Several RAID, same box arrays

Similar Questions

• grid vs dbconsole for multiple databases on the same box

  Hello

  I need to start the control of several instances that are on the same server.

  Ideally I would be able to cover the case of 4-5.

  How dbconsole compare to the Grid Control in this case? I think the problems of memory - is it possible to have 4-5 dbconsole processes running on the same box?

  I hope that the answer is dbconsole and grid no, because we have put in place on grid.

  Thank you for your valuable answers.

  11.2.0.3

  Red Hat Linux 5

  EBS 11.5.10.2

  DA

  DanA says:

  Hello

  I need to start the control of several instances that are on the same server.

  Ideally I would be able to cover the case of 4-5.

  How dbconsole compare to the Grid Control in this case? I think the problems of memory - is it possible to have 4-5 dbconsole processes running on the same box?

  I hope that the answer is dbconsole and grid no, because we have put in place on grid.

  Thank you for your valuable answers.

  11.2.0.3

  Red Hat Linux 5

  EBS 11.5.10.2

  DA

  Dbconsole is the stand-alone version of grid. Of course it has limited the feature console grid.

  If you have enough memory you can start the console as much as you want.

  Consumption of memory can vary accordingly with the number of controls that you want to perform. (with the agents of the grid or dbconsole).

  Once again, the answer is depends.

  Regs,

  Drew

• GetVPN KS and GM on the same box

  I'm trying to set up a network with GetVPN instead of standard IPSec tunnels and tried to get the KS and GM to be on the same box, is it possible? If so does anyone have an example of a config.

  Thank you

  Andrew

  Hello Andrew,.

  It is my understanding that KS and GM on the router are not supported.

  Kind regards

  Arul

  * Pls note all useful messages *.

• EasyVPN and access VPN remotely on the same box

  Is it possible to have a config EasyVPN and remote access in the same box? I tried to do that and when I do a vpnclient enable command he said remote NAT (outside) 0

  Router IOS or PIX? EzVPN server or client?

  If it's EzVPN server, then it's basically a configuration of remote access also, then Yes, you can certainly have them both, actually just set one up and you get one anyway.

  If it's EzVPN client, then no if it is a PIX and Yes if it's a router, but you must run 12.2 (15) T, see http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t15/ftezvpnr.htm#1155828 for more details.

  Please answer back with more information on exactly what you're trying to do, it is a little difficult to your original explanation.

• Toggle and image with the same box/click on the button

  That's what I'm doing...  When the user clicks a clickbox, first I need to see the surface and when they toggle (or click again on the same box) I show you b.  I need to continue indefinetly every time that they turn this clickbox.

  What is the AA which can help tell the clickbox when show/hide an image?

  Thanks to Lilybiri blog, I found my answer!

  http://lilybiri.posterous.com/?search=toggle+image&sort=

• Random table and present several elements of the array at the same time

  Hi all

  I figured out how to randomize an array and present the items where the user can scroll through the items one at a time. However, I would like to know how I could go for the presentation of the elements of a random array at the same time. To be concrete, suppose I have a list of three words that is Word 1 and Word 2 Word 3. For each user, I'm looking for present all three words on the screen at the same time, but in a different order. If a person can see it on the screen:

  WORD 1

  WORD 3

  WORD 2

  and someone else could see

  WORD 3

  WORD 2

  WORD 1

  Pointers or guides are appreciated. Thanks for reading.

  You say that you already know how random the table, so I won't go into that. Assume that you already have 3 TextFields on screen and called tf1, tf2 and tf3. You didn't say if you use Classes or script code. I'm not a big fan of code of script in AS3, so I'm not good at writing of examples in there. The example here assumes that the class code. It also assumes

  1. You have ' declare stage instances to automatically "off
  2. TF1, tf2 and tf3 exist in all frames of the timeline of the MC that uses this class.

  public class Words extends MovieClip {
      protected var wordSource:Array;
      public var tf1:TextField;
      public var tf2:TextField;
      public var tf3:TextFiels;
  
      //constructor
      public function Words() {
            super();
            //init your wordSource array here
  
            //a Vector is like an Array, but you're very sure what type of "thing" is at each index.
            //in this case, it's TextFields.
            var tfs:Vetor. = Vector.([tf1, tf2, tf3]);
            //loop through each word and each text field and match them up
            var loops = wordSource.length;
            for (var i=0; i		   

• HP Z840: Z840, bunch of several Raid 1 s

  I'm about to implement our new machine to run the modellign software.  We have several sets of disk Raid 1 running windows.  Each set contains modelling data, operating system, software support, etc.

