Set the permission on a stand-alone host failed with the script that I made

Similar Questions

• Download the stand-alone host to vCenter License Server failed because the exception: vim.fault.HostConnectFault.

  Location:

  ESXi 5.5 Update 2 stand-alone host with a licnese Essentials

  vCenter Server 5.5 Update 2

  Whenever I'm going to add this host to vCenter he fails with the error: download the file < HOST IP > license to vCenter Server failed because the exception: vim.fault.HostConnectFault.

  I restarted the server vCenter, tried different credentials and looked through all the articles online that I can find online with the same question and nothing none of them suggested has worked so far.

  Thoughts?  Ideas?

  I'll leave this here in the event that it helps someone else.  I was using an administrator account on the stand-alone host in an attempt to add it via vCenter.  Once I started using the Root account on the host, I could add without problems.

• Don't ' option UPGRADE available after failure ESXi 6.0 on a stand-alone host installation

  Dear all, I have a stand-alone host ESXi 5.0 that I tried to install 6.0 on. Installation failed due to missing NIC card r8168 drivers. in any case, I've created a new ISO using ESXi Customizer utility and ready to do it again once the installation of the new ISO standard. The problem now is that there is no 'upgrade' option available when I try to update, I get only the options 'Install' which will eliminate the existing configs etc completely. In summary: the host is still working fine and no problem with it. The issue is that ESXi 6.0 Installer based no existing ESXi installation on the host computer and suggest an installation instead of an upgrade option, what happened after a few failed attempts to run the upgrade. I found this page on this forum https://communities.vmware.com/thread/445526?start=0 & tstart = 0 that says that the solution is to move the directory to a local.tgz (in altbootbank/state.xxxxx/) more high. I don't have any idea how to do this. Appreciate any help on which program use and what commands to run in order to ensure that the old installation is reviewed by the ESXi 6.0 installation program. Thanks, Abid

  I managed to PASS my from5.0 host existing 6.0. To solve the problem, I had, I started the ESXi, authenticated and then checked the contents of the directories shell both Bootbank that Altbootbank by using the ls command. Altbootbank was empty. Then I copied all the files from /bootbank to /altbootbank using the cp command and then I could see the 'upgrade' again option for which I had posted this question. Installation was simple using the custom profile that I created using ESXI Customizer. Thanks for your help anyway, I'll close this issue now. Best regards, Abid

• Patching stand-alone hosts ESXi 4.1

  I need assistance with patch 4.1 ESXi stand-alone hosts.  Is it possible to stage patches?  They can be downloaded and copied ot the host first?  I have to do it via a WAN connection and want to copy the patches before correction of the host. I need also some of the commands necessary to achieve this.  I'm not very good with the command/syntax of command line.  Any help is greatly apprecieated.

  You can stage patches if you are using vCenter Update Manager.  If you do not use vCenter you could

  (1) copy the patch into a local data store on the host

  (2) run the following cmdlet to PowerCLI - install -VMHostPatch -HostPath vmfs/volumes //.

• How to create a virtual machine on a stand-alone host?

  Hello

  as you know others my son, I created a workflow to create several identical virtual machines on a cluster.

  Since we do not only have clustered hosts, but also some autonomous machines, I need to modify the workflow to be able to create virtual machines on these hosts.

  The main stage of the workflow is obviously one that creates virtual machines.

  It is derived from one of the supplied workflow within the Orchestrator library, but in the end, there is not much difference.

  The original workflow uses this method to create a virtual machine:

  task = vmFolder.createVM_Task( configSpec, vmResourcePool, vmHost );
  

  I've omitted vmHost in my workflow, because I did not want the user to select the host in the Cluster.

  So my execution of the method looks like this:

  task = vmFolder.createVM_Task( configSpec, vmCluster.resourcePool);
  

  Now, I tried to get this method to create a virtual computer on a stand-alone host, but everything I tried, he failed.

  Does anyone have a solution or a trick, what I might try to make this work?

  Thank you very much

  Andreas

  For the root folder, try this:

  var parent = vmHost.parent;
  While (!) () parent instanceof VcDatacenter)) {}
  parent = parent.parent;
  }
  var vmFolder = parent.vmFolder;

• How to set the time that my screen stays on?

  How to set the time that my screen lights up.  I have an iPod Touch 6?

