Session ends not with StructClear function

Similar Questions

• Is there a Session end function in Cold Fusion?

  In .net, there is a session end function that allows you to perform functions end a user session, Cold Fusion has something like that? The reason I ask is that I have a user that generates several xml with the data files and stores them on the hard drive while they are visiting the site, but once they leave, I submit all of these xml in a database files and trying to figure out the best way to do it. It would be for multiple users on the site. Anyone have any ideas?

  Thanks, I guess I can do it. I never did a planned before work, but it does not seem too difficult to install. Thank you.

• Error - c000021a {fatal system error} the Windows logon system process ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000), not able to start the computer.

  Original title: computer will not open a session.

  c000021a {fatal system error} the windows logon process prosses systewm ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000).

  Hi macduf123,

  You did it all change hardware or software on your machine before this problem?

  The STOP 0xC000021A error occurs when Winlogon.exe or Csrss.exe.

  You can follow this link and check if you are able to start correctly on the desktop.

  How to solve an error "STOP 0xC000021A.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• STOP: c000021a {fatal system error} the initial session process or system ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c). The system has been shut down

  I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.

  I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.
  What about Otto
  Windows vista Home basic

  Hello

  Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  =========

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  
  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
  repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
  discs of the machine system good cheap that you already own windows (you will need to reinstall
  If necessary). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP Touch Smart calendar and Notes cease to function and give me a notification so I end the program but it gives me immediately the notification even happening?

  HP Touch Smart calendar and Notes cease to function and give me a notification so I end the program but it gives me immediately the notification even happening?

  the notification said that the problem caused blocking the program works correctly.
  Windows will close the program and notify you if a solution is
  available.
  [Exit]
  I closed the program and this notification will appear back again.

  Hello

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  I would be grateful if you could answer the following questions:

  1. Since when are you facing the issue?

  2. you have any anti-virus installed on the computer program?

  3 are you aware of any changes made to the computer before the show?

  I would say you runa full scan using the Microsoft Safety Scanner and look for any infections.

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  If the problem persists, you can start the computer in safe mode and perform a clean boot. Clean boot helps eliminate any conflict of third party software.

  Note: when you are finished troubleshooting, follow step 3, mentioned in the article to start the computer to a normal startup.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Sir, iam not at all satisfied with the functionality of windows vista, I need immediate upgrading to windows 7, please please give me this, I have the version of the license of vista,.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Programs you are Sir, iam, not at all satisfied with the functionality of windows vista, I need immediate upgrading to windows 7, please please give me this, I have the version of the license for vista, problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Plans of work in PS CC can be also for print design? If not, is it possible to use photoshop with similar functionality?

  Plans of work in PS CC can be also for print design? If not, is it possible to use photoshop with similar functionality?

  As they don't understand the area of cropping and Bleedbox parameters so far that they are, in my opinion, useless in regards to printing.

  If you try to make prepress and correct page layout work in Photoshop, you can change to use the right tools for the task as Indesign.

• last buy and pay creative photography plan cloud. When I open lightroom I get a warning message indicating that Lightroom will open with reduced functionality, you get a subscription to continue using lightroom. But I already bought! I do not k

  last buy and pay creative photography plan cloud. When I open lightroom I get a warning message indicating that Lightroom will open with reduced functionality, you get a subscription to continue using lightroom. But I already bought! I don't know what to do! In his time, that was my trial, which appears as outdated... Can someone help me? Thank you!

  Please see:

  FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  It would be a good idea to also check your system against the minimum requirements:

  FAQ: What are the system requirements for the desktop creative cloud application and every creative application of Cloud?

• Screensaver not working only not with the hot corner

  I used to have my screensaver set to start with the upper left corner of my screen using the feature 'hot corner '.

  However, lately, he doesn't. I tested it with all the other corners, and it does not work.

  I tried other functions with the hot corners and they all work very well. This is just the screensaver that does not work.

  I can set the timer and lights up the screen saver, but not with the hot corner.

  Someone can help me with this, or have any suggestions?

  See you soon!

  Hello Kaijuman,

  Thank you for using communities of Apple Support.

  I understand that when you try to start the screen saver by using Active corners it is not. I would like you to test this behavior then starts in safe mode, and then try another user account on your Mac.

  Start in safe mode

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any key during startup

  How to test with another user account

  You can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  Create a test user account

  1. In the Apple menu, choose System Preferences.
  2. Click the users and groups in the System Preferences window.
  3. Click the lock icon and enter an administrator name and password.
  4. Click on the button Add (+) below the list of users.
  5. Choose a type of user in the new pop-up menu.
  6. Give the user a name and first name, account name, and password.
  7. Click OK.
  8. Close the System Preferences window.

  Connect to the test user account

  Log out of your current user account by choosing logout in the Apple menu, and then open a session the new account that you created. If you are prompted to login with your iCloud or Apple ID account when you log in, skip this step.

