Set up the alarm is triggered when the migration of VM with DRS

Similar Questions

• Advantage of the portfolio after the migration to HSM with Oracle 11.2.0.1.0

  Hello
  
  I found this integration for Utimaco Cryptoserver guide: http://hsm.utimaco.com/solutions/db-encryption/ and now I wonder if it is necessary to keep the original portfolio after the migration of HSM with Oracle 11.2.0.1.0. As I understand it, eventually all the necessary keys are stored in HSM. Is still used portfolio in a way or is it possible to reuse maybe after you set the METHOD to FILE sqlnet.ora?
  
  Thank you

  Hi flyer007,

  If you used the Wallet before Oracle, then migrate the master key of TDE from there to an HSM is a renewal of key operation; the keys of the table (for the TDE column encryption), and tablespace (for TDE tablespace encryption) key is decrypted with the old key in the portfolio) and encrypted again with the new MK unified (in the HSM).

  Your RMAN backup files, export files Data Pump and same 'live' in the redo logs, TEMP and UNDO tablespace can be encrypted with the old MK in the wallet, that's why we NEVER delete the portfolio.

  Of course, the Oracle database automatically knows what MK he needs.

  Good luck

  Peter

• How to set up the keys on Toshiba with WinAmp on Portege M800

  Hello

  any ideas how to map the keys shaded on M800 (next, reading, etc.) to other media player software?

  Thanks for the info on [email protected]

  Hello

  AFAIK you cannot configure keys like play, stop, forward with WinAmp.
  All applications that might make are not known to me.
  The buttons are configured with WMP (windows media player).

  See you soon

• How to set up the PL/SQL Developer with customer instant

  Hi buddies!
  
  I want to install PL/SQL Developer. I would like to install Instant customer? I need to install the PL/SQL Developer in my pc that will access the database of the server.
  
  Please enlighten me.
  
  Thank you.
  
  See you soon!
  
  Nith
  
  Published by: user645399 on May 12, 2010 16:26

  user645399 wrote:

  Here are the steps I followed.
  

  I don't see a problem with these steps. It is correct. Step 7 is redundant (because of the where you have placed the tnsnames.ora file)-it is only really necessary when you place the file in another directory where +%ORACLE_HOME%\network\admin+ is no longer applicable.

  Note that the customer himself, needs to load the DLL of OIC InstantClient - and this DLL uses the settings of environment and the rest of "do its thing".

  If customer load another customer Oracle DLLS, then bets are open InstantClient is used, never mind will work.

  Only one copy of a DLL can exist in memory. So if some other s/w is using other DLL OIC, then this DLL is already loaded and will be used by all other client s/w. Nothing will be able to use the DLL itself InstantClient.

  Therefore, make sure that no Oracle client driver is loaded at all. Then make sure that when the client s/w requests to load the DLL of the OIC, it is loaded from the InstantClient directory.

  As far as I remember, the core Win32 LoadLibrary() call is made by the application - if the DLL is not in memory, the current (in the virtual machine for this process of Windows) directory is used. If the DLL does not exist there, the %PATH% variable is used to find and load the DLL. DLL usage meter is then set to 1. When multiple processes require the DLL, it is incremented. When a process ends, the usage count is decremented. When it reaches 0, its unloaded from memory.

  Result of all this is that only one module DLL (whatever the number and versions of the physical DLL files on disk) can reside in the kernel space, and you must ensure that the correct physical DLL is loaded by the kernel.

• How to set up the new HP laptop with the bad hard drive notebook

  Children a new Hp laptop in June.  The hard drive has been getting gradually stronger and is obviously about to go, with a blue error screen forcing a roll back of the computer.  I did a full backup on an external hard drive and I'm back for a replacement.  Should I make a recovery disk and reinstall from the disc when I get the new laptop, or should I just plug the external hard drive and transfer files via?  A guy at work said using the recovery disk is the way to go, because it would be to reinstall Norton and other programs, we have installed., but I thought that backup external hard drive was supposed to be the way to do this

  Because you have found a replacement of mobile complete, it will be installed on the 'old' came with.

  If you have installed a new programs, games etc_then Yes restore the Image would be the best way to get back it quickly. This would assume that the replacement is the same model or very similar from a Image Restore the drivers also which should match the material of the machine.

