WebVPN/RADIUS - assign to the Group - Concentrator3005

Similar Questions

• Associated with the process task assignment to the Group

  Hello
  
  I have a RO: for example. Laptop
  
  Process definition for this task and the process of definition, I added a process task create user...
  
  and I'm asigning this task to a group.
  
  But this approval request goes to xelsysadm instead of Member of the group.
  
  Why is it so?

  I think you are confused between the approval process and procurement process.

  You must assign the task to the group necessary for the approval process.
  Once your application for approval is xelsysadm I guess you have the standard approval process.
  Entrust State standard to your group and the approval will go to your group.

  Hope this helps,
  Sagar

• Assign the radius server to specific groups of VPN 3000

  Last week, I assigned a test Cisco ACS server to be used for authentication and device of accounting for a specific group on a Cisco VPN concentrator 3060. When I looked at ACS, it appears that not only the Group was to go there but others through this way and using the default values on the Cisco Secure ACS. Is it possible that I can make sure only the traffic assigned to this specific group of VPN using the ACS server defined?

  Thank you

  Hello

  Not sure about your implementation. But you must configure the group for this specific ad group map can only authentication.

  In the external group map db, map

  Group ACS VPN---> with<---- ad="" vpn="">

  Any other combination should point to any access group.

  Kind regards

  ~ JG

  Note the useful messages

• How can I change the group that is assigned to a contact?

  I synchronize contacts on my 2 iPhones, 2 iPads, MacBook Pro and iMac. I would like to change some of my current designations of the group for some of my contacts. How can I change the group that is assigned to a contact?

  Mark,

  First of all, make sure that you deal with iCloud contacts.

  With the help of your MacBook Pro or iMac Contacts open and remove unwanted contacts outside the group. You will be asked "do you want to remove the card for 'XXX' or delete Group 'YYY'.» Choose "remove group.»

  Then go to "All Contacts" and drag the name of the new group.

  If you want to see what the contact belongs to groups, click on the contact and press 'option '. All groups with this name will be highlighted.

  

• Difference between built in Admin users and assigned to the Administrators group.

  I'm trying to use a printer on Remote Desktop Services OPOS driver.  My computer is Windows 7 and Server 2008 R2 64-bit.

  If I remote as the built in Admin, driver utility works correctly.  IF I log in as a user assigned to the Admin group I have error claim OPOS.

  I tried to copy the user information in the case where the user data has been corrupted.

  Can you please explain, shed some light on how and why w/Admin user rights do not work on the opos utility.

  The hidden administrator account does not have the UAC filtered token as other accounts admin "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• AAA RADIUS authentication for the only user group

  Hello

  I use ACS3.1 and tries to use authentication radius for all network switches in my company.

  Meet the im problem now is how to restrict only a user group to access the connection/exec switches? It seems that all user IDS in my acs able to telnet (user access) to the switch (using their login credentials).

  I would like to limit still from telnet by using their ID except administrator group.

  Counsel on how this is possible.

  TKS!

  The GBA, you need admin users in their own ACS group separated, leaving other users in their own group also.

  Change the group that contains the users you don't want to give access to and under the heading of restricted access network (OAN), in "Group defined Network Access Restrictions", check the "Define based on IP access restrictions", choose "Rejected the call point" and enter switches in the table below (put a * in the port and address).

  This prevents standard users authentication to switches. You can add all your switches in a group of network devices (NDG) to this, then you have to add that, in the section NAR rather than adding each switch individually.

• the WebVPN asa8.0 portal (4): Group-url

  Hi all

  I have a problem when I try to use the group-list control to directly select the group for a ssl vpn without the drop-down list.

  Activate the command group-url https://a.a.a.a:port / test in the Tunnel-group, but even if I put it in my browser I still

  See the drop-down list.

  This happens with an ASA8.0 (4).

  I have an ASA8.2 (1) and I did not have this problem.

  I noticed this difference in the login page url after redirection:

  8.0 (4) https://a.a.a.a:port / + CSCOE + / logon.html? token = 4D6912AB72A1FCFA2643F325

  8.2 (1) https://a.a.a.a:port / + CSCOE + / logon.html? tg = test & token = 4D6912AB72A1FCFA2643F325

  Can we do any auggestion?

  Thank you in advance!

  There are a few bugs related to the group-URL in 8.0.4.  In your test above, what port you set the ASA to listen on the WebVPN connections?  If something other than port 443, you can be executed in bug CSCsu77167.

• Assignment of the task to its users and groups

  Hi Experts,

  We have a requirement for the assignment of the task to its users and groups. What are the different options we have to achieve this goal.

  (1) considers that I have 6 groups, 6 groups, I need to take a group and itinerary of the task to a dynamic group.

  Each group contains also 15 users when a task is routed to the Group A then all users in Group A should get the job. How can I achieve this. Can u send me please step by step procedure.

