set up for the BIG - AND - plus size small desktop computer?

Similar Questions

• Optimal, set up for the airport and the power network line?

  Hoping to any network gurus can advise on the optimal configuration for my network.  Current configuration is as follows.  1 Zyxel DSL modem configured to act as the router, PPPoE (not the bridge mode) mode, which is the default value.  2. Airport Time Capsule (ATC) connected to the modem via an ethernet cable plugged into the WAN ATC port.  ATC configured in Bridge mode.  Adapter network line connected to the LAN of the ATC port.  2nd line network adapter is connected to the opposite end of the House where the Time Capsule wireless signal is weak to non-existent.  Airport Express (AE) plugged into 2nd network adapter line.  I have a lot of devices (computers, printers, cell phones, DVR, etc.) which must connect wirelessly to the network.  Here are my questions:

  1. is it better to act as the router, rather than on the bridge, as I have to reconfigure the modem in Bridge mode and the most convenient way to connect using PPPoE Airport Airport?  Or is it not important?

  2. my hope is that by using the network adapters and the AE in the part of my house with the worst WiFi signal, I can push the range of my network and all devices to give a good signal.  My hope is that the devices will be connected to any signal is stronger.  At present, ATC and EI do not have the same network name (or password).  It is better for them to broadcast 2 differently named networks, or both would be they networks of broadcast with the same name and password.  Or is it not important?  Is how important it that the ATC is able 802.11ac, EI is just 802.11n?  For reasons not clear to me, even though I have several 802.11ac devices (MacBook Pro and Nexus5x), they are on the 2.4 ghz band (I even if ca is the 5 ghz).  Don't know if something is set up wrong on my ATC.

  All the equipment is running the latest version of the software (OS X, iOS, Android, etc.).

  Thanks for any advice.

  1. is it better to act as the router, rather than on the bridge, as I have to reconfigure the modem in Bridge mode and the most convenient way to connect using PPPoE Airport Airport?  Or is it not important?

  Doesn't matter, unless there is a special feature like the network option of comments on the airport... that would require that the airport be configured as router.  Airports are not known for their reliability, PPPoE, so it is best to have the modem or modem/router to provide the credentials of the PPPoE connection.

  2. my hope is that by using the network adapters and the AE in the part of my house with the worst WiFi signal, I can push the range of my network and all devices to give a good signal.  My hope is that the devices will be connected to any signal is stronger.

  If the two access points use the same wireless network name and password, Mac will do a nice job of automatically move from one access point to another to pick up the best quality signal as they move home... but iPhones, iPads, and most of the PC will not.  If you name the two networks as well, so you will need to get used to temporarily disable WiFi on iPhone, iPad, etc. When you move from one region to the other. Then, when the device is in the new location, turn on the WiFi and the device usually pick the strongest signal from the nearest access point.

  If you use names of separate network for access points, you need to manually switch networks on each device whenever the camera moves from one region to the other.

  Is how important it that the ATC is able 802.11ac, EI is just 802.11n?

  Well, you know that the Express is not "ac" capable, so any device "ac" close the Express will connect at low speed "n".  You will probably not notice a difference in respect if your Internet speed is less the Express features.  If you copy large files from one computer to another or backup on the network, then a device that connects to the Express is going to be slower than a device capable of "ac" that connects to the ATC.

  For reasons not clear to me, even though I have several 802.11ac devices (MacBook Pro and Nexus5x), they are on the 2.4 ghz band (I even if ca is the 5 ghz)

  Everything in the wireless is a compromise. In other words, to get something, you must give up another.  "ca" is used to that in the band 5 GHz, so if your devices are connect 2.4 GHz, they connect to a slower 2.4 GHz signal.

  Here is the compromise...

  5 GHz signals have capacities of speed much higher than the 2.4 GHz signals... BUT... 5 GHz signals are significantly weaker than the 2.4 GHz signals. So you're really not going to get the benefit of 5 GHz, if your device "ac" is in the same room or it has line-of-sight with the router "ac".

  If a device of "ac" is a room or two away from the router "ac"... the device will probably connect 2.4 GHz... because these signals are more powerful penetration of walls and other obstacles a lot better than 5 GHz can never hope.  It is also possible that the 2.4 GHz signal several rooms away the router will also be the fastest signal at this location, because the signal slows down more it moves the router.  5 GHz quickly signals really slow down.

• A software says I need 4 MB of VM set aside for the program to run.

  Original title: virtual memory.

