Get "DDE server window not responding do not" message when computer shutdown

Similar Questions

• Error: DDE server window not close do not after downloading using FireFox

  I have the same problem.

  on my machine, it happens every time after I used firefox(3.6/4.0/5.0) download whatever it is, when I click on download link firefox is no answer.  then I stop windows I'll see this box.

  Hi ucudbm,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. The problem occurs only after the use of Firefox on your computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails then I would suggest you contact Firefox support for more information.

  http://support.Mozilla.com/en-us/home

• Error code: 800ccc0d, the server is not found, when I try to connect to servers using Windows Live Mail 2011 news

  Original title: 800ccc0d ERROR FIX

  Hi people, I am getting an error ("the server is not found") when trying to connect to my news server. Œuvres mail (hotmail) ok, but I can't connect to one of my two news servers I use (teranews and broadstripe). I've included the error code I have in the title above. I use Windows Live Mail 2011.

  Anyone has any ideas for patches?

  Hi kb3jlc,

  If this problem occurs only with Windows Live mail, you can post the question in the Windows Live community:

  http://windowslivehelp.com/product.aspx?ProductID=15

  Hope this information is useful.

• Error: 'end of the program - DDE server window.

  I am running windows xp sp3. For these last days, I get an error box/message "End program - DDE server window" at shutdown. Only after clicking on endnow 3-4 times, it stops.

  Hello

  Try the methods provided and see if it helps to solve the problem.
  Method 1:
  
  Check out the link and follow the steps.
  Advanced Troubleshooting for shutdown problems in Windows XP
  http://support.Microsoft.com/kb/308029
   
  Disclaimer
  This procedure may involve changing the parameters of semiconductor (CMOS) to complementary metal oxide and modifying the basic input/output system (BIOS) settings. Incorrect changes to the BIOS of your computer can result in serious problems. Microsoft cannot guarantee that problems resulting from changes to your BIOS can be solved. Change your CMOS settings at your own risk.
  Method 2:
  
  You can also try the steps below.
  1. Click Start
  2. Click on Control Panel
  3. Click on performance and Maintenance
  4. Click on Administrative Tools.
  5. Double-click Computer Management
  6. Double-click Services and Applications, and then
  7. Double-click Services.
  8. In the Details pane, click Network DDE.
  9. On the Action menu, click Properties.
  10. On the general tab, in startup type, select Disable, and then click OK.

  Method 3:

  Check out the link and follow the steps.

  Internet Explorer or another program that uses DDE stops responding on a Microsoft Windows XP-based or Microsoft Windows 2000-based computer
  http://support.Microsoft.com/kb/892850

• set update not installed not message when I try to update

  set update not installed not message when I try to update (security update for Windows XP Edition Media Center Edition 2005 Update Rollup 2 X 86 (KB2619340)

  Hello

  1. What is the exact error message you get?
  2. You have installed Service pack 3 on the computer?

  If you have installed service pack 3, then I suggest you to download the update manually from this link and check if that helps:
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28469

  Also check this link for more information:
  http://support.Microsoft.com/kb/906602

  It will be useful.

• reently downloaded updates and now my computer doesn't work well, I get a mozilla does not message every time I try to look for

  After updating my mozilla, I get a message not responding

  Hello bwallace57, your "more detailed system", it seems you have a little suspect for malicious software extensions (GetSavin, MyPoints Score!, MyPoints Toolbar, entry-level consumer).

  You can verify the behavior of firefox in safe mode (safe mode are disable the extension)

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  also, you can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  et Check in the Windows Start menu > Control Panel > programs > uninstall a program, uninstall everything related to the above extensions

  and finally remove the User.js filein your firefox profile folder .

  (The user.js file does not exist by default. If you create the file, forget it, otherwise, please note that some programs to create and write in the User.js file also).

  Thank you

• Error "Update server is not found" when checking for updates

  I'm using VMware Workstation 8.0.5.

  I also had the following problem with 8.0.4 but NOT with 8.0.3: when you try to check the updates, I constantly get an error message:

  'The update server is not found. Check your Internet settings or contact your system administrator.

  There is nothing wrong with my Internet settings. I tried to paste the URL of the update server, i.e.

  https://softwareupdate.VMware.com/CDs

  in Internet Explorer and it appears a page. However all links on the page return an error "page cannot be found '...

  Please notify.

  Kind regards

  M.R.

  As in the image below show 8.0.5 is not yet on the server to update the software! (I even if I told you that in the thread in the release notes.)

  http://softwareupdate.VMware.com/CDs/VMW-desktop/WS/8.0.5/ does not yet exist.

  

• Hyperlink window not Visible when using anchor

  Hello community, for some reason my window for a hyperlink became inactive when using anchors. I had some problems of Muse today and did a re-install without success. Any ideas?

  George

  Hi George,.

  The hyperlink menu appears only after you select an object that can be a hyperlink. If you have selected the object anchor, hyperlink option, it will go away because it is not a hyperlink. If you click on a button, object shape, picture, or text, the hyperlink option should appear on the right.

