seven 11-2013. Windows 8, 64-bit, PC. update fails

Similar Questions

• Windows 7 64 bit receives updates for 32 bit

  My new laptop runs Windows 7 64 bit and I check the available updates automatically downloaded before I install them.  I noticed that some updates specify 32-bit... and when I read more about the Microsoft Windows 7 update, it shows the same update also for 64 bit and the file is a slightly different name.

  Example today: KB982726 update has been downloaded and has written for 32-bit and the name of the file is "office2010-kb982726-fulfile-x 86-glb.exe" but the KB982726 that says for 64 bit has a file name of "office2010-kb982726-fulfile-x 64-glb.exe.

  Most of the updates, I've been automatically downloaded do specify 64-bit, but I wonder if I need to start checking all the 32-bit downloads sent to me for a version 64 bit and install instead, manually.

  When there is a "64-bit version" of an update... and... since I get other updates to 64 bit, why do I automatically would receive the "32-bit version" of these updates?

  If Office 2010 32-bit (x 86) is installed, and 64-bit Office 2010 is NOT installed, updates are appropriate. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• On Windows Vista 32 bit full backup fails with error 0x8007045d i/o device.

  Original title: 32 bit back up fails i/o device error

  I'm doing a full backup, because I just perchased Office 2010. I am trying to download on my cd player, E: got as far the 3rd cd and it fails

  i/o device error (0x8007045d)

  Help with this error code?

  Hello
   
   
  Try the methods listed in the section below and check if that helps resolve the issue.
   
  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
  http://support.Microsoft.com/kb/952272
   
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 (64 bit) standalone update installer crashes or is missing from my laptop

  I reinstalled a fresh copy (original image) of Win7 (64 bit), the update to SP1 using Windows Update and try to install (based on the recommendations of Microsoft of 'most downloaded' website):

  KB947821 - analysis tool

  KB3108210 - update to Win7 for x 64 systems

  KB2670838 - platform for Win7 x 64 update

  So far all attempts have failed - my laptop it's there for always with the screen (this one below shows KB947821):

  

  I would appreciate any advice, suggestions or advice to solve this dilemma.

  Thanks in advance.

  Oops. I took the wrong number KB. It is KB3020369 that must be installed before KB3172605.

  https://support.Microsoft.com/en-us/KB/3020369

  :/

• Visual studio 2005 application stopped working after windows 7 32 bit OS update to service pack 1

  Hi support them.

  I did tutor which is used to record the Windows Application to the learning process. It is a 32-bit application that works fine in Windows XP and Windows 7 32 bit OS operating system. But after the upgrade of Windows 7 Service Pack 1, it doesn't now. When we try to record something, it's giving the guardian has stopped working and program disappears.
  Any product from Guardian:
  1. it is a Visual Studio 2005 application.
  2. in execution of tutor, turn us the key to register PEHOOK.
  3. some of the DLLs we use are: Interop * and other user defined dlls.
  4. it can be used to record any application Windows 32 bit OS.
  When searching I got a solution in the forum:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/application-has-stopped-working-error-on-Windows7/82b6fbcd-ABA7-49e5-833d-51ce42e6ef42
  But after installing it too, the problem exists.
  Could you please help me solve this?
  Thank you very much in advance.
  Best regards
  Manu.

  Hello Manu,

  Thanks for the updates.

  Since then, enforcement, guardian, uses Visual Basic, please post this question in the Forums of Visual Studio for assistance.

  If you have any other questions about Windows operating systems, please get back to us.

• Windows Vista 64-bit failure update

  I installed a new copy of Windows Vista on a Dell D630, after several updates, she ceased to update and note 6 updates failed.

  

  This KB2918614 KB967723, KB970430, KB972145 KB2345886 KB2378111

  

  

  Error code for all these mistakes is 8024200d

  The steps General to get here have been, install windows via CD, then install drivers for Dell downloaded via another PC and transferred via Flash DRIVE, and then connect to the internet and update processes. Whenever I've updated, I checked to install Security Essentials, after enough upgrades to date, that it is installed. More updated a few cycles later, these updates began to fail.

  Here are the details from the PC. So far the performance seems OK with this RAM.

  

  IE has apparently updated to 9

  

  I tried these fix tent with success, all the steps or methods have been carried out successfully, the disk check was OK.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/failed-updates-KB-2378111-KB-234886-KB-967723-KB/44124a25-D401-4F27-9589-98b9a0255743

  http://support.Microsoft.com/kb/2509997

  http://support.Microsoft.com/kb/947821

  By using dialog boxes, I ran this command as well as others suggest bugs who is there found.

  True C:\Windows\System32>fsutil resource setautoreset C:\
  The operation completed successfully.

