HEEELP: Re-create the procedure for the Essbase.sec file in 11.1.2.0

Similar Questions

• Restore the essbase.sec file to another server

  Hi all
  
  I have restored several databases of our development server to another server.
  But can I just copy file of security on this server?
  
  My concern is that they have a different number of app/db, will be the work of security file?
  If that does not work, how can I recover the security of a given database file?
  
  Thank you in advance for your help!

  Singlejoe,

  You will have problems if you do not correspond to the app/dbs on your target server.

  Assuming that your dev source server has several databases to the target, before copying, create a dummy apps/dbs on the target. Stop Essbase and save your Essbase.sec to be replaced. (Just-in-case copy to keep some security, filters, etc., you might have).

  If you have more / different apps/dbs on your target, I would like to archive them (text backup is complete, copy all relevant artifacts, etc.) and then delete. Then follow the above paragraph. The point is to make the app/db files exactly the same at Essbase.sec.

  Then copy on your Essbase.sec source to your target, remove the apps/dbs dummy and you should be good to go.

  Kind regards

  Cameron Lackpour

• Generate image (for iOS app) in assets could Photoshop create the contents.json file at the same time?

  Generate image (for iOS app) in assets could Photoshop create the contents.json file at the same time?

  Hi iolnation,

  I'm sorry, but currently there is no such feature available in Photoshop.

  However you can surely place the feature request here: Photoshop community customer family

  Concerning

  Jitendra

• Computation of factorial by creating a procedure for her

  Hello everyone
  I tried to create a procedure for the calculation of the factorail of a number
  but something's not right
  I hope that you guys can drive the correct path
  Here is my code

  create or replace procedure factorial(n in number)
  is 
             v number;
  begin
  
         for i in reverse n..1
   loop
                v :=v*i;
  end loop;
  dbms_output.put_line(v);
  end;

  Why reverse?

  
   1   create or replace procedure factorial(n in number)
    2   is
    3              v number :=1;
    4   begin
    5          for i in  1..n
    6    loop
    7                 v :=v * i;
    8   end loop;
    9   dbms_output.put_line(v);
   10*  end;
  SQL> /
  
  Procedure created.
  
  SQL>
  SQL>  begin
    2   factorial(5);
    3   end;
    4  /
  120
  
  PL/SQL procedure successfully completed.
  

• Error message: cannot copy... Failed to create the directory or file.

  I get the Error Message ' cannot copy (a file USB Store n Go): failed to create the directory or file.»  All of a sudden I started getting error message is when I tried to copy to the USB mass storage: "F:" copy on the removable key worked for a proor very long in this message. And there are a lot of empty space.  The diagnosis says that everything works correctly.

  Dear Clarence

  Try first to unplug the mass storage device, then reconnect and format it by Righ click on Format.

  Then try to paste these files on this USB key again.

  If it fails this time then format your USB using HP USB stick formatting to http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=MTX-UNITY-I23839 tool

  Click Download on the page above. Install it and run it. This will guide you through the steps of formatting your USB drive in a few seconds...

  It is also useful for the repair of the almost dead usb keys.

  Concerning

  Zeeshan Ahmad

• Unable to create the new domain file

  Hi experts

  I am trying to create the new domain file, but there is no success.

  Tools-> domain Administration > file-> Select

  When I choose, the dialog box open typed the new name for file field, you click Open.

  the error message is "mydomains.xml is not a domain file.

  Please tell me how to create the new domain file where you will store the areas associated with my project.

  Thank you

  Hello

  With the dialogue of the Administration of the areas, you modify xml with the areas. You cannot create a file or assign the file with the fields in given the design from there.

  Documentation:

  SQL Developer Data Modeler does not include the default domains file.

  To create new field definitions, select Tools > areas of Administration and click Add to create and add your own domains. These areas are added to the default value of the file, defaultdomains.xml, and can be used for all your projects.

  The file is located in /datamodeler/types/defaultdomains.xml

  Basically, you should

  1. create /datamodeler/types/defaultdomains.xml if it does not already exist

  See Tutorial: modeling of data for a small database

  2. create some (open) design and import file fields to file-> import-> areas

  3. after that study is registered again Directory /domains with design level domains file inside the tree of creation will be created.

