Setting NLS_LANG for schema scott

Similar Questions

• Setting NLS_LANG for a client with multiple Oracle servers

  Hello!
  
  We have a web application that needs to connect to a Oracle servers with different charactersets. When the NLS_LANG on the client is a single-byte encoding and the server has a single byte encoding there is no problem. We now have a server with NLS_CHARACTERSET UTF8 and all special characters (accented Hungarians) are replaced.
  When we put the customer UTF8 the rest of the servers does not work.
  What is the solution for a client and several servers with a different encoding?
  Is there a special touch to the connection string?
  I tried to change the nls_lang with a statement of alter session but without success.
  
  Kind regards
  emeriqus

  NLS_LANG does not depend on the database side, it is a CLIENT of setting to 'make Oracle know what encoding is used on the CLIENT' so that Oracle can perform the conversion of the encoding to the encoding of the data base (NLS_CHARACTERSET) of the customer.

  for AN application/client is only a correct value of NLS_LANG, independently of the NLS_CHARACTERSET database

  If you web application is really a UTF8 application (check with your provider) so you can perfectly use a client UTF8 and a database of 8 bits
  Of course, you will be limited on the side of the database in this case given the 8-bit character set knows not all of the characters in UTF8

  The fact that affecting the NLS_LANG UTF8 "does not work" with your web app is simply the fact that your application is not a UTF8 env.
  Setting nls_lang UTF8 will not "magically" your app UTF8, NLS_LANG is a function of the encoding used on the web server.

  But the first thing you should ask yourself is so common is correctly in the Oracle database.

  SQLdeveloper allows to check the data, it is a "good customer know" who needs no NLS configuration.
  You can download it from http://www.oracle.com/technology/products/database/sql_developer/
  If the data is displayed correctly in SQLdeveloper, then you are sure that it is correct in the database.

  If data are WRONG in the database that must be corrected in the first place, 'try' other client side of configurations will only make matter worse (even if they make the data "look good")

  Kind regards
  Gunther

  Client-side mentalink notes:

  Note: 158577.1> NLS_LANG explained (how work of transformation of characters Client / Server)?
  1.2 what is this NLS_LANG thing?
  3.2 an example detailed installation of nls hard to understand what is happening.
  4.2 How to check parameter NLS_LANG to the customer?
  5.1 my windows sqlplus is not displayed all my extended characters.
  Note: 179133.1> the correct NLS_LANG in a Windows environment
  Note: 264157.1> the correct setting of the NLS_LANG in the Unix environments
  Note: 229786.1> NLS_LANG and servers Web explained.
  Note 115001.1> parameter NLS_LANG to the Client and JDBC drivers

  If you are using Unicode beginning here:
  Note: 788156.1> AL32UTF8 / UTF8 (Unicode) Character Set Implications database

  Setting NLs parameters: Note: 241047.1> the priority of NLS parameters explained.

• Why are there no set upward for IPad etc.?

  Why are there no set upward for IPad etc.?

  Firefox Home for iPhone also explains the situation. Unfortunately, Apple will allow Firefox on iOS, so we cannot release him.

• Set preferences for 'notifications' in El Capitan

  How to set preferences for the "notifications" in El Capitan?

  System Preferences--> Notifications.

• Is it possible to set up for multiple users on the same computer to avoid entering the e-mail and the password

  Original title: Multi users

  Is it possible to set up for multiple users on the same computer to avoid entering the email and password every time that a new user want to check emails?

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. According to the description, you need help in the creation of multiple user accounts. I've surely you will help find a solution on the issue.

  What is the operating system installed on the computer?

  User accounts, several people can easily share a single computer. Each person can have a separate user account with unique settings and preferences, such as a screen saver or desktop background. User accounts control files and programs users can access and what types of changes users can make to the computer. As a general rule, you'll want to create standard accounts for most computer users.

  If you use Windows Vista or Windows 7, see the article below:

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

  http://Windows.Microsoft.com/en-in/Windows-Vista/create-a-user-account

  For Windows XP users:

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783?WA=wsignin1.0

  Hope this information helps. Answer please if you have more queries about Windows.

• When I open a program I get the error message "failed to set data for D3.

  When I opened this program, the first thing that happens is a message that says: failed to set data for 'D3 '.

  I click OK and the program opens and works BUT what does this mean message and how can I get rid of him?

  Thank you

  Finally resolved to get rid of my shopping list and bought a much better program called SPEEDY SHOPPER.  After a few minor bumps, he works and the creator is very good about helping so that I will meet a prob.

  Thank you all

• A software says I need 4 MB of VM set aside for the program to run.

  Original title: virtual memory.

  How to set 4 MB of virtual memory in windows xp? A software says I need 4 MB of VM set aside for the program to run.

  Hi KennethBrasel,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description provided, looks that you receive a virtual memory message when installing a program on Windows XP computer.

  By default, the virtual memory paging file that is created during installation is 1.5 times the physical RAM on your computer. Therefore, a computer that has 1 GB of RAM installed will have 1.5 GB of virtual memory.

  You can manually change the size of the swap file to make it larger or smaller. You can also optimize virtual memory use by dividing the space of files between multiple drives and by removing the disks slow or very open space.

  He would be grateful if you can answer this question in order to help you further.

