Several partners hosted? Problem multiple EDI Sender Id

Similar Questions

• Create notification of a particular hardware for ESXi host problem?

  Hello

  One of our 5.1 ESXi hosts is constantly a hardware problem (with hardware alert status).

  We would like to ask for your opinion

  (1) if we create a notification, should we use 'host' alarm?

  (2) is it possible to send a notification to the staff for this particular host with error alarm "host" other than other ESXi hosts (i.e. send to Tony and Stephen for ESXi host A Harware problem BUT only sent to Tony for another hardware ESXi hosts problem)?

  Your opinion is requested.

  Hello

  No, there is no option to select specific host in a cluster. When you set the alarm, it is fixed for the whole army in the cluster.

• How can I reset my laptop to Nov.2010 - I have problems opening and send emails after January 2011

  I had problems opening and sending emails after January 2011 so I wanted to turn my back on Nov.2010

  Hello

  You cannot use the system back restore more than you have Restore Points. The only one
  Another option would be to return the system to its out of the box, as it was when
  you received. So, it would be better reset your e-mail settings and check with
  the support of your email provider.

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ============================================================

  These can help with system related issues:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =============================================================

  This is Hotmail:

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  -------------------------

  And Windows Mail

  Windows Live Mail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=15

  Windows Live Solution Center - Solutions mail - Mail Forums
  http://windowslivehelp.com/

  Windows Live Mail - mail Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=15

  I hope this helps.

• Problem replying to emails to multiple recipients (sender and several CEB)

  With Windows Live I could forward/reply to an email with multiple recipients in the sender/cc box by clicking on rely all in the taskbar. With Windows Live Mail (2012), it seems that I can only reply to the sender and not not 'everything'... is there a way to do this in Windows Live Mail... ??

  I can assure you that this screenshot is from my Windows Live Mail 2012, build 16.4.3505.0912.

  The changes of Ribbon with the context, as well as with the width of the window. If you select a message from the list of Mail messages and maximize the window, not you still have the four options in the section meet of the Ribbon? If not, repair your installation can be claimed.

• Photosmart 7520 fax problems, how to send multiple pages through this fax printer all in one

  New to wireless, fax, copier, scanner 7520 printer.  3310 previously.  No problem sending faxes with this one.  Have problems with the shipment of several pages on the 7520.  Can someone give me a step by step process.  Suspect I need to use the Document bin vs sdanner screen, but do not know how to proceed and unlike 3310 no guide printed to show how to do this.  Help!  Please, I beg you!

  Hello

  Indeed, you sjould use the ADF to send multiple pages, you can follow the send a fax from the ADF below:

  http://support.HP.com/us-en/document/c03415549

  In addition, you will find the user guide in the following link:

  http://h10032.www1.HP.com/CTG/manual/c03456524.PDF

  Shlomi

• Problems of graphics across several Adobe products on multiple machines

  Has anyone else in the last few weeks have experienced a deterioration in the quality of graphics and display in (only) Adobe products on windows computers?  This includes various powerful Nvidia graphics card with CUDA acceleration on portable computers so that accelerated desktop computers with dedicated Nvidia graphics cards?  Deactivation of gfx acceleration has an advantage in this glitches and bizarre behavior gfx stops but slows down all the machines.  Disabling the gpu acceleration is an unacceptable solution.  Looks like the acceleration/CUDA etc. ADOBE app failed with the most recent update of Nvidia for me?

  ADOBE have never been honest or prompt to own up to the ownership of their mistakes so I do expect a massive amount of obfuscation of stooge ADOBE and other distractions before the technical staff of the merit and value contribute to this topic.  All PCs and laptops are i7 intels and all use Nvidia and Adobe CC and suites CS6.  Lightroom also both version 6 and CC.

  Sounds serious to me?

  Applications to break with any sort of error message like stop working or is not responding... etc.

  There was recent changes in systems, such as updates to the OS.  You can check in Control Panel > program and features > view installed updates option.

  Check the KB which has been installed recently, updates when you are facing problems with the CC apps.

  Re-distributable redistributable Visual C++ version 2015 is installed on the machines?

  Download Visual C++ Redistributable for Visual Studio 2015 of the official Microsoft Download Center

  If you get a crash report like for example, After Effects has stopped working, we need to check with the newspaper the observer of events.

