setStatus blocks the background?

Similar Questions

• There is a program running in the background on my computer. It blocks my mouse and I can even hear a clatter, as when you connect a camera to your computer, or disconnect.

  I tried several times to get a solution to this problem.  There is a program running in the background on my computer.  It blocks my mouse and I can even hear a clatter, as when you connect a camera to your computer, or disconnect.  My computer has been analyzed by microsoft help and support was in my computer several times, and accomplished yet nothing worked.  Sometimes my mouse freezes every few seconds until it is maddening.

  original title: hopeless

  It seems that you have tried a number of bugs so far without success. Here are some suggestions of what I'm going to try:

  You mentioned a background current program, if it helps:

  Perform a clean boot to determine if background programs interfere with your game or program
   http://support.Microsoft.com/kb/331796

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Don't forget to follow step 7: reset the computer to start as usual in the link above to return the computer to normal startup.

  I would also check the updates for your video card driver. Find the latest Windows Vista drivers for your specific computer model with the support site for your computer manufacturer. Be sure to get the right drivers for your specific version of Windows Vista, for example, 32-bit or 64-bit.

  If your mouse is a USB model, it can be useful to check the latest drivers for your motherboard (chipset) Vista to the support site for the manufacturer of the computer. Also, since you're here you can check for the other updated drivers for your system, i.e., audio, LAN (network), etc.

  Computer manufacturers
   http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have the graphics card Intel integrated, you can check on the website below:

  Update utility graphics card Driver Intel
   http://www.Intel.com/p/en_US/support/detect/graphics

  If you have a dedicated graphics card, you will need to check with the card manufacturer, the two most often used are linked below:

  NVIDIA driver downloads
   http://www.nvidia.com/download/index.aspx?lang=en-us

  AMD (ATI) drivers & Software graphics card
   http://support.AMD.com/us/GPUDOWNLOAD/pages/index.aspx

  If you have not done so, see the support site of the manufacturer of the mouse for the Vista updated drivers, known issues with your specific models or known solutions.

  An element that may cause unpredictable problems that are extremely difficult to identify are (live RAM) memory errors, Windows Vista has a built-in for system RAM check utility:

  How will I know if my computer has a memory problem?
   http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  How to use the Windows Vista memory diagnostic tool
   http://www.bleepingcomputer.com/tutorials/using-Vista-Windows-Memory-Diagnostics-tool/

  To perform a more complete test is the use of Memtest86 but is more complex, includes the creation of a CD bootable for the test, it is not really something for difficult burn an .iso file downloaded to a blank disc (available in the free download link) and then boot from the CD.

  Memtest86
   http://www.Memtest86.com/

  I hope that something of the above can help lead you to a solution.

  Kind regards

• How can I change the background color of a block of text?

  How can I change the background color of a text frame in InDesign?

  Select the text block with the selection tool black. Activate (click on) the button fill to the bottom of the Toolbox. Then, go in the swatches Panel and click on a color swatch.

• Why States don't work not on view of Tablet for blocks of text on the background image?

  I have a Macbook Pro with Top high S/W config everything up to date.

  With the help of Muse.

  View the site of the tablet.

  Simple text box buttons with States on a picture background full width - WORK only!

  The buttons of the text frame are in the UPPER layer.

  Visible but do not respond to touch everything. At least I have remove the background image.

  
  

  Cannot understand the days.

  
  

  Help, please.

  
  

  Thank you

  
  

  Eli @.
  

  MUSE STAFF!

  I found a major bug that should be fixed:

  For the Tablet:

  A button image or text-related State should be in the upper layer to meet the States.

  If a composition menu is opening and covering the button when triggered - THE BUTTON WILL NOT RESPOND EVEN IF THE COMPOSITION IS CLOSED!

  Only if the button is PLACED over the composition of the layer and becomes the OBJECT absolute TOP in the layer - THEN ONLY he will answer.

  PLEASE LET ME KNOW IF YOU GOT IT.

  I tested it on a few projects and the bug is consistent.

  [email protected]

  Thanks to its fixation in the near future

  Eli

• Firefox blocks the page content how to turn it off

  Firefox shows me the site im trying to go to but part of it is blocked and I have to click on the icon next to the web address to unlock it how can I disable it so I never have to click on the icon next to the web address?

  Have you clicked the button on the toolbar ('A') of the extension to change the background color of the icon from green to red?

