Setup Oracle 12 c error

Similar Questions

• Setup has encountered an error: 0x8007000d

  From: shadow

  The last few times I have used my computer, Explorer has stopped working.  The last time I just hit ctrl alt delete and rebooted, but this last time automatically restarted Explorer. My computer tells me to download this repair "Windows6. 0-KB936316 - x 86"- so I did. When I tried to install this update, I received this message from the 'update to install stand-alone Windows"that says," Setup has encountered an error: 0x8007000d the data is not valid.

  I tried to search for this update on the microsoft.com site, but I don't have a solution to my problem. Was it bad idea to download this? Why my explore stop working?

  Thanks in advance for all the solutions that everyone is willing to take the time to write.

  From: Rick Rogers

  Reports on the problems and the Solutions Windows will prompt to download a hotfix, if one is known for a system error reported. In this case, the error seems to match the description here: http://support.microsoft.com/kb/936316

  The OP should attempt to download the hotfix directly from the article from the link above, it seems that that they may be damaged. Generally speaking, the causes include malware, programs to improve shell or plug-ins.

  --

  Good luck

  Rick Rogers, aka "crazy" - Microsoft MVP

  http://MVP.support.Microsoft.com/?ln=en-us

  Windows help - www.rickrogers.org

  My thoughts http://rick-mvp.blogspot.com

  Another response of the community of Windows Vista discussion groups

• Fix for KB 2470478 Vista install-Setup has encountered an error: 0xc8000222

  original title: hotfix for KB 2470478 Vista will not install

  Hello

  I have a HP Pavilion Elite Notebook DV7t-1000 running Vista Home Premium SP2 with all updates installed. To replace my original factory now too small hard drive, I installed a Western Digital Scorpio Black 750 GB hard drive (model number WD7500BPKT). With the help of Acronis True Image Home 2011, I restored the original scores of my system disk (disk Local C: and D: HP_RECOVERY) factory on the new drive.

  The transfer of my system partition and recovery to the new drive more big seems to succeed. The system booted normally and my Office and Windows installations reported to be installed correctly. But when I checked Windows Update, the system reported that the service was not available and offered to restart. I restarted but still, the service reported that it was not available.

  I predicted that this behavior could happen and that he had prepared for her. In my research for the upgrade of my hard drive, I had learned that my new HDD is an 'Advanced Format drive"that uses a sector size of 4K rather than the traditional 512 K sector size. The Microsoft Knowledge Base contains several articles on this issue and the specific article for Windows Vista is 2470478 KB. Following the tips in this article, I waited until what the symptoms of a problem appeared until I tried to install the patch. Disabling the Windows Update service was one of the symptoms that I was looking for.

  The file from the hotfix associated with this Knowledge Base article is a .zip file only when it is extracted product a file called 'Windows6 '. 0-KB2470478-x 86.msu. However, when I try to run this file, I get the following error report: "Setup has encountered an error: 0xc8000222. I tried to turn off my antivirus Norton and restart the system, but all attempts to install this fix have the same error.

  Outside waiting for Microsoft to formalize this fix as an update (part of Vista SP3?) someone has suggestions to make the installation of this hotfix to succeed? While I did not check for other errors related to this problem, my situation of upgrading to the new drive convinced me that my problem is the one indicated in the Knowledge Base article. My original Esent.dll files are significantly older than those reported in the patches section. When I replaced the new drive with my original Windows Update drive normally.

  Outside of reboot or turn off the antivirus protection, someone has suggestions to work around the error to install 0xc8000222 in order to safely install the patch file (. Windows6 0-KB2470478-x 86.msu) for the Microsoft article 2470478 Knowledge Base?

  Thank you for your response.

  I followed the advice in this thread by adjusting to make it use the System Update Readiness Tool for Windows Vista (KB947821), rather than tool for Windows 7. When I tried to run the tool I met the same problem when I tried to install the hotfix: error installing 0xc8000222.

  Because I had the same problem to install the tool on to Windows Vista after I had moved the image of my old drive to the new drive, I saw two choices. See 1) file a journal report as suggested in the thread of Technet or 2) if I could install the hotfix on my original hard drive and then rebuild the disk image for installation on the new hard drive for Advanced formatting.