• Restore the snapshots on several virtual machines on multiple hosts?

  I seem to have a mental block.  I need to write a script that will allow me to return to the current snapshot for all VMs on a given host.  I really like he must be all hosts in a specific folder, find all the virtual machines on the hosts, then roll them all would support for previous snapshots.

  I took this to the Administrator's guide:

  $vms = get-vm-location (get-file pods)

  foreach ($vm in $vms) {set-VM - vm $vm - snapshot (get-snapshot - vm $vm - name class_start)}

  For some reason I can't wrap my head around it today.  I know that I have all the elements in my head, can't seem to put it together.  Help?

  That's how I'd do.  It seems that the easiest way to understand.

  $vms = get-vm-location (get-file pods)

  foreach ($vm to $vms)

  {

  # Get last snapshot.

  $snapshot = get-Snapshot - $vm VM | Select - 1 last

  # To return to the last snapshot.

  Set-VM - VM $vm - Snapshot $snapshot

  }

  Tell me if you have any questions.

• CFfile problem multiple sending

  Hello ~

  I use two tags cfinput with type of 'file' in the same shape. They accept different file types, using regular expression validation to check each and have different values of name and id.

  <!--- FORM FIELDS --->
  <cfinput type="file" name="pageLayoutCSSFileUpload" class="inputArea" message="Please upload a .css file." required="yes" size="50" id="pageLayoutCSSFileUpload" validate="regex" pattern="^.*\.(css|CSS)$" />
  <cfinput type="file" name="pageLayoutImageUpload" class="inputArea" message="Please upload a layout image (.gif)." required="yes" size="50" id="pageLayoutImageUpload" validate="regex" pattern="^.*\.(gif|GIF)$" />
  Once the form is submitted, I use cffile to download each one in the same directory, with the same name, but different extensions (a .css and a .gif). The first file, .css, uploads correctly. Then, I get an error with the second tag cffile that the mime type is incorrect, and the file must be in the format of the image/gif. I know that the test files that I use are in the correct format, so it seems that the second cffile tag is by looking at the first file that is downloaded. I don't know how this can happen, the value "file" for each cffile tag is defined by a form variable, which is directly related to these two separate input fields.
  <!--- FORM ACTION --->
  <!--- upload page layout CSS file --->
  <cffile action="upload" destination="#local.pageLayoutsPath#pageLayout_#numberFormat(local.layoutID,000)#" file="#form.pageLayoutCSSFileUpload#" nameconflict="error" result="local.pageLayoutCSSFileUpload" accept="text/css" />
                  
  <!--- upload page layout image file (large) --->
  <cffile action="upload" destination="#local.pageLayoutsPath#pageLayout_#numberFormat(local.layoutID,000)#" file="#form.pageLayoutImageUpload#" nameconflict="error" result="local.pageLayoutImageUpload" accept="image/gif" />
  Does anyone else have this problem? It's complicated to explain, so let me know if this is not supposed... Thank you!
  			 
  According to the docs (and my past experience):
  http://help.Adobe.com/en_US/ColdFusion/9.0/CFMLRef/WSc3ff6d0ea77859461172e0811cbec22c24-73 8f.html
  requires a FILEFIELD attribute, which must be the name of the field in the relevant form in the file in question.  Note: not the form field VALUE, but the NAME of it.
  
  I'm surprised that your code does not have the slightest mistake, FILEFIELD is - appaerently - required.
  --
  Adam
  		   

• Several weird, sudden problems in Multisim, Ultiboard interface

  I have several sudden problems that arose when trying to review a design that changed, I worked on a couple of months ago.

  Multisim 10.0.343 strangeness:

  1. by clicking on a Multisim, Multisim project file opening, but the project file does not open. By clicking on 'Open' Multisim has the same effect. If I manually open the circuit, the entire project opens as well.

  2. I can no longer double click on a component and change the footprint; the button "Replace" is also disabled. I can always change the footpring of spreadsheet view.

  3. the icons for the placement of the pieces have changed to blue squares with black patterns (from grey buttons with color schemes).

  4. multiple drop-down menus in the top bar disappeared ('reports' is the only one that comes to mind, but the list is significantly smaller).

  5 ' transfer' menu has only one option - transfer to Ultiboard 10. There is no rear annotation or annotation.