  Settings > general > auto-lock

• Set the scripting language (regardless of the language of the interface)

  I just installed the offline version of Adobe Story, but I am really intrigued by the product. The major problem is that there is no way to set the script language. I have several scripts - in various languages - I'd like to load up on Adobe Story, but it seems that she only accepts English. Before can connect you, there is the possibility to choose the language of the INTERFACE, but not the script. Please note that there is no logical link between the language used for the interface of an application (I always put interfaces of applications in English otherwise it's a mess to present a trouble ticket) and the language of the documents created by this request. I can create several documents in different languages in the same session, for example. Also, I could have more than one language in the same script, especially for dialog boxes. It looks like the one who designed this product don't have much confidence with multilingual platforms... It is very oriented to English

  https://it.Pinterest.com/PIN/create/extension/

  https://it.Pinterest.com/PIN/create/extension/

  Yes. On the creation, scripting language gets automatically set based on the language of the interface.

  Currently, missing a feature to change it later.

• Draw attention to reports on a stand-alone host ESXi 5

  Is it possible to execute all statement (email alerts) on a stand-alone ESXi 5 hosts?

  I have a client with multiple virtual machines running on a single host ESXi 5 and you need to know, especially if the host fails, or possibly if resources are stretched.

  Is there anything that is integrated to respond to reports or is the only option to use vCenter?

  Unfortunately, these features are offered for vCenter. You can search any 3rd party tool which offer these features.

  e.g. veeam monitor

• I have a (AIR-LAP1131AG-A-K9), I can set it up as a stand-alone?

  I have a lightweight access point (AIR-LAP1131AG-A-K9). I would like to use it as a stand-alone gateway (AIR-AP1131AG-A-K9). Is this possible? There are configuration changes that need to happen to make this happen? Do I need to use different operating system?

  Thank you

  Siva

  Plug the AP directly on your PC not the router.

  The best way to proceed is to comfort in the AP and make sure that the

  AP can reach the laptop via a switch or a crossover cable

  fixing directly from the laptop and the AP.

  With your cable from the console, you will be able to see if you pressed on the

  button for 20 seconds.

  By using a TFTP server to revert to a previous version

  Follow these steps to return standalone by LWAPP mode

  Download a version of Cisco IOS using a TFTP server:

  Step 1 in the IP address of the computer on which your TFTP server

  software should be from 10.0.0.2 to 10.0.0.30.

  Step 2 make sure that the PC contains the image point (for example file

  as c1200-k9w7 - tar.122 - 15.JA.tar for series 1200 point access) in the

  The TFTP server folder and the TFTP server is activated. Monitor of the

  TFTP program to see the code for transfer to the AP.

  Step 3 Rename the access point image file in the TFTP server folder

  C1200-k9w7 - tar.default for series 1200 point access,

  C1130-k9w7 - tar.default for a series of 1130 access point, and

  C1240-k9w7 - tar.default for 1240 series access point.

  Step 4 connect the PC AP with a category 5 (CAT5)

  Ethernet cable. This must be a crossover cable if connected

  to the AP. Or ethernet cable is normal if the AP and laptop are connected

  to a switch.

  Step 5 disconnect the power to the access point.

  Step 6 push the MODE button and hold the button while you reconnect power to the access

  point.

  Step 7 press and hold the MODE button until the status light turns red

  (about 20-30 seconds), then release.

  Step 8 wait that access point restarts, as attested by all lights

  Green followed the status light blinks green.

  Step 9 after the access point reboots, reconfigure using the graphical interface or

  the CLI.

  If the image is not download from Server/tftp on your computer, you may need to delete the previous image of tar on the access point of the console:

  Simply hold the mode button until the light is red.

  Then, by using the console port, make sure that the guest is AP: and do a show «»

  "Flash:" on the device and make sure that there is no image that begins

  "c1130-rcvk9w8-tar..." ». If there is an image that starts with who then

  Delete it with "delete flash:

• Creation of stand-alone executable file with similar library files without errors of link

  I have an Executive Test that is run on two different test systems. Each stand has another card ARINC429. The old card use 429dll32.lib, while the most recent map use pci429.lib. Test Exec code only loads a single library file (using LoadExternalModule) depending on what the test bench has the card, but since there are many similar functions in both, ICB does not test Exec be built as a stand-alone executable.

