Windows 7 Professional SP1

  The remote server administration tools package seems to work only for the management of Windows 2008. I have a web server running on Windows 7 and want to integrate the messaging service. IIS 7.5/7.0 does not include this feature. Now that are remote server administration tools installed, I tried to use the feature of IIS 6.0, however, a message is displayed to indicate that I don't have the SMTP service is installed. I checked the 'Server' SMTP under functionality after installing IIS 6.0 from the admin of remote server Pack. This does not install the feature. Could someone give information on how I can install email/mail service or function to use with my domain name on Windows 7 Professional SP1? Thank you.

  Microsoft recently released an update for the Remote Server Administration tools work with domain controllers running Windows Server 2008 R2 SP1.

  You can download it at the following link:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=7d2f6ad7-656b-4313-A005-4e344e43997d

  For further assistance, please post in the following forum:
  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

• CVI RTE 2013 (without service pack) is supported on Windows XP SP2?

  Please note the links below and the description of the operating systems supported for the CVI RTE 2013 and CVI RTE 2013 SP1.  CVI RTE 2013 description is "XP 32-bit" and the description for the CVI RTE 2013 SP1 is "XP (SP3)".  Does this mean that the ICB RTE 2013 (without service pack) is supported on all 32-bit versions of XP including XP (without service pack), XP SP1 and XP SP2?  Thank you.

  http://www.NI.com/download/labwindowscvi-run-time-engine-2013/4105/en/

  LabWindows/CVI Run - Time Engine 2013 - R2 Windows 8/7/Vista/XP 32-bit/Server 2008 R2 64-bit/Server 2003 32-bit

  http://www.NI.com/download/labwindowscvi-run-time-engine-2013-SP1/4561/en/

  LabWindows/CVI Run - Time Engine 2013 SP1 - 8/7/Vista/XP (SP3) to Windows 32-bit/Server 2008 R2 64-bit/Server 2003 R2 32 bit

  Hello, Dan

  According to the Readme, LabWindows/CVI 2010 SP1 supports Windows XP SP2 (32 bit). Thanks for that bring to our attention.

  Best regards,

• com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: connection to the Essbase Server error

  Hi Experts,

  I am trying to load metadata from Oracle for Essbase.In the Essbase database server, to all the credentails are correct. In the model, I use OracleDIAgent (no local agent), context Global RKM Hyperion Essbase.

  In the execution, beginning the reverse is default and get the error below.

  org.apache.bsf.BSFException: exception of Jython:

  Traceback (most recent call changed):

  File "< string >", line 58, < module >

  at com.hyperion.odi.essbase.ODIEssbaseConnection.connect (unknown Source)

  at com.hyperion.odi.common.ODIModelImporter.importModels (unknown Source)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: error connecting to the Essbase server. Error message: unable to connect to the olap service. Unable to connect to the Essbase server. Error: Essbase Error (1051293): connection fails due to invalid login credentials

  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)

  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)

  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)

  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)

  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)

  at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)

  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:366)

  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)

  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:292)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:855)

  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)

  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)

  at java.lang.Thread.run(Thread.java:662)

  Caused by: Traceback (most recent call changed):

  File "< string >", line 58, < module >

  at com.hyperion.odi.essbase.ODIEssbaseConnection.connect (unknown Source)

  at com.hyperion.odi.common.ODIModelImporter.importModels (unknown Source)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  Thank you

  Mady

  I think that the error does not tell you the question

  com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: error connecting to the Essbase server. Error message: unable to connect to the olap service. Unable to connect to the Essbase server. Error: Essbase Error (1051293): connection fails due to invalid login credentials

  
  

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• The Service Pack installation failed with the 0x8e5e03fe error code.

  Hi all

  I'm not able to install Windows Server 2008 R2 SP1, when I install SP1, its going very well up to 90%, after that its giving the below error.