  Try to reproduce the problem

  Please let us know what the outcome is so we can help you.

  See you soon.

• ALTER session nls_date_format not retained

  Hello guys,.

  Here is the environment:

  Oracle 11.2.0.1 on Linux 64-bit RHEL DB

  Oracle 11 g 2 on Windows 2008 R2 32-bit client

  Our product works service (code generated in c ++) and the service opens 5 sessions of database and alter session set nls_date_format questions to HH24:MI:SS DD/MM/YYYY in each of them.

  But searching through the service logs, I see that select statements (to_char (date)) return date in format other than what has been defined via "alter session" i.e. they do not see the part and just JJ-LUN-AA. But the same select instructions out the date in the format of correct/expected (according to alter session statement).

  The problem is that we do an insert in a table taking the current system time and running to_date (< time system >). It is a failure with: ORA-01843: not one month valid. I understand that it must specify a format for the input string, the date system, but we do not and was not a problem for someone else.

  I'm also no disconnected sessions or reconnects.

  Customer Oracle NLS_LANG is: AMERICAN_AMERICA. UTF8.

  This problem occurs for one of our customers who use this product. All other clients do not encounter this problem, as this has been a long-standing code. I'm not saying that the code is perfect and looking at some of the SQLs, we rely on implicit conversion of data in Oracle instead of editing the SQL code, but this has never caused a problem to any other customer.

  I understand the hierarchy of setting NLS_DATE_FORMAT i.e. the database, register of operating system of the customer, the customer Oracle (alter session) and finally to_date/to_char functions.

  It seems that the session format game becomes overloaded as when they restart the service in our product everything is back to normal until a couple of days, when queries in the service connects begin to show the date incorrect without time portion and just JJ-LUN-AA.

  Any help would be appreciated as I had read a lot on the internet with no evidence outside this site including our customer:

  ttp://StackOverflow.com/questions/15396241/CX-Oracle-ora-01843-not-a-valid-month-with-Unicode-parameter h

  Thank you

  Bharath

  Bharath3 wrote:

  ...

  My question is, why the session loses the settings of NLS_DATE when it doesn't happen to anyone else? I think that the format is getting replaced in the sessions but how do I know that? How to find environmental changes to current public meetings?

  Maybe you have a connection pool if every session is used by different... hmm applications or threads. Even if you issue a command of nls alter at the start of the session, some processes could change this setting later. This is why it is best to not depend on any parameter of session happened when the connection was established.

  Best solution: just use the correct format inside the to_Char conversion. Or issue a command to alter session immediately before running the selection.

• I have a problem with the function of brush in Photoshop CC

  In recent weeks, I noticed decreases performance in Photoshop CC when you use the brush on the layer masks and adjustment.  It takes an extremely long time for changes to take place.  Please forgive my lack of terminology appropriate in trying to describe my problem, but, for example, I just used my brush on a layer mask.  After you move the brush on the parties of the photo I want to change, a circle of rotation appears as adjustment.  This last time, after having a past more than half of a picture, at 70% opacity, it took more than 4 minutes for the course ends.  All other functions in Photoshop, including all my plug-ins, seem to function normally.  My computer seems to work fine in all other respects, both in Photoshop when using any other program or software.  The problem seems to be limited exclusively to the brush functions in Photoshop.  I noticed it first on a 4 weeks ago, and it gets progressively worse.  I have an Asus gaming laptop computer with processor Quad Core i7, 24G of RAM.  I'm not super computer, savvy, then keep as simple as possible answers would be much appreciated!  Anyone have any ideas or have experienced this same problem?

  Thanks in advance for your answers.

  Trent

  Hi Trent,

  Greetings.

  • Do you use a Wacom?
  • Make sure that your PS is up-to-date.
  • Preferences open PS - - Performance - uncheck the box use a graphics card and then restart PS and see if this is the case for you.
  • Also try to reset tools

  

  • Try resetting the PS preferences
    • To restore preferences quickly by using a keyboard shortcut: press and hold Alt + Ctrl + Shift (Windows) or Option + command + shift (Mac OS) when you start Photoshop. You are prompted to delete the current settings. New preferences files are created the next time you start Photoshop.

  Let us know if this helps

  Concerning

  Rohit

• "The session is not authenticated." all in createContainerView

  Hello

  I use gSOAP (http://www.cs.fsu.edu/~engelen/soap.html) to create stubs of the vim.wsdl file provided by vmware sdk C++. Using these heels, I wrote a simple client application that starts with extract service content (using the retrieveServiceContent method) and then connects to the vcenter Server (using the connection method that takes the ManagedObjectReference of sessionManager returned by retrieveServiceContent(), username and password).