• How to create the listener.ora file

  Hi all
  
  My emca start dbconsole... successful because I do not have in network/admin listener.ora. My interlocutor only runs on the default config
  
  I can't run gui netca bacause I connect only remotely using PuTTY.
  
  I want to run in silent mode netca to create the listener.ora file... can you give me response.file of the sample for netca?
  
  
  Thank you
  
  Published by: yxes2013 on 3.5.2013 04:14

  I meet emca error before and it is just resolved when I created lisnter.ora, so I want to try it.

  I doubt that listener.ora was the cause.

  Although experience is a better teacher.

  No, trying to find the cause of a problem is a better teacher, just try things at random - it's a good way to teach you things like "emctl start dbconsole does not work without a listener.ora", which is clearly false.

  Once start emca

  The command is not 'emca,' maybe that's your problem.

  We don't know, because you have not copied/pasted something here, including the error message

• Cannot start db > ORA-09925: cannot create the audit trail file

  version 10.1.0.5.0
  AIX 3 5 00C9CEA04C00 dcxnim01
  
  When I'm trying to start db, getting this message any idea?
  
  SQL > connect virtue sysdba;
  ERROR:
  ORA-09925: cannot create the audit trail file
  IBM AIX RISC System/6000 error: 89: invalid file system control data detected
  Additional information: 9925
  ORA-09925: cannot create the audit trail file
  IBM AIX RISC System/6000 error: 89: invalid file system control data detected
  Additional information: 9925
  
  
  Here's the tail of the log of alerts
  
  3 Private_strands to the log command
  Thread 1 Advanced for you connect to sequence 3923
  Currently journal # 1, seq # 3923 mem # 0: /db01/oradata/ldapdcx1/ldapdcx1/redo01.log
  Fri 6 Aug 16:48:34 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_j001_991348.trc file:
  [ORA-07445: exception encountered: core dump [] [] [] [] []]
  Fri 6 Aug 16:48:35 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_mmnl_508106.trc file:
  [ORA-07445: exception encountered: core dump [] [] [] [] []]
  Fri 6 Aug 16:48:38 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_ckpt_839714.trc file:
  [ORA-07445: exception encountered: core dump [] [] [] [] []]
  ORA-27072: IO file error
  IBM AIX RISC System/6000 error: 5: i/o error
  Additional information: 9
  Additional information: 3
  Fri 6 Aug 16:48:38 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_lgwr_905470.trc file:
  [ORA-07445: exception encountered: core dump [] [] [] [] []]
  ORA-27063: number of bytes read or written is incorrect
  IBM AIX RISC System/6000 error: 5: i/o error
  Additional information:-1
  Additional information: 1024
  Fri 6 Aug 16:49:07 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_pmon_848078.trc file:
  ORA-00470: LGWR process ended with the error

  IBM AIX RISC System/6000 error: 5: i/o error
  Additional information:-1

  Problem of the OS.
  What is the problem at the level of the BONE with the disc?

  unpacking of tail - 100

• KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  Hi dakota25,

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• Problem steps Recorder error - you have not permissions to system files needed to create the specified output file.

  I am trying to use the PSR as a domain user, but get the following error message when you try to save my record:

  "You don't have permissions of system files needed to create the specified output file.
  If I run the present when logged in as a domain administrator, I can record without problem.  But when logged in as a domain user, I get the error.  I tried "Run as Administrator" as well as "Run as different user", enter the domain administrator credentials, but still get the error.
  Everyone knows about this problem?

  Hello Giblits,

  Because the computer is connected to a domain, it would be better on the TechNet forum. I suggest you post your question on the following link to get the exact resolution.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• precise MAXLOGINS setting in the essbase.cfg file

  Hello Experts,
  
  What is the fine tuning of the MAXLOGINS in the essbase.cfg file if users are around 100-150 logging.
  
  Thanks in advance.
  
  Kind regards
  Sudhir
  
  Published by: 637223 on December 16, 2009 10:33

  MAXLOGINS

  Sets a limit on the number of user sessions that can be connected to the Essbase server at any time.
  Syntax

  N MAXLOGINS
  n any integer between 1000 and 1048575 is valid. The default value is 10000.

