Several axes are overlay eachother
I'm working on a program that will allow users of land up to 5 different channels with axes y indepdnant. I make it visible / invisible depending on how many channels is being plotted. Unfortunately, the lines begin to overlap eachother. I decided to remedy by program
The code works fine initially (for having prevented the axes that just overlap eachother), but quickly spoil once you start making them visible / invisible.
Ideas / solutions?
I finally found a solution. I'll leave it here if someone stumbles across this post in the future.
You need to right click on the chart, then select Advanced > Auto adjust scales. It will turn disables the behavior on and off-axis resizing of the plot area (which is causing problems, started by). Then you just manually set all your sizes and positions.
Note: you will want to add error handling in this section. If you have zero visible plots, it returns an error.
Tags: NI Software
Similar Questions
-
"Graph - Simple" change issues to include several axes
I'm changing the workspace "Graph - Simple" object to allow several axes. However, I was do unexpected behavior and I can't find a way to restore the configuration when the next load.
- Is there a way I can use the "Custom Data" variant in the Item.Data cluster to store the configuration?
- If not, is there another way I can do this work within VeriStand without having to re - develop a full graphical object (based on the free label template) just to add this feature?
I am currently using VeriStand 2014, but I can be updated until 2015, if there is a new feature that would help.
Thank you!
You're very close to having the right answer, but what you call won't work, unfortunately. Overall, it would be nice to put data in the custom as attributes of variant data field, as long as you crush all VeriStand attributes can be expected otherwise. Even if you do this, however, there is no way to save this copy of the cluster of the top-level VI item data. I can't in any way you can get this to work.
However, you do have to start from scratch. It is an available add-on here called Multi-Y chart with channels calculated. It has multiple scales are natively, but this is a graph open source with a superset of the features in the chart - simple. Here you could probably change to have two or more axes and find a good way of saving data so that it persists on the next load.
I did not write this control and never used personally, but it might be a more open alternative to watch before thinking to start over from scratch.
-
When a download is started from a private tab notification is automatically rejected at the end.
If several downloads are active, it won't.
notification by the full download will show the status and the name of the current download, while the notification belonging originally to the current download will keep displaying the % the current download had when you have finished uploading else.Thanks for the report! I filed a bug in Bugzilla to track this issue.
-
When several pages are open, I want to see a thumbnail image of the page hot description
When several pages are open, I want to see a thumbnail image of the page to warm an edit summary description
You can get an overview of all the tabs opened using the functionality of the tab groups.
You can see a miniature of a tab preview when you place your cursor on it using the extension of the scope of the tab.
-
My computer crashed so I had to use my recovery disks that are about 8-10 years. When I reinstalled Windows service pack 2, the system recovery tools and several other microsoft tools not have installed on my system. Is it possible to recover these tools? The command prompt tells me that they are not on my system and get help from the Server Manager in the service (Net HelpMSG 2185) option. Can you tell me what that means and if/how I can do this? I can't find a tab from the system restore on my computer. I guess that's because I have more access to these tools. My messages when I try to update things like Windows Media Player tells me that I can't set a date of restoration and that if I lose my installed programs that they can not be recovered. Guess that means I have to use my recovery again disks?
<(Microsoft tools="" for="" the="" system="" restore,="" disk="" framentation,="" and="" several="" others="" are="" missing.="" is="" there="" a="" way="" to="" retreive/reload="" these="" tools?="" (assessories,="" system="" tools)="">
Hey, take a look at the article and try the steps
http://www.softwaretipsandtricks.com/Forum/Windows-XP/17333-System-Restore-tab-missing-XP-Pro.html
See you soon!