  After you set a system restore on my source drive point, I chose to install the patch and rebuild the disk image. For security reasons, I installed upgrading preparation system tool for Windows Vista (KB947821) beforehand. When I restored the image of the disk on my new advanced Format drive software seems behaves normally. Windows Update works now and Windows and Microsoft Office indicate that they are enabled. This solved my problem. I also notice a nice increase startup speed on my new drive system.

  The instructions on the fix should not use unless the problem appeared, that I interpreted to mean do not install it on the new Advanced Format HDD unless I saw a problem. However, once I saw the problem, I couldn't install this hotfix or any other Windows Update. Indeed the files included in the fix has featured several hardware drivers rather than standard system software.

  A problem with my approach, is that I had the luxury to regenerate my disk image after the installation of the hotfix. If one is obliged to restore a backup image to due to hardware failure, I don't believe that, after copying the disk image on one of these new Advanced Format drives, we could install the hotfix or the update of all other windows. The fix needs to be improved to the point that it is a standard part of Vista. I'm pretty sure that Microsoft is already planning to do.

  My system works, though if you think it would help, I could always point out my logs in a location of Skydrive for people of Technet.

• Windows6. 1 KB958559 - x 64 - RefreshPkg.msu and all I get is a warning to stop. It says "Setup has encountered an error: 0 x 80070003".

  I try to install Windows6. 1 KB958559 - x 64 - RefreshPkg.msu and all I get is a warning to stop. It says "Setup has encountered an error: 0 x 80070003". It is Win 7 Pro 64 bit SP1. What should I do?

  Hi Oliver Sedlacek,.

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Run the Windows Update troubleshooting tool.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Put the computer in a clean boot State before proceeding with the update of windows.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Try to manually install updates (issues KB) by downloading from the link provided.

  http://www.Microsoft.com/downloads/en/default.aspx

  Download the good update depending on your version of operating system (OS) (32-bit or 64-bit).

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

• I want to install a program, but when I run the setup I have this error displays "an error (-5006: 0x8000ffff) occurred while runnig the Setup program."

  original title: Setup error.

  I want to install a program, but when I run the setup I have this error displays "an error (-5006: 0x8000ffff) occurred while runnig the Setup program."

  Please make sure you have finished any previous Setup and closed other applications. If the error persists, please contact your dealer.

  I solve the problem... All the error is the file. I don't know but he corrupted and I deleted it.

  I have download it again and the problem was solved. Thanks to you all.

• ORA-28547: connection to the server has failed, probable Oracle Net admin error

  Hello

  Environment

  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  

  I'm ORA-28547: failed to connect to the server, probable Oracle Net admin error when connecting to the database as username/password@orcl,If, I do not @orcl it connects without any problems. But I can't connect from client machines without dbstring.

  This problem started recently, and I understand that it is because of the dynamic ip of the linux machine. Previously the Linux m/c ip was 172.25.210.177 unfortunately was launched once the machine ip has changed in 172.25.210.148.

  To bring the database up I started as usual and got to the top, but when connecting db with the above error is being username/password@orcl.

  To solve the i changed the ip address in tnsnames.ora and listener.ora but no luck. Please advice how to solve.

  It will run until the next change of the ip address. If you want a permanent solution, you must assign a static ip address. Why is your dynamic ip address? What is a local testbox.foobar.com or a production system that must be accessible to other systems?

• MSSQL Server 2000 to Oracle 11 g: error on the Migration repository linking

  Hello! I'm currently migrating a MS SQL Server 2000 database to Oracle 11 g. With the help of:

  SQL Developer Version 4.0.2.15 Build 15.21

  JDK1.7.0_65

  I sysad account in MS SQL Server 2000, but have limited the privilege with Oracle 11 g as we have another group of TI that govern. Reading the documentation of migration said in the tutorial of migration of a database server Microsoft SQL to Oracle Database 11 g, I asked our IT to create the user using the following script:

  CREATING USER MWREP
  IDENTIFIED BY mwrep
  DEFAULT TABLESPACE MWREP_DATA
  TEMPORARY TABLESPACE TEMP;

  GRANT CONNECT, RESOURCE, CREATE SESSION, SEE at MWREP;

  Using the user defined MWREP, I tried to create the migration repository using SQL Developer, but it returned an error:

