Set the width of the text in order to display the entire message

Similar Questions

• BlackBerry smartphones can not see the list of the entire message when I opened the messages icon.

  I used to be able to see a combined list of my emails, texts SMS, missed calls, voice messages and anything else when I open Message folder icon on my Blackberry Curve 8330 office, but now when I open it, all I get is a blank white screen.  When I hit the menu button, the menu appears without a problem and if I click on the trackball, it will open a message, but I do not see the list itself.

  Also, when I go to view the folder I can access an individual folder and they come very well.  The only problem is the list of the combined messages that you are supposed to get when you open the icon on the desktop (or the application menu).

  Could someone help me please

  First thing... do a reboot simple: with the BlackBerry device powered on, remove the battery a few seconds and then reinsert the battery to restart.

  Now, that is the visible screen?

• How to set the entire line to be active?

  Hello guys, I wanted to know if there is a way to define the line with all its elements to be active at a time.

  i.e. If a line contains a title, a text and an image, aligned horizontally next to each other, what I want is clickong on one of them all will focus on the line.

  and thank you

  Hi you can use listfield or see this link

  http://StackOverflow.com/questions/1872160/how-to-customize-a-list-field-in-BlackBerry

  Thank you.

• Set the failure message on the display of the results of the second attempt

  Hello

  I have put 2 attempts for the quiz of all and to customize the message of failure for the second attempt failed such as:

  • On the first attempt failed, the message reads: sorry! You can't pass this time. Resume the quiz.
  • On the second and last attempt should read the message: sorry! You do not have. Please review the course.

  I know that I can put a message of failure Quiz Préférences > settings > Quiz result Messages > Message Fail. But I can put more than one failure message (the first one) and one of the last attempt in Captivate 5.5?

  Please let me know.

  Welcome to the forum,

  Try to change the number of levels of failure (accordion Action) from 1 to 2. You will get two legends of failure in this case, you will be able to change.

  BTW, it's a good idea to mention the version of CP you use (detailed, because there is a difference between 6.01 and 6.1). Sorry, did not read you use 5.5

  Here, still too early. My workflow is to issue level, not on Quiz level. To change the legend of failure then, I don't see an easy workflow immediately. Stocks advanced and custom issues, it is certainly possible, but with test blades by default, you don't have much control over the objects on this slide of quiz.

  http://blog.lilybiri.com/question-question-slides-in-Captivate

  Lilybiri

• How to set the entire volume of an audio track?

  I'm sure it's very simple, but I can't figure out how to do this.

  Audio mixer Panel, that's what you need to open

  Window > Audio Mixer

• Voicemail for the removal of blackBerry Smartphones without listening to the entire message

  One of my children made a habit of 'butt dialing' me by mistake, leaving messages of 5 minutes.  Lack of knowledge what else to do, I have to listen to him walk around with a voice hushed for a full 5 minutes before I can hit "7" to remove the message.  There must be a better way forward quickly at the end of a message. I tried all the keys as well as the # and *... Help!

  So you kick 7 is not fast enough?

  Delete, repeat, fast forward, etc., keyboard shortcuts for your voicemail come from your operator, not BlackBerry. You should check with your carrier about voice shortcuts.

  For example, on mine, typing press the 3 deletes the virtual machine.

• How to access QML object to display the error message.

  Hi all

  I have a request. I got a login screen ("asset:///qml/screenLogin.qml"). "Connect" OB button I click sendt asks the server sending the XML data as a response.

  After that, I am parsing the XML data by using Connection Manager. Code is below:

  /*
   * LoginHandler.cpp
   *
   *  Created on: Jan 15, 2013
   *      Author: Ekansh
   */
  
  /*Parsing the Login Response Structure.
  
