Setup for SCOM 2007 error

Similar Questions

• Security for the 2007 office suite update kb2288931 code 646 error could not update

  Windows tried to install the update kb2288931 security for the 2007 office suite

  Error code '0 x 80070646, ' '646', or '1606' when you try to install Office updates

  http://support.Microsoft.com/kb/2258121>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MSFix it 50461.msi.

• When you try to download sp3 for office 2007 I get 22% done then it freezes and comes up with the error 8007ee2. I tried all of the fixes recommended without result, ideas?

  When you try to download sp3 for office 2007 I get 22% done then it freezes and comes up with the error 8007ee2. I tried all of the fixes recommended without result, ideas? I am running Vista and office 2007. I tried all the Windows solutions but nothing works

  Hello Stephen,

  You happen to have another system that you can try to download the fixit on and then moving on a USB? You can also try this fixit as well: http://support.microsoft.com/kb/971058

• Fix for KB 2470478 Vista install-Setup has encountered an error: 0xc8000222

  original title: hotfix for KB 2470478 Vista will not install

  Hello

  I have a HP Pavilion Elite Notebook DV7t-1000 running Vista Home Premium SP2 with all updates installed. To replace my original factory now too small hard drive, I installed a Western Digital Scorpio Black 750 GB hard drive (model number WD7500BPKT). With the help of Acronis True Image Home 2011, I restored the original scores of my system disk (disk Local C: and D: HP_RECOVERY) factory on the new drive.

  The transfer of my system partition and recovery to the new drive more big seems to succeed. The system booted normally and my Office and Windows installations reported to be installed correctly. But when I checked Windows Update, the system reported that the service was not available and offered to restart. I restarted but still, the service reported that it was not available.

  I predicted that this behavior could happen and that he had prepared for her. In my research for the upgrade of my hard drive, I had learned that my new HDD is an 'Advanced Format drive"that uses a sector size of 4K rather than the traditional 512 K sector size. The Microsoft Knowledge Base contains several articles on this issue and the specific article for Windows Vista is 2470478 KB. Following the tips in this article, I waited until what the symptoms of a problem appeared until I tried to install the patch. Disabling the Windows Update service was one of the symptoms that I was looking for.

  The file from the hotfix associated with this Knowledge Base article is a .zip file only when it is extracted product a file called 'Windows6 '. 0-KB2470478-x 86.msu. However, when I try to run this file, I get the following error report: "Setup has encountered an error: 0xc8000222. I tried to turn off my antivirus Norton and restart the system, but all attempts to install this fix have the same error.

  Outside waiting for Microsoft to formalize this fix as an update (part of Vista SP3?) someone has suggestions to make the installation of this hotfix to succeed? While I did not check for other errors related to this problem, my situation of upgrading to the new drive convinced me that my problem is the one indicated in the Knowledge Base article. My original Esent.dll files are significantly older than those reported in the patches section. When I replaced the new drive with my original Windows Update drive normally.

  Outside of reboot or turn off the antivirus protection, someone has suggestions to work around the error to install 0xc8000222 in order to safely install the patch file (. Windows6 0-KB2470478-x 86.msu) for the Microsoft article 2470478 Knowledge Base?

  Thank you for your response.

  I followed the advice in this thread by adjusting to make it use the System Update Readiness Tool for Windows Vista (KB947821), rather than tool for Windows 7. When I tried to run the tool I met the same problem when I tried to install the hotfix: error installing 0xc8000222.

  Because I had the same problem to install the tool on to Windows Vista after I had moved the image of my old drive to the new drive, I saw two choices. See 1) file a journal report as suggested in the thread of Technet or 2) if I could install the hotfix on my original hard drive and then rebuild the disk image for installation on the new hard drive for Advanced formatting.

  After you set a system restore on my source drive point, I chose to install the patch and rebuild the disk image. For security reasons, I installed upgrading preparation system tool for Windows Vista (KB947821) beforehand. When I restored the image of the disk on my new advanced Format drive software seems behaves normally. Windows Update works now and Windows and Microsoft Office indicate that they are enabled. This solved my problem. I also notice a nice increase startup speed on my new drive system.