• Changing the character set in the database 11G

  Running Windows 2008 Server 64-bit and Oracle 11 g (V 11.2.0.1.0). I would like to change my default character set when installing from 11 G to CS AL32UTF8.
  
  I read the utility Guide and Guide Support for globalization (http://docs.oracle.com/cd/B28359_01/server.111/b28298/ch11charsetmig.htm#g1011430), but none of these documents shows how you can effectively change everything / the character set of the migration. I would do this using the export and import utilities since this seems to be the most popular recommendation. But I'm really not sure of the procedure to follow to change the CS. For example, should I first export and then import then run the CSCHANGE script that is described in the globalization support Guide?
  
  I would be grateful any guidance on how to actually change the character set to AL32UTF8 and all documentation that explains not only the concepts, but the STEPS of HOW this can be done. Thank you, J

  Salvation;

  Please see:

  Change the character set of database - a brief overview Doc ID: 225912.1
  The National character located in Oracle 9i, 10g and 11g Doc ID: 276914.1
  Change the character set of database - definitions valid superset Doc ID: 119164.1

  Respect of
  HELIOS

• Qosmio F50 - 10Z - how to set up the bar multimedia?

  Greetings, have a question... because after a long time, trying to make it work, I can not find the problem...

  On my laptop, I reinstall Windows Vista, download all the drivers for the Toshiba for Qosmio F50 driver page, for Vista... and even how to set up the multimedia bar? With Dolby, sound on / off, light power... He s doesn't work do not. Are there special software required? Or can I put it somewhere?

  Thanks for help

  Use this-> http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU research of Value Added Package 1.1.19

• How to configure the network home wiFi with dlink router

  I need to create a home network using the dlink WiFi router
  a computer with Vista and the second with XP
  can someone tell me what havo to do to configure the router etc etc o give me same informamation on where I can learn to do
  I want just the old pc with xp for the server and the vista one customer but more importantly I need the file on XP to migrate under vista.
  Thank you very muche for your end of the patient cooperation
  in return, I give free cooking classes
  see you soon

  I'm not sure if you are asking how to set up a secure wireless network, if you ask how to share files between your two computers (and there is no "customer" or "server" in a working group, in a field - which is not), or both.

  So I will give you information on doing both.

  Router - configure manually

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.
  2. attach a class (usually supplied with the router) ethernet cable cat5e port Internet/WAN from the router to the ethernet port on the cable modem.
  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.
  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.

  Networking

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  XP - configure Windows to login automatically (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  Vista - Start ORB > Search > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.
  MS - MVP - Elephant Boy computers - don't panic!

• Associate the Migration repository SQLDev 4.0 EA1

  Currently getting the following error when you run the Migration repository associated with DB12c:

  SQL error on executing the Script

  Try to delete the repository before the creation of repository

  IT seems that the process is complete, because the database object is created.  However I do not understand this in GR 2 11 or XE.  Any ideas.

  Made a DatabaseDiff and here are the results:

  Types:

  MIGR_REPORT_DETAIL_ROW

  MIGR_REPORT_DETAIL_TABLE

  MIGR_REPORT_SUM_ROW

  MIGR_REPORT_SUM_TABLE

  Index:

  MD_STORED_PROGRAS_IDX2

  MD_DERIVATIVES_PERF_IDX1

  MIGRLOG_PERF_IDX

  MD_ADDITIONAL_PROPERTIES_IDX

  MD_DERIVATIVES_PERF_IDX3

  MD_DERIVATIVES_PERF_IDX2

  MD_TABLES_PERF_IDX2

  MD_TABLES_PERF_IDX1

  MD_DERIVATIVES_PERF_IDX4

  MD_COLUMNS_PERF_IDX

  MD_DERIVATIVES_PERF_IDX

  Bouquets:

  MIGRATION

  MIGRATION_REPORT

  MIGRATION_TRANSFORMER

  Body of packages:

  MIGRATION

  MIGRATION_REPORT

  MIGRATION_TRANSFORMER

  Post edited by: dbcapoeira.  Database diff report has been added.

  Hi dbcapoeira

  
  

  I would say that the database user has no privileges on tablespace space.

  Something like:

  delete and create the user from a sql command prompt then "Grant unlimited tablespace to " DBA. then associate the repository

  (partner must do everything that creates it and inserts)

  (Grant "resource", used to give privileges on tablespace space, not in 12 c).

