Set the SPA3102 PSTN

Similar Questions

• Transfer to PSTN calls on the SPA3102 VOIP does not work with voip providers who do not proxy outbond

  I use the SPA3102 to transmit calls from PSTN to Voip network. Work very well with a local Voip provider calls Vono (www.vono.net.br), I think that this provider is the one who has the outgoing proxy. However, I would like to use the SPA3102 forwardin PSTN calls with other providers such as Freevoipdeal, VoipWise, VoipRaider etc... These suppliers have no outbound proxy. How can I get around this? According to the link below, you need to plan an outbound proxy. What should do?

  http://www.Cisco.com/en/us/products/ps10024/products_qanda_item09186a0080a359ae.shtml#q

  For example, freevoipdeal voip provider guides that leave the field blank outgoing proxy as below.

  https://www.freevoipdeal.com/SIP

  You can leave the outgoing Proxy field blank.  You do not have to have an entry in this field for the SPA3012 works correctly.

• The SPA3102 to PAP2T PSTN line

  Hello, I need to use the RTC of another building connected to the first by a link radio. I have an SPA3102 connected to the RTC and PAP2T line in the other building. the configuration I did is the following:

  On the line PSTN SPA3102 tab:

  PSTN-to-VoIP Gateway Enable: Yes

  PSTN Caller Auth method: no

  PSTN through line 1 ring: no

  PSTN to VoIP CID CID: Yes

  PSTN Caller default DP: 2

  Off hook while VoIP call: no

  Dial Plan 2: (S0<>[email protected]/ * / _address:port >)

  where userid is any user name you configured in line PAP2T configuration, ip_address is the PAP2T ip address, port is the Sip Port configured on line PAP2T configuration.

  Call without Reg: Yes

  PSTN response time: 3

  Under the tab line SPA3102:

  Turn on numbering IP: Yes

  Configuring the tab line PAP2T :

  Call for years without Reg: Yes

  Problem is I get the PAP2T call but I'm not able to do. Can U help me understand my mistake?

  Thank you

  One more thing... I have connected the spa3102 on my local network through an "ethernet" port and there is nothing plugged into the port of 'internet '. Is this a problem?

  Yes, I'd say it's generally a problem.  My opinion is that the SPA3102 was not designed/tested to make calls using the SPA3102 network premises and which could be the reason why you have audio problems.  You must be using the 'Internet' decision-making (WAN) and for the ip addresses using DHCP from the router or use a static ip address in the subdomain of your main router.

  If you change the IP addresses, you need to adjust the ip addresses used in your direct ip call configuration.   You must use ip addresses that will not change over time, if the router is restarted.  The use of router is to route the packets between the ip address used for the SPA3102 and the PAP2T.  You are generally not required to configure a path between the two addresses.

  In addition, you are running an earlier version of the SPA3102 (3.3.6) firmware. The current version of the firmware is 5.2.13 and can be download here:
  https://software.Cisco.com/download/release.html?mdfid=282414112&SOFTWAR...

  Make the above change and post a few new sip debug trace of problem calls and configurations showing the ip address changes.  The syslog posted show the title of the messages, but do not show the detail of the messages (Sip, Sip 200 OK, etc.).  Details will show the addresses by the call for audio.  Maybe a program different syslog can show detail.  Cisco has a simple windows pc program you can download here.

  https://supportforums.Cisco.com/document/36921/using-slogsrvexe-utility

  On the SPA3102 and the PAP2T System tab, you have an ip address for a syslog and a debug server.  You only need an ip address for the server to debug.

• SPA3102 PSTN to voip

  Hi all
  What am I supposed to hear when the SPA picks up the call?
  My VOIP works and my PTSN works. Ive plugged the socket "phone" on my Fax (which is on the same phone number as adsl, and is set to 'reply' mode) 'line' on my SPA3102 and implemented according to the instructions of JMG (www.jmgtechnology.com.au/spa_3102_guide.pdf). The fax receives faxes. If I dial my phone number of voip phone attached to the rings SPA and everything is good. So: I dial the fax number, the phone in the SPA rings, then it stops. Here, I'm guessing that the SPA should have picked up the call (after the series of 5 seconds). But the phone I cling will tone, that it seems Ive been hung up on. I had once a voice saying: 'Please enter pin followed by the key voice portal sharp code', but that only happened once and the PIN that I had, I put in the SPA did not work. Is that what I'm supposed to hear? What am I supposed to hear when the SPA picks up the call?
  Thank you
  T.

  On the SPA3102, if you 'Ring through line 1', Yes, an incoming call from the PSTN line rings the phone on the SPA3102 to the number of seconds defined in the PSTN answer delay setting.  After the gateway PSTN-to-voip the SPA3102 will get the call.  If you set the PIN then the gateway which will respond to the call and give you three "beeps" as a signal for you to enter a PIN.  If you have authentication set to None and the default dial plan configured to receive dialing number, you will hear a dial tone.  If you have authentication set to None, and the defined default dial plan to automatically dial a voip number that you will continue to hear ringing until the answer to the voip call.

