Windows Vista 64-bit failure update

Similar Questions

• Windows Vista 32-bit security updates

  After latest updates of Microsoft for Vista, 32-bit security, PC check errors system and restore to the point before the updates.  Tried to make an update at a time and new system get reset before updates.

  Sometimes get no signal TV and the PC crashes and have to make a forced stop.  Get blue screen today and the message that Windows is not shut down normally press on enter to start Windows normally.  Enter the password and repeat.  Started with emergency CD today and then get the same results after execution of diaganostics: a blue screen, start Windows normally, repeat.  Look in safe mode did nothing no more.  It's several days ran disk clean up.  Defrag did not stand because the drive was only 1% framented.

  Has started with an HDMI instead of VGA cable to TV around the same time, this problem started and wonder if I should go back to VGA.  Don't think that could be a problem unless there is something wrong with the video card HDMI port.

  Got a new video card.  Cost not as so much that I would imagine in a local computer store.

  Got to make changes to the settings.

  Now I don't know even if I know how to find the old drivers.

  Thanks for your help.

• I have windows Vista (32 bit). Update Windows repeatedly keeps on installing SP1, yet he is not successful. Kindly help!

  Formatted my laptop after having a few problems. Wanted to update to SP2, but I am unable to do so.

  "Error 0 x 80240020 when you use the Windows Update Web site, WSUS or Microsoft Update Web site to install the updates.

  http://support.Microsoft.com/kb/910341?WA=wsignin1.0

  See you soon.

• I did everything I was told to do about Windows Vista 32-bit system, update KB970430. I get this message after attempting to instaull 800b0100.

  KB970430/800 B 0100

  I always have problems with update meanings. Pls help

  Hi Nevaliverpool,

  All the troubleshooting steps you have tried to solve the problem?

  I suggest you to follow the steps from the link and check if it helps.

  Windows Update error 800b0100

• Messages to update Windows Vista 64-bit driver for Qosmio F30 Vista 32 bit

  Hello

  Today, I noticed that, update Windows Vista displays the bad update for one of the drivers of Qosmio F30.

  I have Windows Vista 32-bit, but Windows Update post a 64 bit version of the driver.

  See the screenshot [here: http://imagefilehost.googlepages.com/f30Wrongupdate.jpg]

  Any idea?

  Hmm... it's strange?  :|

  The ACPI from Toshiba x 64 compatible driver certainly means a 64-bit version!

  I put t know why Vista driver update notification indicates a 64-bit to a 32 bit OS driver, but usually the 64-bit driver should not be compatible with the 32 bit OS.

  However, the deal seems clear don t install if the pilot is not designed for your operating system.

  Concerning
  …

• WINDOWS VISTA 32-BIT UPDATES

  CAN SOMEONE HELP ME GET UPDATES FOR WINDOWS VISTA 32 BIT?   I AM NOT GETTING THE ERROR CODES, JUST CONTINUES ON THE LEFT SEARCH BAR RIGHT AND DOES NOTHING. NOTHING IS FOUND TO DOWNLOAD. I'VE NEVER HAD THIS PROBLEM.

  Hi BluesBlaster:

  If your initial "check for updates..." Windows Update crashes during long periods without raising an error, this is a widespread problem currently affecting many users of Vista SP2.

  Some users find that "check for updates..." will be finally run full if you let run for several hours, but there is also a workaround solution posted on the page Web of Dalai to http://wu.krelay.de/en/ that accelerates the Windows Update for the affected users. Of workaround requires users to pre-install the kernel-mode Windows updates (Win32K.sys) driver listed on this Web page, if one is missing from your system before running Windows Update.  I used Dalai for the latest Patch workaround three Tuesdays (the second Tuesday of each month) and has reduced my search for 'check for updates...' updates available for 6 or 7 hours up to approx. 25 min.

  Step-by-step instructions posted on 16 June 2016 wire m #l's updates does not, it was the search for updates to the hours are based on workaround of Dalai and will guide you through the installation process of packages update stand-alone (.msu files) for your updates Win32K.sys missing.

