Several masks on a stage not effective.

Similar Questions

• Several masks and reversed

  I added a mask and it reversed and want to get the same effect on several masks, but when I put all others to just subtract makes black instead of use the effect. What should I do?

  Screenshot for reference:

  

  No need for an adjustment layer. The screenshot is not very clear, but you applied hue and then seven masks but only mask 1 is selected in the effect of the composition.

  Here's how to do it correctly. Draw your seven masks. The mode of addition for masks will give you seven circles. Change the mode to subtract and you will have seven holes in your layer. Now apply the tint effect and her centrifuge Compositing options and tap the + 7 times for all seven masks as composition of the layer options. EZ, quick and for this purpose better than an adjustment of the layer.

  When you have problems with an effect or a procedure the first thing you can do is to select the layer and press the U key twice to reveal all updated the layer properties. If the solution is not obvious, and then type the name or the effect, or the procedure you use in the field search for help in the upper right of the AE and discover the resources of the community. You will find generally better training than if you just start poking around Google or YouTube. You have your trainers to sift through and make sure that they know enough for you point to the effective techniques and good workflow. About half of the training on YouTube isn't very good and there are a bunch of it that will teach you bad habits and terrible workflows.

  Just in case where you're not the explanation here is what should be your model.

  

• Well, after spending several hours of research and not coming up with solutions, I'm finally back to get "out there". My problems with iMovie 09-1 - import a picture in iPhoto 9.6.1 in an existing project in very small. All the appe

  Well, after spending several hours of research and not coming up with solutions, I'm finally back to get "out there". My problems with iMovie 09-

  1. import a picture in iPhoto 9.6.1 in an existing project in very small. Everything seems OK, picture looks that it imported, 4S etc but in fact there nothing there except a black screen, long 4 seconds. I tried all the suggestions in a dozen of discussions but nothing works.

  2 - by sliding the cursor (pointer) on clips in the project or the event of the flip backwards and return to normal once the cursor is removed. Clips of transfer of events to the project smoothly and are right side up.

  What can be done on the transfer of photos and clips reversal?

  Are you running at El Capitan?   He does not play well with versions of iMovie earlier than version 10.

  (Even in 10.1 some pictures with some computers may show a black in the viewer screen, although in this case there are solutions.)

  Geoff.

• All of the delay flashing in options not effects at run time

  Hi all

  I found a problem with the blink property node which is which:

  I put delay flashing 200ms in the options first and then use the property node of flashing to assign a LED flashing, which comes into effect in the development environment. But it is not effective in the execution environment, after that I generated the code to exe, flashing delay is always 1000ms.

  The version of LabVIEW, I used is 2011 sp1, could someone help me solve this problem? Thank you very much.

  Belay that.

  Edit your "application".ini file and include "blinkSpeed = 200".

• The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490).

  The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.

  
  

  I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• A popup thinkpoint guard sayingdatabase update failed, and that out-of-date virus databases are not effective

  original title: HELP; A popup thinkpoint keeps sayingdatabase update failed, and the obsolete virus databases are not effective thatI need a version complete a required heuristic module... . How or what do I do to solve this problem?

  I can't find a free trial version for this add-on.

  It's what we call a "Rogue Security Program"... in plain language, it's a complete and utter scam.
  Please read this to be able to access the desktop so that you can rid this Rogue software system-
  Remove ThinkPoint (uninstall Guide)

  Expert MowGreen Windows IT Pro - consumer safety

• WINDOWS 7 allow interrupt sharing. We have a system that has several COM ports and IRQS not enough.

  Original title: some j

  WINDOWS 7 allow interrupt sharing.  We have a system that has several COM ports and IRQS not enough.  In XP Pro, there was a sharing bit interruption that you can set in the registry editor that would allow this sharing.  Sound in windows 7, but it doesn't have the same results.  Any ideas?

