Settings/Options-> advanced-> TPC-> APN

Similar Questions

• Options-> Advanced Options-> question of PTC

  Hi guys.

  I certify on the TCP parameters.

  You know that BB has options for TCP (Settings / Options-> Advanced Options-> TCP: "APN", "APN username" and "Password for APN").

  Can I connect via HttpConnection without any configuration (without suffix: ";) APN = wap.cingular; tunnelauthusername = user; tunnelauthpassword = password'), when the user set above parameters such as "APN is wap.cingular", "[email protected] username" and "password for APN = cingular1?

  In other words, if the user set Options / settings-> Advanced Options-> TCP, I must determine '; APN = wap.cingular; tunnelauthusername = user; tunnelauthpassword = password '.

  Is this good?

  If the user has not indicated the Options / settings-> Advanced Options-> TCP, I need set up: «;» APN = wap.cingular; tunnelauthusername = user; tunnelauthpassword = password '.

  Is this good?

  Thank you.

  Your interpretation is correct.  The TCP (not PTC) options are used only if there is no value specified in the connection URL.

  Not that different carriers may have different requirements, for example, I understand Verizon don't require any setting at all for deviceside = true for work.

• Options, advanced, "there's no ' disk space and network"?

  I searched "how to compact the received messages on mozilla" the answer say ' options, advanced, and then click on 'network and disk space' it is NONE 'disk space and network"not anywhere on advanced settings, 'general' to all that. This is not the first time an answer to my question produces the same results, not on my computer.

  Are you running the latest thunderbird? Are these messages imap or pop?

• How to disable the setting button in Tools - Options - advanced - network of windows registry?

  Dear support,
  Now, my office has use Firefox as default browser to access the Web server. And there is a policy that users must use ProxyServer. I don't want to change user setting in Firefox proxy. How to disable the setting button in Tools - Options - advanced - network of windows registry?
  Thank you.
  Treky

  You cannot use the Windows registry to disable the elements in Firefox. This link shows how to lock the proxy settings of Firefox, change the values as needed:
  http://www.stbernard.com/ip5kb/iPrism/whatsnew/50SupportFiles/SupportFiles/IP0460.htm

  A change of minor importance, in step 4, instead of add this line to all-js, you can create a file called local - settings.js containing the indicated line and save the file in the same folder as all.js

• My Adobe Acrobat failed upadte w error 1321 the installer has insufficinet privileges to modify the file...  I followed the instructions Adobe online to change the settings in advance. Now, try to reinstall my Adobe Acrobat, but I don't see the download o

  My Adobe Acrobat update failed w error 1321 the installer has sufficient privileges to modify the file...  I followed the instructions Adobe online to change the settings in advance.

  Now, try to reinstall my Adobe Acrobat but I don't see the download option when I connect to my Adobe account.  Help, please.

  I would also like to confirm that I have uninstall my Adobe Acrobat before reinstalling.

  OK I finally found the download option

• I'm looking for which generation of an iPad that I, or when it was built. In the "Settings" option, I can only find model number - MDIILL/A

  I'm looking for which generation of an iPad that I, or when it was built. In the "Settings" option, I can only find model number - MDIILL/A

  Click here and look it up.

  
  (141071)

• Windows installed the automatic windows update agent and I would appreciate help with the settings option in this newly installed agent update so no update never install or download unless I choose to do.

  Hello.

  I have windows vista 32 bit home edition.

  Today somehow automatically installed windows ' automatic update agent 747600226

  I always keep my settings to check the updates but let me choose whether to update or install.

  With this new "update automatic agent" which automatically installed on my system, I want to make sure I have place it properly so that it remains in the same way that I always have my settings but two settings (options), he checked, and are confusing for me to know what those checked settings will do.

  I would like to help you with these settings to make sure that the update is still as I want.