  The instructions on the fix should not use unless the problem appeared, that I interpreted to mean do not install it on the new Advanced Format HDD unless I saw a problem. However, once I saw the problem, I couldn't install this hotfix or any other Windows Update. Indeed the files included in the fix has featured several hardware drivers rather than standard system software.

  A problem with my approach, is that I had the luxury to regenerate my disk image after the installation of the hotfix. If one is obliged to restore a backup image to due to hardware failure, I don't believe that, after copying the disk image on one of these new Advanced Format drives, we could install the hotfix or the update of all other windows. The fix needs to be improved to the point that it is a standard part of Vista. I'm pretty sure that Microsoft is already planning to do.

  My system works, though if you think it would help, I could always point out my logs in a location of Skydrive for people of Technet.

• Exchange of audit for SCOM

  I need an SOP for the verification of the Configuration of Exchange 2010 logs in SCOM 2007 R2 and how to generate a report specifically for non-owner mailbox mailbox access.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum of Exchange 2010. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/Exchange2010/threads

• Update of MS for KB951550 KB951944 | Error code 646

  I did a search for updates, came through with the update of security for Microsoft Office 2007 (KB951550) ran the installation error code 646, manually attended the MS download, download ran and said: Version not found on the system. The result was the same for: update of security for Microsoft Office System 2007 (KB951944).

  For the 2007 Microsoft Office Suite Service Pack 2 (SP2), it failed in the automatic, downloaded manually update, said: already installed. So if it is already installed, why he shows in the 'need to update'?

  I had to do a total uninstall, then reinstall and download the updates manually. Thanks for your help.

• August 2012 patches for Office 2007 cannot install

  All patches from Microsoft for Office 2007 will not install with error 0x8024002d code. Patches are KB2596856, KB2687441, KB2596754, KB2596615 and KB2687400. PC is a Dell Optiplex gx270s running XP SP3. Installing Fixit has been applied repeatedly. The following message is generated in the temp directory when each install fails: the system cannot open the device or file specified.

  August security update XP installed successfully. Please indicate any solution. Thank you.

  Try to download and install it manually from here:

  August 2012 updated Office Release

  http://blogs.technet.com/b/office_sustained_engineering/archive/2012/08/14/August-2012-Office-update-release.aspx

• Updated for PowerPoint 2007 will not install. It indicates that the installation has been cancelled.

  Updated for PowerPoint 2007 wants to install. I have PowerPoint 2003 is NOT 2007.
  Why is-2007 tries to install?
  Why I can't stop the message from popping up update?
  I have Windows XP SP3
  There is no error message accompanying the absence of installation.
  According to the list in the history of the update - it indicates that the installation has been cancelled.

  There may be an update for Powerpoint that has been downloaded so that you can see the Powerpoints from Office 2007. Try to run for Office 2007 here http://support.microsoft.com/kb/928218 removal tool

• Setup has encountered an error: 0x8007000d

  From: shadow

  The last few times I have used my computer, Explorer has stopped working.  The last time I just hit ctrl alt delete and rebooted, but this last time automatically restarted Explorer. My computer tells me to download this repair "Windows6. 0-KB936316 - x 86"- so I did. When I tried to install this update, I received this message from the 'update to install stand-alone Windows"that says," Setup has encountered an error: 0x8007000d the data is not valid.

  I tried to search for this update on the microsoft.com site, but I don't have a solution to my problem. Was it bad idea to download this? Why my explore stop working?

  Thanks in advance for all the solutions that everyone is willing to take the time to write.

  From: Rick Rogers

  Reports on the problems and the Solutions Windows will prompt to download a hotfix, if one is known for a system error reported. In this case, the error seems to match the description here: http://support.microsoft.com/kb/936316

  The OP should attempt to download the hotfix directly from the article from the link above, it seems that that they may be damaged. Generally speaking, the causes include malware, programs to improve shell or plug-ins.