  Hello

  I suggest you to report this issue in TechNet Windows 7 IT Pro Forums: http://social.technet.microsoft.com/Forums/windows/en-US/home?forum=w7itprohardware

  Thank you.

• DB zone not effective after been changing zone SCHEDULE OS

  Hi oracle GURUS.

  DB zone not effective after been changing zone SCHEDULE OS.

  OS: LINUX

  ORACLE: 11.2.0.4

  Node 2 CARS.

  Thanks in advance

  Jr.Raj

  You will need to learn how to use Google, please.

  I googled for free on your account on "zone CARS" and came with

  Blog on the Oracle RDBMS's on the Linux operating system and around it: change of time zone in Oracle 11 g RAC

  Can you explain this forum why you were unable to find it?

  ----------

  Sybrand Bakker

  Senior Oracle DBA

• Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  To refer to EX11 some:

  Creative cloud (WIP) error codes | Error postal codes of Mylenium

  Mylenium

• Mask and followed does not

  Hi, I have a problem trying to make the mask & follow the new feature to work. I draw the mask and when I press on the track, there's no progress. I can always follow farm frame by clicking on the arrow of the next frame, but obviously, this isn't the way I want to do because it takes me forever.

  This new feature will really simplify my workflow and I find it quite frustrating to make it work.

  I work on 1080p25 fps on Apple Pro Res 4.2.2 and I also try used DSLR footage with no luck either. Using a Mavericks Pro on Mac

  Thank you

  Make sure that you do not have "Reference monitor Gang" checked in a reference check or monitor Monitor window. Mask of tracking does not work when this field is selected. Once disabled, mask of follow-up should work fine.

• Low volume after installing several different drivers. Can not find the original driver to reverse the effects

  Hello. First of all, thank you for taking the time to read this message. I'll try and add all the valuable information that I can. However, if you would like more information to help solve the problem, please let me know. So a few weeks ago, I noticed that my audio was very distorted (as you know that your laptop does when you work it, the sound the sound). I downloaded the driver HD audio Realtek, made sure it was updated to help with the distortion. Well, then the volume become too low. I continued install audio drivers Realtek HP, remove all devices from realtek (under sound, video, game in Device Manager controller), passing through updates on internet, etc., but nothing works. In addition, I have gone from reading devices (under the volume in the taskbar icon), by selecting My speakers, go to the properties and selecting improvements and selecting "Loudness Equalizer." So far, which helped a bit. My volume is now 100% and it looks like he did when he was 20% (when there is no problems).

  Unfortunately, I do not know how long this problem has persisted, and I don't think that there is a restore point before that time to try to reverse the effects. Is it possible that I can find the original driver delivered with this laptop? Currently, I went to Device Manager > Sound, Video, game controller, Realtek HD Audio, update > Browse > let me pick > choose the driver earlier.

  Any advice would really be welcome

  Hi @kendrat0,

  Welcome to the Forums of HP's Support. It's a good place to find the help you need, other users, HP experts and other support staff. Thank you for sharing the details of the problem. I want to help you.

  If I understand correctly the audio quality is lower than expected and need a solution.

  (Correct me if I'm wrong, and I thank you for the details)

  Could you please provide me with the product number of the PC? If you don't know how to find this information, please click here for more information.

  I have a few steps, you can perform to resolve the issue: remove audio drivers & reinstall the original drivers update Audio drivers on the official website of HP for windows 10 (click on the changes on the top to switch between the BONES).

  Increase the volume on the playback device settings after you set your speaker as the default device. For more steps, follow a similar post on the HP Forums: click here

  Perform a hard reset

  * Reset the BIOS default

  * Run the test Audio of Diagnostics of material for the PC HP (UEFI)

  * Update the BIOS

  * Reset your computer

  Perform a recovery of the HP system

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!

  If you are unable to reach a resolution, please click on accept the Solution to help others with similar issues.
  If you like my assistance, please click on the thumbs up icon.
  The two icons are below this post.

