Several questions on the machine - wishes to communicate with a service in his machine remotes support to fix

Similar Questions

• Re: Several questions about the recovery of the Satellite L750 features

  I have several questions about the recovery of Satellite L750 features available to it. Any help and answers would be useful.

  (1) when I started the laptop first, he asked me to create a recovery CD incase I need to reinstall the operating system. But he also said that he built in the recovery partition, so therefore, I have to make a recovery cd or not?

  (2) will be the recovery CD is exactly the same as the recovery on the system partition?

  (3) is the partion of CD or recovery includes all the integrated software pre-installed with the laptop?

  (4) also in the device manage management it shows watch partion recovery but it is empty, is it true?

  (5) in the second partition (drive D) system, he has a record with what looks like the recovery of files and folders. Is it safe to move/remove it?

  Hello

  I'll try to provide answers:
  1 - to ensure that everything works perfectly you don t need these discs, but if something goes wrong with the HARD drive you will not be able to do anything. When you have the recovery DVDs, you will still be able to install the recovery image and once again the factory settings. So my advice to you is: create these discs as soon as possible. Use only on DVD-R media and buy products of high quality (TDK or Verbatim).
  2 - Yes.
  3 - Yes.
  4 - No. Don t be confused with this.
  5. in a first time create restore DVD, and later you can do what you want. I put t know which files mean you but don t touch anything before that of the recovery disks to be created.

  In the past, many people have been experimenting with the structure of HARD drive and partitions and later was surprised when installing disk recovery HARD has been damaged. Don t make the same mistake.

  If you have any other questions you are welcome.

• Can't seem to get the printer to the appropriate port to communicate with the printer Lexmark 2480.

  WndOws XP install problems with Lexmark X 2480 printer no cd

  Can't seem to get the printer to the appropriate port to communicate with the printer Lexmark 2480.  Downloaded, but prints blank pages.

  Hello, ColoChick,

  Your question must be posted in the hardware and drivers Forum.  Note the drop-down menus...

  http://answers.Microsoft.com/en-us/Windows/Forum/performance

  Search for drivers for your Lexmark printer.  The complete set is recommended for a full installation.

  http://support.Lexmark.com/index?http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en_US&ProductCode=LEXMARK_X2480&focusedTab=downloads#2

  You can also try the universal print driver

  http://www1.Lexmark.com/en_US/software/UPD/index.shtml

  If possible, contact Lexmark for the installer of physical media (CD)

  Q: How can I contact the Lexmark parts?

  R: customer support is available Monday - Friday from 09:00 - 18:30 AND

  E-mail: * address email is removed from the privacy *
  Phone: 1-877-577-2787
  Fax: 1-800-258-4880

• The Dell printer cannot communicate with the Dell computer.

  It seems that suddenly my Dell AIO 942 printer cannot communicate with my Dell Studio 17computer.  These devices have been the transparent connection until two days ago.  I've set up a restore point, I installed the drivers, unplugged and re plugged 110 s and USBs, used different ports and I still have the same, printer cannot communicate with the State of the computer.   Copy and scan functions are good, Windows Vista operating systems.  How can I find these devices to their previous state of communication?

  Jesse,

  Thank you very much for the detailed information. It really give us a head start trying to solve the problem.

  Please answer these questions to get more clarity-

  (1) what are the other steps in troubleshooting tried by you so far?

  (2) other changes on the computer that I should know about?

  In the meantime, I have you refer to items offered on the Dell website - troubleshooting

  http://www.Dell.com/support/home/us/en/19/product-support/product/Dell-942/research

  You can also have a look at the Microsoft article as well-

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Get back to us with the results.

• If I created my iPad to the text can I communicate with someone who is not an apple product?  If yes where can I start the process?

  If I created my iPad to the text can I communicate with someone who is not an Apple product?  If so, where should I start this process. She is studying how to set up his tablet to the text for me. Is this possible?  Explicit detail please... I am new to this. Thank you.

  To be able to not text on an iPad Apple devices, you need an associated iPhone to the Apple ID, the iPad is using.

  Read the following support document SMS since it deals with sending SMS through continuity.

  Continuity allows you to connect your iPhone, iPad, iPod touch and Mac - Apple Support

  With continuity, all SMS and MMS text messages that you send and receive on your iPhone may also appear on your Mac, iPad, and iPod touch. You can also meet your contacts from any device is closer to you, including your iPad or Mac.

• receiving the message "unable to communicate with the TWAIN device.

  I get the message "unable to communicate with the TWAIN device.

  Hi Kim,

  What is the brand and model of the scanner?