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
  
   */
  
  //#include 
  #include "loginhandler.hpp"
  
  #include 
  #include 
  #include 
  #include 
  #include `
  #include 
  #include 
  
  namespace bb {
  namespace cascades {
  
  LoginHandler::LoginHandler() {
      // TODO Auto-generated constructor stub
  
  }
  
  LoginHandler::~LoginHandler() {
      // TODO Auto-generated destructor stub
  }
  
  bool LoginHandler::startDocument() {
      qDebug() << "Start of the document.";
      return true;
  }
  
  bool LoginHandler::endDocument() {
      qDebug() << "End of the document.";
      return true;
  }
  
  bool LoginHandler::startElement(const QString &namespaceURI,
          const QString &localName, const QString &qName,
          const QXmlAttributes &atts) {
      qDebug() << "Start of element" << qName;
      for (int i = 0; i < atts.length(); ++i)
          qDebug() << "  " << atts.qName(i) << "=" << atts.value(i);
  
      return true;
  }
  
  bool LoginHandler::endElement(const QString &namespaceURI,
          const QString &localName, const QString &qName) {
      qDebug() << "End of element" << qName;
  
      if (qName == "sessionid") {
          sessionid = tagValue;
          qDebug() << "sessionid:: " << sessionid;
      } else if (qName == "error") {
          error = tagValue;
          qDebug() << "error:: " << error;
  
          /*QmlDocument *qml = QmlDocument::create("asset:///qml/screenLogin.qml");
          //Container *root = qml->createRootObject();
          AbstractPane *root = qml->createRootObject();
          QObject *newLabel = root->findChild("errorObject");
  
          if (newLabel)
              newLabel->setProperty("text", "error");*/
  
      }
      return true;
  }
  
  bool LoginHandler::fatalError(const QXmlParseException & exception) {
      qWarning()
              << QString("Fatal error on line %1, column %2: %3").arg(
                      exception.lineNumber()).arg(exception.columnNumber()).arg(
                      exception.message());
  
      return false;
  }
  
  bool LoginHandler::characters(const QString &str) {
      qDebug() << "Characters" << str;
      tagValue = str;
      return true;
  }
  } /* namespace cascades */
  } /* namespace bb */
  

  When I put the wrong credentials, I want an error message to display on login QML.

  See the code in the EndElement this handler method.

  But I am not able set the error message when the connection QML.

  Help, please.

  You can set the label with the message as below. Condition that you specified label with the same "errorLbl" objectname qml

  QObject *lblError = bb::cascades::Application::instance()->findChild("errorLbl");
      if (lblError)
          lblError->setProperty("text", "error");
  

  -Dishooom

  I hope this helps...

• I try to install Captivate 8, trial version, but I get the following message appears: missing part archive file of Adobe Captivate 8 (64-bit)

  The entire message says:

  The file archive part of Adobe Captivate 8 (64-bit) is missing.  You need all parts in the same folder in order to extract Adobe Captivate 8 (64-bit).  You can download all the parts.

  What Miss me?  When I downloaded the file Captivate_8_x64_LS21, he said that it would be an extension of the .7z, but have downloaded as a .exe instead.

  Hello

  You receive the error because the two files (.7z and .exe) of Captivate 8 not downloaded in the same place.

  Please find the procedure for downloading and installing Captivate 8 (64-bit): -.

  Say the mention of the link below in any Internet Explorer open Web browser

  https://www.Adobe.com/cfusion/TDRC/index.cfm?product=Captivate

  Sign in using your Adobe id and your password, then you will be redirected to download the Captivate 8 Web Page.

  Do not click download. Kindly leave this window open as it is.

  Now copy and paste the reference to the link below in the new window of the same Web browser in which you opened the link above.

  http://trials3.Adobe.com/AdobeProducts/CPTV/8/Win64/Captivate_8_x64_LS21.7z

  Then Save the file.

  Do the same for the mention of the link below and save the file .exe so.

  http://trials3.adobe.com/AdobeProducts/CPTV/8/Win64/Captivate_8_x64_LS21.exe

  Make sure the two files (.7z and .exe) save/download in the same folder/location.

  NOTE: Wait for the two files at the end of download and then run the .exe file.

  Once you run the .exe, it will begin to extract the .7z file and provide Captivate 8 folder on your desktop that contains setup.exe. Run the setup.exe to install 8 Captivate.

  Kind regards
  Ajit

• I have MIcrosoft XP and Incredimail 2.0 and you have the following message: runtime error

  The entire message is as follows:

  Position of the box: Mocrosoft Visual C++ Runtime Library

  Runtime error

  Program: C:\Program Files\IncrediMail\Bin\ImApp.exe

  This application has requested the execution to terminate in an unusual way.

  Plese contact the support team of the application for more information.

  I have no answer for you, except offer links to "application support team".