  How to set 4 MB of virtual memory in windows xp? A software says I need 4 MB of VM set aside for the program to run.

  Hi KennethBrasel,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description provided, looks that you receive a virtual memory message when installing a program on Windows XP computer.

  By default, the virtual memory paging file that is created during installation is 1.5 times the physical RAM on your computer. Therefore, a computer that has 1 GB of RAM installed will have 1.5 GB of virtual memory.

  You can manually change the size of the swap file to make it larger or smaller. You can also optimize virtual memory use by dividing the space of files between multiple drives and by removing the disks slow or very open space.

  He would be grateful if you can answer this question in order to help you further.

  1. What is the size of your RAM memory?
  2 are. what program you referring?

  I suggest you try the following steps to change the virtual memory:

  a. Click Start, right click my computer and then click Properties.

  b. in the System Properties dialog box, click the Advanced tab.

  (c) in the results pane, click settings.

  d. in the performance Options dialog box, click the Advanced tab.

  e. in the virtual memory section, click on change.

  f. change the initial size value and the value of maximum size to a higher value, click on set and then click OK.

  g. click OK to close the performance Options dialog box and then click OK to close the System Properties dialog box.

  Note: With virtual memory, the computer can use the hard drive as memory (RAM) space. The computer uses virtual memory to increase the ordinary RAM that is installed on the computer. If you reduce the size of the pagefile, some the program may not start correctly or may not start at all. This problem may occur even if the computer has plenty of RAM.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• You cannot change the icon and font size

  Huge icons/fonts DPI of Windows Vista problems

  I logged on one night this week and all the icons and the font is huge!  "I did the ' set the DPI ' as realized several times and rebooted but it will not change size.  Help!  Thank you

  Hello

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  or:

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Customization of file exchange: what is the initial and maximum size recommended?

  Hi everyone and hurt.

  
  After response of harm to my question on how to install diskettes, evil said:

  
  "allocation of disk: is a three step process, first of all, you set the boot order in the BIOS, then you format the windows disks and assign drive letters, then again Windows you set up for the swap file." Then the allocation of media preview cache, project etc. is made in preferences, and setting up a PR project."

  
  and I have a question about the pagefile.

  
  First of all, let me tell you describe my new machine, there a configuration to 4 disks, no RAID, 16 GB RAM, with OCZ Vertex3 for programs and the OS, which I installed Windows 7 Ultimate 64 bit on this disc, Web Premium CS5, and Acrobat 9 Pro. In the BIOS, I did drive OCZ (OS), be the priority in the boot order.

  Later, after checking the system is functioning, I'll upgrade to Classic Collection CS5.5, so at this point, I named my 3 expansion packs to this title.

  
  WDC WD 2002FAEX-007BA0 - "Media Projects (D).
  WDC WD 1002FAEX-00Y9A0 - "Swap file, media Cache (E)"
  WDC WD 1002FAEX-00Y9A0 - 'previews, Exports (F).

  Then, because now they are simply names I gave on different drives, and I'm trying to change the paging file, switching happens in the disc of the operating system, in order to arrive in the disk that will be designated for media Cache (by the Prime Minister, subsequently).

  Thus, in the performance of Windows Options pane, I went to the Advanced tab, and under virtual memory, I hit 'change', uncheck automatically manage file size exchange for all readers, select drive E, which is the drive that is having the pagefile to happen there.

  And the question, assuming that I'm supposed to select custom, size can harm you, or / and others, please recommend the initial and maximum size?

  Alternatively, I have to select "system managed size"?

  Thanks :)

  Minimum,.

  Where you put the pagefile just does that much of difference, when you have 16 GB (as you do) and 24 GB still less so (as the user in the other thread).

  If I had your material, I put on E: and make static at 16 GB min and max 16GB (bad suggests same size).

  I don't spend more time reading or to dwell on "static pagefile" However unless you want to purely for fun.

  When you have enough RAM that your applications require no more you have, Windows must either ask for a large part of this file. Ten years when the RAM chips were much smaller and the cost per GB was more expensive that now, details of page file were indeed more important than they are today.

  Jim

• Can I set null for the 'DiscoGroup.0.stdout '?

