Service SQL Server 2014 will not start start after the update sp1 (KB3058865, KB3075950, KB3094221)

Hi, my SQL Server 2014 works very well in my server with WIndows 2012 until I installed the new day & service pack that was required for server hardening.

I successfully installed SP1 KB 3058865 first, then discovered that the services do not start. After so much research to fix, I came with the 2 cu updates KB3075950, KB3094221 in knowing that it could solve my problem but unfortunately is not.

I also tried to change the service account that many suggest, but his does not work.

I tried to replace the master file & maslog but also failed.

I tried to run etc and unique usermode and restore master db... also failed.

Here is the log file:

16/02/01 15:21:21.83 Server Microsoft SQL Server 2014 (SP1 - CU3) (KB3094221) - 12.0.4427.24 (X 64)
October 10, 2015 17:18:26
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.2 (build 9200 :) (hypervisor)

2016-02-01 15:21:21.84 setting the server UTC: 08:00
2016-02-01 15:21:21.84 Server (c) Microsoft Corporation.
2016-02-01 15:21:21.84 server all rights reserved.
2016-02-01 15:21:21.84 server process ID is 5128.
2016-02-01 15:21:21.86 Server system manufacturer: "Microsoft Corporation", model of system: 'Virtual Machine '.
2016-02-01 15:21:21.86 the server's authentication mode is MIXED.
2016-02-01 15:21:21.86 Server record SQL Server messages in file ' C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2016-02-01 15:21:21.86 Server service account is "NT Service\MSSQLSERVER". This is an informational message; no user action is required.
2016-02-01 15:21:21.86 registry server startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\DATA\master.mdf
e C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\Log\ERRORLOG
l C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2016-02-01 15:21:21.86 Server startup command line parameters:
s 'MSSQLSERVER '.
2016-02-01 15:21:22.27 Server SQL Server has detected 1 struggling with 1 cores per socket and 1 logical processors per socket, 1 total logical processors; using 1 logical processors based on SQL Server licenses. This is an informational message; no user action is required.
2016-02-01 15:21:22.27 Server SQL Server starts at the normal base priority (= 7). It is an informational message only. No user action is required.
2016-02-01 15:21:22.28 Server has detected 7999 MB of RAM. This is an informational message; no user action is required.
2016-02-01 15:21:22.28 Server using conventional memory in the memory manager.
2016-02-01 15:21:22.33 default server collation: SQL_Latin1_General_CP1_CI_AS (us_english 1033)
2016-02-01 15:21:22.37 Server this instance of SQL Server is a latest report by using a process ID of 1600 at 01/02/2016 15:13:12 (local) 01/02/2016 07:13:12 (UTC). This is an informational message only; no user action is required.
2016-02-01 15:21:22.38 the maximum number of connections administrator dedicated to this server instance is '1 '.
2016-02-01 15:21:22.38 configuration of server node: node 0: CPU mask: 0 x 0000000000000001:0 Active CPU mask: 0 x 0000000000000001:0. This message provides a description of the NUMA configuration for this computer. It is an informational message only. No user action is required.
2016-02-01 15:21:22.40 allocation of dynamic locking using the server.  Initial allocation of blocks of lock of 2500 and 5000 per node lock owner.  It is an informational message only.  No user action is required.
2016-02-01 15:21:22.43 spid8s start database 'master '.
2016-02-01 15:21:22.49 Server CLR version loaded v4.0.30319.
2016-02-01 15:21:22.51 spid8s d - 8 operations in the database 'master' (1:0). It is an informational message only. No user action is required.
2016-02-01 15:21:22.61 Server common language features (CLR) runtime initialized using CLR version C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ v4.0.30319.
2016-02-01 15:21:22.62 spid8s 0 operations cancelled in database 'master' (1:0). It is an informational message only. No user action is required.
2016-02-01 15:21:22.62 spid8s Recovery is writing a checkpoint in database 'master ' (1). It is an informational message only. No user action is required.
2016-02-01 15:21:22.79 spid8s SQL Server Audit begins audits. This is an informational message. No user action is required.
2016-02-01 15:21:22.80 spid8s SQL Server Audit has begun audits. This is an informational message. No user action is required.
2016-02-01 15:21:22.88 spid8s Trace SQL ID 1 was launched by the "sa" login
2016-02-01 15:21:23.28 spid8s server name is "UATCASADB". It is an informational message only. No user action is required.
2016-02-01 15:21:23.28 spid13s A self-generated certificate was loaded successfully for encryption.