  As of today (11-Sep-2016) the current list of updates Win32K.sys on the page Web of Dalai is: KB3078601 (rel. 18 August 2015); KB3109094 (rel. 7 December 2015); KB3145739 (rel. 12 April 2016); KB3164033 (rel. June 14, 2016); KB3168965 (rel. July 12, 2016); KB3177725 (rel. 9 August 2016). Just install the updates that are not in your system, so if you have been fully patched at the end of July 2016 you must have to install manually the last KB3177725 (MS16-098: a security update for the Windows Kernel-Mode drivers: 9 August 2016) before you run Windows Update to install your remaining August 2016 Patch Tuesday updates.  List of Dalai will probably be revised tonight next Tuesday when the September 2016 Patch Tuesday updates (and a new version of Win32K.sys) are released on 13-Sep-2016, then you might want to wait a few days to try this workaround.

  Dalai has posted general information at http://wu.krelay.de/en/info.htm which explains why the Windows Update Agent (WUA) is currently suspended during the "checking for updates..." Windows Update.  The current v7.6.7600.256 Vista, C:\Windows\system32\wuaueng.dll WUA has not been updated by Microsoft since June 2012.
  ------------
  32 bit Vista Home Premium SP2 * Firefox v48.0.2 * NIS v22.7.1.32 * MMFA Premium v2.2.1
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

• Updates to Windows Vista 64-bit drivers /Driver

  Hello, I would like to know if Windows updater automatic/updates updated, update the drivers on a windows Vista 64-bit.  And if I update drivers through Driversupport.com it will improve my performance of browsers?  In general it is necessary to regularly update the drivers?  This will help with browsers not supported?

  Thank you for responding.

  Windows Update does work just in pc hardware updates/software/drivers. If you have specific

  controllers PC which are necessary, you're best bet is to go to the web pc mfg. Although Win 7 on the

  MFG site are outdated. If it's a pc intel, go to: intel.com/support/software/drivers,locate the

  Intel update utility, it scans any pc processor intel for installation updates, & is common or browse intel

  Download Center/chipset software.

  You're browser, so up-to-date, does not work as well as pc offers...

• Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates

  Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates.  He worked for years until now.

  How to fix?

  Thank you

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/Vista-Windows-Update-does-not-work/8385103e-4117-4b0c-B21F-27a266fdf4a9

• Windows vista 32-bit update service pack 1 error 80073712 when I try to install.

  I tried and tried to install the updated Windows vista 32 bit service pack 1, but also try to update manually, however I continuously get the update error 80073712. I tried the scan tool update service, troubleshooting automatic on the Microsoft Support Web site, as well as research on the Microsoft Answers site for more assistance. However, I still have the same problem, then what else could be the cause so many dell used laptops for not updating this service pack. Either way, I haven't installed service pack 2 either, as I mentioned on some of the answers.

  Microsoft says that the operating system is corrupt, so SP1 or SP2 fails. Follow this link for repair.

  https://support.Microsoft.com/en-us/KB/957310#/en-us/KB/957310

  In addition, the article is ok, but he fails to mention that, after analysis of the Sfc runs, must complete the process.

  It is, done Sfc, you must also type: CHKDSK C: /F agree to restart, type: EXIT

  restart the pc... When the computer reboots, the repairs are installed/fixed, w/o this cmd, just retry the update is not

  possible, installations/repairs, can take place only when the pc is restarted...

• Update for Windows vista 64-bit service is not running. I tried to restart. How to start or load update service? I explorer 8.

  Explorer 8

  I have Nortorn 360 installed and running.

  Windows Vista 64-bit

  So far the service is not running. I tried to restart, Fix.

  I deleted the update log I saw another thread, the fix o.

  Hello

  1 did you changes to the computer prior to this problem?
  2. you receive an error message?
  3. what solution did you try?
  4. What are the troubleshooting steps you have tried?
   
  Method 1:
  You can try to start the fix - it and check. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
  Method 2:
  You can try to temporarily disable anti-virus installed on your computer and check.
  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Method 3:
  You can see the following link.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: the above article contains steps that tell you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
  For more information about how to back up and restore the registry, follow the steps from the following link:
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  It will be useful.