  --

  Good luck

  Rick Rogers, aka "crazy" - Microsoft MVP

  http://MVP.support.Microsoft.com/?ln=en-us

  Windows help - www.rickrogers.org

  My thoughts http://rick-mvp.blogspot.com

  Another response of the community of Windows Vista discussion groups

• Reference Dell Customer Integration pack for sccm 2007 sp2

  Hello

  I'm having trouble installing the integration of customer Dell for sccm 2007 sp2 Installer pack to install Custom ACtion.help and then gives the error 2147467261. Does anyone have any ideas on how to solve this problem.  Is the server a sccm 2007 ver 4 is installed on this windows 2008 R2 server

  Any help would be appreciated

  Has raced in mode compalty

• What is good JDev/SQLDev Setup for development/debugging extensions

  What are appropriate measures for JDeveloper to facility for developing/debugging Sql Developer extensions? Refer to a link from doc, if any.

  What specific combinations of Jdeveloper and Sql 4 developer + are supported?

  The combination that I use (see below) generates serious errors of 200 + during the definition of the 'target platform' of a new project of extension to my installation Sql Dev 4 +.

  1 the JDev and extension versions I use do support the version of Sql Developer as a target "platform in JDeveloper for building/test/debugging extensions?

  2. If it is not then "what specific combinations of JDev and Sql Dev are supported?

  3. If so, then maybe there's a bug in JDev or Sql Dev about the compliance OSGi or version reports.

  Already posted this in the Sql Developer forum.

  https://community.Oracle.com/thread/3544323

  Received a response from the Sql Dev PM but he did not address the issues and the specific problem because I already do what was suggested it:

  1. re: what is good JDev/SqlDev Setup for development/debugging extensions?

  

  Jeff Smith SQLDev PM April 8, 2014 03:23 (in response to rp0428)

  <: section >

  Currently being moderated

  Development of Extensions for Oracle JDeveloper 12 c (12.1.2) - summary

  http://www.Oracle.com/ocom/groups/public/@OTN/documents/WEBCONTENT/131167.XML#Oracle.JDeveloper.esdk

  You'll want this SDK

  12.1.2.0.40.66.68

  Oracle.JDeveloper (min = 12.1.2.0.40.66.68 , max = 12.1.2.0.40.66.68 )

  The goal is to be able to set breakpoints and debug normal while the development and test of extensions for sql developer. Can I use JDeveloper to compile/deploy a jar extension can run sql developer and install it, but this isn't an effective way to create/test/debugging code.

  1. os - Windows XP SP3

  2 Sql Developer 32 bit - Version 4.0.0.13

  Build a HAND - 13.80

  3 JDeveloper 32 bit - Build JDEVADF_12.1.2.0.0_GENERIC_130608.2330.6668

  ((4 JDeveloper downloaded installed using: a) jdev_suite_121200_win32.exe, b).

  esdk_bundle_12.1.2.0.40.66.68.zip

  5 has created a new extension project

  6 tried to affect 'Platform target' sql developer
  a. - manage - the-platform target project properties add sql developer

  More than 200 serious mistakes (see the other thread for samples):

  a. the major part have been associated to ' orai18n - collation.jar'

  b. a half - doze or so "system property jdbc.library.

  3. a "system property xdb.library.

  4. two to "Unable to parse clear jar of extension.

  I would expect JDeveloper to check the "target platform' for OSGi compatibility and version before trying to import it as a"target platform.

  Same bug exists when you use the last Sql Developer version 4.0.1.14.48 as the target platform.

  Jeff Smith, Sql Dev PM, responded in this way in the thread I posted in this forum:

  And a bigger problem is that you use JDev12.1.2? B/c SQL Dev 4 is built on the top of 12.1.3

  12.1.3 JDeveloper has NOT been made public that I can find.

  Q - JDeveloper 12.1.2 does support using Sql Developer as a target "platform for an extension on 32-bit Windows project?