  I don't know what the impact is a device of fax on the PSTN line.

• Creating ports FXS to using Extensions on the SPA3102 and PAP2T

  Dear all

  We have a CISCO SPA3102 and a Cisco PAP2T adapter available at two of our branches. The two branches are connected via LAN. Need to configure the FXS ports on two branches to work as extensions on IP. Kindly let me know if this could use these devices or to buy the new device and how we can create plans of numbering on both devices. Reference diagram. I don't have a lot of experince work with VOIP so your support devices will be very useful.

  Concerning

  Muhammad

  You can configure direct ip, calls between the two adapters.

  The diagram shows the SPA3102 ip address is 20.20.20.5 and the PAP2T ip address is 20.20.20.10.

  I would setup the SPA3102 with a username of 2001 and the PAP2T with a username of 2002.

  When you pick up the phone attached, a dial plan of (<>[email protected]/ * /: 5060 > S0) on the SPA3102 should call line PAP2T configured with Sip Port 5060.

  When you pick up the phone attached, a dial plan of (<>[email protected]/ * /: 5060 > S0) on the PAP2T must call the SPA3102 line 1 configured with Sip Port 5060.

  I would like to change the port numbers sip on each adapter by default 5060 to something else, but that is not a requirement.

  On each line adapter configuration you need to set enable component IP: Yes, call without Reg: Yes, and call without Reg: Yes. NAT Mapping Enable must be not on each card.

• Unable to set the paper size at all when using Firefox built-in PDF Viewer

  I use the built-in Firefox pdf viewer and it's fab.

  But if I try to print, I go to the preview before print and go through the layout and it is useless, because it assumes that my book is almost SQUARE, and the only options I have are portrait and landscape. I use A4 paper, like most of the British and European.

  Of course, I can't work around the preview before printing or that it ends up in the wrong settings by default.

  Adjust (default), it is only based on the width (if I set the margins to zero - it's okay), but lacks the lower half of the page because Firefox think my paper is the PLACE for a reason any.

  The only thing that works is to set the zoom to print at 60% and have tiny everthing, which is ridiculous.

  Any ideas? Is it possible to manually set the width and height of the paper?

  Thanks if anyone can help with this - my alternative is to use the Toshiba reader of PDF files, and it prints terribly to be unreadable. The print quality on Firefox is fine, if I could get to fit on paper...

  Hmm, in your screenshots, why mention the title bar of the window Yahoo mail? Is it an attachment that is somehow embedded in the message? If so, can you find a way to see it in its own tab? Sometimes with the right button > setting > Open Frame in a new tab will do, but I did not open Yahoo Mail to experiment.

• How to set the new tab to open a homepage

  After the recent update to version 44.0.1 I lost the ability to open a new tab and open the new tab homepage. Someone can help me.

  Thank you

  Do you mean when you open a new tab, you want to see your regular home page instead of the page of the new integrated tab on Firefox?

  41 of Firefox is no longer uses the browser.newtab.url setting in about: config because he was constantly attacked by malware. From 41 of Firefox, you need an add-on to change the new tab page.

  Here are a few options (I'm learning more all the time):

  • If you are already using the "Restorer of classic theme" or "Tab Mix Plus" extension: There is an option somewhere (!) in his dialogues of the parameters to select another page in the new tab.
  • If you want to use your new tab homepage: Try https://addons.mozilla.org/firefox/addon/new-tab-homepage/
  • If you want to set another page or a completely blank page: Try https://addons.mozilla.org/firefox/addon/new-tab-override/
  • If you want the cursor to move in a search box in the page: Try https://addons.mozilla.org/firefox/addon/custom-new-tab/

  Use only one of these methods at the same time, otherwise there may be conflicts and dysfunctions.

  Setting up substitute new tab and new tab custom

  After installing one of these extensions, you must use the Options page to set the new desired tab page (instead of use subject: config).

  Open the page modules using either:

  • CTRL + SHIFT + a (Mac: Cmd + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the side right, find the new tab replace or custom new tab and click on the Options button. (See first screenshot attached).

  New tab Override

  Depending on the size of your screen, you may need to scroll down to enter the address in the form. (See second screenshot attached). For example:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Then tab or click this form field and you can test using Ctrl + t.

  Custom new tab

  It is easy to enter your favourite homepage address. If you check either of the boxes, the expansion will set the focus in the page as well, for example, the cursor will be in the Google search box. (See third screenshot attached). I had to leave Firefox and start it up again before new custom tab started working, but this may have been due to tests so many extensions back to back.

  Success?

• I want to set the default url of all new additional tabs I have open - how please?

  When I'm already browing and I choose to open a new tab opens on the Yahoo search engine, and I don't see how to change this. I want to open with google.co.uk. The first page is the default in Firefox and it works very well - it's just the extra legs that are the problem.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can watch the pref browser.newtab.url the topic: config page and set this pref to the URL of your preferred the new tab page.
  You can use these special pages or set the pref to the URL of your preferred the new tab page.