  ' 1. the Service Pack installation failed with the error 0x8e5e03fe. ".

  2 "changes in an update (Service Pack for Microsoft Windows (KB976932)) failed during the installation of the Service Pack.

  Identity: Package_for_KB976932 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.17514

  Error code: 0x8e5e03fe

  State: 7 "

  I took the following steps to resolve. but it's not helping me.

  1. I CA anti-virus, I disabled the Agent Client of CA.

  "2. I installed Windows analysis tool, but I did ' t get any error, under the errorlog for your reference."
  =================================
  Preparation of control system was updated.
  Binary version 6.1.7601.21645
  Package Version 11.0
  2011-04-16 15:49

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Summary:
  Seconds executed: 753
  No error found.

  3. I ran this commond ""dism / online/Remove-Package /packagename:Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 " "

  Please help me

  Concerning

  Ganga

  Hi Ganga,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums. Please post your question in the Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Cannot install on XP Pro SP3: "Service Pack 3 Setup error - the system cannot find the file specified."

  I am trying to install SP3 on my XP Pro.  I get a notice on my screen, stating: "Service Pack 3 Setup error - the system cannot find the file specified."  Don't know what I'd do.  Thank you.  Peter glass

  That's good news. I think you also need to analyze of rootkits being on the right side. So, now:

  Search for rootkits with a program SPECIALLY designed to detect and remove the (aswMBR):

  http://public.avast.com/~Gmerek/aswMBR.htm

  Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.

  Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).

  And finally, leave your PC on overnight and search for viruses, using this site:
  http://www.eset.com/us/online-scanner/
  Once we are convinced that your PC is clean, here are my instructions (just in case where you still cannot run batch of Geek-Tech file, etc.):

  1. download the installation of SP3 and IE8 (beforehand) files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links for the installation files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  (You need to install IE8 AFTER SP3! Trust in me.)

  IMPORTANT NOTE!

  It is VERY important to ensure that Internet Explorer is at the level IE6 before installing SP3. In case you have IE7 or IE8, you must uninstall it / them, using the Control Panel Add / Remove programs. Let us know if you need assistance with this.

  Once again:

  Make sure that IE is IE6 level before installing SP3. You can go directly from IE6 to IE8 after SP3 has been installed.

  2. disconnect Internet. Also unplug all unnecessary devices.

  3. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  4 set up a clean boot. The last thing you need is for a program that runs in the background to interfere with these updates! (It happens!) For more information:

  http://support.Microsoft.com/kb/310353

  (Note that this is the same as setting up a "Diagnostic boot.")

  Reset.

  5 install the SP3. Restart TWICE.

  6 switch to IE8. Restart TWICE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  7 unscrew the clean boot. (That is, return to the Normal startup).

  8 make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  9 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  10 re - enable automatic updates.

• RDBMS for Hyperion Essbase server change

  Hi all

  We installed and configured 11.1.2.2.100(Essbase, EIS, Studio, Services partagés) on Windows 2008 32-bit server successfully.

  Everything went well and all the products work.

  Now, we have changed the RDBMS for Hyperion Essbase server and ran the configuration once more with the new RDBMS server with option "reuse existing tables.

  H1

  | First current

  DB1 -> DB2

  Therefore, we are unable to access the essbase server.

  We have seen users of Shared Services. All users are able to connect to Shared Services, EAS but problem with Essbase.

  In the table of HSS_Component is the old name of the server in two places, we have updated the old name of DB server on behalf of current server DB.

  When we try to access essbase we get the below error (tried with the host name, ip address, EssbaseCluster1 as the Essbase server)

  Error network [10061]: unable to connect to [Server Name: 1423]

  Error: 103: unexpected error Essbase 1030818

  Error: 1042006: error network [10061]: unable to connect to [[servername]: 1423]

  Error: 1030818: failed to connect. Please check if the server and port are correct. If you have received failure timeout or handshake.