  SQL error on executing the Script

  Try to delete the repository before the creation of repository

  I tried to delete the repository, but he returned a denunciation of the question:

  Removal of the migration repository is completed, however, there was a problem with the deletion.  There may be several reasons for this. (1) the connection is not open.  (2) the repository has been damaged.  (3) there was no repository in this regard.  Db objects have not been deleted. The saved connection has been removed from the migration repository list

  Reading further, I came across these topics: How to remove a directory, How to associate Migration repository when using the tooland https://blogs.oracle.com/OCP10to11/entry/sqldeveloper_try_deleting_repoand learns that it is caused by a limited tablespace. Given that our IT run the following script to change the user MWREP:

  ALTER USER MWREP QUOTA UNLIMITED ON MWREP_DATA;

  But I still encounter the same error than repository migration association. Do I need a sysad privilege to continue with the association? (The generated code will run in by IT after conversion and translation). Do not change the quota of the user on the tablespace not yet enough?

  Any help is appreciated. Thank you in advance!

  Post edited by: changes GreenApple101 20140818 GMT + 08: 1. subject of ' SQL Developer: error on Association of Migration guard "" MSSQL Server 2000 for Oracle 11 g: error on Association of Migration repository "2. Some corrections of grammar

  Hi all! Tried to use a lower version of SQL Developer (Version 3.2.20.09 build HAND-09, 87), and I have successfully bound to the migration repository.

• ORA-28547: connection to the server failed, probable Oracle Net admin error.

  Dear all,

  My11gR2 database on windows 2008 R2 Standard is in error "ORA-28547: connection to the server failed, probable Oracle Net admin error.

  It's when I try to log on to the server itself

  as:

  SQL * more: Production of release 11.2.0.1.0 kills him Oct 8 05:43:03 2013

  Copyright (c) 1982, 2010, Oracle.  All rights reserved.

  Enter the user name: sys/***@orcl as sysdba

  "ORA-28547: failed to connect to the server, likely admin error Oracle Net.

  This started happening when the server has been restarted. I don't know if I have to stop any service, as in some cases under Linux should be stopped service iptables.

  The solution I found on most of the forums is to change in sqlnet.ora since '#SQLNET. AUTHENTICATION_SERVICES = (NTS) 'to' #SQLNET. AUTHENTICATION_SERVICES = (NONE)"and restart the receiver.

  But even if it doesn't in my case.

  Kindly help.

  Best regards, Imran

  Guys, there are 2 databases installed on the same server, to correctly configure the SID. Once set, I could see that the database is down and when starting it started working well.

  Thanks for your efforts.

• Customizing operations Oracle Access Manager error page.

  Hello

  If someone let me know if we can customize the below page "Oracle Access Manager operations Error"?

  --

  Operation Oracle Access Manager error

  The plugin WebGate is unable to communicate with servers of access.

  Contact your site administrator to address this issue

  ---

  Thanks in advance,

  PS

  Hello

  You can change the webgate.xml to achieve this. For more information, visit our 555137.1 .

  Kind regards

  Colin

• I'm trying to update to CC (2014) and get this message: 'failed to install. Setup has encountered an error. Restart your system and try again. (15) I did the reboot, the same problem.

  I'm trying to update to CC (2014) and get this message: 'failed to install. Setup has encountered an error. Restart your system and try again. (15) I did the reboot, the same problem.

  Help!

  I solved this problem by replacing the applications folder and the Adobe folder in the library - folder of Application support with the files from before the last update of Mavericks using Time machine.

  It worked for me.

• Oracle 9i install error on configuration help

  version of the operating system: solaris 10
  physical memory: 512 M
  shared memory: 256 M (set shmsys:shminfo_shmmax = 256000000)
  
  error occurred in parts of oracle configuration assistance.
  
  error:
  ORA-00443: "PMON" background process is not started
  ORA-27300: os operating system dependent: fork failed with status: 0
  ORA-27301: message: failed operating system error 0
  ORA-27302: an error occurred at: skgpspawn5
  
  I don't know where is hurts.
  Please solve it.