  • the new default tab with the tiles page is on: newtab
  • the default homepage is Subject: Home
  • to a blank page, you can use Subject: vacuum

  The pref browser.newtabpage.enabled must be set to true to use the page defined through browser.newtab.url like the new tab page.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• How to set the number of connections to the server. I am rejected after three connections.

  The following message appears when I consulted three folders in my email...-'unable to connect to the IMAP server. It may have exceeded the maximum number of connections to this server. If so, use the advanced settings of the IMAP Server dialog box to reduce the number of cached connections. »

  You can connect to an IMAP server as often as you like, BUT...
  You can restrict the number of simultaneous channels that are open during this connection.

  Thunderbird sets a default limit of 5.
  You can go higher on some servers, or you can go as low as 1.
  Try to set the limit of connection for 3

  "Tools - account settings - [select your account] - server settings - [settings of the server] - advanced - maximum number of connections to the server for cache - [enter 3]"
  If it is already set to 3, to descend more down - 2 or even 1.
  Out OK

  TB - 38, Win - PC 2

• How to set the default zoom according to the screen in Linux level?

  Starting from the same account, I can use different types of screens: low and high DPI. I would like to have the font size (and more generally, the zoom level) right of each screen.

  To set the default zoom level, you can set the layout.css.devPixelsPerPx, but we can't define it it fixed-value, which is not OK, because I would like that the value depends on the environment (as for the font size in the menu which is always OK, because it depends on the resource Xft.dpi X 11).

  Note: I have several profiles, while it is not even possible to write a wrapper that could modify the prefs.js file, because I don't know in advance which file would I need to change.

  What can I do?

  One possibility would be to use the mozilla.cfg file in the Firefox program folder.
  This file can contain JavaScript that runs with full chrome privileges and it it not difficult game of the pref layout.css.devPixelsPerPx to a correct value for the screen currently attached.
  You will need to know how to calculate the dimensions of the screen.

  • http://Mike.kaply.com/2012/03/16/customizing-Firefox-AutoConfig-files/
  • http://Mike.kaply.com/2012/03/22/customizing-Firefox-advanced-AutoConfig-files/

• I cannot set the outgoing port Thunderbird 38.0.1.

  Thunderbird 38.0.1 does not allow me to set the outgoing port, parameters of account or in the Assistant accounts again. To be able to do was my only reason for considering change of Qualcomm Eudora. This flexibility is apparently available in earlier versions. It is now a feature requiring the paid version?

  Thunderbird is not free so no idea what you are talking about a paid version.

  The menu bar, select Tools - Account Settings

  At the bottom of the account from the list on the left side is Server outgoing (SMTP)
  As the name suggests, you configure the outgoing server there.

  No menu bar tools showing? Press the ALT key.

• How can I set the password for iPad 2 Air to something else than "immediately"?

  I have three iPad, iPad 2, iPad 2 Air and tha iPad Pro.

  My iPad 2 Air gives me the option to "set the password immediately".

  the other two iPads give options, for example, 15 minutes, 1 hour, etc.

  All three iPads running the latest IOS.

  is this a glitch with my iPad 2 Air or are they all like that?

  Why the 'immediately' is the only option? It looks like the other options are missing.

  Thank you.

  Try the help in this support article > using a password with your iPhone, iPad or iPod touch - Apple Support

• How can I set the period I store deleted messages before finally delete them?

  When I delete emails from my Inbox etc., it is useful to keep them in the trash before finally to delete. I want to first period before they disappear finally

  If you right click on your trash folder then properties / retention policy. Turn off use my accounts in
  Mark delete messages over and set the number of days.
  Clear the option always to keep tracked messages

• How to set the contrast of the screen of the iMac?

  Bought a new light to the office where I have the iMac 27 ". Unfortunately, the light produced by this new device shines more directly on the screen of the iMac, does the old light. Thus, when the light is on, the iMac adjusts the contrast of the screen so that the display appears quite washed out. When I turn on the light, the iMac readjusts the contrast to normal. (No, I can't adjust the position of the device, it is mounted directly on the desktop in the only possible way.)

  This seems to be an automatic adjustment of the iMac. At least, I can't find any sort of manual for setting the contrast. Is it possible to do so. Create a new color profile? Another tool?

  Thank you!

  Steve,

  You have a "automatically adjusts brightness" setting in system preferences > displays > display...?

  Automatically adjust the brightness or Ambient light compensation (depending on your screen)

  If your Mac has detection of ambient light, you can have the brightness of the screen automatically adjust according to the current light conditions.

  

  

• How to set the language of the application in the yosemite

  I am located in Sweden, but use the English language on my computer. Yosemite is configured to work in English. Stbbonly Firefox insists on having a Swedish interface! How can I change it to English? The solution given in the help; set the language preference in the region and the system preferences/languages does not work. In fact, I have removed all the languages but English.

  I never had this problem in the Mavericks (10.9)

  Hello Svenne_I, you can choose the language at the time of installation (but default firefox would have offered you the Swedish version when it detects that the request is from Sweden).
  You can simply go to https://www.mozilla.org/firefox/all/ where all languages are listed and download and install the English version on top of your current installation - all your Favorites, passwords and customizations will remain...