2016-02-01 15:21:23.33 spid13s Server listens on ['none' 1433].
2016-02-01 15:21:23.40 spid13s Server listens on ['none' 1433].
local connections provider 2016-02-01 15:21:23.44 spid13s server is ready to accept connection on [\\.\pipe\SQLLocal\MSSQLSERVER].
local connections provider 2016-02-01 15:21:23.44 spid13s server is ready to accept connection on [\\.\pipe\sql\query].
2016-02-01 15:21:23.48 Server Server listens on [: 1 1434].
2016-02-01 15:21:23.49 Server Server listening on [127.0.0.1 1434 ].
2016-02-01 15:21:23.49 connection admin support dedicated server was created for locally listening on port 1434.
2016-02-01 15:21:23.49 Server SQL Server attempts to save an of Service Principal name (SPN, service principal name) for the SQL Server service. Kerberos authentication is not possible, until a name for the SQL Server service is SPN. This is an informational message. No user action is required.
2016-02-01 15:21:23.60 spid14s A new instance of the full-text filter daemon host process has been started successfully.
2016-02-01 15:21:23.71 Server SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [MSSQLSvc/UATCASADB.onenetworkbank.com.ph] for the SQL Server service.
2016-02-01 15:21:23.72 Server SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [MSSQLSvc/UATCASADB.onenetworkbank.com.ph:1433] for the SQL Server service.
2016-02-01 15:21:23.97 spid17s start database 'msdb '.
2016-02-01 15:21:23.98 spid18s database startup "ReportServer".
2016-02-01 15:21:23.98 spid19s database startup 'ReportServerTempDB '.
2016-02-01 15:21:24.03 spid9s start database 'mssqlsystemresource '.
2016-02-01 15:21:24.08 spid9s the base resource database build version is 12.00.4427. It is an informational message only. No user action is required.
Error logon 2016-02-01 15:21:24.11: 18401, severity: 14, State: 1.
2016-02-01 15:21:24.11 of logon login failed for user "NT SERVICE\ReportServer". Reason: The server is in script upgrade mode. Only one administrator can connect at this time. [CLIENT: ]
2016-02-01 15:21:24.18 spid19s 1 transactions rolled forward in the 'ReportServerTempDB' (6:0) database. It is an informational message only. No user action is required.
2016-02-01 15:21:24.28 spid19s 0 transactions cancelled in the database 'ReportServerTempDB' (6:0). It is an informational message only. No user action is required.
2016-02-01 15:21:24.44 spid17s 133 transactions rolled forward in the database 'msdb' (4:0). It is an informational message only. No user action is required.
2016-02-01 15:21:24.73 spid17s 0 transactions cancelled in the database 'msdb' (4:0). It is an informational message only. No user action is required.
2016-02-01 15:21:24.74 spid17s Recovery is writing a checkpoint in database 'msdb' (4). It is an informational message only. No user action is required.
2016-02-01 15:21:24.79 spid9s start database 'model '.
2016-02-01 15:21:25.01 spid9s clearing tempdb database.
2016-02-01 15:21:25.94 spid9s start database 'tempdb '.
2016-02-01 15:21:26.12 spid20s The Service Broker endpoint is in a disabled or stopped state.
2016-02-01 15:21:26.12 spid20s The Database Mirroring endpoint is disabled or stopped state.
Manager of Service Broker 2016-02-01 15:21:26.15 spid20s began.
2016-02-01 15:21:27.32 spid8s database 'master' is upgrading script 'msdb110_upgrade.sql' of level 201328592 level 201331019.
2016-02-01 15:21:27.32 spid8s-
2016-02-01 15:21:27.32 spid8s start PRE_MSDB execution. SQL
2016-02-01 15:21:27.32 spid8s-
2016-02-01 15:21:28.36 spid8s configuration database COMPATIBILITY_LEVEL option for 100 for database 'msdb '.
2016-02-01 15:21:28.56 spid8s-
2016-02-01 15:21:28.56 spid8s start PRE_SQLAGENT100 execution. SQL
2016-02-01 15:21:28.56 spid8s-
2016-02-01 15:21:28.60 spid8s configuration database option COMPATIBILITY_LEVEL of 120 for the database 'msdb '.
2016-02-01 15:21:28.77 spid8s Configuration option 'allow updates' goes from 1 to 1. Run the RECONFIGURE statement to install.
2016-02-01 15:21:28.77 spid8s Configuration option 'allow updates' goes from 1 to 1. Run the RECONFIGURE statement to install.
Error logon 2016-02-01 15:21:29.18: 18401, severity: 14, State: 1.
2016-02-01 15:21:29.18 of logon login failed for user "NT SERVICE\ReportServer". Reason: The server is in script upgrade mode. Only one administrator can connect at this time. [CLIENT: ]
2016-02-01 15:21:31.84 spid8s attempting to load library 'xpstar.dll' in memory. It is an informational message only. No user action is required.
"2016-02-01 by using spid8s 15:21:31.86"xpstar.dll' version ' 2014.120.4100 ' to run the extended stored procedure 'xp_instance_regread '. This is an informational message only; no user action is required.