  Salvation;

  Check your double post:
  Re: error installing oracle 9i

  PS: Please change your thread to answer, and keep this thread updated

  Respect of
  HELIOS

• java.sql.SQLException: [BEA] [Oracle JDBC Driver] Error establishing socket t

  I note the following exceptions in newspapers
  
  < 18 April 2010 3:40:28 AM PDT > < error > < RJVM > < BEA-000515 > < run failed
  weblogic.socket.SocketOptionException: too many open files
  weblogic.socket.SocketOptionException: too many open files
  at weblogic.socket.SocketMuxer.initSocket(SocketMuxer.java:431)
  at weblogic.socket.SocketMuxer.newSocket(SocketMuxer.java:310)
  at weblogic.socket.ChannelSocketFactory.createSocket(ChannelSocketFactory.java:82)
  at weblogic.socket.ChannelSocketFactory.createSocket(ChannelSocketFactory.java:58)
  at weblogic.net.http.HttpClient.openServer(HttpClient.java:355)
  at weblogic.net.http.HttpClient.openServer(HttpClient.java:434)
  to weblogic.net.http.HttpClient. < init > (HttpClient.java:159)
  to weblogic.net.http.HttpClient. < init > (HttpClient.java:149)
  at weblogic.net.http.HttpURLConnection.getHttpClient(HttpURLConnection.java:190)
  at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:414)
  at weblogic.rjvm.http.HTTPClientJVMConnection.receiveAndDispatch(HTTPClientJVMConnection.java:404)
  at weblogic.rjvm.http.HTTPClientJVMConnection.run(HTTPClientJVMConnection.java:295)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:464)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
  >
  # < 18 April 2010 3:40:28 AM PDT > < error > < RJVM > < ddcaxpsmo05 > < OrdZone1Managed01 > < ExecuteThread [ASSET]: '24' to queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1271587228648 > < BEA-000515 > < run failed
  weblogic.socket.SocketOptionException: too many open files
  weblogic.socket.SocketOptionException: too many open files
  at weblogic.socket.SocketMuxer.initSocket(SocketMuxer.java:431)
  at weblogic.socket.SocketMuxer.newSocket(SocketMuxer.java:310)
  at weblogic.socket.ChannelSocketFactory.createSocket(ChannelSocketFactory.java:82)
  at weblogic.socket.ChannelSocketFactory.createSocket(ChannelSocketFactory.java:58)
  at weblogic.net.http.HttpClient.openServer(HttpClient.java:355)
  at weblogic.net.http.HttpClient.openServer(HttpClient.java:434)
  to weblogic.net.http.HttpClient. < init > (HttpClient.java:159)
  to weblogic.net.http.HttpClient. < init > (HttpClient.java:149)
  at weblogic.net.http.HttpURLConnection.getHttpClient(HttpURLConnection.java:190)
  at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:414)
  at weblogic.rjvm.http.HTTPClientJVMConnection.receiveAndDispatch(HTTPClientJVMConnection.java:404)
  at weblogic.rjvm.http.HTTPClientJVMConnection.run(HTTPClientJVMConnection.java:295)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:464)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
  
  ====================================================================================================================
  # < 18 April 2010 3:40:22 AM PDT > < Info > < JDBC > < ddcaxpsmo05 > < OrdZone1Managed01 > < ExecuteThread [ASSET]: '21' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1271587222852 > < BEA-001156 > < associated to 001129 following message from stack trace:
  
  java.sql.SQLException: [BEA] [Oracle JDBC Driver] Error establishing socket to host and port: smoprna.mckesson.com:1521. Reason: Too many open files
  at weblogic.jdbc.base.BaseExceptions.createException (unknown Source)
  at weblogic.jdbc.base.BaseExceptions.getException (unknown Source)
  at weblogic.jdbc.oracle.OracleImplConnection.makeConnectionHelper (unknown Source)
  at weblogic.jdbc.oracle.OracleImplConnection.makeConnection (unknown Source)
  at weblogic.jdbc.oracle.OracleImplConnection.connectAndAuthenticate (unknown Source)
  at weblogic.jdbc.oracle.OracleImplConnection.open (unknown Source)
  at weblogic.jdbc.base.BaseConnection.connect (unknown Source)
  at weblogic.jdbc.base.BaseConnection.setupImplConnection (unknown Source)
  at weblogic.jdbc.base.BaseConnection.open (unknown Source)
  at weblogic.jdbc.base.BaseDriver.connect (unknown Source)
  at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:299)
  at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:200)
  at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1073)
  to weblogic.common.resourcepool.ResourcePoolImpl$ ResourcePoolMaintanenceTask.timerExpired (ResourcePoolImpl.java:2209)
  at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:464)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
  ======================================================================================
  
  Designated operational entities the above exception occurs when the database is unavailable and weblogic attempts to create the connection to the database using the file descriptors in turn that is causing the files too many error messages.
  