  Hi all:
  Can I set null for the 'DiscoGroup.0.stdout '?
  Because this file is too big, 22G, so I want to set to null to this file, I can do this action?
  [appfmrlt@csslxa02 jvm] $ pwd
  / U01/Oracle/fmrlt/ora/IAS/Apache/JServ/logs/JVM
  -rw - r - r - 1 appfmrlt s/n 22G 18 May 09:33 DiscoGroup.0.stdout
  
  
  
  
  
  My environment: oracle ebs 11.5.9. Red Hat 3.0 | Oracle 9.2.0.3
  
  
  
  
  Concerning
  Terry

  Terry,

  Yes, it is safe to do so. You can make a backup of the files or rename it, and you better stop Apache before doing so to raise again.

  Thank you
  Hussein

• Please help I'm looking for the dowload 10.10 update my dads computer and I can not find it! Does anyone know where could it have?

  Please help I'm looking for the dowload 10.10 update my dads computer and I can not find it! Does anyone know where could it have?

  10.10 is no longer available unless you had previously downloaded. In this case, it would be in the purchase of the Mac App Store section. Its not available for direct plus download.

  You can directly update 10.11 El Capitan.

• Add Hardware Wizard asking to install drivers for the keyboard and mouse.

  Original title: Assistant material is locking up my computer...

  Assistant adding hardware asks me to install the drivers for the keyboard and mouse however, it locks the computer and I can't type or click on anything whatsoever.  If I go into the set-up menu to reboot, the keyboard works fine.  How can I stop this from happening?

  I was able to run an analysis of the system through the establishment and who has solved the problem of mouse enough to do what else to do to solve the problem.

  Thank you for your reply and your help.

• Recently, I changed the password for the administrator and I forgot what it was.

  original title: password__ administrator

  Recently, I changed the password for the administrator and I forgot what it was. The profile of my son is set to standard, and I can't access anything whatsoever. I don't have another administrator account to change the password again. I have created a disk to reset password on the profile of my son and I'm going to change the password on the account and it will allow me to do to change the password, and then it pops up with an error, when I'm finished. I also tried to activate the net user administrator safe mode and it appears with and error 5 on that. Can someone help me please.

  Hello

  Unfortunately, it's in the code of conduct for these forums to help users to circumvent passwords and security settings. You will need to remember the password or reinstall.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• How to change the fonts and font size in sticky notes

  Original title: reminder

  How can I change the font and font size in sticky notes?

  Hi Jerry,

  Thanks for posting the question in the Microsoft Community!

  See the article to format the text in a sticky note in the site:

  Use reminders

  http://Windows.Microsoft.com/en-us/Windows7/using-sticky-notes

  If the problem persists, or in the future if you face problems of Windows let us know and we would be happy to help you.

• In photoshop CS5 (bridge) I could select all the images and their size still before turning them into JPEG files. I can't find a way to do it in CC

  In photoshop CS5 (bridge) I could select all the images and their size still before turning them into JPEG files. I can't find a way to do it in CC

  Hi Tanuj.

  I actually understand it. Not the best user friendly system. Where as before (CS5), I just had to go to crop tool and choose the dimensions and the inches now it in the window. Just really complicated for nothing.

  Thanks anyway Tanuj

  Melanie

• define the users for the studio and server Integrator

  Can you get it someone please let me know how to set the users for the studio and Integrator server so that the user can be used to display the page in the user interface but not change. I want to set the studio user that will access the Page but not modify it. And the user at the server of the Integrator must be able to view scheduled tasks.
  
  Thank you very much.
  
  Kind regards
  Amrit

  Amrit,

  Points are awarded automatically when you mark an answer (5 pts) useful or correct (10 pts).

  Is there a help icon in the label of the legend for the different rankings. The answer to your question is on this page.

  RLJII

• How can I add a separate apple for the iphone and ipad wife id

  How can I add a separate apple for the iphone and ipad wife id

  Hi, are the measures already implemented? If they are, you need to configure them again and establish a Apple ID at this time.

  Apple ID - Support official Apple

• How to get back my data for the health and the watch Apps once I've restored my phone?

  How to get back my data for the health and the watch Apps once I've restored my phone?

  From the backup, you're going to be restoration.

  If you back up to iTunes, make sure that it is an encrypted backup.

• Is it possible to play different sounds for the emails and instant messages?

  Hello

  I was wondering if it was possible to play different sounds for the emails and instant messages. I use Thunderbird quite often with emails and instant messages imported from Gtalk.

  I think it would be very convenient to be able to distinguish the two sounds, because they do not involve the same things.

  Thank you very much.

  Olivier Hubert.

  There are only six modules of cat, three of them are on notifications. Choose the one you think will do the job for you. https://addons.Mozilla.org/en-us/Thunderbird/Extensions/chat/?sort=popular