  Ok?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Change in the merger of insert and create a procedure for updating the records after

  Hello
  
  I have a table that contains about 50 M lines of partition, and every day I have an application that performs a merge to insert records statement about 100 k per day and it's 300 M updates a day.
  
  Because I both update and insert the application performs a merge.
  I need to make at least 500 M, updated day by day, and for this reason this solution doesn't have enough performance for what I'm asking.
  
  I think another solution that I will try to implement now, and I just posted this in an attempt to get help on the option that I may have to do.
  
  I want to start putting in place:
  -Locations is updated 'last_record_date' using 'KEY1' and 'Key2' "KEY3";
  -Change the application to only inserts into a temporary table.
  -Have two procedures, one that takes the new records from the temporary table and inserts it into the final table, and another that selects records which is updated and perform an update.
  -This two procedures will choose the records and delete them from the temporary table (or mark them as updated\inserted).
  
  The volume is very large, so performance is a challenge! That's why I'm writing this, because a solution with enough performance for the intermediate stage will be difficult.
  My final table is partitioned by date and the date is the area that I need to update (instead of create daily partitions in order to reduce the frequency of the movement of the line, I create monthly partitions)!
  It is currently my table definition:

  CREATE TABLE MY_TEST_TABLE
      (KEY1                           VARCHAR2(50 BYTE) ,
      KEY2                         VARCHAR2(50 BYTE) NOT NULL,
      KEY3                           VARCHAR2(50 BYTE) ,
      last_record_date                    VARCHAR2(50 BYTE) NOT NULL)
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
     STORAGE   (
      BUFFER_POOL DEFAULT
    )
    NOCACHE
    MONITORING
    ENABLE ROW MOVEMENT
    PARTITION BY RANGE (last_record_date)
    (
    PARTITION MY_TEST_TABLE_201112 VALUES LESS THAN ('20120101')
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
    NOLOGGING,
    PARTITION MY_TEST_TABLE_201201 VALUES LESS THAN ('20120201')
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
    NOLOGGING,
    PARTITION MY_TEST_TABLE_201202 VALUES LESS THAN ('20120301')
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
    NOLOGGING,
    PARTITION def VALUES LESS THAN (MAXVALUE)
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
    NOLOGGING
    )
    NOPARALLEL
  /
  
  
  
  -- Constraints for MY_TEST_TABLE
  
  ALTER TABLE MY_TEST_TABLE
  ADD CHECK ("KEY1" IS NOT NULL)
  /
  
  ALTER TABLE MY_TEST_TABLE
  ADD CHECK ("KEY2" IS NOT NULL)
  /
  
  ALTER TABLE MY_TEST_TABLE
  ADD CHECK ("KEY3" IS NOT NULL)
  /
  ALTER TABLE MY_TEST_TABLE
  ADD CONSTRAINT pk_MY_TEST_TABLE PRIMARY KEY (KEY1, KEY2, KEY3)
  USING INDEX
    PCTFREE     10
    INITRANS    2
    MAXTRANS    255
  /

  Thank you
  Ricardo Tomas

  naoseionome wrote:
  Hello

  My version is:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production

  It's the DOF I used to create the database.

  The merger is common during every day for about 10 M records.

  There are several methods to do the update, but they do sequencially to avoid deadlocks (because I can't control the source and each process can update the same keys.

  The update uses "KEY1, KEY2, KEY3" to update the value 'LAST_RECORD_DATE' have impact by being date or varchar2?

  I'm still waiting to receive permissions in order to follow up the matter, but in the meantime, in that I am trying to implement this work around in order to accelerate a development in the case where it would be necessary! Comments only I have at the moment, it is that he is not able to process the total amount of records timely (order book is generated).

  Thank you
  Ricardo

  Well, the first thing we do is to change the type of data type varchar to a date. The main impact is that a date is not a string, it's a date. If you are adding data processes in different date formats (which is possible when you use a character to store information) you're going to be very sad (good luck converting back an effective date).

  An example of how this can happen easily.