  Please feel free to correct me.
  
  Thanmks in advance :)

  It occurs when the database is completely down.
  But it could happen if the database is blocked and you try to create a large number of connections.
  Watch this forum for more information on too many files open.
  Re: Exception too many open files

• Setup Oracle Outlook Email integration On Demand error: register number

  Good day to all-
  
  Hoping that someone has encountered this problem before and it is aware of a solution - I have a user who is unable to install the Oracle Outlook Email integration On Demand for Outlook plug.
  
  Outlook does not run when the installation is done, but a "Severe" pop-up error when installing that says: "Setup could not write all the necessary registry entries. The installation will be interrupted! »
  
  Always see the same problem after a reboot and no other users have a problem installing it - any who have ideas and/or registry entires Setup trying to touch?
  
  Thank you!

  Hello

  The user have administrator rights on their machines? Registry for OEI entries please write to the following:

  HKEY_LOCAL_MACHINE > SOFTWARE > Windows > uninstall > Oracle Outlook Email integration on demand
  HKEY_LOCAL_USER > software > Siebel CRM On Demand > Email Outlook of Siebel On Demand integration
  HKEY_LOCAL_USERS > software > Siebel CRM On Demand > Email Outlook of Siebel On Demand integration

  Thank you
  Sean

• Setup Oracle error

  HIII,

  I try to install oracle 11g db on my oel6 os.

  but on the due diligence an error indicating the 3 packages have not been installed shows they are unix ODBC - 2.2.11 and unix-devel-ODBC - 2.2.11 and pdksh5.2.14.

  I tried to install packages using yum install valid oracle.

  but it shows

  Loaded modules: refresh-packagekit, security

  Setting up installation

  No package is validated by oracle available.

  Error: Nothing to do

  -----------------

  When I do: cat etc/yum.repos.d/public-yum-ol6.repo. I get

  [public_ol6_latest]
  name = Oracle Linux $releasever Latest ($basearch)
  baseurl = http://public-yum.oracle.com/repo/OracleLinux/OL6/latest/ $basearch /
  gpgkey = http://public-yum.Oracle.com/RPM-GPG-key-Oracle-OL6
  gpgcheck = 1
  Enabled = 1

  [public_ol6_ga_base]
  name = copy media installation Oracle Linux $releasever GA ($basearch)
  baseurl = http://public-yum.oracle.com/repo/OracleLinux/OL6/0/base/ $basearch /
  gpgkey = http://public-yum.Oracle.com/RPM-GPG-key-Oracle-OL6
  gpgcheck = 1
  enabled = 0

  [public_ol6_u1_base]
  name = Oracle Linux $releasever Update 1 installation copy media ($basearch)
  baseurl = http://public-yum.oracle.com/repo/OracleLinux/OL6/1/base/ $basearch /
  gpgkey = http://public-yum.Oracle.com/RPM-GPG-key-Oracle-OL6
  gpgcheck = 1
  enabled = 0

  [public_ol6_u2_base]
  name = Oracle Linux $releasever Update 2 installation copy media ($basearch)
  baseurl = http://public-yum.oracle.com/repo/OracleLinux/OL6/2/base/ $basearch /
  gpgkey = http://public-yum.Oracle.com/RPM-GPG-key-Oracle-OL6
  gpgcheck = 1
  enabled = 0

  [public_ol6_u3_base]
  name = Oracle Linux $releasever copy media installation Update 3 ($basearch)
  baseurl = http://public-yum.oracle.com/repo/OracleLinux/OL6/3/base/ $basearch /
  gpgkey = http://public-yum.Oracle.com/RPM-GPG-key-Oracle-OL6
  gpgcheck = 1
  enabled = 0