  I downloaded every update manually and run as long as administrator, they are all note

  

  CheckSUR.log is less than

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.23186
  Version of the package 25.0
  2015-02-16 08:03

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Summary:
  Seconds executed: 12289
  No error detected

  Control CoreOS key to repairing the corruptions.
  Version of the winner: 6.0.6002.18971.
  The processor architecture: amd64.
  Check the key to be repaired: wcm://Microsoft-Windows-CoreOS?version=6.0.6002.18971&language=neutral&processorArchitecture=amd64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers \metadata\elements\ComputerName
  Recreated the value: @_type.
  Recreated the value: @dataOnly.
  Recreated the value: @default.
  Recreated value: @description.
  Recreated the value: @displayName.
  Recreated the value: @handler.
  Recreated the value: @legacyName.
  Recreated the value: @legacyType.
  Recreated the value: @migrate.
  Recreated value: @scope.
  Recreated the value: @xsd: type.
  Check the key to be repaired: wcm://Microsoft-Windows-CoreOS?version=6.0.6002.18971&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers \metadata\elements\ComputerName
  Recreated the value: @_type.
  Recreated the value: @dataOnly.
  Recreated the value: @default.
  Recreated value: @description.
  Recreated the value: @displayName.
  Recreated the value: @handler.
  Recreated the value: @legacyName.
  Recreated the value: @legacyType.
  Recreated the value: @migrate.
  Recreated value: @scope.
  Recreated the value: @xsd: type.

  I don't have a 3rd party anti-virus installed, just Security essentials. Software not Microsoft includes Chrome.

  Please help, I would like to get the updates completed, as they seem to be important.

  The computer in question MUST be connected to the internet to install MSE, so you may as well use this page, this page or this page.

• Windows Vista 32-bit security updates

  After latest updates of Microsoft for Vista, 32-bit security, PC check errors system and restore to the point before the updates.  Tried to make an update at a time and new system get reset before updates.

  Sometimes get no signal TV and the PC crashes and have to make a forced stop.  Get blue screen today and the message that Windows is not shut down normally press on enter to start Windows normally.  Enter the password and repeat.  Started with emergency CD today and then get the same results after execution of diaganostics: a blue screen, start Windows normally, repeat.  Look in safe mode did nothing no more.  It's several days ran disk clean up.  Defrag did not stand because the drive was only 1% framented.

  Has started with an HDMI instead of VGA cable to TV around the same time, this problem started and wonder if I should go back to VGA.  Don't think that could be a problem unless there is something wrong with the video card HDMI port.

  Got a new video card.  Cost not as so much that I would imagine in a local computer store.

  Got to make changes to the settings.

  Now I don't know even if I know how to find the old drivers.

  Thanks for your help.

• HP Laser Jet 1018 for Windows 8, 64-bit, printer intermittently fails

  I don't know if the problem is my computer or printer

  I have a new 64-bit of Windows 8 and the Laser Jet 1018 printer

  The printer does not print, but at the printer will not print and the red light blinks.

  Turning the printer off and turning it back on do not always resolve the problem - which does not solve the problem that I'm not sure, because it will start printing again after a number of failed attempts.

  I run troubleshooting and downloaded and run the HP print and Scan doctor, but none of these options have provided a solution or a fix

  Is there a problem with 64-bit Windows 8 and print driver?

  Warning triangle light Orange or red flashes a when of lightning, but I was not able to find a list that tells me that the sequence means or indicates

  Any advice or suggestions on troubleshooting would be appreciated

  Installed upgrading Windows 8.1 and that meant installing the latest driver for Windows 8.1 and that seems to have solved the problem, so far, printer worked without any problem

• I have windows Vista (32 bit). Update Windows repeatedly keeps on installing SP1, yet he is not successful. Kindly help!

  Formatted my laptop after having a few problems. Wanted to update to SP2, but I am unable to do so.

  "Error 0 x 80240020 when you use the Windows Update Web site, WSUS or Microsoft Update Web site to install the updates.

  http://support.Microsoft.com/kb/910341?WA=wsignin1.0

  See you soon.

• I did everything I was told to do about Windows Vista 32-bit system, update KB970430. I get this message after attempting to instaull 800b0100.

  KB970430/800 B 0100

  I always have problems with update meanings. Pls help

  Hi Nevaliverpool,

  All the troubleshooting steps you have tried to solve the problem?

  I suggest you to follow the steps from the link and check if it helps.

  Windows Update error 800b0100

• Windows 7 64 bit "last backup failed - error Code Ox80070020"

  Acer Aspire 5745 G notebook computer with Windows 7 Home Premium. Intel i3 CPU M350 @ 2.27 GHz 4 GB of Ram.

  Backup has never been completed successfully on this machine. I tried a normal and system backup, or complete. I tried also to backup on a key USB and a DVD r same error received in both cases.

  I have run CHKDSK C:/f/r and the/scannow STC. No problem detected in both cases.

  Then I ran the backup program, accepting the default settings... Same error received "the backup has failed. Error Code Ox80070020'.

  I have the East went to the backup settings and changed to allow Windows to choose the default value to use to decide. I unchecked "backup data for new users created.  Even if the backup seems further to 60%, before failing and return the above error. Previous backups have failed quickly after the start, 10 to 20% of the progress on the bar.

  When researching the problem on a similar problem in Windows Vista (different error message Ox80070002) has been attributed to a missing "HKLM\Software\Microsoft\Windows\CurrentVersion\WindowsBackup" registry key  Is there a similar key within the registry on my laptop. Searched the registry on my laptop with a negative result.