  1. What is the size of your RAM memory?
  2 are. what program you referring?

  I suggest you try the following steps to change the virtual memory:

  a. Click Start, right click my computer and then click Properties.

  b. in the System Properties dialog box, click the Advanced tab.

  (c) in the results pane, click settings.

  d. in the performance Options dialog box, click the Advanced tab.

  e. in the virtual memory section, click on change.

  f. change the initial size value and the value of maximum size to a higher value, click on set and then click OK.

  g. click OK to close the performance Options dialog box and then click OK to close the System Properties dialog box.

  Note: With virtual memory, the computer can use the hard drive as memory (RAM) space. The computer uses virtual memory to increase the ordinary RAM that is installed on the computer. If you reduce the size of the pagefile, some the program may not start correctly or may not start at all. This problem may occur even if the computer has plenty of RAM.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Whenever I try to set wmc for terrestrial tv

  Whenever I try to set wmc for land "all I get is 6 options for my area, but all are TNT? I had overland in the past, but had to reset the pc after you have moved the pc because of the decoration, & can not find how to configure overland again? I am in the United Kingdom, & postal code is hu5 3bh, I hope for the quick response - glenn.

  Thank you Debra' our young been down & sorted now thanks was missing the original menu set up? then he reinstalled my recovery - tools - Cyb * link Home Theatre, & hey presto' restored full menu... PS have saved me * n site for future refs thanks once again.

• Set alarms for datastore small footprint

  Hello

  I would like to set alarms for data warehouses, it must notify me if there is less than 25 GB space in any data store. Since I'm new to vFoglight I don't know how to write a rule for this. any help is greatly appreciated.

  Thank you.

  This has been answered in a previous thread. See http://en.community.dell.com/techcenter/virtualization/infrastructure/f/4826/t/19555533#49821

  / Mattias

• Microsoft family how to set deadline for Friday go to 12:30, which is not listed

  Microsoft family how to set deadline for Friday go to 12:30, which is not listed

  Hi MARTY,

  Curfew in Windows 7 Family Safety settings do not increment of 30-minute appearance.

  For more information about the time limit feature, click here.

  Kind regards

  BIA of Hamilton

  You can use the mark as answer button, if this post responds to your request.

• Error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I am trying to set up Parental controls for the user account of my son and I get the following error: error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I tried to use the administrator account.

  When I ran the System File Check sfc/scannow

  TI completed indicating certain files may be damaged and cannot be repaired and check the convertible bonds. LOG file.

  How can I know which files are corrupted.

  Any other Suggestions on how to fix this user profile?  Do I have a profile that I don't know?

  Hi wimuggss,
   
  Step 1: Disable UAC (User Account Control) and check the result
  See How can I change the behavior of user account control by using the cursor?
  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.
   
  Important: Enable UAC after you complete the steps.
   
  Step 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
  See Start your computer in safe mode
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What is the function of the IOS minimum set required for VPN site-to-site software?

  Hi guys,.

  I have a Cisco 1841 router to do a VPN site-to site. I would like to know what is the function of the IOS minimum set required for VPN site-to-site software?

  Thanks in advance.

  Hi Ja,

  Advanced security or more should do it. The version of the IOS, you can try later 12.4 T which is c1841-advsecurityk9 - mz.124 - 24.T5.bin, in which case you don't want to go to 15.1 still.

  I hope this helps.

  Raga

• How to set permissions for an account invited under Windows 7 64-bit?

  I'm looking to set permissions for the account "Guest" on my computer. Can someone help me with this?

  I'm all set. Uninstalled and then re-installed Adobe Flash Player then running a 'Junk' cleaner solves the problem. Thanks to everyone who gave me their support. Very much appreciated.

• Is there a way to set reminders for multiple documents at the same time?

  Is there a way to set reminders for multiple documents at the same time? Now he must go through a list, manually click through a series of options, then select it. If I send more than 300 different documents to individuals at a time, it becomes tedious. Quick. A way to save me the trouble would be so so so appreciated.

  Hello Lindsayb123,

  We do have an option to set a generic reminder under choice of account in the accounts of the company and can be set by going to the tab account-> account settings-> send parameters and set reminders.

  Let me know if you need more information.

  -Usman

• I do a layout of paper every two weeks; This time, when I opened my model, set up for the next issue when I typed 'W' to display the grid I have something totally different than previously, a background grid which is more annoying.  Why in the world

  new to InDesign 6 months I do a newspaper page layout every two weeks.  This time, when I opened my model, set up for the next issue, when I typed "W" to display the grid, I have something I never saw elsewhere. ".  The background was filled with a new grid of tiles rather than the void behind the newspaper that I'm used to seeing.  I don't know what happened, but it seems that Adobe has tinkered once more with the program.  The last time this happened, I lost the icon "cover the columns" at the top; now, it's a case of two steps to put the head-lines across more than one column.  NOT useful.

  There is probably a command or a term, I don't know that this right but my main question is why, when I did this dozens of times before, doing something different will come this time.  (I know, without replica.)

  I'd also appreciate comments that someone out there could offer re why now when I tap on InDesign, is there a slight pause before that something happens to the screen.  What is my new Mac, or something to do with the program that I can fix it?

  Thanks, Sacie

  It looks like the grid of the document, which can be disabled in the view menu.