2016-02-01 15:21:31.89 spid8s DBCC TRACEOFF 1717, process server ID (SPID) 8. This is an informational message only; no user action is required.
2016-02-01 15:21:31.89 spid8s DBCC execution completed. If DBCC printed in error messages, contact your system administrator.
2016-02-01 15:21:31.90 spid8s
2016-02-01 15:21:31.90 spid8s create table temp_sysjobschedules
2016-02-01 15:21:32.20 spid8s
2016-02-01 15:21:32.20 spid8s Alter table sysdownloadlist...
2016-02-01 15:21:32.22 spid8s
2016-02-01 15:21:32.22 spid8s Alter table sysjobhistory...
2016-02-01 15:21:32.24 spid8s
2016-02-01 15:21:32.24 spid8s Alter table systargetservers...
2016-02-01 15:21:32.25 spid8s
2016-02-01 15:21:32.25 spid8s Alter table sysjobsteps...
2016-02-01 15:21:32.40 spid8s Configuration option 'allow updates' goes from 1 to 0. Run the RECONFIGURE statement to install.
2016-02-01 15:21:32.40 spid8s Configuration option 'allow updates' goes from 1 to 0. Run the RECONFIGURE statement to install.
2016-02-01 15:21:32.42 spid8s
2016-02-01 15:21:32.42 spid8s-
2016-02-01 15:21:32.42 spid8s PRE_SQLAGENT100 execution. Full SQL
2016-02-01 15:21:32.42 spid8s-
2016-02-01 15:21:32.46 spid8s DMF pre-shaping within walking distance...
2016-02-01 15:21:32.83 spid8s DC pre-shaping within walking distance...
2016-02-01 15:21:32.83 spid8s check if Data collector config table exists...
2016-02-01 15:21:32.84 spid8s State of collector of data before the update: 0
2016-02-01 15:21:32.84 spid8s pre_dc100::Check if syscollector_collection_sets_internal table exists...
2016-02-01 15:21:32.84 spid8s pre_dc100::Capturing Collection to define the status of temporary table...
2016-02-01 15:21:33.05 spid8s Deleting cached generated automatically collect T - SQL packages to msdb data...
2016-02-01 15:21:33.05 spid8s end of the DC pre-staged to level as follows.
2016-02-01 15:21:33.05 spid8s DAC pre-shaping within walking distance...
2016-02-01 15:21:33.06 spid8s from CAD pre-shaping within walking distance...
2016-02-01 15:21:33.06 spid8s end of the CAD pre-staged to level as follows.
2016-02-01 15:21:33.06 spid8s-
2016-02-01 15:21:33.06 spid8s start execution of MSDB. SQL
2016-02-01 15:21:33.06 spid8s-
2016-02-01 15:21:33.19 spid8s Configuration option 'allow updates' from 0 to 1. Run the RECONFIGURE statement to install.
2016-02-01 15:21:33.19 spid8s Configuration option 'allow updates' from 0 to 1. Run the RECONFIGURE statement to install.
2016-02-01 15:21:33.37 spid8s check the size of the MSDB.
2016-02-01 15:21:33.63 spid8s error: 8966, severity: 16, State: 2.
2016-02-01 15:21:33.63 spid8s can not read and lock the page (1:56616) with lock type SH. page no ID invalid. has failed.
2016-02-01 15:21:33.63 spid8s error: 8946, severity: 16, State: 12.
2016-02-01 15:21:33.63 spid8s Table error: Allocation page (1:56616) has invalid header values to the PFS_PAGE page. The type is 0. Check the type, unit ID of ID and the ID of the page on the page.
2016-02-01 15:21:33.63 spid8s error: 912, severity: 21, State: 2.
2016-02-01 15:21:33.63 spid8s Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' has detected 3601, an error state 5, severity 25. It is a serious condition that could interfere with the normal operation and the database is taken offline. If the error occurred during the upgrade of the 'master' database, it will prevent the entirety of a SQL Server instance to start. Review the previous entries in the error log, take appropriate corrective action and restart the database so that the script upgrade steps run until the end.
2016-02-01 15:21:33.64 spid8s error: 3417, severity: 21, State: 3.
2016-02-01 15:21:33.64 spid8s cannot recover the master database. SQL Server cannot run. Master of restoring a full backup, repair or rebuild. For more information on how to rebuild the master database, see the SQL Server online documentation.
2016-02-01 15:21:33.64 spid8s stop SQL Server launched
2016-02-01 15:21:33.64 spid8s trace SQL stopped due to server shutdown. Trace ID = "1". This is an informational message only; no user action is required.
2016-02-01 15:21:34.70 spid8s error: 25725, severity: 16, State: 1.
2016-02-01 15:21:34.70 spid8s an error occurred trying to empty sessions extended all running events.  Some events may be lost.
2016-02-01 15:21:34.71 spid13s the SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [MSSQLSvc/servername.urldomain] for the SQL Server service. Error: 0x2af9, State: 61. Administrator should deregister this SPN manually to avoid client authentication errors.
2016-02-01 15:21:34.71 spid13s the SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [MSSQLSvc / servername.urldomain:1433] for the SQL Server service. Error: 0x2af9, State: 61. Administrator should deregister this SPN manually to avoid client authentication errors.

