Services and controller App has stopped working and will be closed
Anyone know what are the 'Services and controller App' and what he does?
Seen a few old discriptions problem but no solutions.
Get the error: "Services and controller App has stopped working and closed."
Then the computer restarts. Think that it happens on my home network. Great idea
but I would like to know difficulty! Apparently, one of the members of the network (three
computers, printers and router) tries to access the laptop where the problem occurs.
Hi Forney,
· When you get this message?
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Follow these steps:
Step 1: Start the computer in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.
Method 2: Scan the file system (CFS) auditor to repair corrupted files.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3: Run the disk check to check for possible errors.
Check your hard drive for errors
http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.
Tags: Windows
Similar Questions
-
I get two error codes... "Services and controller app has stopped working" and "Windows has encountered a critical problem and will restart in a min. Please save your work." The only time where it does it but when I plug my cable network. Already ran sfc and found nothing. Ran malwarebytes and removed a lot of viruses, I picked up, but I think that something in my registry can be screwed up after trying to remove the said virus. I was getting some kind of error MRT.exe and I tired looking for things to the top on this but I think I can have messed up a registry that was loaded entry of this and it has damaged something.
Someone at - it answers that do not involve me having to reformat and install a new OS. I bought the computer off of a friend and it's a custom-made computer, so I don't have Vista Disc... while hoping a good solution.
Help me please! :)
Thank you
BishopIn addition to using an anti-virus, as Malware/spyware scan:
http://www.Malwarebytes.org/MBAM.php
Malwarebytes is as its name suggests, a Malware Remover!
Download the free Version from the link above.
Download, install, upgrade and scan once a fortnight...
How to use Malwarebytes once it is installed and updated:
1. open Malwarebytes > click the update tab at the top > get the latest updates.
2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer
3 MBAM will now start to scan your computer for malware. This process can take some time.
4. when the scan is complete, a message box will appear
5. you must click on the OK button to close the message box and continue the process of Malwareremoval.
6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .
7. a screen showing all of the malware displayed the program that is
8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.
9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.
10. you can now exit the MBAM program.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you do not have a DVD of Microsoft Vista, borrow one from a friend.
Read this tutorial on how to do a repair installation:
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
Regarding the relocation:
You can borrow a suitable Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the
See you soon.
Mick Murphy - Microsoft partner
-
He ran.
After finishing, the program finds corrupted files, but could not fix them.
Enter windows/logs/CBS, I found that access was denied... so I couldn't read.
Maybe, try to get in the log from a high CMD prompt.
-
Original title: Adobe flash player
I get a message 'Adobe Flash Player Update Service 11.6 r602 has stopped working & has been closed'. How can I fix the update service so it will update?
Hello
This can help you:
Download and run the Flash Player uninstaller program.
http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html
Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:
http://get.Adobe.com/flashplayer/?promoid=BUIGP
If the problem persists, you may want to ask in the Forums of community Flash Player:
http://forums.Adobe.com/community/flashplayer
See you soon.
-
Hotkey App has stopped working
At the start, he said that Hotkey App has stopped working!
Hello
1. What is the brand and model of the computer?
2 have you made changes to your computer recently?
3. What is the exact error message you received?
Method 1:
I also suggest you perform the clean boot and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
I also suggest you to run the System File Checker.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
-
Original title: Message from Microsoft Windows
I downloaded WildTangent Games 2 years and never had a problem with my games and download new games. But for the
beyond a few days, I can't play games or download new games. I can still play games I downloaded a year ago. When I try,
a box appears from Microsoft Windows and says "WildTangent Games App has stopped working. A problem caused the program blocking
works correctly. Windows will close the program and notify you if a solution is available. »
But Microsoft has never sent a solution and I don't know how to deal with this situation. My name is Ramona Casse
Thank you very much
removed the phone number for privacy *.
Hello
1. you remember to make changes to your computer before the problem?
I suggest that you follow these steps and check if the problem persists.
Step 1:
Temporarily disable all security software and check if the problem persists.
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Step 2:
Test the issue in a clean boot State, and check if the problem persists.
Note: Follow step 7 to your computer as usual.
Step 3:
If the problem occurred recently, I do System Restore to the point that your computer was working normally.
-
I tried to download a 'Virtual Villagers' Limewire program (what was I thinking?) and then I had all these virus that messed up my computer big time.
I have the error messages are:
Host process for Windows Services has stopped working as was closed.
The system could not find the environment option that was entered.
When I try to install the updates:
"WindowsUpdate_800700CB" "WindowsUpdate_dt000"
The change I made before all this was trying to install Limewire "Virtual Villagers" program.
