Updated for PowerPoint 2007 will not install. It indicates that the installation has been cancelled.
Updated for PowerPoint 2007 wants to install. I have PowerPoint 2003 is NOT 2007.
Why is-2007 tries to install?
Why I can't stop the message from popping up update?
I have Windows XP SP3
There is no error message accompanying the absence of installation.
According to the list in the history of the update - it indicates that the installation has been cancelled.
There may be an update for Powerpoint that has been downloaded so that you can see the Powerpoints from Office 2007. Try to run for Office 2007 here http://support.microsoft.com/kb/928218 removal tool
Tags: Windows
Similar Questions
-
I tried to install an update for CS6, but every time he tells me that the installation failed due to the error um44m2p7 help please!
Refer
-
I download upgrade assets 13, items 9, 2 files to download, after that 1 of the 2 loaded 2nd file will not download message indicates that the part of the Archives of photoshop 13 is missing. you need all parts in the same folder. What should do?
You can also try to download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html
-
Windows Update for powerpoint viewer wil not install - error code 0 x 4397
I tried several times to install this update without success. Also tried the Microsoft Fixit for Windows Update, but it has not fixed the problem.
The update is
Security for PowerPoint Viewer 2003 (KB969615) update
Any suggestions?It will probably not install because most likely the update is looking for the original source.
As this is a security for the 2003 Viewer update, why not get rid of it all together and download the new version-
-
Whenever I try to install firefox on my laptop, I get a message saying that the installation was interrupted. I use windows 7.
Try the full installer...
-
Updates to security for Office 2007 will not install
OK - I have WIndows 7 Home 64 bit, installed office 2007 and the seucutiy updates will not be installed. I use AVG antiv virus as well as the windows firewall. I tried to install updates of security with both of them is off, does not.
Runs an e8400 intell with 4 GB of ram and 3 hardrives this memory and processing speed are not the issue - of ideas?Hi Tagos40,
Welcome to the Microsoft Answers site!
Update you are trying to install?
You get no matter what error code or message when you try to install the update?
You will need to maybe reset the Windows Update components, download the Microsoft fix - it from the link and run the wizard that automatically resets the windows update components, if it does not, I recommend that reset you manually update windows components from the link: http://support.microsoft.com/kb/971058
This should solve the problem, after the execution of the audit of the tool if you are able to perform updates.
If the problem persists try to install the update manually after you download it from the Microsoft site. You can use your favorite search engine and search for the article using the number of the update and download it and install it later.
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
restart resolves the problem, then it repeats very soon
Hello1. when the question is is produced?Follow the steps below and check if that helps.Step 1:I would say you click on "fix it" link for automated troubleshooting and fixing the issue below. If the "fix it" does not work, follow the steps manually.
http://support.Microsoft.com/kb/929461
Step 2:
You can remove and reinstall the existing drivers. To do this, follow these steps:a. Click Start and then click Control Panel.b. click System and security, click System and then click on Device Manager.Note that if control panel is in Classic view, double-click System and then click on Device Manager.If you are prompted for an administrator password or a confirmation, type the password, or click on allow.(c) in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.d. When you are prompted to confirm that you want to remove the device, click OK.e. restart the computer.After the computer restarts, the drivers will be installed automatically.Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!
=================================
Preparation of control system was updated.
Binary version 6.0.6002.22202
Package Version 6.0
2009-10-24 12:36Checking Windows Service Packages
Checking of manifests package and catalogs
Checking package Watchlist
Watchlist checking
Checking packages
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mumControl components store
Summary:
Seconds executed: 1241
Found 4 errors
CBS MUM lack count: 4Unavailable repair files:
servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.catHello Yiratr,
Thank you for using the Microsoft answers Forums.
Solution:
Follow the steps in the web link below.
http://support.Microsoft.com/kb/956702
That should do the trick for you.
Thank you.
Kind regards
Augustine.
"URGO".
UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO
-
Fault of updated for Powerpoint 2007
I have a question where Windows update guard trying to install an update for Powerpoint 2007 and failing. It is a failure because the app no longer exists. I think it was just bad timing that the update came through right all the time, that the app has been uninstalled. I tried the 'hide' but it is up to each reboot. I tried to delete the folder %WINDIR%\SoftwareDistribution\Download on the advice of some forum and thought that made the turn but nope.
Thank you!
Hello
Thanks for posting your query on the Microsoft Community.
According to the description of the problem, it seems that you can not install the update for Powerpoint 2007 , this problem may occur if one or more of the following conditions are met:
- The Windows Update database is damaged.
- Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
- Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
- A required system file is incorrectly registered.
If it helps, try the methods and check them off below.
Method 1
If I'm wrong, you tried not Troubleshooting Windows Update below to solve your problem and if this isn't the same link, then try to run the troubleshooter.