(Microsoft> -
Standyby.exe - bad picture message arising and several programs are now no longer works
Original title: Standyby.exe - bad Image message 19/08/12
Hello world
I get a Standyby.exe - bad picture message arise. Several programs are now no longer works as iTines, Photshop and MS Word. In the message window begins C:\Windows\assembly\NativeImages_v2.0.50727... I have run several anti virus and malware programs normally and in safe mode, try the system restore, run registry cleaner programs and even took the computer to my local computer guy. All of this is without effect. Given the nature of the message and the type of programs not responding, it seems that I have a missing or corrupt file regarding execution of the images, but I don't know. Can anyone help. I'm pretty close to the stage where I could reinstall Windows, but I only want to do this as a last resort, given the amount of programming that I have to re - install. Oh - the system I'm using is Windows7 home premium, 32-Bit, RAM decent, proccessor and HD etc.
Any help... Thanks Jim
Hello
1 did you changes to the computer before the show?
2. when exactly you receive this error message?
3 have you experienced the issue when you opened the 'Safe Mode'?
I suggest you follow these methods and check.
Method 1:
Step 1: Try to restart your computer in safe mode and check if you receive the error message.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
If it works fine in safe mode, perform the clean boot and check.
Step 2: Perform the clean boot using the suggestions mentioned in the link mentioned below.
http://support.Microsoft.com/kb/929135
NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.
Method 2: Run the tool (SFC.exe) System File Checker and verify the.
Measures of the follow this link: http://support.Microsoft.com/kb/929833
If the problem persists, I suggest you to bring observant event logs.
Check Event Viewer for events, at the time, the problem occurs:
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
I hope this helps!
-
Several secure areas to form one login
Hey everybody.
I need to add in multiple areas secured to a single login form, so that each customer is redirected to his unique secure area with data that it cannot access. Each client has different data, obviously, so I need to create a secure for each area.
It is, it seems that in the login form, you can only add ONE secure area ID.
I can't believe that they do not have a simple solution to a big problem. Why would need a secure if the data would not be private for each person?
Any help is appreciated
Hello
Please check the following discussion
Several areas with a single Login Form
Re: Several secure areas with shapes that disappear (or a redirect link) if the user is connected
Let me know if you have any question.
-
outer join when there are several tables are involved
Could not put up the question correctly to the last channel, my problem is with the join when there are several tables are involved, this is just one example of the task that I have to carry.
Tab1 aura model id retailer_id information for all the weeks (from the first Monday) of the month of JUNE with cost and Helen
Tab1
model_id
retailer_id
sell_date
cost
Helene
1
12
June 3, 13
100
40
1
12
June 10, 13
200
20
1
12
17 June 13
300
20
1
12
24 June 13
400
20
2
12
June 3, 13
300
10
2
12
June 10, 13
200
20
2
12
17 June 13
300
20
2
12
24 June 13
400
20
Tab2:
each retailer belongs to a dealer, under the table has the same information
retailer_id
Dealer_id
12
100
13
100
14
101
15
101
16
101
Tab 3
There is a third layer where each dealership is having a garage band
Dealer_id
Dealer_group
100
1001
101
1001
102
2001
103
2001
104
3001
105
3001
Tab4:
Of this table for each model and dealer discount information for the month of June (every week)
model_id
Dealer_group
discount_date
discount
1
1001
June 3, 13
10
1
1001
June 10, 13
20
1
1001
17 June 13
10
1
1001
24 June 13
30
2
1001
June 3, 13
10
2
1001
June 10, 13
20
2
1001
17 June 13
10
2
1001
24 June 13
30
3
2001
June 3, 13
10
3
2001
June 10, 13
20
3
2001
17 June 13
10
3
2001
24 June 13
30
Master_info:
It's the main table which is the master table for model /retailer information
Model_id
retailer_id
1
12
2
12
3
12
4
12
1
13
2
13
Output
model_id
retailer_id
sell_date
cost
Helene
Final (cost-helene-discount)
1
12
June 3, 13
100
40
50
1
12
June 10, 13
200
20
160
1
12
17 June 13
300
20
270
1
12
24 June 13
400
20
350
2
12
June 3, 13
300
10
280
2
12
June 10, 13
200
20
160
2
12
17 June 13
300
20
270
2
12
24 June 13
400
20
350
3
12
June 3, 13
0
0
0
3
12
June 10, 13
0
0
0
3
12
17 June 13
0
0
0
3
12
24 June 13
0
0
0
4
12
June 3, 13
0
0
0
4
12
June 10, 13
0
0
0
4
12
17 June 13
0
0
0
4
12
24 June 13
0
0
0
1
13
June 3, 13
0
0
0
1
13
June 10, 13
0
0
0
1
13
17 June 13
0
0
0
1
13
24 June 13
0
0
0
2
13
June 3, 13
0
0
0
2
13
June 10, 13
0
0
0
2
13
17 June 13
0
0
0
1
13
24 June 13
0
0
0
For highted above records (model_id / retailer_id combination) there is no record in tab1 but they have entered in master_info then the recordings should come for all model_id/retailer_id with all the 0 values
Hello
Thanks for posting the sample data.