  We use Jdev 11.1.1.6

  (2) I have confusion about the roles of Parametic what exactly it is? And what is the difference between parametric and Management Chain.

  Thanks in advance.

  Pavan

  Dan, thank you so much for the post and the explanation...

  But today, I just mention its only 6 groups... but if the groups continues to increase as groups of 100 or more so how can we achieve...

  Kind regards

  Pavan

• Assignment of students to group learning and the creation of the Group of the learner.

  Hi all
  
  Are there standard ways to create groups of R12.1.3. I tried looking for the standard API Oracle but do not have to find them. Is there another way of backend, we can create a group of learners. I know to create from request, but we need to loose several groups of learners. I wanted to back-end.
  
  We will also need to assign the number of learners in the Group of the learner. Can you please explain the possible ways to make these assignments.
  
  All entries are the most expected.
  
  Thank you
  Abhishek.

  Hi Abhishek,

  You can use "Compulsory registration" If you're working with an online offer. It will automatically register all learners in a learning group.

  Best regards Anders Northeved

• How to assign groups to the Group Session variable in the initializtion box

  Hi all
  
  I have a requirement that I use a separate table for the table separately for the information of the user and group information.
  so in this same user belongs to multiple groups, so how do I assign these groups to single user
  I use external authentication of table...
  
  so everything will be done at the level of the session if, my problem is that I'm not able to assign multiple groups to single user,
  How to create the GROUP Session variable in the box initialization
  (here I'm horizontal initialization option)
  
  Please help me
  
  Thank you
  Françoise

  Thanks for the fence wire...

  Assign points if you feel that my post is correct and useful for your problem

• 'Group membership' does not get assigned to the user

  Hello
  
  Currently, we are implementing the authentication of the external table through single sign-on (SSO) as part of our security.
  In our portal, we have columns username, groupname and businessunit.
  
  As part of the implementation, I created the initialization of authentication block so that it stores the user name in the USER session variable.
  
  Select the username from usertable where upper (username) = upper(':USER');
  
  Then, I created a block of initialization of authorization in order to set the groupname. For this I used
  
  Select "group", groupname from usertable where upper (username) = upper(':USER');
  
  Now, when a user opens a session in SSO mode the user is redirected to the dashboard and initialization authentication block seems to work very well the USER session variable displays the corresponding username. Now when the user clicks on 'My account' and see his membership in a group, may not see his name of group that has been defined in the groupname column in the userstable. My scenario is similar to
  
  username GroupName businessunit
  
  x users with power Marketing
  Users are financial Mega
  
  
  
  For example, when the user opens a session x, it should be able to see its membership in the power users group. In this case I could assign privileges to these groups through the administration screen and my security.
  
  Can you get it someone please let me know where I am going wrong?
  
  Thank you

  Hello

  Try the debugging session.
  When you log on to the dashboard checks if the value stored in the GROUP session variable. If there is no value, I think that the user permissions are overridden. Normally users defined in the repository are priority to those coming from authentication to the external table. Make sure that the user you logged in with is not part of the repository (DPR) and comes via authentication external table.

  Let me know if you have any other questions.

  Thank you

• Assign users to the Group

  Hi Experts,

  I have a scenario where a user has already echosign account and I'm looking to add him to the group, which manages the signatures. I have connected through admin account but I don't see any possibility to add. How to add the user because the only option I see is to create the user and the system is neither to create this user already once the user exists.

  

  Thank you

  Uday

  Hi Uday,

  You click the option on the far right under users and clicked on see all users? If the user still does not appear, then it is definitely not under your account. In the meantime, I answered your internal message as well.

  Kind regards

  -Usman

• I upgraded to firefox 3.6 beta 3 for firefox 12 and now, none of the sites Spruz I own or am administrator on just shows the Member of the groups of pictures are huge

  I upgraded to firefox 3.6 beta 3 for firefox 12 and now, no sites Spruz I own or am admin on watch just the Member groups, photos and videos are huge...

  My site about Spruz shows members of the groups, photos and great videos... Instead of members photos taking place a 1 1/2 X 4 space (3 rows) in the upper left corner of my site, they are falling is greater than the length of the first page in single file... Groups and videos take place amid all the first page...

  As I have something that is compatible with the site that I admit needs to be corrected... It appears that way on all Spruz sites I belong to...

  I can get the photos to display in 3 columns, if I do this:

  Orange Firefox button or classic menu Tools > Options > content

  In the section fonts and colors, click on the Advanced... button.

  Change Minimum font size None and OK out of Options.

  But most people won't do that. I prefer a minimum of at least 10 font size.

  Then... How to fix it. How the thumbnails are size, is that they 10em with a font size of basis of 5px. If the minimum size is set to 10px, double images in height and width.