Open the Windows Update troubleshooting tool
http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Update-Troubleshooter
Method 2
Step 1
If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways
Step 2
Try to follow the steps in the Microsoft Article and check if it helps.
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7
Method 3
If after completing the two steps issue persists trying to follow the steps described in the following Microsoft article different methods.
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/
Important:
Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
I hope this helps. If the problem still persists, post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Kind regards
-
I have LR 6 (upgrade LR 5and4) installed on Windows PC and switch to Mac. It will not install on Mac since the earlier version is installed. Is there a solution?
Update should allow you to enter the serial number of the previous version during the installation
If this does not work, you must communicate directly with Adobe
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
-
OK, Windows Vista. Try to uninstall unused programs, (SimsLife) and met with the message: "the installation source for this product is not available. Verify that the source exists and that you can access. I'm trying to UNINSTALL a product that exists. How to find the source in order to uninstall the program?
Hello
Sometimes when you uninstall programs it may be other applications of the dependent files. Some programs will leave them behind and others will take all during the uninstallation.
Troubleshoot installing or uninstalling programs
http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs
Download the free version of CCleaner and use the uninstaller to uninstall the application
-
I'm trying to scan a doc and the message is 'not found computer. Ensure that the HPsoftware has been installed on the computer. My computer print very well so I do not know why it does not scan.
Hello
Thanks for the information. Two things to try. First of all, try to align your print cartridges using the controls on the printer display panel. As part of this process, the printer will print on a sheet of alignment that you place on the printer and scan in the printer. See if it works successfully. If not, see the following page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02451000&cc=us&dlc=en&lc=en&jumpid=reg_r1002_usen_c-001_title_r0011 .
The second thing to try is the print and Scan Doctor Utility, download here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-114642-1&cc=us&dlc=en&lc=en&os=4063&product=5061082&sw_lang=. Its a standalone process and requires no explanation.
Let me know if one of them fixes the problem.
Kind regards
BearPup
-
Printe will not print. Says that 'the printer door is open', but no door is open
Printe will not print. Says that 'the printer door is open', but no door is open
Hi ElliotBrahms,
1. What is the brand and model of the printer?
2. what operating system is installed on the computer?
3. you have made no changes to the computer before the broadcast took place?
4. when exactly you get this error message?
5. What is the exact error message you get?Method 1
Try the steps from the following link:Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Method 2
Try the steps from the following link:
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems -
I can't remove Silverlight.
I want to update to Silverlight. When I try to download, the download fails and I get a message to uninstall the old version. When I try to do, I get a message that says "the installation source for this product is not available. Varify that the source exists and that you can access. »
I have been in this situation and tried the solution here:
"How to manually clean a broken Silverlight installation.
Who has not completely worked for me, however, if I pulled upward from Regedit
(Start-> Run-> 'Regedit')
and searched the whole registry "Silverlight", deleting keys of parenthood which contain this string. (There was a large number of them). When I did, I was finally able to reinstall Silverlight.Note that editing the registry is dangerous, so make sure that you first create a backup of the registry and know how to restore it in case things go very wrong.
"How do back up and restore the registry in Windows XP"
<>http://support.Microsoft.com/kb/322756 >HTH,
JW -
you just bought LR6 DVD that I tried to install Adobe says that the installation is not possible because I am running Vista, even if I run Win7 Home Premium on my computer. Any ideas how to solve this problem?
Right click on the file Setup.exe and choose Properties option.
Then click on the Compatibility tab.
The value of the Windows 7 operating system and check.
See the link below:
Maybe you are looking for
-
Obsolete photos uses Facebook connect
I changed my address email Facebook years ago, before the existence of Photos as a desktop application. When I try to share on Facebook through Photos, he shoots p this obsolete email as my Facebook login. I deleted the keychain entry, Photos plist f
-
I am running Firefox Version 17.0.1, yet it is falsely identifying himself as "Mozilla/5.0 (Windows NT 6.1;". RV:6.0) Gecko/20100101 Firefox/6.0 "thus causing difficulties of bug - as in the"deviantART" http://layaboutjoe.deviantart.com/ and is even
-
Re: Satellite Pro L10 - display driver for Win7RC
Hi- Were able to successfully install Windows 7RC on the L10. There is a missing video card driver and I can't seem to find it on the download site (XP drivers seem compatible with Win7 because of its XP mode). Apparently, this has something to do wi
-
How to turn on Satellite A100-847 Intel virtualization technology?
Is it possible to activate on A100-847 Intel virtualization technology?I try to run the VMWare Server to host the 64 bit OS, but it tells me that the VT CPU (T7200) capable but VT is not enabled.Is there a reason not to enable this feature of process
-
Original title: Guy answer please! I have an error of one at the time of startup xp service Pack 2. "After a few seconds xp loaded and then a"loading..."message » »then«We strive to update a password... the current password is error «restart then aut