  Below chose correctly when the new program installed today.  That's how I still want the settings to be:

  Look for updates but let me choose whether to update or install

  Please let me know if I need to change all the options account required in addition to this update agent to ensure that only, I choose to update or install.

  There are four options and a box is in two and I don't know if I should remove the check marks or not.

  Here are the other four options that I need to know how to configure it so that only I have update/install.

  Once again, the download automatic microsoft today (update automatic agent 7.4.7600.226) without asking for my incentive preset automatic update options and that's what I'm trying to make sure is set correctly so that nothing installs or updates without asking me or let me do.

  Option 1: (this option is checked. If I leave it checked will be it install or warn me only?)

  Give me updates recommended in the way I receive important updates.

  Option 2: (this is not checked and am not worried about this one)

  Allow all users to use installed on this pc.
  
  Option 3: (this is checked and want to know if should uncheck; what I don't want is any what to auto install, but the wording of this option and option 1 are vague because of the "give me " so I don't know what it means or will do.)  If this box is left to it automatically update/install?)

  Give me updates for Microsoft products and looking for new optional microsoft software when I update windows

  Option #4 (this is not checked, and I am not concerned about this).
  
  See the notification me detailed when new microsoft software is available.

  Thank you very much for your help.

  Take care! :)

  Hello

  The Windows Update automatically updates the updater (himself), regardless of your settings.

  1. Yes it will alert you so you can update or install.

  2. check if you need more of yourself (other users) to be able to select and install the updates.

  3. it will let you know when they become available.

  4. just gives the news of additional details about some of the updates.

  Looks like you're ready for anything you like.

  Rob - bicycle - Mark Twain said it is good.

• Application not shown in Options-> Advanced Options-> Applications

  Hello

  I developed an application that runs in the background, but this request is in the Options-> advanced-> Applications. I wanted to change the permission so that it do not ask for confirmation of sending sms. Can someone let me know why he is not coming to this place. While another application that also runs in the background comes from the Options-> Advanced Options-> Applications, but not the second request.

  We hope to get an answer soon.

  Thank you & best regards

  Sunil

  Load file jad in the device rather than cod using javaloader.

  1. copy your cod and jad file in bin JDE (ex: C:\Program Research In Motion\BlackBerry JDE 4.6.0\bin\).

  2. run the following command from there (you can create a batch file (* .bat) and just click)

  JavaLoader - usb charge applicationName.jad

  Concerning

  Bika

• Lack of Options > Advanced Options > Applications entry for the application of Simulator test

  I'm new to BlackBerry dev and I'm still doing my set up and tested development env.

  EPS consists of XP, Eclipse SDK 3.4.1 BlackBerry JDE plugin for Eclipse 1.0.0.67, BlackBerry component Pack 4.3.0.16 version 4.3.0 and the BlackBerry 8120 Simulator.

  I created a test application simple and loaded on the Simulator for testing through the cmd Eclipse Run > run as > Blackberry Simulator.  As expected, the application icon was displayed on the screen of the Applications (in the Simulator), and, when selected, the application has successfully launched and behaved normally.  So far so good.

  However, when I checked the Options > Advanced Options > Applications on the Simulator, I found that my request was not among others installed apps.  (I tried on two other simulators with the same results.)  I thought about reading the other posts on this forum that I would wait to see this information.   When I install on a simulator I would indeed expect display name information and the app version contained in Options > Advanced Options > Applications list?  If Yes, what should I do to make the information appear?

  Thank you.

  If you install your app in the Simulator simply by copying the COD file in directory of the Simulator (what is JDE when you run Debug), then you should not wait for the application to create. The modules in the files of the cod will be stil it well and that's all that generally the County. You can see the list of modules under Options-> Advanced Options-> Applications-> (Menu)-> Modules. Applications that are included in the Options-> advanced-> Applications are just constructions of metadata on top of modules to simplify various tasks, like setting permissions, adding and removing applications rather than tracking dependencies and individual modules.