  Please check if you tried to connect to a secure Word keyless secure port or disable port with the secure key word.

  Please help me solve this problem.

  Thank you

  Alain

  It is extremely important that you know what you are doing before you touch the registry of shared services and the correct way is to not update the tables, is to use the epmsys_registry utility.

  To be honest you can have messed up the registry and it is something I will not get involved in, try to talk with Oracle, what you just did.

  If it is only the name of the RDBMS server change (not the essbase server) then you must follow the instructions in the documentation - change shared Services and connection of database registry and the password information

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Problems with the configuration of the Essbase Server

  Hi all
  
  -J' have a simple environment with a single Foundation Server with only the Foundation services running on it (only the basic components installed). On the same Essbase server, I installed (by default) foundation and Essbase components.
  -I am facing a problem with the configuration of the Essbase server. All steps complete with the exception of the last step: deploying web applications (APS and EAS) to the WebLogic Server.
  -FYI, I am deploying the web application to the existing domain created on the server of the Foundation. As all products must be on the same domain.
  
  
  During deployment, the WebLogic administration server reports the following error:
  
  BEA-149003
  Cannot access source application information in /opt/shared/apps/hyperion/Oracle/Middleware/EPMSystem11R1/products/Essbase/eas/server/AppServer/InstallableApps/Common/aps.ear for application "APS".
  The specified error is: there is no file of the application.
  
  
  Now the path and the above files exist on the Essbase server, but not on the server of the Foundation. So after playing with the WL administration console and reading of Sandeep post [1], I came to the conclusion that:
  1. the Essabase components must be installed on the Essbase server, but not configured.
  Now, this means that I need to install all the components on the server of the Foundation, even though I only will use to deploy the services of the Foundation which seems a little ridiculous?
  2. create a new domain on the Essbase server, so the EAS/APS will be deployed on the Essbase server - but will not be on the same domain as the other products.
  
  Well, I am a newbie with WebLogic and so would welcome your valuable contributions!
  
  
  Thanks in advance...
  
  
  References:
  [1]. http://sandeepseshan.blogspot.in/2009/02/weblogic-server-10-deployment-error.html

  The configuration documentation.
  "On the computer on which you will administer the WebLogic Server, you must install all of the Web applications for all applications that you plan to deploy on any machine in the environment. (The Administration WebLogic Server is installed and deployed on computer Services Foundation) »

  You should should not create a new domain for deployment on other servers and can use the existing and only to deploy web applications on the servers that you want running on.

  I don't know what version you install, but if it's 11.1.2.1 then consider the OS is similar on both machines
  "All Web applications in a deployment of EPM system must be deployed on windows computers or on all UNIX machines."

  There do not appear to be there in 11.1.2.2 so I guess it isn't the rule more.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• HEEELP: Re-create the procedure for the Essbase.sec file in 11.1.2.0

  Hello
  What is the procedure for recreating the file Essbase.sec in 11.1.2.0 Essbase environment... In older versions, it has been used to remove Essbase.sec, start the Essbase server and it has been recreated a file void essbase.sec... But in 11.1.2.0 with Shared services... is the procedure? If it is deleted from the file essbase.sec... start Essbase Service recreates and will update SSP Outlook2003?
  
  
  Please someone help...
  
  Thank you...

  Hi Alex,

  Unfortunately, I have about 20 questions to ask in order to really be able to provide useful guidance, but at least I recommend checking out 'The Essbase security file management' section of the Essbase DBAG and eventually the Oracle Hyperion Enterprise Performance Management System Backup and Recovery Guide.

  11.1.2.1 SER60-online http://docs.oracle.com/cd/E17236_01/epm.1112/esb_dbag/frameset.htm?launch.html

  11.2.1.1-online http://docs.oracle.com/cd/E17236_01/epm.1112/epm_backup_recovery_11121/frameset.htm?launch.html BURG

  Thank you

  Todd Rebner