  I hope this helps!

  Emily

• "Version of server is not available" when you use CentOS 6 connect.pl

  I want to install a new Nagios Plugin which is basically a Perl script that connects to an ESXi host. I had problems so that it connects and I wonder what is happening.

  I tried to connect to the host using the connect.pl of my CentOS 6 box, and I receive the following error message...

  "Version of the server is not available at . https:// " < ip address > / sdk/vimService.wsdl"

  I can manually navigate to this address, but I can't seem to connect using the Perl script.

  I've seen a lot of suggestions on the addition of {PERL_LWP_SSL_VERIFY_HOSTNAME} $ENV = 0; at the beginning of your scripts, but this doesn't seem to work.

  I also tried to type in export PERL_LWP_SSL_VERIFY_HOSTNAME = 0 in the shell, and it solves nothing. Do not know what is happening.

  Perl v5.10.1

  LWP Version: 6.05

  Crypt::SSLeay Version 0.57

  The issue could be with the environment in the Nagios configuration (maybe the value is crushed or not picked up in a later step).

  Try upgrading Crypt::SSLeay.  There are a few versions were some changes have been added to change the management of self-signed certificates (so all the messages on the use of PERL_LWP_SSL_VERIFY_HOSTNAME).  I have not seen the problem with newer versions of the modules.

  For example, Crypt::SSLeay:VERSION = 0.57 is a bit old (~ 2007).  Under OSX, I'm running the 0.64 version and is no longer necessary for the PERL_LWP_SSL_VERIFY_HOSTNAME when running VMware Perl SDK tools.  I also haven't seen on newer Perl install versions (for example 5.16).  0.64 seems to be the current version of the production, and I suppose the upgrade, it might solve the problem.

• The computer does not message when installing driver chipset in Pavillion dv6 laptop 1337tx

  I have Windows 7 Ultimate 32 bit OS installed in my 1337tx Pavilion dv6 notebook. I have downloaded the driver chipset Intel Chipset Installation Utility link in the official driver of HP download page. But whenever I try to install the software it flashes a message "the computer does not have the minimum requirements for installing the software. The Setup will exit. Why this message is displayed, and how can I fix?

  Try the latest driver for Chipset from the following hyperlink:

  http://ftp.HP.com/pub/SoftPaq/sp61001-61500/sp61428.exe

• Windows 7 - "Try Again" error message when you move files, creating folder, etc.

  When I try to move files, create a new folder or move a file, save a file with a new file, etc, I get an error message indicating "Item not found", with a description of "Cannot find this item", "this is no longer in C:\...» "," Check the location of the item and try again.

  

  So far, I have tried the following:

  ·         I have run CHKDSK on the drive. [chkdsk c: r], "CHKDSK" came back without error - the disk is a disk SSD

  ·         I also ran "sfc/scannow", she also returned without error.

  ·         I uninstalled all updates that occurred during the time that this came - tested, the computer and reinstalled them.

  ·         Updates of Windows computer are all up to date.

  I have in case I have to move several files, press the button 'Try Again' to each folder that I move.  This becomes a big problem.

  Any help to fix this would be greatly appreciated.

  Dell Precision M 4800: Processor; Intel Core i7-4810MQ CPU @ 2.80 GHz, 2801 Mhz, 4 Lossnay 8 logical processors. Windows 7 Enterprise (64-bit) SP1 | 16 GB memory | SK hynix SH920 2.5 "512GB SSD hard drive

  I've posted this before, but after a few replies, the thread has been cut and has all the additional answers.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Windows-7-error-message-when-moving-files-creating/4b9e607c-7163-4c04-8a78-29e65cc4bf9c

  Hello Greg,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You did any hardware or software changes to your computer before the show.

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because of the corrupted Windows files or incorrect registry settings.

  To diagnose the problem, check if the problem occurs in safe mode.
  Refer to this article:
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Please refer to the suggestions of Mr Andersen replied on September 4, 2010 and check the problem with folders.
  https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/renaming-folders-causes-item-not-found-error-in/e2cf38c7-9e77-4256-89DE-6308df53d5f9

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• DNS server does not message.

  I get this message to work intermittently. I have to constantly disconnect and reset the router.  At home, I have no problems connecting to the internet (different suppliers).  I ran several cheques malware & virus and can't seem to locate and correct the problem.

  Hello

  (1) is your computer on a domain network?

  (2) have you made any changes to the prior computer question?

  You can perform the following methods and check if it helps to solve the problem.

  Method 1:

  For DNS Server follow the steps below and check for any errors listed in Event Viewer

  (a) click Start, type cmd in the search box and press ENTER.

  (b) at the command prompt, type the following command and press on ENTER.