-----------------------------------------------------------------------------------------------

I would be grateful for all the help I can get. Thank you.

Hello

Your question is beyond the scope of this community.

Please repost your question in the SQL Server TechNet Forums.

https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

TechNet Server forums.

http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

See you soon.

Tags: Windows

Similar Questions

  • Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

    Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
    Tried running firefox.exe Pei but error message:

    XML parsing error: the undefined entity
    Location: chrome://mozapps/content/profile/profileSelection.xul
    Line 18, column 1:
    "< dialog < =" "^ =" "p =" "> < / dialogue >

    Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

    Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

  • Windows Vista will not start after the automatic installation of the patch Ms.

    My Dell laptop does an automatic installation of the latest MS patches (12/08/10) and now he can't boot into windows.  All tests show that the material is fine, but an error at the end of the "bad update patch" said test results I can not even to go back to a previous restore point.  This happened to me the year last on my desk... same thing, but it's XP which could not start after an automatic update for the Member States.  Dell technical support told me that MS knows what is happening, but it is not supposed to be public knowledge.  I need to know if there is a fix, in addition to erase everything and do a complete reinstallation of the operating system.

    Follow these steps to try to solve your problems of boot.

     

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • Photoshop CS6 will not start since the update of Windows (Windows 7)

    This is the second time. Last week, after the update of Windows, Photoshop has started, but no window pops up. I reinstalled Photoshop. Today the same problem. After Windows Update reboot, Photoshop crashes in process Explorer and no window opens.

    Any idea which screws I have to drill?

    Thank you

    Roger

    Second reboot helped. Photoshop is run again.

  • Mail does not start after the update of EL Capitan 10.11.2

    Many applications do not work (do not start) after my Mac Book Pro with El Capitan 10.11.2 update:

    -Mail

    -Time Machine

    -App Sore

    How can I fix this?