  In CVI 5.0.1 I opens the "Create stand-alone executable file" and select "add files to the executable. I check the 429dll32.lib and the pci429.lib to include in the creation of executable, and then click 'OK '. When I click 'OK' to create the executable I have several link errors, one for each function both .lib files have in common.

  Is it possible for each of these .lib files to be included in the compilation without having to create two separate executables?

  eatmontr:

  If you use LoadExternalModule(), you need not include the .lib files in the Executive test project.  Refer to the CVI for LoadExternalModule help.

  Here's the info on the help:

  LoadExternalModule loads an external object module file. You need not list the file in your project or loaded as a module of an instrument.

  The file may be an object (.obj) file, a library file (.lib) or a library (.lib) import DLL.

  Here are a few articles to OR who can help.

  To access the plug-ins with CVI (with sample program) http://zone.ni.com/devzone/cda/epd/p/id/133

  How do I call dll if I have two functions with the same named in two different dll? http://digital.NI.com/public.nsf/allkb/5299ED8D43F3B5FE852563BF0056EBA6

• How can I set the Script of customization for all virtual machines in a paralytic

  By using the. ExtensionData method found here: http://communities.vmware.com/thread/392462?start=0 & tstart = 0 (thanks alanrenouf)

  I am able to identify a few comments properties via PowerCLI adjustments.

  My question is how to set the value of CustomizationScript with a client cust simple script?

  Is it possible to store it in a $variable?

  Sample script that I first:

  off @echo

  If "% 1" == "precustomization")

  tasks precustomization echo

  ) ElseIf '%1% ' == 'postcustomization')

  cmd /c schtasks.exe/change /TN "\Microsoft\Windows\Defrag\ScheduledDefrag" /Disable

  )

  Thanks for the help.

  Answered by tests.  It's the double quotes.

  $civapp = get-CIVApp TEST

  $script =

  "@echo off".

  If "" %1% "" is "" precustomization"")

  tasks precustomization echo

  ) ElseIf "" %1% "" == "" postcustomization"")

  cmd /c schtasks.exe/change /TN "" \Microsoft\Windows\Defrag\ScheduledDefrag"" /Disable

  )"

  Foreach ($civm to ($civApp |)) Get - CIVM)) {}

  $GuestCustomization = $civm. ExtensionData.Section | Where {$_.} {GetType () - like "* GuestCustomizationSection"}

  $GuestCustomization.Enabled = $true

  $GuestCustomization.ChangeSid = $false

  $GuestCustomization.ResetPasswordRequired = $false

  $GuestCustomization.CustomizationScript = $script

  $GuestCustomization.UpdateServerData)

  }

  Post edited by: jgreenback

• Help with a script that detects the content in a cell and apply the cell style to line

  Hello

  
  

  I am trying to add an article to my table formatting script that is a cell with the word 'Budget' (but this can be written as ' Budget:' or ' Budget: (E) "- but without the speech marks) and apply the cell Style - SponsorCells - to all the cells of the whole line. I currently have on what it will, but it does not work:

  
  

  function checkWhichTable()
  {
  // ensure the user made a selection
  if (app.selection.length != 1)
  return null;
  var currentTable = app.selection[0];
  if (currentTable.hasOwnProperty("baseline"))
  {
  currentTable = app.selection[0].parent;
  }
  while (currentTable instanceof Cell || currentTable instanceof Row || currentTable instanceof Column)
  currentTable = currentTable.parent;
  if (!(currentTable instanceof Table))
  {
  // No table selected
  return null;
  }
  return currentTable;
  }
  app.doScript(checkUserSelection, ScriptLanguage.JAVASCRIPT, undefined, UndoModes.ENTIRE_SCRIPT, "Process Table");
  
  
  function checkUserSelection ()
  {
  var a_table = checkWhichTable();
  if (a_table == null)
  {
  if (confirm("No table selected. Do you want to process *all* tables?") == false)
  return;
  allTables = app.activeDocument.stories.everyItem().tables.everyItem().getElements();
  for (aTable=0; aTable<allTables.length; aTable++)
  {
  processTable (allTables[aTable]);
  }
  } else
  {
  processTable (a_table);
  }
  }
  function processTable(table)
  {
  // do something here!
  