It is unclear what dates you want to include in the output. The following query shows how you can generate every Monday in a given range. If you only want to include the dates that are actually present in tabl1 and/or tab4, you can simplify this a bit.
WITH date_range AS
(
SELECT TRUNC (TO_DATE (' 3 June 2013', 'DD-Mon-YYYY'))
, 'IW '.
) AS first_monday
, TRUNC (TO_DATE (24 June 2013 ', 'DD-Mon-YYYY') + 6)
, 'IW '.
) AS last_monday
OF the double
)
all_mondays AS
(
First_monday SELECT + (7 * (LEVEL - 1)) AS sell_date
OF date_range
CONNECT BY LEVEL<= 1="" +="" (="" (last_monday="" -="">=>
/ 7
)
)
SELECT mi.model_id
mi.retailer_id
am.sell_date
, Cost of NVL (t1.cost, 0) AS
, NVL (t1.rebat, 0) IN the refund
, NVL (t1.cost, 0)
-(NVL (t1.rebat, 0))
+ NVL (t4.discount, 0)
) AS final
E master_info
CROSS JOIN all_mondays am
LEFT OUTER JOIN tab1 t1 ON t1.model_id = mi.model_id
AND t1.retailer_id = mi.retailer_id
AND t1.sell_date = am.sell_date
LEFT OUTER JOIN tab2 t2 ON t2.retailer_id = mi.retailer_id
LEFT OUTER JOIN tab 3 t3 ON t3.dealer_id = t2.dealer_id
LEFT OUTER JOIN tab4 t4 ON t4.model_id = t1.model_id
AND t4.dealer_group = t3.dealer_group
AND t4.discount_date = t1.sell_date
ORDER BY mi.retailer_id
mi.model_id
am.sell_date
;
The results are not exactly what said you you wanted. I suspect it's because of typos in that you posted.
-
several facilities are allowed with Lightroom5? Desktop and Laptope
Several facilities are licensed with Lightroom 5? For example, on my desktop and on my laptop?
Thank you
Yes
-
If several LOVs are defined on an attribute
If several LOVs are defined on an attribute how to switch between them please explain with examplehttp://andrejusb.blogspot.com/2008/10/multiple-lovs-per-attribute-in.html
-
Adding several Photos by overlay to a Windows Movie Maker video
Hello
I'm working on a film project. I followed Litton_B
Tips on how to add several layers of photo for a
Windows Movie Maker video Live while keeping
the sound of music. (The pictures with the words of the songs)
I've been able to add photos and remove the video
portion as I went along, as he instructed. I then save it.
He looked and sounded a lot. However, every time that
I'll be back in Windows Movie Maker Live to work on
my project, the audio (music) part of this portion of overlay
my video is silent. I tried this three times and I
the same result. Do you have any suggestions? My email
the address is * address email is removed from the privacy *.
Thank you.
M rich
I have
Try windows media encoder 9 series, its utilities always run microsoft downloads, but is not the encoder.