  [public_ol6_u4_base]
  name = Oracle Linux $releasever Update 4 installation copy media ($basearch)
  baseurl = http://public-yum.oracle.com/repo/OracleLinux/OL6/4/base/ $basearch /
  gpgkey = http://public-yum.Oracle.com/RPM-GPG-key-Oracle-OL6
  gpgcheck = 1
  enabled = 0

  [public_ol6_u5_base]
  name = Oracle Linux copy media update installation 5 ($basearch) $releasever
  baseurl = http://public-yum.oracle.com/repo/OracleLinux/OL6/5/base/ $basearch /
  gpgkey = http://public-yum.Oracle.com/RPM-GPG-key-Oracle-OL6
  gpgcheck = 1
  enabled = 0

  [public_ol6_UEK_latest]
  name = last Unbreakable Enterprise Kernel for Oracle Linux $releasever ($basearch)
  baseurl = http://public-yum.oracle.com/repo/OracleLinux/OL6/UEK/latest/ $basearch /
  gpgkey = http://public-yum.Oracle.com/RPM-GPG-key-Oracle-OL6
  gpgcheck = 1
  enabled = $uek

  [public_ol6_UEKR3_latest]
  name = Unbreakable Enterprise Kernel version 3 for Oracle Linux $releasever ($basearch)
  baseurl = http://public-yum.oracle.com/repo/OracleLinux/OL6/UEKR3/latest/ $basearch /
  gpgkey = http://public-yum.Oracle.com/RPM-GPG-key-Oracle-OL6
  gpgcheck = 1
  enabled = $uekr3

  [public_ol6_UEK_base]
  name = Unbreakable Enterprise Kernel for Oracle Linux $releasever ($basearch)
  baseurl = http://public-yum.oracle.com/repo/OracleLinux/OL6/UEK/base/ $basearch /
  gpgkey = http://public-yum.Oracle.com/RPM-GPG-key-Oracle-OL6
  gpgcheck = 1
  enabled = 0

  Please help me...

  Visit this link to download the packges

  http://rpm.PBone.NET/index.php3/stat/4/IDPL/17843802/dir/scientific_linux_5/com/unixODBC-2.2.11-10.EL5.x86_64.rpm.html

  but do not know if it will work for oel6 as Sb mentioned.

  If you download the packages. You can install by this command:

  RPM - nodeps - ivh package_name.rpm

  - Michel

• Setup Oracle 11.2.0.1 error

  Hi all
  
  I m install the Oracle 11.2.0.1 database in my RHEL 5. When I m install I got an error. The oracle database Configuration Wizard failed.
  
  This is my log information:
  
  Reading: number that an unexpected error has been detected by the Machine virtual HotSpot:
  Read: # SIGSEGV (0xb) at pc = 0x9fbea498, pid = 24195, tid = 3086739664
  Read: # Java VM: Java hotspot Client VM (mixed mode 1.5.0_17 - b02)
  NEWS: Read: problematic frame: #
  INFO:
  Read: # C [libnnz11.so + 0x3c498]
  Read: a report of errors with more information file is saved as hs_err_pid24195.log
  NEWS: Read: # If you want to submit a bug report, please visit:
  Read: # http://java.sun.com/webapps/bugreport/crash.jsp
  INFO: Finished named Plugin: Oracle Database Configuration Wizard
  
  INFO: The Oracle Database Configuration Assistant failed.
  
  INFO: The Oracle Database Configuration Assistant failed.
  
  FYI
  --------
  According to the oracle doc, I installed linux with default installation (not custom)...
  The prerequisites for the DB Oracle 11.2.0.1 has been correctly installed...
  I installed the required components using package oracle-validated (yum install oracle-validated)
  
  During the normal installation process also the verification of the completed prerequisites. After completing 95% I have error.
  
  (I installed the DB Oracle 11.2.0.1 successfully in one machine to another using the same way, as I said above)
  
  Please, give us your valuable suggestions.
  
  Thanks for your help.

  Ignore my post above.

  I don't know why you think GR 11, 2 is not correctly installed. Apply the fix, then try netca and dbca to see if it works.

  Uninstall instructions are documented - http://docs.oracle.com/cd/E11882_01/install.112/e24321/remove_oracle_sw.htm

  Another option would be to drop the virtual machine and create a new

  HTH
  Srini