Qosmio F50 - 10Z - how to set up the bar multimedia?

Similar Questions

• Qosmio F60 - L10 - how to set up the tv with integrated antenna tuner?

  Good evening
  I have a toshiba qosmio f60, I read your answer about tv tuner.
  My question is: how to set up the tv with integrated antenna tuner? Thank you

  The tuner is already configured!
  You must use Windows Media Center.
  Here, you have to choose the tuner and need to look for available DVB - T channels.

  Notes; Signals DVB - T depends on the country and region.
  In my area I needed an external antenna because the signal is too weak.

• Qosmio F50-108: How do I use the NVIDIA SLI technology

  I own a laptop Qosmio F50-108 and it has a Nvidia GeForce 9700 M GTS graphics card that supports NVIDIA Sli technology.

  How to use this feature?

  Hello

  AFAIK your Qosmio model was equipped with card NVIDIA GeForce 9700 GTS * M * graphics chip.
  It should support the PureVideo HD, HybridPower, etc.

  The HybridPower is a switch between performance or battery life.
  If you need more graphics power, you can turn it on and if the graphic power is not needed, you could disable to extend the battery working time.

  AFAIK the HybridPower can be enabled in Vista manually Power Options in Vista and in according to some gossip in the next time that the nVidia driver should control this function automatically. But these are only a few gossip that I found on various Web sites.

  Maybe this can be useful:
  http://HotHardware.com/articles/NVIDIA_Hybrid_SLI_and_nForce_700a_Chipsets/

  Big names

• Qosmio F50 - 12L - how to turn off the energy saving?

  Hello

  How to turn off recording mode on Windows 7 ultimate 32 bit on a Qosmio F50 - 12L?

  Hello

  What energy saving mode say you exactly?
  Normally in Windows power management you can change the plan of power for energy balanced or High Performance.

  You can also do this, if you click on the battery icon in the taskbar. ;)

• Qosmio F50 - 10Z - how to upgrade to windows 7 ultimate?

  Hi guys,.

  I'm trying to upgrade my Vista Home Premium to windows 7 and I was wondering if someone could give me a step by step guide how to do it. I need 7 Ultimate as my operating system for a new job. Any help would be greatly appreciated.

  Thank you very much

  Kind regards

  ozbanjo

  Hello

  It's pretty easy to perform the upgrade. Read [translation] the Microsoft support page:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  * Note *, first and foremost, you need to enter the Bios (F2/esc at startup of the laptop) and the value of cd/dvdrom as the 1st boot device in the boot option. Press F10 to save and exit. Insert the Setup disk and install

• Qosmio F50 - 10Z Bios Update crashed - how a cmos reset?

  I have a Qosmio F50 - 10Z and prompted by toshiba I downloaded the Bios Update and started to install.
  My screen saver came and it crashed.

  Not turn off (even after pressing the power button for 15 seconds).
  The drums and then put back. Computer skills on but the screen is blank and will not boot to the top.

  Tried to take part to Flash the bios by removing battery cmos/rtc (whatever it's called) but cannot find the battery and got to the point where I wasn't ready to dismantle any more (nobody else never disassembled a?)

  Could not find information or diagram or picture where the battery has been on the net... manual really useless laptop)

  Found reviews records of crisis, but I don't know what that means.

  So, how to I reset the bios?

  Please help - you're my only hope.

  > So, now, I find the cmos/rtc battery (if it's rechargeable explains so why does not easily localized) removed, he persevered on in a more accessible place - always reset BIOS

  Removing battery RTC would not help reset you mate sorry to the ROM BIOS module but what you did was completely useless
  It seems that the ROM modules where the BIOS is stored, was not properly flashed or something went wrong during the flash procedure

  In case of bad you the mobo is unfortunate but I think that Flash module ROM once more with a disc of crisis could help solve this case
  But the fact is that flashing the ROM module with a disc of crisis can be done by a technician of Toshiba ASP.
  That's why I recommend contacting the guys in your country and ask for flashing ROM

• Screen not switch on the Qosmio F50 - 10Z

  Hello

  Recently, I received my laptop Toshiba Qosmio F50 - 10Z (yesterday), I am very pleased with. However I seem to have a problem with the screen does not reverse when you start the laptop in sleep or hibernation mode. I tried to change the output screen (Fn + F5) but it makes no difference, and the laptop screen is always off. I need to cut my machine (5 seconds by pressing the button / stop) and restart manually. Then, the screen lights up again.

  It doesn't seem to be drivers updated compared to those I already have / preinstalled.

  I hope someone can help solve my problem.

  Thank you

  The story is really strange for me also
  I'm 100% sure that Toshiba provides new laptops and if you bought a laptop with a few scratches then you should blame your laptop for the same problem dealer

  Maybe the dealer of the laptop used this camera for a show or similar

  Welcome them

• Boot from the disk ESATA on the Qosmio F50 - 10Z

  Hello

  is it possible to boot from an external drive using the ESATA port?
  I have BIOS 1.60 installed but I don't see an option for ESATA?

  What a USB? Laptop is a Qosmio F50 - 10Z

  Thank you

  I think that it of not possible to start from eSATA. The BIOS should provide this type of functionality.
  I've never tried, but I think that's not possible.

  As far as I know, it must be possible to boot from a USB device.
  The BIOS does not support this then try it.

• Qosmio F50 - 10Z overheating - Cooler recommendations

  Hello

  My Qosmio F50 - 10Z Guard stops due to overheating. I think Toshiba then set up this kind of configuration would have kept this question in mind. in any case, I thought that the solution would be to get a notebook cooler, but the problem is that the Qosmio F50 fan on the far upper right side and most portable coolers have fans more near the Center. I would be grateful if someone could recommend a good portable cooler for this model (or any other solution to the problem of overheating).