    -First data backup. Since you said TM does not work you will need to use another method

    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?

    -Start to recovery and repair the startup disk

    OS X: on OS X Recovery - Apple Support

    -If it is repairable, reinstall the OSX. Nothing shall be lost.

    How to reinstall OS X on your Mac - Apple Support

  • does not start after the update of Norton

    This morning, I started my HP Pavilion a6600f, and it started normally, running in Vista.  Then, I received a notice of Norton that I needed an update, something that happens regularly.  He downloaded the updates, and then asked that I restart the computer.  I also notied it says a previous update was also pending.  After restarting, it came to initial blue screen hp and nothing more.  No key worked and the hard drive has not been consulted.  Pressing the button, the computer stop immediately, not the usual five second delay.

    Obviously something happened during this update has been processed.   Any help is appreciated.  Because the computer will not start even in safe mode, I know not how to do almost anything.

    OK, I missed the part of Vista but you also said "the keyboard was not working" and that's why I commented on the keyboard.

    Also, you said "I had then a notice of Norton that I needed an update, something that happens regularly.  He downloaded updates, and then asked that I restart the computer ", there was no mention on an update of Windows.

    If this is the case, download and create the recovery of Norton as tool suggested.

  • Windows does not start after the update...

    Hope someone can help with this,

    I just installed the update sp1 for my computer for Windows Vista Premium Home dir all installed with no problems, but when I restarted my pc, Windows wouldn't start. The only thing that is on display is a black screen with Windows Error Recovery on top, then he said "Windows does not start. A recent hardware or software change might be the cause. I tried to restart it in different ways, but nothing. Then he said: I have to insert my OS drive to try to fix, but that's not even start. Everyone knows about this problem? This has happened right after that I installed the update...

    L.Butler,
    Are you able to boot from your Vista DVD or recovery partion and run the Startup Repair tool?  If you do not have a Vista disc so make sure that your computer is configured to boot from the CD drive before booting from the hard drive.  Once you start with support for Vista select the "Repair your computer" option and first run "Startup Repair".  If that is not correct the problem then boot with Vista support and select the option "System Restore" and choose a date prior to the update install.
    Once you are able to boot normally again, then I suggest that you are looking for virus\malware.  SP1 was released in April 2008.  So if you install earlier means there may be other problems on your system.  If you have a backup of your current personal data then I recommend to do a clean restore to install\factory.  Then immediately install antivirus software, and then do all Windows updates before installing other software. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • BlackBerry Z10 my BB Z10 does not start after the update today at 91 firmware

    Hello

    IM from the India. I bought a Z10 only today in the evening. When I arrived home and connected to the laptop, it has proposed an update to my version 261 91. But after that, my BB10 is not start. Just the red light keeps blinking on the black screen. When I tried to reload the software link, it says, the software is uptodate and turns again into flashes red. Please suggest me how to solve this problem as its been just 2 hours, I used the phone and he's dead to me.

    Remove the battery for 5 minutes and pop again. In this post, there are two links depending on what type of screen appears once it tries to start, after the red light.

    http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/security-wipe/TD-p/2201767

  • Windows will not start since the update :( Help, please

    Windows could not start. a recent hardware or software change might be the problem

    file\windows\system32\config\system
    status: 0xc00000e9

    When I try to start the system restart that nothing happens

    When I try to restore the computer to factory settings it says that the necessary files are not there.

    My computer was working fine until I installed an automatic update from microsoft. Help, please

    For any problem with the recovery of software/process to factory settings, you will need to contact the manufacturer of your computer.
    This isn't their recovery process, Microsoft.

    Windows Update Forum:

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • DST-short failed: Windows 8 will not start after windows update.

    Hi, hope you can help.

    Laptop does not start (just goes to blank screen, not same logo).

    Start-up then F11 I get F11... Lower-left system recovery

    Finally, it goes in the HP logo and prepare the AutoFix and then clears the screen after awhile and then crashes.

    Commissioning market then F10, I get ESC... Start to break down on the left

    Finally, I get into test extended to the system and get:

    Processor control spent

    Verification of Smart Drive hard past

    Short hard drive DST check Failed

    Failure ID: 0u7r6c-6hq7gq-mfpx1a-60tv03

    Product ID: c6m50ea #abu

    Is there a quick glance upward for these error codes?