I tried to go through the files and remove the sources of the Trojans, I ran several scans Malware Bytes (each indent to 4 Trojan horses, Rpot Kits, Ad/Spyware every time) and recently tried the Windows scanner. Who found 2 Trojan horses and withdrawn. Subsequently, I made a Malware Bytes scan which found 1 Trojan and I removed it.
I'm not able to create, delete or modify anything in the UAC. Uninstall the habit of most of the things I try to uninstall programs and features. I'm more able to control the volume on my computer with the arrow keys and Fn. My Gallery of photos will not preview more and my computer will not install updates. My computer turns off without warning a lot and takes awhile where I can turn it back on and I hope not to have it close back 20 minutes. I try to use the system restore, but it won't work. I don't have a Windows Vista disc.
How I have difficulty to all this and permanently delete all viruses and malware?
Hello
I suggest you try the following steps:
Step 1: Try to create another user profile, and then test to see if the problem persists
If you do not have a different user account, you will need to create a (see link below). If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.
Create-a-user account
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
Step 2: You can follow the steps provided by Vincenzo Di Russo MVP to get rid of malware on your computer, please click onhere.
You can see the steps mentioned in the link below
Windows Update error 80070422, 80244019, or 8DDD0018
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070422-80244019-or-8DDD0018Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Weather app has stopped working after the recent update of store
Recent update of the store windows caused the app to stop working. It shows the current weather, but when you try to access the application that need you right back to the start page. I also noted the presence even when app stich (Evernote) also recently installed II, he returns to the start screen and does not open.
Hello
We appreciate that you gave us an opportunity to answer the question that applications do not work after you have installed the Windows Update.
Please follow the steps and check if that helps.
Method 1: Run App troubleshooting utility.
Download and run the troubleshooter modern UI App and check.
http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab
Method 2: I suggest you try the steps from the following link:
What to do if you have problems with a softhttp://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
Method 3: check the Date & time zone.
Follow these steps to change the time.
a. double-click the current time on the lower right of your screen.
b. then click time change date, and then click change time zone.
c. Select your time zone and check automatically adjust the clock for the time, then press OK.
d. press on apply, then OK.Method 4: check if you have the same attention to clean boot.
Please see the link to place the computer in a clean boot.
http://support.Microsoft.com/kb/929135
Please note: after troubleshooting, be sure to start your computer in normal mode by following step 3.
I hope this helps. Please get back to us if you have any other questions. We are here to help you.
-
I installed quicken 2009 connected as owner on Vista Home Premium Notebook Sony. When I try to run Quicken I get a message of immediate windows Windows "Quicken launcher has stopped working" will try to resolve the problem then
Hello Richard Popp,.
I'm not an expert on Quicken so I do not know what help I will be.
You could look at this post on the Quicken Forum and see if this information helps you.
https://qlc.Intuit.com/post/show_post_full_view/cppSsgKbWr3PYHacfArQA81 Quicken uninstall using the Windows Control Panel
2. run qcleanui.exe and clean all versions.
3. restart your PC
4 Quicken resettlement to a new distinct and NOT in the Program Files folder in the folder where your Quicken data resides and install as administrator (if on Vista).
5 update Quicken at the last updated R6.
See if that helps. Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
my windows media player has stopped working, no will come on screen. Help, please
Windows media player has stopped working, does not yet go up on the screen. tried to restore my music in the library, still no luck. said media player may be corrupted. Help, please!
Hello
Have you recently installed another player?
Right-click on taskbar - process and see if WMPlayer.exe is already hidden. If the end then on her process.
--------------------------------------------------------
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html---------------------------------------------------------------------------
Have you recently added stores or ANY application from Stardock?
Using 64-bit Vista?
Can you think of recent things you did in WMP which could be the cause? You added another
reader recently or an add-on for WMP?When I try to use Windows Media Player 11, the program does not start, or some UI elements
are empty - a Mr Fixit
http://support.Microsoft.com/kb/925704/en-usMaybe something here
http://msmvps.com/blogs/chrisl/articles/17315.aspx
and here
http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspxCheck here the news of WMP11
http://zachd.com/PSS/PSS.html
----------------------------------------------------------------Do this to reregister the Jscript.dll and Vbscript.dll files.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
type or copy and paste-> regsvr32 jscript.dll
Press entertype or copy and paste-> regsvr32 vbscript.dll
Press enterRestart and if all goes well, it will run now.
--------------------------------------------------------------
Have you recently installed another player?
Reset your associations:
How to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
How to associate a file Type of Extension to a program under Vista
http://www.Vistax64.com/tutorials/69758-default-programs.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
That spooler SubSubsystem App has stopped working and was closed does mean?
Spooler SubSystem App stopped working and was closed means. I can't get my printer to print at all. Not even a test page.
Hello
Check with the printer manufacturer for updated drivers and support for known issues.
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
The value of all Services back to their default values.