• Problem with internet connection 64-bit Windows Vista, unexplained intermittent failure.

  original title: PROBLEM CONNECTING WINDOWS VISTA 64 BIT INTERNET - UNEXPLAINED INTERMITTENT OUTAGES

  On HP a6542p PC with factory installed Windows Vista (64-bit), Vista operating system program does not take account of Internet broadband, which, in reality, a good connection.  for the first 2 years of operation, the PC internet connection worked well, but a year ago, he started this OFF intermittent / WE internet problem.  SOMETIMES, I can manage to temporarily restore the internet after running randomly across the machine diagnostic & installation programs available to the home screen, OR SOMETIMES also after running REGEDIT in the start (search) bar and watching the TCP/IP settings (do not change them, just watch), but the internet connection drops again after the machine is idle for a few minutes.  I get very tired of the exercise Dog & Pony to run through the different random procedures & hoping that something will work.  I tried the fix from Microsoft using a flashdrive D/L from the Windows site to my XP machine and tried a few manual corrections proposed on various websites, but nothing seems to work.  I have no HP manufacturer disk to reload the Vista operating system.  The connection is good, the cable is good, but Vista gives me contradictory information about the diagnosis, such as ERROR 815, and he tells me also a cable is disconnected (not true, the cable is plugged & good & works very well when the Vista connection is restored), while another diagnostic message indicates the internet connection is good, at the same time other messages say is not.   What can I do to fix this problem in Vista?  Personal e-mail is: * address email is removed from the privacy * -I will check that URL of Web site for the possible answer.    Thanks in advance.

  Imrand - Thanks for the tip, I tried it & it didn't work.  However, I found an update of the HP driver for the network card Realtek in my machine, & after d/l this new driver, the problem seems to be fixed.  The Web connection is still good after several cycles of closing & reboot.  I'm not sure, because with this HP Vista PC, I can never be sure of anything, but I think the problem might be due to the rotating system off the NETWORK adapter in sleep mode, & so not put on when waking up.  Diagnostics messages confused and contradictory pages of different screen Windows were of NO use, it looks like the internet connection was good (which it was), while the other would be at the same time say there is no connection due to the disconnection of the cable, while the other at the same time say that the DNS server broadband couldn't recognize my internet query.  Total BS of Vista, which has compounded the problem than he was.  I only am not surprised Microsoft abandoned the Vista operating system so fast, so many other users of Vista have similar internet connection problems.  The user friendly and very stable XP operating system I have on an old PC of Insignia is my favorite.  Microsoft had to quit with it, IMO.

  Thanks for your help, Cimarron

• Problem installation of update KB2556532 on Windows Vista 32 bit - stops configuration stage 3 of 3

  original title; Problem installation of update KB2556532 on Windows Vista 32 bit

  I had problems for the last two months trying to install the update to windows KB2556532. I have Windows Vista 32 bit.

  I had a virus that has been cleaned of my laptop. It was windows recovery of fraud, and I don't know if this could have caused the problem at first, but after you have cleaned the virus always impossible to install this update.

  She always says that it has installed ok, but then when the computer has restarted, it is located in 'Configuring Updates step 3 of 3..' he said then that the update was not installed correctly and is back from changes.  Once the computer has booted I am prompted to install the update again.  It continues in this loop.

  Can anyone help me please with this.  I can't online solutions for this problem, I looked for a few weeks to try and fix myself.

  Unfortunately if this utility installs not it is not that there is something corrupt or prevent Windows to install correctly.

  At this point you can try to contact Microsoft through these channels: https://support.microsoft.com/oas/default.aspx?gprid=11732&st=1 to see if they can provide assistance.

• Automatic updates of Windows vista 64 bit do not install. It is also a relatively new problem.

  Automatic updates of Windows vista 64 bit do not install. It is also a relatively new problem.

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• KB2398382 and updates on Windows Vista 32-bit - KB971029 offered several times after successful installation

  original title: KB2398382 and KB971029 updates on Windows Vista 32-bit

  My PC is running Windows Vista 32 bit.  KB2398382 and KB971029 were listed as installed successfully in the history screen to update windows since February.  However, it is always offered and intalled daily and shown every time successfully.  If it has been installed correctly, why it keeps appearing as important update?  Please help me to get rid of these two updates.

  Hello

  You can follow below link that can help you to solve your problem:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339

• Windows Vista 64-bit of Windows 7 32-bit update?

  G ' Day,.

  I've seen a lot of Windows Vista 32-bit to Windows 7 64 bit upgrade questions, but that the opposite?
  I just moved houses, and I think I lost my CD of 32-bit of Windows Vista, but I found my 64-bit of Windows Vista CD and I am wanting to buy Windows 7 Uprade but only to install the 32-bit version.

  You can do in the modernization of the place of Windows 64-bit to 32-bit Windows, and vice versa. Its a clean install only. I suggest that you use the Windows Easy Transfer utility included on the DVD of Windows 7 to create a backup your personal files.

  Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com