  6. Select 'Transfer to Ultiboard 10' open the splash screen for Ultiboard and gives me the option to choose a file name, but nothing opens after that. There is no blocking or error - just nothing opens.

  On a separate note: the last time I did a major revision of this circuit, I changed a lot of net names. NET names, however, has not changed; for example, I renamed a node 'Gsyn' to 'Gs '. The 'Gs' appears in the worksheet view and the properties of the net, but 'Gsyn' always appears on the diagram and is not suppressible.

  Ultiboard 10.0.1 strangeness:

  1. the renumbering of the components in the design menu translates into a sort of re-assignment pad, causing many connection errors.

  2. same mistake earlier in the forums without response: after before annotate Multisim earlier, the list of included changes 'edit the existing component XX' for each component in the design, regardless of whether the component has been modified or not.

  3 when you place a trace which is too close to other tracks by my rules of design, I sometimes get advice 'cannot create (1) drop of water ". The program is then suspended until I click on something other than Ultiboard (show Desktop, switch to another program, etc.) When I go back to Ultiboard, the program of the United-grip Nations - but then it works super slowly, no display of updates for a few seconds and zoom in and out in pieces. I have to close and reopen the file to continue working.

  Any help would be appreciated - I'm on a deadline, and both programs are more or less completely unusable now.

  Hello

  Please take a look at the following knowledge base to resolve the issue of Multisim:

  Making gray out

  Reset the User Interface

  It is difficult to tell what is the problem with the annotation to the front without looking at the Multisim and Ultiboard files. If you can, please create a service request to ni.com/ask and send us the files.

  1. When you annotate forward, the PIN does not change is the imprint that has changed.  If the footprint currently on the design before annotate before is different from the PIN that is in your library, when you transfer annotate, Ultiboard will update the fingerprint with that of your database, this may explain what you see.

  2. you need to compare the fingerprint in your schema with what is on the printed circuit, if the fingerprint matches, Ultiboard will get what is on the circuit board to the wide and place a new there.  Take a look at the knowledge base of Unplaced Pieces after annotate with impatience , he can explain what you see.

  3 turn off the tear drop feature (Options > preferences > PCB design) and carry your board without this feature, once you completed the Board of Directors of routing, add the tear drops (design > add teardrops).

• Support for multiple sms sending?

  Hello

  can someone tell me where is the LAG of code to send multiple text messages.

  I am only able to send a single sms.

  private static boolean isCDMA()
      {
          return (RadioInfo.getActiveWAFs() & RadioInfo.WAF_CDMA) == RadioInfo.WAF_CDMA;
      }
      private static final class SmsMessage
      {
          private String _address;
          private String _port;
          private String _msg;
          public SmsMessage(String address, String msg, String port)
          {
              _address = address;
              _port = port;
              _msg = msg;
          }
          public Message toMessage(MessageConnection mc)
          {
              // If the user chose to have messages routed to the inbox (port = 0),
              // we need to specify an address without a port number.
              String addressString = "//" + _address + ( _port.equals(NON_ZERO_PORT_NUMBER) ?  ":" + _port : "" );
  
              TextMessage m = (TextMessage) mc.newMessage(MessageConnection.TEXT_MESSAGE , addressString);
              m.setPayloadText(_msg);
  
              return m;
          }
          public Datagram toDatagram(DatagramConnectionBase datagramConnectionBase) throws IOException
          {
              DatagramBase datagram = null;
              byte[] data = _msg.getBytes("ISO-8859-1");
              datagram = (DatagramBase) datagramConnectionBase.newDatagram();
              SmsAddress smsAddress = new SmsAddress("//" + _address);
              SMSPacketHeader smsPacketHeader = smsAddress.getHeader();
              smsPacketHeader.setMessageCoding(SMSPacketHeader.MESSAGE_CODING_ISO8859_1);
              datagram.setAddressBase(smsAddress);
              datagram.write(data, 0, data.length);         
  
              return datagram;
          }
      }
      public void sendSMS(final String address,final String msg,final String port)
      {
          Thread thread=new Thread()
          {
                  public void run()
                  {
                      SmsMessage message = new SmsMessage(address, msg, port);
                          try
                          {
                              if(isCDMA())
                              {
                                  DatagramConnectionBase dcb = (DatagramConnectionBase)_conn;
                                  dcb.send(message.toDatagram(dcb));
                              }
                              else
                              {
                                  try
                                  {
                                      mc = (MessageConnection)Connector.open("sms://"+address);
                                      if(mc!=null)
                                      {
                                          mc.send(message.toMessage(mc));
                                      }
                                  }
                                  catch (Exception e) {
                                      // TODO: handle exception
                                  }
                                  finally
                                  {
                                      if(mc!=null)
                                      {
                                          mc.close();
                                      }
                                  }
  