Use a search engine web for her, once running, the encoder can convert audio and video, more recording.
Use the microsoft update to download catalog.
http://catalog.update.Microsoft.com/v7/site/search.aspx?q=Windows%20media%20encoder
In addition, movie maker is to v2.6
In addition, look for these kb927544 KB2117917-french kb929182 updates
-
A field to retrieve e-mail address several other areas
I have a form where he asks the user to different places for their e-mail address. 6 to be exact. This form is intended to get their email address with a series of different questions and answers. However, the e-mail address must eventually end up in a field. So if the user enters their email address in any field 1-6, he ends up in field 7. The user may enter their email address in several areas, but the first failure of an entered e-mail address entry, ends up in field 7. I tried a multitude of different snipets code, but nothing seems to work. It was the last code I tried to use, put in each text field in a mouse to the top of the trigger.
the value of power reactive
var a = this.getField("501");
var two = this.getField("502");
three var = this.getField("503");
var 4 = this.getField("504");
five var = this.getField("505");
six var = this.getField("506");
seven var = this.getField("507");
This function which checks if the destination field is empty and if so popluates it.
function checkAndPopulate (orig, populate) {}
if(Populate.value==''||) Populate.Value == null) {Populate.Value = orig. Value}
}
Copy the value from one to two, three and four
checkAndPopulate (one, two);
checkAndPopulate (one, three);
checkAndPopulate (one, oven);
checkAndPopulate (one, five);
checkAndPopulate (one, six);
checkAndPopulate (one, seven);
Delete all these scripts you added and instead add it the calculation script customized to the target field:
var fields = ["501", "502", "503", "504", "505", "506", "507"]; event.value = ""; for (var i in fields) { if (this.getField(fields[i]).valueAsString!="") { event.value = this.getField(fields[i]).valueAsString; break; } }
-
Sliding menu with target composition widget area overlays other controls on the page
Dear users, I really need help with this, and sorry if I'm creating something repeated, but I cound not find another like that.
I m working in a site with a sliding menu and two different modes (desktop and mobile).
On the desktop computer:
The sliding menu works very well and several other controls on the page or widgets work too. But the target composition´s box is greater than some elements and Don t enable these controls. I designed the page layout to avoid interference (in most cases).
Mobile (cell phone):
The sliding menu completely occupies the area of content and item target hides all items. For example, accordion on a layer below, for example, does not.
Basically, I'm working with three layers: "Menu", "header", and "content". Navigation (such as arrows) are on the layer "header". The content (such as text boxes or accordions) can be found below, on 'content' layer.
How can I solve this problem (without content leaving appears on the menu, change layers order).
Thanks for the help!
The container target if above other content then it would default behavior, you must work with layers and present the content to be active.
Even with any phone, any content you want to view should go with the top layer.
Thank you
Sanjit
-
All the
I try to run a script that will create several VM to leave a template and then customize each using an OSCustomization.
Also (very simple) script readings
New-vm - vmhost xxx-xxxxxxxx-model name MODEL-2K8R2EEx64 - xxxxxxxxxx Datastore - OSCustomizationspec OSCust-TEMPLATE-2K8R2EEx64
Is the error, I'm reacieving
New virtual machine - the specified parameter 'Template' expects a single value, but your "MODEL 2K8R2EEx64" name criteria corresponds to multiple values.h\VMware\PowerCLI\scripts\MultiVMDeploy.ps1:1 character: 7< < < - vmhost (HostName) - name CEIVIRDAS0060-model-MODEL-2K8R2EEx64 - store of data VMFS08 - OSCustomizationspec OSCust-TEMPLATE-2K8R2EEx64That suggest that there are TWO models with the same name... soI ran Get-Template-TEMPLATE name-2K8R2EEx64 in PowerCLI I see in fact two TEMPLATES with the same name (see below).[vSphere PowerCLI] C:\Stash\VMware\PowerCLI\scripts > Get-Template-name TEMPLATE-2K8R2EEx64ID name---- --MODEL-2K8r2EEx64 VirtualMachine-vm-61686MODEL-2K8R2EEx64 VirtualMachine-vm-66484But in vSphere, there is only one model with the name "MODEL-2K8R2EEx64.I don't know where the 'other' model object with the same name. Help someone?This allows to see the blue folder where the model is supposed to be located.