  It would be more logical if the base in your style sheet font size was larger. Can change you it? If so, try to double the font size and to halve the size of the relative picture:

  In http://languagesofourancestors.spruz.com/dhtml/corestyle/xstyle.css

  
  /*All Cards Small*/
  .SUI-UserPic.small, .SUI-ImageCard.small, .SUI-VideoCard.small { font-size: 10px;}
  

  
  /* User Pics */
  (4 lines down)
  .SUI-UserPic .SUI-CardImage { display: block; width: 5em; height: 5em; overflow: hidden; border: 1px solid #aaa; border-radius: 2px; -moz-border-radius: 2px; -webkit-border-radius: 2px;}
  .SUI-UserPic .SUI-CardImage img { width: 5em; min-height: 5em; border: 0 none;}
  .SUI-UserPic .PopInfo {line-height: normal; display: none; width: 140px; position: absolute; z-index: 2; top: 4em; left: 0; margin: 0 auto;}
  

  I think that will be more widely compatible. There may be some details that I missed, but hope this helps.

  I don't know why the minimum font size has not been applied as well in Firefox 3.6, but I suspect that this is the new normal.

• I can not connect to my computer laptop get "the Group Policy client service has no connection. Access denied. "

  I can not connect on my lapto even if the password is correct. I'm getting "the political group Clinet impossible service connection access Denined.

  Original title: I can not connect on my laptop even if the password is correct

  HI, John Angelo2,.

  Try rebooting and tapping F10 to achieve the recovery screen

  You can choose to repair or restore your system

  Select Restore to an earlier time

  If it is impossible to do the above, use the installation start screen repair DVD

  This problem is caused by your user profile/registry settings/system files corruption

  Response of Mouneshawar R.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/the-Group-Policy-client-service-failed-the-logon/6b069a74-8524-442c-8ff1-d723e2a4e992

  Re-create the profile or restore the file ntuser.dat from the back to the top

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/c88515b4-4be7-4f6f-9988-80f8a5683b41/

  You can post on the Technet forum for help

  How to customize the default local user profile when you prepare an image of Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/973289

  Assign a mandatory user profile

  http://TechNet.Microsoft.com/en-us/library/cc786301 (WS.10) .aspx

  http://support.Microsoft.com/kb/307800

  http://msdn.Microsoft.com/en-us/library/bb776895 (v = vs. 85) .aspx

• Error at startup 'Windows could not connect to the Group Policy Client service. "

  http://NS8.upanh.com/B5.S35.D4/b4eeb57376a9063490ccb13a5c59e84d_51157438.error.PNG

  It's the ball that appeared recently on my desktop whenever I log in Windows 7 Ultimate x 64. Someone knows how to fix this? Please help me as soon as possible :(

  http://NS8.upanh.com/B5.S35.D4/b4eeb57376a9063490ccb13a5c59e84d_51157438.error.PNG

  It's the ball that appeared recently on my desktop whenever I log in Windows 7 Ultimate x 64. Someone knows how to fix this? Please help me as soon as possible :(

  I FOUND THE SOLUTION TO THIS PROBLEM!

  The crash of your computer during updates Windows caused which!

  I had this problem on my laptop since November, and it really annoyed me.  I sifted through the event log and found the model of events leading up to the issue and, probably, he did.

  In short, the model is as follows: Windows updates automatically run as planned, and when restarting is launched after the updates are complete, the computer crashes (probably during the reboot sequence).  When starting, it signals that the last stop was not planned, and the question starts to happen.

  I spent 2 days trying to dig a solution by Internet, without success, until I came across this page.  It says nothing about this particular problem, but it gives more information on the SVCHOST process that launches many services, including Group Policy Client.  It seems that when restarting vital registry settings have been lost during the accident and Group Policy Client 'do not know' how to start.  Let me explain:

  There are two places to look in the registry:

  1. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services this path must contain gpsvc key (a record), which is responsible for the configuration and service settings.  I found the key was intact, so you do not touch anything here - just check that the key exists.
  2. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows svchost It's the most important way you should look at in, because it should contain keys and values under the #1 key.  Here are descriptions of what must be present there.
  • There must be called GPSvcGroupmulti-string value. My laptop was missing it.  Thus, you must create the multi-string value called GPSvcGroup and assign it the value GPSvc.
  • Then, you must create a key (a folder) and name it GPSvcGroup - this key should normally be there, but, again, that it was missin on my laptop.
  • Open the newly created GPSvcGroup folder, then create 2 DWORD values:
  1. First called AuthenticationCapabilities and you must give it a value of 0 x 00003020 (or in decimal form 12320)
  2. Second, called CoInitializeSecurityParam , and it must have the value 1.

  When you have finished all the above steps, restart the computer, and the problem will be solved.

  Step by step video for those who are not very technical procedure is here: http://youtu.be/4m5KEmckWK4

  I'm so relieved that I could remedy and hope this will help others with the same question.