                              }
                          }
                          catch (IOException ioe)
                          {
                              updateStatus(ioe.toString());
                          }
                          }
          };
          synchronized (thread) {
              thread.start();
              try
              {
                  Thread.sleep(2000);
              }
              catch (Exception e) {
                  // TODO: handle exception
              }
          }
      }
  

  And I'm the appellant at the bottom of the code.

  for(int i=0;i
  thankx.
  			 
  My problem has been resolved.
  I just put the send method in loop for.
  Thankx
  		   

• Several ESXi hosts and need to share virtual machines

  I'm relatively new to ESXi (although a lot of vSphere, using iSCSI storage) and we are making a number of servers in remote site (with a proxy and utility VM to manage the file/print/dhcp) using ESXi. I have my VMs built on the first box and need to copy them off the coast to the other, but I have problems with the command ADD Storage... I can't seem to get the right information and I begin to think I'm missing something basic. Then...

  (1) can map you to the VMFS from another host esxi?

  (2) If you can, where do you find the location on the second machine information to set up the data store on the first machine?

  If it's important, we use Dell PE of the 1950s.

  Also, while I'm here...

  The size of a pain is to change the IP address or the name of the ESXi host area?

  Thanks in advance for any help!

  VMFS is not supported on USB drives.

  You can use FastSCP for example, http://www.veeam.com/vmware-esxi-fastscp.html

  And Yes, there are several devices that could share storage attached to the network locally, but I don't see them as a solution when you want to just copy existing virtual machines to another host ESXi.

• Several box insert as multiple records

  I'm relatively new to ColdFusion. It's the simplicity, as well as Dreamweaver insert/update/delete assistants, have helped build clean enough applications for database insertion, recovery and deletion and display.
  
  However, I have to be able to insert several selections of boxes as multiple records in a table, and I am running into problems. I guess this sort of thing is the premise of virtually any shopping cart out there, but I can't seem to find any good information on in my 'develop with CFMX manual' or my "Kit of Construction CFMX Web App" book or on the web also. (The only examples for the page of the form or the action page are a static box!)
  
  The basic premise of what I'm trying to achieve:
  
  The user is able to select different items in several boxes. (ITEM_ID)
  This selection is associated with the user. (CUSTOMER_ID)
  The selection is associated with a point in time as a year. (INSTANCE_ID)
  These identification numbers that must all be inserted in a 3 column table expecting integers for ITEM_ID CUSTOMER_ID and INSTANCE_ID
  
  Example of FORM values that would be passed: (147,148,149, 23445, 4) = (3 ITEM_IDs, CUSTOMER_ID and INSTANCE_ID)
  
  Typical error on presentation to insert action page: Number of columns in reading / writing does not equal the number of values (which is normal, I am gathering several values via checkboxes).
  
  How can I insert each box is selected as a separate record in the table?
  
  Such as:
  (147, 23445, 4)
  (148, 23445, 4)
  (149, 23445, 4)
  
  My Code:
  
  Form:
  
  < are method = "post" name = "form2" action = "process_form_action_page.cfm" >
  
  < table >
  
  < cfoutput query = "Stored_Procedure1" >
  
  < b >
  < td > < input type = "checkbox" name = "ITEM_ID" value = "#Stored_Procedure1.ITEM_ID #" > < table >
  #Stored_Procedure1.ITEM_TITLE # < td > < table >
  < /tr >
  
  < / cfoutput >
  
  < /table >
  
  < input type = "hidden" name = 'CUSTOMER_ID' value = '#CUSTOMERS. CUSTOMER_ID #">"
  < input type = "hidden" name = "INSTANCE_ID' value = '#INSTANCE. INSTANCE_ID #">"
  < input type = "submit" value = "Insert record" >
  