  Any help would be appreciated. Thank you

  Hello

  Thanks for the quick response.
   
  I understand that you have problems with a service named "event COM system +"(event system) - 'Manual' & 'Automatic'. "."
   
  (a) the name of the service is "system event COM +" (without the quotes) and that the service should have a manual or automatic status. In addition, should be started.
   
  (b) and if this service has a status of disabled or stopped then, follow the steps mentioned below to change the same.
   
  1. right click services, and then click Properties.

  2. If the service is disabled, change status to automatic and if it stops, and then start the service.

   
  3. restart the computer and then check.
   
  I hope this helps. Otherwise, answer this answer and we will be happy to help you again.
   
  Thank you

• Windows xp, 32-bit, sp3 update forces me to inert Office XP CD-ROM DISC, (Microdoft Office XP Professional with FrotPage) for the file PROPLUS. MSI. I DO NOT HAVE THE DISK, what to do?

  File missing PROPLUS. MSI to update SP3.  Impossible to update.

  Time to change the office suites.  Really.

• Impossible to update Windows 8.1 because the updates fail with error 0 x 80240004

  I am running Windows 8 Pro 32 bit without any problems and try to upgrade to Windows 8.1 without success.

  The upgrade does not appear in the MS Store on my system, I refreshed it as shown on one of the help pages.

  KB2885699 update (which should push update me) is not installed automatically when I download and try to install it I got error 0 x 80240004. I can't find any way to remedy this problem.

  Anyone has any ideas or am I stuck with the bog standard Windows 8 Pro that I use? I don't want to do a complete reinstall.

  Thanks in advance for your suggestions.

  Grant Dudley

  Original title: unable to update Windows 8.1

  Hello

  You need to run Windows Setup to get the opportunity to keep all...

  All my installs have either been done like that, or Setup bootable redirected by me to do this...

• HP Pavilion a1767c Vista Home 32 bit - BIOS update failed

  The unexpected happened by updating my BIOS, we lost the power.  Once the power came back, my machine was bricked.  I get the error of Checksum BIOS's Boot Blocker

  I did some research and found that I could re-Flash my BIOS so I could boot to a CD or a floppy disk.  I don't have a floppy drive, and after many attempts, I learned how to create a bootable CD with PHLASH16 and the extracted from the update of the BIOS ROM file that I had downloaded from the HP support site for my computer (sp37378.exe).  The question is the program flash will not read the ROM file that I've extracted from your exe file and I can't find the original file for the BIOS on the HP website.

  Am I right in thinking I can reflash my BIOS?

  Can you help me to loacate the worm/Date BIOS:

  Phoenix Technologies, 5.08, 12/08/2006?

  Thank you for your time and help,

  Ken

  From another thread, I started looking for a copy of the Bios file, I found my answer.  I tried to use the tool of phoenix bios when I should have used the bios awards tool.  You can search for "BIOS for Pavilion a1767c Vista 32 bit" for the full net.  Here is the comment that has saved my pc.

  Thank you all for your time and your help.

  Please try the file downloaded from the following link... some details are also provided in the readme files:

  https://SkyDrive.live.com/redir?RESID=1FFCCA6FE63FD77! 214 & authkey =! AOYevSziujFH8oQ

  I am an employee of HP.

  Kind regards
  Vidya

• New on windows - question about installations of update failed

  I am new to Windows, but recently purchased a netbook with Windows 7. I also installed Norton Internet Security.  I do not use the netbook every day, so every time I restart, I ensure that I update Windows and Norton.  Today, I watched the history of update and discovered that some elements did not install on other occasions. I don't know whether to worry about this or not.  If the elements have failed to install, say, two weeks ago, Windows Update would not try to install them again when I ran the update engine then?  I have received no notification on this topic - I just noticed this by looking at the history of update.

  While some of the elements initially appear in history as 'impossible' later appear as "successful", I can't find two articles among the facilities of 'success'  They are:

  (1) definition update for Windows Defender - KB915597 (. 1.79.702.0) and

  (2) definition update for Windows Defender - KB915597 (1.75.377.0.)

  Since the date where these two updates could not be installed, there are several successful installations of security for Windows upgrades and updates security cumulative for Internet project.

  I am now, I was wondering if the above is not updates of definition for Defender could have been included in the broader future updates.  Or should I still worry that these two items do not have install and try to do it manually?

  Thank you very much for your help!

  If you use Norton 360, please turn off windows Defender. If the Defender and norton are running, your system can know the performance degradation and other problems caused by the conflict of two services providing real-time protection at the same time.

  It is very important to update the virus definitions regularly. Otherwise you will not be protected against the latest threats

  Swede08, Norton 360 provides complete protection. However for a home user, I won't recommend that Norton 360 or other paid antivirus solutions

  You can use Microsoft security essentials. Its free of cost. Its your choice and depends on you and what kind of protection you need

  I hope the above information helps you

  If this post can help solve your problem, please click the 'Mark as answer"or if you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.