    I've seen similar errors, but different failure of id, most say replace the HARD drive.

    I reinstalled and reconnected the hard drive, does not.

    Powered off, removed the power cord and battery and drained (hold down the power button for 30 seconds) and reboot to anything will do.

    I have now no functionality on this pc. If I have to replace (1 TB) HARD drive, should I get HP, a set of recovery/usb disks (Web url?)?

    Any help/advice welcome

    Cheers, Rob

    Hello

    Yes, you must get a new one.
    If you have not already, you may have to order it from HP.

    http://support.HP.com/us-en/document/bph07143

    Contact HP:
    http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

    Concerning

    Visruth

  • Computer will not start after the installation of Kaspersky, will not even go into safe mode

    I tried to install Kaspersky on my laptop this morning to roll some viruses on my computer. After you restart during the installation, I got the blue screen of death with a STOP 0x000000F4 error code. I can't use my phone at all now, and it will not work in SafeMode either. I tried to restore the computer to before that Kaspersky was installed but it cannot do so. I tried to restore to the last known good configuration, but that did not work. I have no idea what to do now. My laptop is basically useless now and I am very angry.

    If I have the Kaspersky disk in I kind of access Kaspersky, and it keeps telling me it is obsolete and must be updated, but it will not be updated. Also, it tries to mount the drives or something and gets stuck trying to create the swap file. I don't know if it's important, but I'll post it anyway.
    I'm at a loss to know what to do...

    If you have tried to install an AV program after your PC has been infected you left it too late.

    Your safest option is to use your recovery discs to get destructive if you plant (make sure that the external devices are disconnected during this process)

    I hope that you, the data has been saved you will lose everything on the PC

    Once recovered allow windows update to do its thing for Important updates ONLY. It may take several reboots.

    If any update fails cure this problem before doing anything else.

    Once the update finished visit of manufacturers of laptop for important driver updates to update necessary.

    Only after this has been done, you should start installing software or external devices.

    If an installation fails, solve this problem before

  • Satellite Pro L300 will not start after the Bios Update

    Help please.

    I simply formatted laptop Satellite Pro L300.
    I used all the drivers updated Toshiba and everything is fine.

    I then updated the bios with the latest version.
    After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.

    The ides welcome

    Hey Buddy,

    What start menu, you mean?

    I put t understand how it is possible until you wrote that your laptop does not start?

  • iPad mini 3 will not start after the os 9.2 update

    I just updated my ipad mini 3 iOS 9.3, after the download and installation now it does not start. just show a white screen with black apple logo.

    Press the sleep/wake and home buttons and keep them for at least 10 seconds.

    If this is not enough, take a look at these articles Support from Apple:

    If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

    Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

    More info here:https://support.apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • Satellite L300 - will not start after the installation of Skype

    My Toshiba Satellite L300 won't start after installing Skype.
    This happened to someone else, and can I do?

    Thank you.

    I think Skype is probably the most used messenger and ideal application for communication.
    It is professionally designed and programmed. As you know in recent years, it has been offered in many different versions and it is always better and better.

    So I think that Skype itself is probably not the problem. I know that a lot of people also use Skype and I've never heard problem described.

    Anyway, what you can try is to remove Skype and try to install it again. Try also push the BONES at that earlier time. Maybe some Microsoft updates are responsible for the stability of the software.
    It's really not easy to say what the problem is here.

  • iMac does not start after the update of the Sierra...

    Don't know what to do. Sierra, just updated and now my system hangs during startup and turns off.

    Anyone else seen this? No idea what I can do?

    Try a safe boot. Otherwise, you might to reinstall macOS.

    ----------

    Stop your Mac. Use the power button if you wish. Now start with the SHIFT key is pressed. This will start in Safe Mode, with all extensions turned off. Safe mode is slow to start, so give it time, it checks a lot of tasks. If it works fine in Safe Mode, restart normally. If it works now, you are finished.

    If the problem comes back after a reboot, you may have an extension conflict. Disable all extensions via system preferences. To isolate which extension is at fault, turn on an extension at the same time, restart in the meantime, until you find bad.

Maybe you are looking for