  Red means that you allow mixed content.
  You should only set this red on the Web sites that you trust, and if the site does not work properly.

• Firefox does not start, no error message, only works in the background

  I click on Firefox it does not start
  no error message it does not start
  It works in the background in 32-bit
  I have re installed it but nothing changes

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• Frozen in the background on my phone iPhone app

  Since I got the update ios 9.1 my phone has my app messages frozen in the background, even when the phone is off! It is getting boring because it is blocking on the margins of the apps that I have and getting. Someone else has this problem and knows how to fix?

  I have not heard of this problem

  Try a hard reset now the home and sleep/wake buttons until you see the apple logo.

  If this does not work, you may have gotten a bad update. It happens time to time. Back up your phone to iTunes or iCloud and then restore your phone and set it up as news via iTunes. This will erase everything off your phone but also reinstall a new copy of iOS on your device. Once you return to your home screen, check that this problem has disappeared. Then you are free to restore the backup to your phone.

  I can assure that theres nothing wrong with the phone since the issue came just after that you did an update of 99.9%.

• How to change the background color of a text indicator?

  I have an ASCII/text indicator on my FP. FP uses a .png file as the background, with a block diagram. The diagram is a white background with lines black, figures, etc. I wish I could change the background color of the indicator of ASCII text / to white, so that it better matches the white background of the block diagram.

  LabView 2009 SP1 running.

  Thank you

  Have you tried the brush in the tool palette?

• Difficult to scroll with the background color of table cell

  When I changed the background color of cell, the table has become difficult to achieve.

  And I can't finish change the cell background color, it takes forever.

  Anyone encountered this problem before?

  LabVIEW 2011 on WinXP.

  Hello Zou,.

  The problem is not with "background color of the cell.

  But the problem is with the "size of the Table!

  When the size of your table is huge, the windows + chart LabVIEW take longer to scroll.

  Attached VI may help you to experience the same. Change the size of the table and the roll of experience.

  Solution: -.

  1 initialize the Table for that size, if the size of your table is small.

  2. use a table (UI) + Scroll Bar (Manual from Numeric range) + internal buffer (block diagram), for the size of the huge table

  Kind regards

  Yogesh Redemptor

• Open front by node invoke blocks the other FP

  Hello

  In a project I'm working on, I want to open and close a frontpanel showing a few plots of a different VI. I have managed to create the visualization VI and send references to indicators and the VI himself on the next block. I can open the FP using a knot rely on ref VI, but I can only interact with the newly opened VI. To get back that I have to close by pressing X, I would prefer if I could have just running in the background or minimized once I click on my 'main' Vi once again. I have attached screws necessary.

  Hello

  I do not see your code because I've not upgraded to 2014 yet (shame on me ). Here's a main VI which opens a graph VI in two ways:

  1. without running, just by FP. Opened. The main VI continues to meet. It is not really recommended, but I think that's what you do.

  2 (diagram enable disabled): by running the VI using the VI run invoke node. In this way, the chart VI is called dynamically and the main VI is not wait until it is done to continue.

  Good luck

  Danielle

• Change the background color of line indicator

  I'm doing an indicator of string with a black background or make it to which the channel indicator is transparent

  Thank you

  You can change the background color of the control a chain using the paint tool. Choose View > Tool Palette.

  Select the icon below a brush.

  Right-click on the background area of your control of the chain.

  A color mixer will appear - select a color block or the T in the upper right corner to transparent.

• Half of the programs receive the error message: a firewall is not blocking the connection.

  Something stops halfway through my work programmes all have the same error message: a firewall is not blocking the connection, but I No. firewall installed and windows firewall to the wide.

  1. • 
       If possible answer to: * e-mail address is removed from the privacy *.

  its possible that there are firewalls running in the background,

  in particular, if you had installed firewall but they have not uninstall cleanly.

  In addition, some modems also have a firewall.

  Here are my steps to perform a clean boot:

  http://pcsmarties.WordPress.com/CleanBoot/

• How can set the background color of the status bar?