  Kind regards

• How to configure Firefox to open several pages at startup and not my home page to open several tabs?

  So I don't know how to set my homepage to open several tabs, however she has the undesirable effect of which in fact so these tabs are opened, whenever I hit the home button. Is there a way to set Firefox to open several pages at the start, while not actually affecting home page to open several tabs?

  You can modify a copy of the desktop Firefox shortcut and add links in the field target to make Firefox to open these pages when you use this shortcut.
  See:

  • https://developer.Mozilla.org/Command_Line_Options

  If you need more space (i.e. exceeds the maximum length) then use a CMD file with the start command.

  • Start "" "< path_to_firefox\firefox.exe >"URL1 URL2
  • https://TechNet.Microsoft.com/en-us/library/bb491005.aspx

• several e-mail folders appearing not

  Hi all

  from arrival to El Capitan, Mail poses serious trouble me (@Apple: what quality SW?) I was used to something else - before, you really mainly of good quality!). Gmail's mail fails several times a day (ok, I deleted this account), by closing and reopening the mails I have as many windows open as before but all empty. As the mail is so incredibly unstable with my old configuration entirely imported, I try everything again and import only the locally stored email.

  The big question, however and the one to which I am seeking help here is that my imported mailboxes are not displayed. In other words, I try to:

  1. First variant
     1. Reset the Mail (remove containers, AddressBook recent mail, preferences, Mail folder incl. box mailbox dirs, files of envelope, etc.,...) and the mail is clean. Exit the Mail.
     2. Then, as suggested on line, I add a folder stored locally (the Apple Mail folder with several subfolders) and move my old local archive folder to this folder (which replaces this file).
     3. I open mail and allow messages to import messages (it takes between 5 and 10 minutes on my i7 2.8 GHz with 16 GB of RAM), a few thousand emails are counted.
     4. Once the process is complete, the main mail window opens, but only the folder itself, any subfolder, no email appears.
     5. = > FAILURE
     6. Note: If step 2, I do not replace the file, but rather to move the content of this folder (which replaced the two files exisitng there), Mail will be important only 4 messages instead of a few thousand. That apart, everything is the same.
  2. Second variant:
     1. Reset mail (see above)
     2. Choose file-> import.
     3. Choose the folder of old local archive
     4. Mail displays an import process and subsequently a confirmation indicating that imports will be in a folder "imported".
     5. There is no shown any folder (don't I see one in the Finder).
     6. = > FAILURE

  I noticed a similar effect by trying to create local folders, apparently according to their name. For example if I try to create a folder "Archives" in "on my Mac" creation is confirmed, but the record shows ever upward.

  Does anyone have any ideas on what could be the reason? Thank you in advance!

  See you soon,.

  B

  Please test after taking each of the steps that you have not already tried it. Stop when the problem is resolved.

  Back up all data before making any changes.

  Step 1

  If you use iCloud drive, please open the iCloud pane in system preferences. There is a marked checkbox iCloud drive, and next to that, a button labeled Options. Click this button and in the sheet that drops, that uncheck Mail if it is checked.

  This e-mail box is not to be confused with those, also marked Mail, that appears when you open the iCloud preferences window. They have different effects.

  Step 2

  If mail crashes or freezes immediately on launch, try the steps on this page. Sometimes a damaged on a mail server message can be deleted by logging in to the server through its web page.

  Step 3

  If Mail doesn't always start, or if you are unable to take this step for any other reason, go to step 4.

  There are three types of e-mail account: POP, IMAP, and Exchange. You can determine the type of each account by opening the Mail preferences window, by selecting the tab accounts and then click on account information.

  Export all the mailboxes of POP in the office folder.

  If you have accounts IMAP or Exchange and you don't store sent, deleted, and junk messages on the server, export these mailboxes in the same way. You can determine if the messages are on the server by selecting the mailbox behaviors tab accounts.

  Also export all the mailboxes in the category on my Mac.