  For now, you can have a look at the link:

  http://nuance.custhelp.com/app/answers/detail/A_ID/3572/~/%E2%80%9Ccannot-communicate-with-TWAIN-device%E2%80%9D-error-message

  http://www.computing.NET/answers/Windows-XP/BRO-MFC240C-scanning-problem/160840.html

  http://www.hwkb.com/Uwe/Forum.aspx/scanner/615/scanner-problem-TWAIN-vs-WIA

  http://forums.techguy.org/hardware/270578-brother-mfc4800-scanner-kicking-my.html

• I want to change my plan of Photoshop at version student creative cloud - can't everyone by live chat and no way to communicate with customer service. Help please?

  I want to change my plan of Photoshop at version student creative cloud - can't everyone by live chat and no way to communicate with customer service. Anyone know how to contact adobe?

  Hi Beansy21,

  Please see the link below to contact customer support:

  http://helpx.Adobe.com/contact.html

  Kind regards

  Sheena

• Several questions using the fixed layout

  I'll try to explain all my troubles and excuse my English.

  Problems for a long time, iTunes Connect, Pages or iBooks author.

  I'm basically a writer of children's books using the EPUB fixed layout as a template. One of my books with (interactive) video I've corrected several times through many contacts with support until I discovered that the problem was that iBooks was unable to read the EPUB 3.0 presentation stops and freezes. Currently, this problem has been fixed.

  In fact, iBooks author nor Pages have fixed layout support. For example, the EPUB models presented in the Pages carry only vertical presentation - where are the horizontal templates for books on photography? iBooks author is made for classic books requiring chapters and sections that are unnecessary for children's books who just needs the blank pages where the images can be copied / pasted with text. It is, but not so simple.

  At the moment I have finished another book and used Epub Checker. Everything was OK, so I tried to download it using iTunes Connect.

  To my dismay iTunes Connect returned with several error messages missing both Epub Checker or inDesign.

  I am here to tell all this issues with Apple tools and how they do not work in practice.

  If you ask Apple to make improvements in its applications, for them to see that you must republish to

  http://www.Apple.com/feedback

• Question of the NEX Time Lapse app with fashion bed and the rising of the Sun.

  NOTE: this problem was first mentioned by me in the other thread about the app of time works do not (a thread "solved").  Wanted to separate this issue in its own thread so I hope this is seen and worked on...

  NEW PROBLEM?  I starts with the NEX - 5R regular automatic mode 'Greens', start the application of time and run in mode 'Sunrise' .  I then begin firing sequence before the sun rises.  It takes about 40mins (I use all the parameters of "sunrise" by default) and when I check the results I see that the exhibition was "locked-in" with the first shot taken.  That means the video created in the device starts properly exposed, gets brighter as the Sun starts to come will then completely saturated white until I see clouds of beautiful Sunrise 'red '!

  What is the way in which the mode of "Sunrise" is supposed to work?  I'm doing something wrong?  I think that with the changes in the brightness of the scene, the camera would be re-meter each image taken on not to bleed the scene as the sun rises.

  Everyone knows this too?

  Moderator: you can report?  (BTW: the Sunset function does the opposite for me also: scene will just completely black too fast as the sun sets.)

  Thank you

  Mike

  At the time of writing, we have no information if there is an update for this application. We can refer to this post and try the steps to see if this will fix the problem.

  If this post answered your question, please mark "accept as a Solution.

• How can I get the CompactRIO 9074 to communicate with TPC-2206 using variables of network?

  Hello
  I have trouble getting the Rio Compact to connect with my touch screen. The goal is to have the CRIO read in data values, update as network variables and then send them to the touch screen where they are displayed. I used the Distributed System Manager to verify that the CRIO updates the network variables.  I also created alias for the CRIO and PTC files to ensure they have the necessary IP addresses included.  I am able to PING the CRIO of the touch screen, so I don't think it's a problem of network connection. This leads me to believe that the CRIO works properly, hosts the variable library and broadcast on the network, but for some reason the touch panel knows not how to retrieve variables.  I have also noticed that when you change the "Properties" of the executable of touch panel, if the "Shared Variable deployment" section contains a box to checked then result is a mistake trying to "run" the executable file on the touchscreen, however if the box is left then repressed the executable runs without error. He still does not update the values of the CRIO however.
  I don't know what else to try, any help/ideas would be really appreciated!
  Thank you
  -Lindsey

  Equipment I use:
  PTC 2206 touch (Windows XP Embedded)
  CompactRIO 9074
  LabVIEW 2010

  Problem solved, thank you for your help!