  ME_TUBBZ?select to_char(sysdate) from dual;
  
  TO_CHAR(SYSDATE)
  -----------------------------
  12-jan-2012 10 55:33
  
  1 row selected.
  
  Elapsed: 00:00:00.01
  ME_TUBBZ?alter session set nls_date_format = 'yyyy-mon-dd';
  
  Session altered.
  
  Elapsed: 00:00:00.01
  ME_TUBBZ?select to_char(sysdate) from dual;
  
  TO_CHAR(SYSDATE)
  --------------------
  2012-jan-12
  
  1 row selected.
  
  Elapsed: 00:00:00.00
  

  Assuming that the client passes the column as an Oracle DATE will make an (implicit) conversion to store the data as a string, which will be based on the current settings of the NLS for the session. This allows also for someone to completely non-jour the information in the column (super bad). It's just really bad form to use strings to store dates, numbers, anything that is not naturally a string.

  Based on the description of your problem, I can't imagine how your partitioning scheme performs one action in another that require more work in order to process the updates (which are most of your needs). Partitioning does not equate to increase performance. It is a tool that, like every tool has its place, but I do not think that this is justified for what you do (certainly not how you currently use it anyway).

  I say no partitioning can not be useful for you, but I don't think that on the column that you are currently using is 'good '.

  Something I would like to personally study (must be able to compare this approach to your course, if you need parameters for comparison) if I were you would be using a Table Index organized for it. It will take more time to perform the operations insertion, but that is a small part of all the work that you do for this process. For updates, it should eliminate a lot of IO, assuming that you are doing an INDEX seek followed by a table access by ROWID to perform updates. This recommendation assumes that everything you said is true. You have 4 columns in your table, of which 3 are components of the primary key and the 4th is a date (note I did not string :)) and that you refresh mainly, not fit.) Also that you have no 'secondary' on this entity index (and none are needed).

  I would investigate this approach before the solution of temporary table that you are currently studying.

  See you soon,.

• How to delete a field in the essbase rules file?

  It is a fundamental issue, I create a rule to load the metadata for essbase, when I create the rules file, it displays 20 default fields and I just need to 14 fields, so I want to 'remove' some fields, but I don't know how to do, should I use 'combine' or 'reject records "?
  
  Nightstands, if I want to add a field in the rules file, should I use 'split' field? or "create filed with the help of text"?
  
  Edited by: user2571802 may 6, 2010 11:40

  Just to add I know you use ODI and you can be implemented a rule of charging for it, if you manually enter the details of the column without loading a file or using SQL when you design it, it does not matter on the extra at the end of the column names columns as they will be ignored.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• LV 2016: LabVIEW could not create the required channel file permission error endpoint; NOR-488: Error of hardware detected DMA

  I just installed the new 2016 LabVIEW with the two patches and wanted to check the new feature.

  When you create a channel writer, there was a pop up select the Channel end point, but whatever the option chosen, there is a window saying "LabVIEW could not create the required channel endpoint", error ccode: 8 file authorization error

  NOR-488: Error detected DMA hardware.

  I have error permition from file to file, file that is?

  By chance, do you have re-defined the default data directory in LabVIEW?  LabVIEW uses to host files for the warp threads, and if you moved from its default position in your profile (C:\Users\\Documents\LabVIEW data), especially if you moved it to the root of C:, it could become unalterable.  This must remain in your profile!

  Bob Schor

• Error 0 x 80070052 as it is impossible to create the directory or file

  I am copy photos in the photo gallery of a folder/tag for a scan of the disc.  I have a file of some 140 photos which does not copy.  Others have copies with no problems.   I created a folder with all the photos I want to copy.  When they begin the process, all go but those of this group in particular.  I get the above error message.  Please tell me what I would do, I succumbed to the last 1.5 hours to resolve myself.  Happy new year!!

  Kelly

  My next try to discover what was going on would be to check the location of the files. A folder root drive can contain as many files, (depending on the file system used, such as Fat32 or NTFS). I wouldn't count the number of files successfully in the root and see if you're on that, based on the constraints of the file system. When you click right a drive and properties, it shows the file in use for this drive system.

  Errors creating files or folders in the root directory:

  Messages rating helps other users

  Mark L. Ferguson MS - MVP