  < / make >
  
  
  «"" "Action page:»»"»
  
  
  < cfquery datasource = "ORDERS" >
  
  INSERT INTO PRODUCT_CUSTOMER (ITEM_ID, CUSTOMER_ID, INSTANCE_ID) VALUES)
  < cfif IsDefined "(FORM. ITEM_ID") AND #FORM. NEQ ITEM_ID # "" > "".
  #FORM. ITEM_ID #.
  < cfelse >
  NULL VALUE
  < / cfif >
  ,
  < cfif IsDefined "(FORM. CUSTOMER_ID') AND #FORM. NEQ CUSTOMER_ID # "" > "".
  #FORM. CUSTOMER_ID #.
  < cfelse >
  NULL VALUE
  < / cfif >
  ,
  < cfif IsDefined "(FORM. INSTANCE_ID") AND #FORM. QNE INSTANCE_ID # "" > "".
  #FORM. INSTANCE_ID #.
  < cfelse >
  NULL VALUE
  < / cfif >
  )
  
  < / cfquery >
  < / cfif >
  
  Thank you!

  I'm not not to take good advice. If I was a bit too "hard", I'm sorry... but at least I finally got a good response.

  I realized what I wanted anyway. (Sabaidee, yours was the closest answer you to what I later came up with.) Thanks for the effort, I appreciate it. I will certainly implement your logic of to check if the box is checked).

  What I came up with a solution:

  
  
  

  
  

  
  147
  148
  149

  
  
  

  INSERT INTO MyTABLE (CUSTOMER_ID, ITEM_ID, INSTANCE_ID)
  VALUES (' #Form.CUSTOMER_ID # "," #Form.INSTANCE_ID # "," #Checked_ITEM # ")

  If all of the check boxes are selected, the data is inserted as:

  147, 23445, 4
  148, 23445, 4
  149, 23445, 4

  (I realize that there is much more that can be embellished in the form page and the page of the processor).

• Update Verizon iPhone 5 new IOS 10 problem: cannot receive/send calls. Shop Verizon says it's an update causing Apple to popular phones to crash all day. Any input or advice, please?

  Update Verizon iPhone 5 new IOS 10 problem: I can't receive/send calls. The store Verizon says it's phones a popular causing update Apple crash all day. Any input or advice, please?

  Don't you say no service at the top?

• We had a problem with the sending of an email, he said to send later. My boss began pressing the buttons, and there is now no button send in the window to compose a. Help

  Send no button when composing an email

  When the Send button changes to send later, he indicates that Thunderbird is in offline mode.
  It is taken offline for several reasons. You said that he or she has detected a loss of network connection. Happens frequently on a laptop because the NICs tend to shut down when the laptop goes to sleep.
  There is an indicator online / offline in the lower left corner of the window of Thunderbird. It looks like 2 computer screens. When there is a red cross on Thunderbird is in offline mode.
  You can click on this icon to change state. I suggest you do this next time instead of blindly clicking on buttons that you don't remember.

  The Send button is the Composition toolbar in the window of writing.
  Open a window of writing.
  If you've managed to disable the also menu bar press the alt key to bring up.
  The menu bar, select View-Toolbars and relight the toolbars.

• Pls.Help settle ongoing argument w / my BF. I opened several tabs; He runs multiple copies of Firefox. Which is more effective? There is a big difference?

  It seems intuitive to me that opening several tabs (w / a copy of Firefox running) should be more effective than opening multiple copies of Firefox, but I can't find anything on this issue when I google it or search on your site. What is the best, or isn't it important? If one is better on the other, is there a big difference?

  f it's important, I usually 4-6 tabs open, but sometimes 10 or more. It usually has 4 to 6 copies of Firefox running, w / 1 or 2 tabs.

  I'm tired of arguing, so I would really like to know. Thank you!

  Efficiency has many meanings. Firefox could use a little more memory to use several windows, but the memory is relatively cheap and plentiful on the recent PC. Perhaps more important is the style of each person.

  Please note that there is a difference between open multiple windows in a single Firefox session and execution of several Firefox sessions. In the latter scenario, you would load the executable together several times (and to avoid conflicts load a separate Firefox in each profile), and you would only do this for testing or in other special cases.