  Forum of IncrediMail
  http://forums.IncrediMail.com/
   
   
  IncrediMail Help Center

  http://www.IncrediMail.com/English/help/choose-your-version.aspx

• Is it possible to set the width of a text label of a document?

  Hello - we have a library template that is downloaded with labels of text for the merge fields, {{my_text_tag}}.

  Everything works fine, except that in the rendered document, the width of the text field is not set to scale the content in the field, but just the space allocated for the field. That is to say, if we have a field that will contain a number:

  > You will be charged for $30.00 in two weeks.

  in the document, and set the field as:

  > You will be charged for {{weekly_billing_amount}} in two weeks.

  When the fields are merged and then sent to the signatory, the output looks like:

  > You will be charged for $30.00 in two weeks.

  Is it possible to send a parameter via the text field to set the maximum width of the field? something like {{weekly_billing_amount:width(10)}}?

  Thought about it - missed me the dollar sign in front of the defined var:

  {{#dollar =! weekly_billing_amount}}

  {{$dollar}}

  Make the desired output.

• Setting the width and the height of the elements (texts, images), with custom percentages associated with the width of the browser

  Dear Muse-Geeks,

  I'm really pleased with the ability and especially the ease use of Muse. But I couldn't imagine that the width of a text box, image, the box cannot be defined as a percentage of the width of the browser.

  But now after some research on the web I really seems the only option is the 100% browser width.

  I just missed something to set a value in percentage (vertical/horizontal) size?

  Concerning

  André

  Hi Woods

  When you talk about the size of objects as a % of the browser, I think you are talking about the responsiveness of the site. If Yes, then it is not possible to create sensitive sites in Muse at the moment. But yes, you can set the width to 100% for some items and a slide show full-screen only.

  Kind regards

  Aish

• Why "t" sometimes sets the mode of fonts in width fixed?

  While I type in the text the character "t" do not sometimes type but puts the police in fixed-width mode. I have to go back and give police the width Variable (by default) in order to keep the text of the strange look. The fault is not in the keyboard that I tried three different ones so far and the problem persists. It's very strange and disturbing!

  Well, the shortcut is Ctrl + T, so at a guess your missing shift or anything that is adjacent to the CTRL button and invoking the shortcut.

• set the width of the table header

  I have a fairly simple VI that resizes columns in a listbox MC based on the size of the text. The only thing I do not know how to implement is including the row headings. I don't see a property to set the width of the row header cell. Suggestions?

  

  Column = - 1

• How to get and set the length and the width of the content of the layer?

  How to get and set the length and the width of the content of the layer

  All layers are packed not equal. a layer as adjustment have no limits. Layer to smart object can have two different sizes. The size of the object and the size of the object may be transformed. All smart object layers have an associated transform. To transform a smart object layers you need to work with the size of the object the generated pixels fot the layer. Text layer can be resized with a transform or by changing the font size. Pixelated layers are resize via a transformation.  The script method is resize.  When you resize the number of pixelsits made by interpolation. You can specify what method to use or set Photoshop interpolation preferably by default.

  There is also a bug in Photoshop scripts if you pause the story said make a selection and use resize. Photoshop will properly support up to a State before where you suspended history. This bug seems to be in all versions of Photoshop.

  If you look ate the script in my bug report, you should get a good idea of how to resize a layer.

  Photoshop: Bug Script resize the rear paper folded to a history State

• Set the column width in the report

  Hello

  I have a standard classic report in one of my applications.

  I want to set the width of the column of the report and but not in pixels, it should be in percentages (%)

  In the attributes report in each column, there is a column width text field, but it accepts only the pixels and percentages.

  Last Version 4.1, database 11g

  Thank you

  RameshP, OracleAPEXDeveloper wrote:

  I have a standard classic report in one of my applications.

  I want to set the width of the column of the report and but not in pixels, it should be in percentages (%)

  In the attributes report in each column, there is a column width text field, but it accepts only the pixels and percentages.

  Use CSS. Add a style sheet in the header HTML property page:

  th#ALIAS,
  td[headers="ALIAS"] {
    width: 40%;
  }
  

  where the ALIAS value in the attribute selector matches the required column alias.

  Please note that the specified percentages compared to the width of the report table. Therefore, it may be necessary to also specify widths (100%) for the table of report and its components. Exactly how is based on the report, the region and the page templates and theme used, information that was not provided.