Start - type into the search box-> Services find top - make a right click on - RUN
AS AN ADMINISTRATORBlackViper - for Vista SP1 - Services - all return to their default values.
http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020BlackViper - for Vista SP2 - Services - all return to their default values.
http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991How difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Bing desktop app has stopped working and was closed
Whenever I start my computer, I get the message boot up 'Bing Applicatoin Office ceased to operate and was closed. I still see as a Bing backgroung page updated, but bing entry window disappears and is closed.
I don't know what to do to solve this problem, but to uninstall this app buggy and a replacement product.
Any ideas?This only adds to the other Microsoft issues of my I. E. Explorer 9 constantly generating a message "XXXy (website) has stopped responding relatives or retrieve web page.
Hi Alex,
Thanks for the reply.
Please uninstall and reinstall IE9.
How to install or uninstall Internet Explorer 9?
http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9
Post back with the result.
-
Printer works fine print anything else, but fails when printing in Internet Explore. It even blocks IE, forcing them to restart. before you print, I go to Services and check that print spooleris running, as well as the RPC and DCOM etc...
System:
Compaq Presario SR5350F running
Windows Vista Home Premium (32 bit)
Service Pack 1
Error:
Log name: Application
Source: Application error
Date: 01/03/2011 12:18:52 AM
Event ID: 1000
Task category: (100)
Level: error
Keywords: Classic
User: n/a
Computer: DAD-PC
Description:
Failing application spoolsv.exe, version 6.0.6001.18511, time stamp 0x4c6a8f6f, failed module ntdll.dll, version 6.0.6001.18000, time stamp 0x4791a7a6, exception 0xc0000374, offset error 0x000b015d, process 0xbbc id code, start the application time 0x01cbab03d6c1a6cf.
The event XML:
1000 2 100 0 x 80000000000000 58980 Application DAD-PC Spoolsv.exe
6.0.6001.18511
4c6a8f6f
ntdll.dll
6.0.6001.18000
4791a7a6
C0000374
000b015d
BBC
01cbab03d6c1a6cf
Hi Danmor72,
1. you remember to make changes to the computer before this problem?
Step 1:
You can check out the following link and try the steps by check and chan Friday, April 13, 2007 12:37 AM if it helps:
Step 2:
If the problem persists after you follow the steps above, and then run the Microsoft Fixit to solve the problem.
Check out the link:
http://support.Microsoft.com/GP/printing_problems
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
SPOOLER APP HAS STOPPED WORKING
MICROSOFT SPOOLER SUBSYSTEM APP STOPPED WORKING - WHICH MEANS: MY PRINTER DOES NOT PRINT
I DID PASS ON THE RECOMMENDED IN THE MSG OF ERROR FIX, AND IT INDICATES THAT THE SPOOLER IS RUNNING.
Hello
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right. -
My DropBox app has stopped working.
My selection suddenly, the App works mid operation logo appears on the screen, stays there for a minute or so shut before entering
mode of operation. He has been vworking with great success before locking.
Maureen Woolley
Original title: my selection App suddenly stopped, operation of workplace
Hi mopsiemopsie,
(1) is this problem specific to the drop box?
(2) you get an error message?
(3) have you made changes on the computer?Method 1-
I recommend you to run clean boot.
Put your boot system to identify if third-party applications or startup items are causing the problem. You must follow the steps in the article-How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: you must follow step 7 of article to return the computer to Normal startup after you perform the troubleshooting steps.
Method 2-
You must perform a System Restore to undo the changes made on your computer.
View items-
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settingsNote: perform a System Restore will cancel all changes made previously on your computer. You may also lose unsaved information as well. Proceed at your own risk.
If the problem persists, then I wish you contact Drop Box for help.
Check out the link-
Hope this helps!
Maybe you are looking for
-
Re: Font book. I chose "restore standard fonts" by mistake. How to get back on my selection. The Cancel button is grayed out so I can't cancel it. Any suggestions? Thanks in advance!
-
Firefox doesn't do not display window full
Firefox only shows not the window full any site Web Im on. Tried to adjust the zoom (zoom in, zoom out, and)reset the zoom) none of them works. Internet Explorer works fine.
-
After that update Thunderbird was installed yesterday, the works of default account, the second account does not work. flash error message dropped something on the server an ora network problem. Don't stay long enough to copy. Has worked with FAI for
-
Low value RAM on my Libretto U100
Hello. I have a Libretto U100. He is supposed to have 512 MB of RAM. But when I check it through "My Computer" it says that there are 496 MB. Can someone explain why this is? Thank you.
-
iPhone got 6s rattling sound when shaken!
Hello Apple! I just bought the apple from the Apple Store iphone6s not more than a week. Until today, I noticed that when I shook my iPhone, I heard noise came close to the camera or the apple logo. I do not know! The noise sounded like something ins