  For anyone else having this problem in the future:

  As stated previously, the TPC2206 (touch screen) with Windows XP Embedded does not come with the support of shared variable engine installed.  To resolve this problem, I went to NI.com, typed in "LabVIEW Run-Time Engine 2010" in the search box (if you are using another version of LabVIEW, then find accordingly) and clicked on the second link "LabVIEW Run - Time Engine 2010 - (32-bit Standard RTE) - Windows 7/7 64 bit/Server 2003 R2 (32-bit) / XP/Vista/Vista x 64/Server 2008 R2 (64-bit)" "» downloaded, place the file on a USB key (my touch screen is not connected to the internet), connected to the touchscreen, installed the file and restarted the touch screen.

• In fact I have two questions we, the lasso tool are anti-aliasees? And creative Wacom stylus 2 supported on the app's

  iI think to buy the app, but I NEED to know if it will work for me

  PS touch support of the stylus, but the pen only I know that works without a doubt is the S - pen.

  with regard to the lasso tool: it can be done indirectly.

  Make a selection using any selection tool, and then use the option "pen" to soften the edges of your selection.

• The basket does not communicate with PayPal for shipping.

  My client is using PayPal standard at the present time as the only option for a customer to pay for the product and shipping. The customer is charged for the products added to the cart, but is not charged for the shipping costs. PayPal said that the basket is not communicating with PayPal to load shipping. Any ideas? The site is http://www.frecksautoart.com/

  Thank you

  Magdalena

  Hey there. Expedition to the France, you do not Paypal. Do you in British Colombia. On the confirmation page, should be shipping options which is empty, indicating that you have not set this up.
  http://KB.worldsecuresystems.com/search/index.html?CX=014941776559396484648%3Aekxqgmgvzay& cof = DOOMED % 3 a 9% 3BNB % 3 a 1 & ie = UTF - 8 & q = shipping & bc-partner

• Re: Several questions about the Satellite A305-S6825

  I bought the Toshiba A305 S6825 with Vista Home Premium in recent weeks and have a few questions, I hope someone can answer.

  #1-I am only using the Toshiba and wonder why I keep getting this permission UAC to pop up. Is this something that everyone? Can I turn off no problem cause (security)? (I asked this question before, but still puzzled as to the is should or should not allow the UAC.)

  #2-I don't want the Defender made auto update. How can I do a manual update for Defender?

  #3-Pourquoi is so low when its DVD playback? I have the sound at 100%! Or is it something that everybody knows?

  #4-I watched updates for Windows and two in the update/download option appeared. What I have to download them? They (and other optional updates/downloads) will keep appearing?

  #5-I recorded last week and wonder if there is anywhere online, I can tell if I'm registered? Also, how can I find my customer account number? I (believe if you have a Technical Support question, you must enter your account/customer number).

  Thank you.

  (1) there is a new feature in Vista. For more information, please see the Microsoft Vista website

  (2) do you mean the Microsoft Windows Defender?
  If so, check this:
  http://www.Microsoft.com/athome/security/spyware/software/support/howto/default.mspx

  (3) check if all volume controllers would be max. You can find this in Control Panel-> sound control

  (4) Windows updates are always recommended because they fix the bug and the security of the OS lacks

  (5) where do you register this laptop? As far as I know it is a portable American and cannot be registered on the Toshiba European pages.

• I have several questions on the computer.

  Original title: slow and jerky, computer freezing

  I have a computer that is slow, jerky, freezing, the most, can, t get my streaming to work.

  I suggest you try the following steps that should improve the performance of your computer:

  Run ATF-Cleaner and CCcleaner, free shareware available on the internet for download, in your system for broken registry links, clear the cache and temporary internet files etc. You can also increase the size of the virtual memory of your windows to speed up your PC.

  To increase the virtual memory, please follow the steps below.

  1. open computer management.

  2. in the console tree, click (Local) computer management, and then select Properties.

  3. on the Advanced tab, under performance, click settings.

  4. under virtual memory, click on change.

  5. in the drive list, click the drive that contains the paging file that you want to change.

  6. According to the pagination of the size of file for the selected drive, click Custom size, enter the new paging file formats in areas size initial (MB) and maximum size (MB) and then click on set. Click OK.

  Concerning

  David

• I have several questions about the configuration of Windows Media Player XP

  original title: subtitle in WMM as subtitle

  Hi, I use windows XP and when you use WMM under XP, I want that

  • legend is placed as the subtitle to the picture or just scrolling out of bottom right below on the left.
  • How can second thing, I change background for title slides
  • Third legend fonts
  • I can add some animation while going for tranmission

  Hello

  1. what version of Windows Movie Maker is installed on your computer?

  You want to return these items to help.

  Publish a movie in Windows Movie Maker
  Change Windows Movie Maker advanced settings

  Note: The items above are for Vista, but they are also applicable for XP.