  You can create a table in the tablespace without data in 12 c as it is a metadata operation - no blocks are affected in the target tablespace.

  An "empty" from repository has a few entries of data such as its version number.

  -Turloch

  Team SQLDeveloper

• How to set preferences for what happens / appears when you click the new tab

  I used to have seen my sites more used, but for some reason that I don't have more since I uninstalled a toolbar that has become the default search engine itself!
  So now, I want that, instead of having an error message; the new tab display a tab blank when I click on button ' + '!

  You can check the browser.newtab.url pref on the topic: config page and set this pref to your preferred the new tab page.

  • the new default tab with the tiles page is on: newtab
  • the default homepage is Subject: Home
  • to a blank page, you can use Subject: vacuum

  The pref browser.newtabpage.enabled must be set to true to use the page defined through browser.newtab.url like the new tab page.

  See this article on the page tab (topic: newtab):

  • https://support.Mozilla.org/KB/new-tab-page-show-hide-and-customize-top-sites

• When I try to set up the synchronization and open an account, I get the invalid e-mail when I start typing my e-mail address.

  not valid email appears when I try to set up the synchronization

  Just keep tapping until the e-mail address is typed completely.

• Set up my tabs, but then when I go and hit the home button dublicates my original tabs, how can I stop that?

  preparation of the tabs when I hit my home screen, how can I stop the it occuring

  This is normal with the home button action when the user has multiple set of home pages.

  When the home button is hit, the active tab is responsible for the first defined homepage, 2nd & subsequent home pages are open in new tabs.

• Why isn't my old watch backup appear in the list when you set up the replacement or new shows?

  Why isn't my old watch backup appear in the list when you set up the replacement or new shows?

  I've been upgraded to a new watch, and during the installation of my phone would not offer a restore of backup.  The problem is that the factory OS on the new watch was 2.0.1 while backup of my old watch watch OS 2.1.

  I had to implement the new shows like new, then update the OS 2.1, désapparier it and pair it again.  It gave me the option to restore the backup of the original watch origin.

  [Must be like the iPhone backups, you cannot restore a backup of a newer operating system that the phone is running.]

  Hello

  Yes it is true backup must be the same ios

  See you soon

  Brian

• How is to send the native port of the printer command, when the printer is set as the default printer?

  I installed on a Windows XP printer and set it as default printer.

  I also have the manual provided by the manufacturer of printers, which defines the

  commands that can be sent over the serial port, then the status of the printer

  is extracted.

  Thus, for example, by sending an order consisted of 3 bytes: 34,56,78 to the printer (COM5) COM port

  I can get an answer advising me on the State of the printer.

  However, when you send this command to COM5, I get the following exception:

  "The given port name does not start with COM/com or is not resolved to a valid serial port. Parameter name: portName. »

  for which the printer vendor insisted on request microsoft support center.

  The port name of the printer is properly set to the correct a (COM5).

  Any ideas?

  Hello

  Your Windows 7 is better suited for the IT Pro TechNet public.

  You can follow the link to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

• I'm working on a given HP computer where the administrator was already settled by those who have set up the system when it was given. Error: 0 x 80070005 access denied.

  I'm working on a given HP computer where the administrator was already settled by those who have set up the system when it was given. Now, I am trying to perform an action that requires me to use the program of scheduled tasks. I have problems with passwords and user ID. It defaults to the Userid of the machine number/administrator. I put the password when asked, but I was rejected when I finished to complete the scheduled task that I perfom. The scheduled task, I wanted to do was simply to have iTunes launch and play a song both partiucular. After completing all the details, I must click on 'Apply' or 'OK' and then I get an another dialog box asking that I get the password once more. I enter the password I put at the beginning when the application Assistant came on - but I get access denied - and the error number 0 x 80070005. Help, please. Thank you. * E-mail address is removed from the privacy *.

  original title: "error: 0 x 80070005 access denied."

  Hi HaikMuradian,

  For this particular issue, there is a fix available, you can contact Microsoft Customer Service & provide article 904423 which contains the fix.

  Reference: Error message: "0 x 80070005 access denied. You are not authorized to perform the requested operation"

  Hope the helps of information.