  PS, You can programmatically create the entries in the application using the CodeModuleGroupManager and CodeModuleGroup if you really must have your request under Applications. Do not however forget that classic pose methods (Desktop Manager, Web OTA Download, BES OTA Push) all create them the entries in the appropriate application. So, you don't usually have to worry about this problem in the production environment.

• Feedback Option advanced response messages

  I use 8 Captivate. I have a choice of questions multiple quiz with 3 options, each with a feedback: answer option advanced, 1 correct and incorrect 2. When I got out to HTML and preview the quiz in Chrome or IE11, boxes of your comments do not appear. This works well if output as SWF, but I need to output to HTML

  Still, I have installed 8.0.3.290 with 9, will check a second time.

  Just tried it out with a QUIZ, with a correct answer (only way to have advanced the answer option work) and everything worked as expected for me when I saw HTML in the browser. Then I published in HTML format and had a different opinion: everything is OK.

  It's because of my version of 8 or something wrong on your side.

  My configuration:

  • 4 responses
  • Infinite attempts
  • for incorrect responses: message to show your comments and action 'no action '.
  • for the correct answer: Show feedback message (changed its color) and action "continue".

• "settings" option on the ground ' and 'frame mix' now, the movement is stuffy!

  Hello! "I messed with settings" option on the ground "and"frame blend"try to improve image quality already very low - and now plays and export stiff/jerky movement... !! For any help or suggestion would be appreciated! does anyone know how to return back or increase the fluidity in movement smooth - it's too late to cancel...  Mixture of framework does not work!  Thank you!!!  Cally

  To go back, you can use a backup or a registered copy.

  Mixture of frame on the timeline is only useful when the framerate of the element does not match that of the timeline.

• Corresponds to a sequence settings option is no longer available?

  CS6 using, my option on the export to click a "Match sequence settings" box displays more time. How can I return this option?

  Thank you.

  On your screenshot, I can tell you are not encoding

  starting a sequence, but an individual clip:

  

  If you were encoding from a sequence,

  "All music" would not have an option.

  And, as you encode an individual clip, there is no

  "Sequence settings" to debate (because it is not part of a sequence).

  So... any check box.

  "Fit the sequence settings" option is available

  when encoding from a sequence:

  

• Articles in 'Tools' > Options/advanced/network/settings tab are grayed out. I'm trying to clear cache. may also have Firefox do this automatically, but cannot get there. Why the menu options are grayed out?

  Firefox 3.6.17

  (1) you may need to click the background box ("use of manual settings") to activate the manual configuration of the proxy.

  (2) see How to clear Firefox cache.

• When I first open the browser the web page does not load. I need to go to tools, Options, advanced, network, settings and change the Manual Configuration of the Proxy to no Proxy, and then click Retry.

  Once I change my browser proxy works very well. The problem is whenever I open the program.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

  See also:

  • http://KB.mozillazine.org/Preferences_not_saved
  • https://support.Mozilla.org/KB/preferences+are+not+saved

• XP Home a settings tab advanced when no. KB310751 says there should be. How could it be? The DMA check!

  Read the steps in KB310751;

  Click START, click RUN, type devmgmt.msc, and then click OK.

  Expand IDE ATA/ATAPI controllers.

  Right-click the controller you want to configure DMA/PIO settings for, and then click PROPERTIES.

  NEXT STEP IS TO NOT DISPLAY:

  Click the ADVANCED SETTINGS tab.

  In the TRANSFER MODE box, click ONLY PIO or DMA if AVAILABLE.

  It's the way in which Microsoft said's done it BUT not 4 & 5 are not available on my system.

  I am running XP Home version 5.1.2600 Service Pack 3 Build 2600

  Any other place I check for DMA?

  If you have the Intel Application Accelerator or Intel Matrix Storage Manager installed the DMA options are managed by the Intel software and they will not appear in the Device Manager.

  John