  ----------------

  -Updated 19:43 by rp0428

  ----------------

  John McGinnis has been authorized to provide the definitive answer from the point of view Sql Developer Team in this forum:

  JDeveloper provides a design environment for the creation of new extensions. However, this environment designtime is created by and maintained by the team of JDeveloper. SQL Developer team has limited entry in there and we don't have any control over the target "SQL Developer" it provides. Unfortunately, JDeveloper 12.1.2 is the latest version of JDeveloper which is offered to the customers, and there are several significant changes to the configuration of products between 12.1.2 and 12.1.3 which affect the extensions. There is no version of the developer SQL which was delivered using JDeveloper 12.1.2 then the target of "SQL Developer" for extensions in JDeveloper 12.1.2 doesn't really work for the creation of significant extensions.

  Just a heads up to the JDeveloper team who can run through this thread.

  As part of the public release of JDeveloper 12.1.3 I hope there will be some sort of statement of support using Sql Developer as a target "platform for developing extensions.

  I will definitely test this version when it is released and will transfer at this time, if there are problems.

  I'm marking this question ANSWER because since then, based on the response of Johns, I'm not sure that any other 'official' answer can be given for the moment.

  But the comments or additions would be more than welcome.

• I'm trying to update to CC (2014) and get this message: 'failed to install. Setup has encountered an error. Restart your system and try again. (15) I did the reboot, the same problem.

  I'm trying to update to CC (2014) and get this message: 'failed to install. Setup has encountered an error. Restart your system and try again. (15) I did the reboot, the same problem.

  Help!

  I solved this problem by replacing the applications folder and the Adobe folder in the library - folder of Application support with the files from before the last update of Mavericks using Time machine.

  It worked for me.

• Cannot create excel object for Excel 2007/Windows 7

  Hello everyone,
  The code below works fine for Excel 2003 / Windows XP/IE6 but does not work for Excel 2007/Windows 7/IE8.
  
  *********************
  application: = Client_OLE2. CREATE_OBJ ('Excel.Application');
  
  Client_OLE2. SET_PROPERTY (application, 'Visible', 'TRUE');
  
  workbooks: = Client_OLE2. Get_Obj_Property (application "Filing cabinets");
  
  args1: = Client_OLE2.create_arglist;
  ************************
  
  There is no error when running the form, debug, we found that the control ignores all of the code above.
  
  I use Oracle forms 10.1.2.3 and jre 1.6.0_16.
  
  Would appreciate your help in providing a solution for the above question.
  
  Thank you
  Anbu

  I recommend you try the following in the order I listed the.

  1 disable UAC. See here: http://windows.microsoft.com/en-US/windows-vista/Turn-User-Account-Control-on-or-off

  2. Add a SYNCHRONIZATION; After your first line of code (that you provided in the post - I guess that's all that)

  application := Client_OLE2.CREATE_OBJ('Excel.Application');
  SYNCHRONIZE;
  

  3 uninstall JRE 1.6.0_16 and reconfigure for use with the last one which is 1.6.0_21

  4. install the patch 9282569forms. This hotfix requires that you upgrade to Jacob to version 1.10.1. It will also take that you generate a new webutil.plx (new webutil.pll is included in the patch). Read the patch readme carefully before installing.

  Note that more recent versions of MS Office like '2007' have not been tested with 10.1.2 and webutil Forms, so it may not work properly if MS made changes to the structure of COM in their products.

• What is the configuration of the maximum ram for a 2007 iMac 21,5 "

  What is the configuration of the maximum ram for a 2007 iMac 21,5 "

  There is no such thing as a 2007 21.5-inch iMac; the 2007 iMac is all 20 or 24 inches. Click here and search for your model; the page it will say.

  (141476)

• Satellite A500 - cannot find the product key for Office 2007

  Hi all

  I just got a Satellite A500 and can t find the key for office 2007 trial version, accompanying any ideas that can help would be very appreciated

  Hello

  As I remember, when you start Microsoft Office will ask to activate or to get the trial key for 3 months. You must show your email and something else... and you will evaluate it for 3 months.