  "ipconfig/flushdns" (It will show the message empty successfully the cache of DNS resolution)

  (c) at the command prompt, type the following command and press on ENTER. "ipconfig/registerdns" (There is a space between ipconfig and /)

  d) at the command prompt, type the following command and press ENTER: ipconfig/all (there is a space between ipconfig and /)

  The command ipconfig/all command display for all your network adapters, TCP/IP in Windows settings.
  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.

  If this is the case, try this:
  · enough ipconfig at the command prompt and press ENTER
  · ipconfig / renew in the command prompt and press ENTER
  The test again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  Method 2:

  If the problem persists, you can perform the following steps.

  a. click Start , and then Panel.
  b. go to network and sharing Center and then click on change adapter settings.

  c. right-click on Local area connection and select Properties.
  d. Select Internet Protocol Version 4 , and then click Properties.
  e. choose the DNS server to obtain an address automatically , then press Ok.
  f. Select automatically an IP address to get.
  g. Repeat steps for Internet Protocol version 6 as well.

  See also:
  Network troubleshooting event logs to solve network problems:
  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Change TCP/IP settings:
  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings

  Hope this information helps.

• Connection to the server would not check when you configure Outlook Express with Charter Web Mail

  Hello! I call on my Outlook Express is installed on my Windows XP Professional. I need assistance with the configuration of Outlook Express with my Charter Web Mail. Charter, I called and they helped me with the setup but I'm stuck on the last part and it gave me an error on the server. The "connection to the server don't check not" and the Charter was not able to help me through, and they said it's a Microsoft Issue. I need some help here. Please help me! Thank you!

  See here: http://www.myaccount.charter.com/customers/support.aspx?supportarticleid=1241

  There are step by step instructions.

  Steve

• By getting Unattended.XML file not recognized when booting from the USB key dvd

  I have prepared without supervision. XML file and put it in the root of the USB stick and kept Windows 7 OEM DVD player. Mentioned the path of the file catalog in unattended mode. XML. active all USB ports in the BIOS settings. But without surveillance. XML file is not acknowledged at the start. What could be the possible problem here? Can someone help out me?

  Hello

  Please contact the Microsoft community.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/Windows/en-us/82410df7-2e70-47C7-a9dc-7dba7c17fbf8/autounattendxml-will-not-load-from-USB-HDD?Forum=w7itproinstall

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Windows not genuine when it is actually

  I was given a DELL laptop and told to fix an error Validation of Windows.  On problems and not knowing the origin of the Windows license, I bought and installed a retail copy.  After that, I always get the Validation error saying "windows needs to function properly the files have been changed.  I posted the MGADiag below.  Any help would certainly be appreciated.  Thank you.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - 9XRQH - KBTP2-CB9X3
  The Windows Product Key hash: ay + fPj0cH8pCKd/0Jd2M + jCQZn4 =
  Windows product ID: 00371-851-0866951-85694
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {CD679934-7221-4108-9877-EAB455623731} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0x00000000
  Build lab: 7601.win7sp1_gdr.110622 - 1506
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: 2.0.48.0
  OGAExec.exe signed by: Microsoft
  OGAAddin.dll signed by: Microsoft

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Professional 2007-100 authentic
  OGA Version: Registered, 2.0.48.0
  Signed by: Microsoft
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {CD679934-7221-4108-9877-EAB455623731}1.9.0027.06.1.7601.2.00010100.1.0.048x 32*-*-*-*-CB9X300371-851-0866951-856945S-1-5-21-1385559303-3173549030-3282933173Dell Inc.. Latitude E5500 Dell Inc.. A13 20090811000000.000000 + 0006DC73E07018400F804090409Eastern Standard Time(GMT-05:00)03DELL M09 100100Microsoft Office Professional 200712fio8XIAYyOxy3gANYef6q8rmR2U =81605-958-5390297-650651 6F9441764292F7C

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: e838d943-63ed-4a0b-9fb1-47152908acc9
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00170-851-086695-00-1033-7601.0000-2652012
  Installation ID: 020271896956736972733564367723652132946885289951483301
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: CB9X3
  License status: licensed
  Remaining Windows rearm count: 4
  Trust time: 27/09/2012-16:33:14

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000003EFFF
  Event timestamp: 9:27:2012 16:27
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\wat\watadminsvc.exe
  Altered the file: %systemroot%\system32\wat\watweb.dll
  Altered the file: %systemroot%\system32\wat\npwatweb.dll
  Altered the file: %systemroot%\system32\wat\watux.exe
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys
  Altered the file: %systemroot%\system32\drivers\spldr.sys

  --> HWID data
  Current Hash HWID: MgAAAAEAAgABAAMAAAABAAAAAgABAAEA6GF + KnZKJKzWr1LdznAQh7iaZkp0iViMRso =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  REFERENCE DELL M09 APIC
  FACP DELL M09
  HPET DELL M09
  MCFG DELL M09
  _ DELL M09
  ASF!            REFERENCE DELL M09
  TCPA
  M09 DELL SLIC
  SSDT PmRef CpuPm

  You must do a clean install.

  you have a number of questions, the most important is the presence of an activation exploit.