  
  //Set 1st Row Height
  table.rows[0].height = "30mm";
  
  
  //Find Text in Cell and apply Cell Style to Row 
  var  
    myCellText=['Budget', 'Budget:', 'Budget: (E)'];  
   var myRegEx = new RegExp("^("+myCellText.join("|")+")$");
    for (i=0; i<table.cells.length; i++)
    {
      if (table.cells[i].texts[0].contents.match(myRegEx))
        table.cell[i].appliedCellStyle = "SponsorCells";
    }
  
  
  //end - do something here!
  }  
  

  
  

  I can get the script to apply the cell style to "SponsorCells" for each cell that contain the word 'Budget' etc, but I need cell ever on this line to have the cell style applied. I tried to re-write line 56 which applies the style to a cell, but I can't seem to make it work. Any help would be great.

  
  

  Separate on this issue, I would like to have a line of code similar to the 46 line, which sets the 1st height of lines, but I would like to say "If a cell has 'A cell Style' and then applies the value height 10 mm". If someone could result as a help of bonuses, things would be great double.

  
  

  Thanks in advance!
  

  But that could be painfully slow. To speed things up, follow these steps:

  var cells = table.cells.everyItem().getElements();
  for (var i=0; i
  It is faster, because it creates an array of cells with a call to table.cells, which is several times faster than calling table.cells. And before assigning to line 12mm height is useful to check if it is already 12 mm. checking things in InDesign and do things only when it is necessary is much more effective than simply doing things even if they are not necessary.
  		   

• Launched AFTER the script that launches InDesign startup scripts

  Hi all

  I m using a script that, in some cases - when the application is closed-, launch InDesign.

  The problem is that this script uses a variable set in startup, but it s undefined scripts.

  I tried to test (variable == undefined), to protect the script logic, but they almost always have an accident with an "undefined" error (?).

  It seems to be a timing problem between the two scripts that run at the same time.

  You have an idea on how to solve this problem?

  Is it possible to give absolute preference to startup scripts?

  Why does not no comparison undefined?

  Concerning

  If (typeof variable == "undefined") {}

  No variable...

  }

• How to get back 1 day to correct the changes that I made for my home page? I have Windows Vista.

  I changed my home page to word windows by mistake. How to return to 05/06/2010?

  While restoring the system back to the last points in time, it does not affect the data (just the program and system files and settings)- so it will not help in this situation.

  You may have a previous version on your system (depending on your version of Vista):

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky.  They have so-called saves shadow copies, which are deleted or modified files that can be recovered in case changes/deletions made by mistake. http://www.Microsoft.com/Windows/Windows-Vista/features/shadow-copy.aspx more information about how to use this feature to: http://blogs.techrepublic.com.com/howdoi/?p=145.

  If you have Vista Basic or Premium of Vista, shadow copies is not available; However, there is an alternative that is free and the shadow copies feature called Shadow Explorer. http://www.howtogeek.com/howto/windows-vista/recover-files-with-shadow-copies-on-any-version-of-windows-vista/.  Although it will not help you this time, it could very well save you in case this happens again.

  I don't know if it can be retrieved by the program that created it (but if he was crushed under a word document, then I fear that the original is lost, unless you can use snapshots as explained above).

  I'm sorry if this isn't what you wanted to hear, but it's the way Vista works a round trip time of data in the past are not a feature it offers (except as noted above).

  I hope that you have the right version of Vista and you can find the previous version.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Help with a script that converts the HTML object text box

  I don't know anything about programming scripts and unfortunately inDesign isn't any panel actions as Photoshop..

  I need a script to convert a text box with HTML code inside a HTML object... I think not, it should be very difficult

  How could be the following:

  (1) select the text box
  (2) cut all text inside
  (3) remove the empty box
  (4) select selection tool
  (5) go to OBJECT/INSERT HTML
  6) paste it into the code before you cut the text box
  (7) OK and close the menu INSERT HTML code

  If the Script works, we could change with HTML code inside a text box to an object HTML (video, card, animations,...)

  The first step could be manually selecting each text box or by selecting all of the boxes that start automatically by "< iFRAME '

  1000 thanks

  Remember that you can not get an answer it if you don't show any attempt of your choice.

  FWIW

  Loïc