  You do not have to export the other mailboxes, because messages are stored on the servers.

  Exit the Mail.

  Step 4

  In system preferences, open accounts (OS X 10.9 or later) Internet or Mail, Contacts and calendars (OS X 10.7 or 10.8). Take notes settings for each e-mail account (all types), and then delete the accounts.

  Step 5

  Quit Mail runs. In the Finder, hold down the option key and select

  Go ▹ library

  in the menu bar. Move the following (some may not exist) in the folder that opens on the desktop:

  Application Support/AddressBook/MailRecents-v4.abcdmr

  Containers/com. Apple.corerecents.recentsd

  Containers/com. Apple.mail

  Containers/com.apple.MailServiceAgent

  Containers/com.apple.share.Mail.compose

  Mail

  Note: you do not move the Mail application. You move a folder named "mail".

  Step 6

  Launch of Mail. It will behave as if you have been putting in place for the first time. Go through the process of installation with a single account, using the information in step 4. Test. If Mail works now, recreate the rest of accounting (if you have several) and other parameters.

  Any writing paper custom that you created may be lost. Ask for instructions if you want to keep these data.

  If there is no improvement, quit Mail and put back items that you moved to the desktop, replacing the more recent who can be created in their place. Stop here and post your results.

  Step 7

  If you followed step 3, import mailboxes mailbox that you exported (see article of support related to step 3 for instructions.) Generally speaking, the process takes a few minutes, but this can take hours if you have gigantic mailboxes. In this case, you will be able to speed things up temporarily by adding your file to the list of personal information protection in the Spotlight preferences pane. Remove it when Mail has finished importing.

  The mailboxes that you export should automatically synchronize with the server. Once again, if the mailboxes are very large, their download may take some time, and the network performance will be slower than usual during this period.

  If you skipped step 3, locate in the mail on the desktop folder a subfolder

  V3/mailboxes (for OS X 10.11 or later version)

  or

  V2/mailboxes (for any previous version of Mac OS X)

  Import mailboxes mailbox that it contains.

  Test. If Mail still work, remove items that you moved to the desktop in step 5.

  Reactivate the e-mail option in the settings to iCloud by car, if you have disabled it and retest. If you weren't already the iCloud drive with Mail, there is no need to enable it now, unless you want to.

• Account code of Microsoft verification 2 stage not accepted

  1 day on implementing the new laptop running windows 8.1 entered my e-mail address and password and it asked for the code of stage 2 to introduce to code text but no code received. So I went into recovery mode says that would take 30 days.

  Day 2 tried again and this time a code has been sent a text, but it says invalid code. I tried several times and each time it sends a code but then will not accept the code when it is entered.

  What do I do because I can't this account and it is my main email account?

  Hello

  Usually this problem is due to the incorrect code entry, but as you mentioned that you entered the correct code and still get this question. I would like to know some information about this problem so that we can help you further.

  1. What is the error message or an exact error code?

  2. What are you referring by ' that should I do because I can not get this account?

  3. who are you referring?

  I suggest you to refer to the following Microsoft Help article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Live/ID-support

  For more information, you can consult the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows/two-step-verification-FAQ

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• After the update to 2015.3: Unsharp Mask threshold Slider does not work

  Title pretty much everything said. I worked on a few corrections in an ongoing project after the recent update and images seemed to be returned to its original sharpness. After noodling a bit, I noticed that it is because the threshold slider now don't goes from 0 to 1, basically making it a bypass switch (I got my 2 enabled effect). I've always loved that you could control the degree of color a little noise with the threshold slider and it's a little frustrating that it is no longer an option. Does anyone know if it's a mistake or a voluntary choice by Adobe? Can we say if the Lumetri sharpen slider is a better tool for use even in light of this change?

  I think it's a bug. IMO, it should read 0-255.

  Feature request/Bug Report Form

  Lumetri can be a good choice, its accelerated gpu as Unsharpen mask is not.