  Quote from the old forum:

  Comments: comments	How can set the background color of the status bar? Posted the: July 17, 2008 02:56
  	How can set the background color of the status bar? Using this code for the status bar: LabelField statusField = new LabelField ("Good Morning", LabelField.USE_ALL_WIDTH |) LabelField.NON_FOCUSABLE | LabelField.HCENTER) { int _backgroundColour = Color.LIGHTGREEN; public void paint (Graphics g) { g.setBackgroundColor (Color.RED); g.Clear (); Super.Paint (g); } }; Font defaultfont = Font.getDefault (); Police smallfont = defaultfont.derive (Font.PLAIN, 12); statusField.setFont (smallfont); setStatus (statusField);

  When I ran the code you have above, my status background color was red.  Is not what you see?  If so, please provide the BlackBerry model and software version that you are testing.  You can find this under Options.

  Or if you try to do something else, please provide details.

  I tested this in the BlackBerry Simulator included with version 4.5.0 BlackBerry JDE (4.5.0.44).

  To do this in version 4.1, first call getColor and save the current color.  Then call setColor, setting the color to the color you want to use for the background.  After this call call fillRect, starting with 0, 0 and go to the size of the field (use this.getWidth () and this.getHeight () to get this).  This must fill in the field with your specified color.

  To allow the drawing of the default content of the field call setColor once again, passing in the original color, then call super.paint.

• Close and notifyDestroyed, just send the application in the background

  notifyDestroyed sends just my MIDlet in the background, but the application is still running. Further more, choosind close on the BB menu (called by pressing the push to talk key) also does not close the application. What I am doing wrong?

  Ok. Finally fixed it!

  It seems that the PushRegistry mechanism was still alive in the background, not allowing the application to close normally. More precisely: the RIM MIDletMain.MIDletPushRegistryWorkerThread support thread has been blocked. I have no idea why, and frankly I don't have the time to investigate it. For now I just closed PushRegistry and the application closes very well.

  In my view, deserves a congratulations to do so, if only for the sake of my Ego... push... push...

  AA I understand, many people who hit similar problems, where it won't leave MIDlets on BlackBerry. So I thought I would give details on how I found the solution:

  I ran the application in the debugger in Eclipse, then leave and looked at the lily of active threads. Normally, after leaving the app, all associated threads must die. Thus, one of the remaining wires related to the app is the culprit:

  

• Change the background color of the text box for the required field

  Guys,

  I want to change the background color of textfield required when the user is in data entry Mode. And when the record is validated successfully the background color should be back to the default.

  That's what I've done so far.

  Created a Visual attribute that contains the background color.

  In the record of the creation of the data block added the code below.

  IF: SYSTEM. BLOCK_STATUS = 'NEW' THEN

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) BATCH ', VISUAL_ATTRIBUTE, 'ENABLE_COLOR');

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) VENDOR', VISUAL_ATTRIBUTE, 'ENABLE_COLOR');

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) AMOUNT ', VISUAL_ATTRIBUTE, 'ENABLE_COLOR');

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) ACCOUNTING_DATE', VISUAL_ATTRIBUTE, 'ENABLE_COLOR');

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) INVOICE_DATE', VISUAL_ATTRIBUTE, 'ENABLE_COLOR');

  ON THE OTHER

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) BATCH ', VISUAL_ATTRIBUTE, ");

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) VENDOR', VISUAL_ATTRIBUTE, ");

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) AMOUNT ', VISUAL_ATTRIBUTE, ");

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) ACCOUNTING_DATE', VISUAL_ATTRIBUTE, ");

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) INVOICE_DATE', VISUAL_ATTRIBUTE, ");

  END IF;

  
  

  And in the key to commit the following code is added

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) BATCH ', VISUAL_ATTRIBUTE, ");

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) VENDOR', VISUAL_ATTRIBUTE, ");

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) AMOUNT ', VISUAL_ATTRIBUTE, ");

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) ACCOUNTING_DATE', VISUAL_ATTRIBUTE, ");

  SET_ITEM_PROPERTY ('MASTER_APM_INVOICE.) INVOICE_DATE', VISUAL_ATTRIBUTE, ");

  
  

  
  

  The problem is, form opens in the mode of data entry, so mandatory fields have changed background color, and mode query and run the query, background colors are changed in accordance with a.

  
  

  Any help how to solve this problem?

  
  

  Also, what tag should I use to highlight the code in my post, the FAQ forum says its {code: sql} but his does not and the code is not formatted.

  
  

  
  

  Concerning

  
  

  
  

  Dear Faisal Niazi,

  Write code to set the normal Visual attribute in the trigger WE POPULATE DETAILS or after REQUEST of the block trigger.

  Manu.