  But after that when I call the createContainerView method to create a view of the VirtualMachines, it returns the SOAP_FAULT:

  SOAP 1.1 fault: "': ServerFaultCode [no sub]
  "The session is not authenticated.
  
  
  What is the way to authenticate a session? Kindly guide me on this.

  I spent a lot of time on this a few years ago, but I didn't spend much time on this topic recently... I've maybe rusty.  If I recall, however, the session not authenticated (assuming that your configuration is correct) is usually a failure to include the WITH_COOKIES macro in the build process.

  Keep in mind, all compilation gSOAP products as well as your executable program must include WITH_COOKIES.

  You will need - DWITH_OPENSSL-DWITH_COOKIES.  I used to include - DWITH_GZIP, but I have never tested the GZIP support (should be automatic for compression).

  I ended up creating Makefiles to generate static and dynamic libraries especially with long compile times that you get with the huge vSphere SDK WSDL.

• Getting RDP not with view 4 PCoIP

  I installed the 4 Agent seen in a XP SP3, fully updated windows update, VM with VDM_VC_MANAGED_Agent = 0 specified since I'm not (yet) using vCenter View 4 with PCoIP selected server installation option. Login v4 Server also provide a W2K3 x 86 VM and created an individual office with this XP VM with PCoIP set as the default protocol. All virtual machines hosted on ESX 4u1.

  When I connect, as a non-domain administrator user, I get a MOP, not PCoIP, connection, such as confirmed by the connection to the server "Active Sessions" and a qwinsta in the session of the view. It is with the View 4 client (without offline) installed on a Vista SP2 x 86 machine.

  I don't see anything obviously wrong in the newspapers on the client.

  Anyone got any ideas how I can get PCoIP going or it is not unless you use vCenter, although I don't quite see why that would be?

  Post edited by: guyrleech

  Previously, I was connecting via IE8 so I just tried with the customer directly, sure I select PCoIP such as the Protocol, and now is shows the link as "wdcon" when I run qwinsta while when I was getting RDP he says "rdpwd" and said: I'm on the console, not a winstation rdp.

  The connection to the server is also now show me as having a PCoIP connection so that it looks similar to this might be a limitation of the entrance via a browser rather than directly by the customer.

  The planning of Architecture Guide States the following on the view with PCoIP:

  PCoIP has the following limitations:

  • You cannot use the virtual printing with PCoIP functionality.

  • Cards using smart only is not supported if you use PCoIP.

  • Users who have access to their virtual desktops with portal view cannot use PCoIP.

  View = view Web Portal Portal to access virtual desktops.

  http://www.VMware.com/PDF/view40_architecture_planning.PDF

• "The session is not authenticated" when you try to convert it to VMWare Infrastructure Server computer machine

  The image was a Linux P2V conversion... I didn't have my ESXi server on the same network, so I just used the Converter 3.0.3 Startup disk to create my virtual image (RHEL 4), and now I'm trying to use the 4 converter to convert the image from the server to the ESXi server.  When I do a "convert", I select 'VMware Workstation or another VMware virtual machine', browse my virtual machine's .vmx file.  In the next screen, I select "Virtual Machine of VMware Infrastructure" in the menu drop down and put my server, including the password information in the boxes below.  I click Next and that works fine, it connects.  From there on, I leave all the default settings and click Next... immedietely at the top of the window, I get "the session is not authenticated.   I did not find anything about it either with the search function, apologize me if I missed something.  Someone else encountered this?

  This happened to me when the time updated Inbox ESXi causing a shift in the session information on the host computer, which I was trying to convert.

  The fix was to bounce the agent converter on the server you are trying to convert.  For me all right.

• Help with fully functional test program

  I'm using a trial of InDesign.  I have looked at several tutorials and try to imitate them and prompts (or at least some of them) will not work.  I'm going to make changes as the tutorial done... and I can not open many functions, cannot display two pages side by side in spite of the by clicking on the prompt at the end of brewing.  The 'clicks' do not work on some functions.  I can add a rectangle with the tool of rec, which works, but when I try to add the color of the coloured bar scrolling does not work and if I click on one that I can do, nothing happening... no answer.  Trying to get one of the pages down so that they are side by side (2 pages) and no page is picked up to move?  I closed and reopened, restarted... the thing is that the first time I tried, it did let me do these features.  But since I closed it the first time, he just left work fully? I chose the tool select... I've tried everything.  I notice that my scroll bar strives to make a difference (on my mouse) but not the scroll edge, and in many cases, I'm not able to use my mouse to click on an element?

  Any ideas?  Adobe offers any help on a trial?

  Thank you!

  Beth

  It is important we say what ID and your OS version, but I'll take a shot in the water and guess that perhaps you run Windows 7 or Vista. If this is the case, see InDesign tools and panels meet not the clicks of the mouse (Windows 7/Vista)