Get-Template | Select Name,@{N="Folder";E={(Get-View $_.ExtensionData.Parent).Name}}
-
while clicking on the link. Several Tabages are added.
Hi experts jdev,.
am on jdev 11.1.1.5.0 - adfbc - mozilla9.0.1 - oracledb10g.
Here I summarizse. what I've done.
index.jspx page uses for the af rendering: tree. When I click on the corresponding map links in the tree. It will focus on a single page jsff (dynamic region).
I had af:tree.
The tree exposed as a link af:command
My taskflow codewhile am clicking the click. coresponding taskflow will calls. xyztaskflow()
method calls:public String xyztaskflow() { taskFlowId = "/WEB-INF/Task-Flows/Supplier-task-flow-definition.xml#Supplier-task-flow-definition"; launchActivity("Suppliers",taskFlowId,false); return null; }
For above the method (launchActivity) link I mentioned here.private void launchActivity(String title, String taskflowId, boolean newTab) { try { if (newTab) { TabContext.getCurrentInstance().addTab(title,taskflowId); } else { TabContext.getCurrentInstance().addOrSelectTab(title,taskflowId); } } catch (TabContext.TabOverflowException toe) { // causes a dialog to be displayed to the user saying that there are // too many tabs open - the new tab will not be opened... toe.handleDefault(); } }
http://www.Oracle.com/technetwork/developer-tools/ADF/Uishell-093084.html
all these things I've done are very good.
Please see the following pictures. These are my outings.
pic1:
http://www.4shared.com/photo/tmmAaiHV/Step1.html
NOTE2:
http://www.4shared.com/photo/Yya8-Oj_/Step2.html
pic3:
http://www.4shared.com/photo/f4eX-5GP/step3.html
Look at pic2.
When I click on link provider means provider task flow is open on the right side. (you can see that in Note2)
See pic3.
When I click on link of banks/terms means banks/terms is open on the right side. (you can see that in pic3).
but my problem is banks/terms tab added to the Provider tab.
NO, I don't like that.
a tab at a time. want added several tabs.
for example:
If I click on the link provider means provider tab should open.
If I click on the link of the average banks/terms
supllier tabs and supplier within the dynamic region of provider must close automatically. and banks/conditions tabs opens automatically.
I realized that my message is so long. a little hard to understand.
Here, ready to explain. When confuse you.You can have
tabContext.removeCurrentTab ();
before you open tabs.
Maybe you are looking for
-
After you install the update, I get this message on a Facebook '502 Bad Gateway applicationNginx' what is the problem and how do I solve the problem?
-
Satellite L650 / 0K 3 - attracts dust
My 3 week old Satellite L650/0 k 3 works well EXCEPT that it attracts dust. On the screen, the keyboard and the body. You could call cela a magnet to dust. This does not affect its operation, but my laptop is black and dust is very visible. Yes, I ad
-
Immediately following October 10, 2013 Windows Vista update automated - 25 updates is installed on my Toshiba Satellite laptop and HP Pavilion Desktop - cannot send emails from a computer using Windows Mail - they return both the same error message:
-
Cannot perform updates of Windows with 641 and 80070641 error codes
Original title: update problems Get 641 and 80070641 errors every time I try to download updates. How to solve this problem?
-
Userinit.exe WINDOWS VISTA cannot open a session! Help, please
I've accidentally disabled and removed userinit.exe thinking it was a virus of our pc at home. I created a Vista recovery disk to try to restart and copy the file by using the command line option in the system recovery console. I had no luck trying t