  Thank you

  Rehan.

  Rehan salvation!

  I can understand you, but I have at this point, I must say that I have too many Qosmio F50. He models the F50-10B s and also has Core 2 Duo 2.26 GHz but it s quick model with GeForece 9700 M GTS (I know your model contains only 9600M).

  What can I say about this? Well, first of all, I love this laptop. I love the laptops with 15.4 screen so it s not not little and not wholesale. The design of the silver/black is absolutely nice with white lighting. Not the same boring design than on most other phones. All my games work well on this laptop.

  On the issue of cooling, Windows and Office, the laptop is very cool fan doesn t usually works. On my Qosmio laptop I m using two power modes:
  (1) profile of PowerSaver I use for Internet and office: here I defined the maximum processor at 75 State and as cooling method I put in battery. If I can put a lot of power and it s enough for Internet and office.
  (2) balanced: I use it for my games so I maximum cooling performance and the status of the maximum processor that I have set to 100%.

  Moreover, I clean my Qosmio laptop every 3-4 months using a jet of compressed air. This could blow out the dust from the cooling fans and so I don't have to disassemble the laptop. I think that's really good.
  Here, you can get more information about this topic: http://aps2.toshiba-tro.de/kb0/HTD7A01ZZ000AR01.htm

  If you have any other questions, please let me know! :)

  Good bye

• Qosmio F50 - 10Z revolves around 80oc degress

  Hi guys,.

  Have a very little bit of trouble with my Qosmio F50 - 10Z, the GPU (9600M GT) revolves around 80 ^ o ^ c degrees when using, the system has been cleaned with air compress and is in perfect condition of the art, I use the laptop on a table computer as well to ensure air flow.

  Thank you very much.

  AFAIK Qosmio F50 is old enough laptop model and if you use every day on base maybe is time for cleaning professionals. Compress the air is OK but more of dust is just inside and cold air and cooling rack may be blocked by dust.

  I've seen repeatedly disassembled portable and it is raise what it looks like inside after two or three years of use. In my old notebook I found cat s hair.

  What is with cooling fan? It runs at maximum speed?

• Qosmio F50 - 10Z - after update BIOS lit buttons do not work

  TEMPRO alerted me on an update of the BIOS - bios - 20090415092322.zip - for 32-bit Vista, published April 15, 2009 for my F50 - 10Z.

  Since then, the enlightened "buttons" at the top of my keyboard no longer work - including, annoyingly, the key to turn the light off.

  Is that what I can do at this point? I tried a system restore but it did not affect the BIOS.

  I agree with Akuma. Now, you can try to set the BIOS to default settings and also reinstall the package of added value.
  This package also contains command buttons utility.

  Perhaps after having reinstalled it everything will work properly again.

  Please send us a feedback!

• Qosmio F50 - 10Z with windows XP

  Hi all

  I just bought an a Qosmio F50 - 10Z to run a CAD program, which does not work with Vista, unfortunately. I would like to keep Vista and add windows XP in a Setup to dual boot with Vista BootPro.

  Everything seems simple so far, but I am a novice to what follows. Apparently, after some research, I learned to integrate a XP disc with the necessary drivers. I'm a bit of a loss as to what drivers to collect etc so I went to ask the advice of a COMPUTER technician and he said that unless the drivers are available on the toshiba site then it is not possible to install XP at all.

  Is this true?, or is there anything else we can do? The interest to buy the laptop was running the CAD program (which only works on XP).

  Any help is very appreciated.

  > I'm a bit of a loss as to what drivers to collect etc so I went to ask the advice of a COMPUTER technician and he said that unless the drivers are available on the Toshiba site then it is not possible to install XP at all.

  That's nonsense!
  Of course, you will be able to install Win XP but the point is that a lot of portable devices does not work with Win XP due to unavailable drivers or tools

  The XP drivers are not available on the Toshiba driver page, but you can find it on other sites.

  For example;
  Sounds and driver LAN can be downloaded from the Realtek page.
  WLAN driver Intel page or here:
  http://APS2.toshiba-tro.de/WLAN/

  Driver BT from here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Touchpad driver can be used other mobile computer series

• Microphone does not work - Qosmio F50 - 10Z

  Hello

  I have a laptop Qosmio F50 - 10Z.
  For the past two weeks, the internal microphone of my laptop stopped working.
  Its working fine but suddenly stopped working. However when I plug headphones to the microphone and speaker slots pins, it works.

  But without plugging the headphones, it won't work.
  Its really annoying me.

  Advice and assistance is appreciated. Thank you!!

  Have you checked all the settings of the recording device?
  Click on the volume symbol in the taskbar with the right button of the mouse and choose devices to record option.

• where can I get advice on how to set up the iPad for a partially sighted person

  Where can I get advice on how to set up the iPad for a partially sighted person. Are there apps that can help the user, perhaps activated by voice?

  Paul,

  Go to http://help.apple.com/ipad/9/#/iPad9a2465f9and see all the topics under accessibility.

  

• How to set up the password disk HARD on Equimum L40-141?

  Hello

  Can someone tell me how to set up the hard drive on my laptop password above please?

  Thank you
  Jane

  Hello

  Have you checked the settings in the BIOS?
  My BIOS contains an option for the HARD drive password parameter.

  But just a question; Why do you want to set the HARD drive password?
  Is this really necessary?

  You need to know if the HARD drive has been fixed, and that something will go wrong, I mean that if you would forget the HARD drive password, the HARD drive would be locked and is no longer usable.
  So be careful with this password if you want to know my opinion; Don t pay.

  Welcome them