  The raid controller will support us switching on readers when we need to work on a different model?  We cannot intermingle the disks between models (including OS drive).

  Hello

  Am I your question that you want to remove a set of hard drives RAID 1 pair and replace it with another set of RAID 1 hard drives.  Is that a correct understanding of what you want to do?

  RAID meta data are stored on hard drives.

  Unless you disconnect quick material to facilitate installations and removals of hard drive, then you should consider a different approach. If you need in advance with the notion of Exchange, then clearly mark each paired together such as: A1:A2 as the game of 'A' and the other B1:B2 as 'B '.

  I took a pair of RAID drives out of my PC, changed the BIOS to operate not RAID, booted up a different OS and then later returned all back for the RAID mode.  You mileage may vary, but it worked for me.

  Thanks for posting on the forum.

• Specifying the location of the cluster with several folders (same name, different hierarchy)

  I am able to create a cluster and place it in a folder. However, I don't know how to set it for a specific folder when there are several folders with the same name across different hierarchical depths.

  For example, suppose I want to create a cluster in the Department of human resources:

  New-Cluster -Name Cluster1 -Location (Get-Folder HR)

  Then assume that a HR folder is created on several issues, such as the following:

  Datacenter-Corp.-HR
  Data Center-NY-HR
  Data Center-CA-HR
  ...

  I could then create the cluster in the Department of human resources of NY:

  New-Cluster -Name Cluster1 -Location (Get-Folder NY | Get-Folder HR)

  But what can I do if this depth is not standardized or changes, such as the following:

  Datacenter-Corp.-HR
  Data Center-East Coast-NY-HR
  Data Center-West Coast-CA-HR
  ...

  Is it possible to see this full path, regardless of the depth of existing clusters?

  How can I create a new cluster in a file which can be of various depths and have the same name?

  Thanks for any help.

  You can go down the road with the following script.

  At the end the variable $fld contains the final location of the path and you can make a New-Cluster - location $fld

  $folderPath = "Datacenter\West Coast\CA\HR"$fld = $null$folderPath.Split('\') | %{    if($fld){        $fld = Get-Inventory -Name $_ -Location $fld -NoRecursion    }    else{        $fld = Get-Inventory -Name $_ -NoRecursion    }}
  
  $fld
  

• Can someone direct me to resources on how you get TWO esx servers to the same storage array?

  Hi all

  I use:

  2 x Compaq DL380 G2 with 5i

  cards controller 5300 AND attached to the base storage Bay

  STORAGEWORKS ENCLOSURE 4354R RM DOUBLE PORTS U3 (not yet pregnant

  compatibility list).

  The first server appears to see the good in the console of the virtual server storage Center.  The second server will see s for only its own storage room tho.  How do both to see and use the same storage.  The concept is new to me, but trying to learn.  Is there something I need to see the same storage in the virtual Center for TWO machines esx Server?  All IM just not in the right place?  Thank you.

  http://communities.VMware.com/thread/78873 was a previous thread on this can enlighten us. Looks like the 4354R has the bus is divided into 2 x 7 disks and each connector in the back can 'see' 1 of the two buses. The quickspecs (http://h18000.www1.hp.com/products/quickspecs/10624_div/10624_div.html) refer to "... allows access to two areas of storage separated from two different servers. So the first "thing" would be to get two buses attached together inside the unit so that the two connectors on the back see all readers, you must get the endpoint SCSI disabled on the device (you want termination on each 'end' of the cable that is two SCSI adapters in the servers).

  While you might be able to get the 4354R shared between the two ESX hosts, you can also get all the benefits of the shared disk + the possibility of vMotion, etc. by implementing the 4354R known as iSCSI or NFS storage. It also swings you back to something that is 'supported '. To do this, you have two approaches

  1. Fix 4354R on one of the ESX boxes, create a virtual machine that has access to the entire disk on the 4354R and run something like OpenFiler in the virtual machine to 'share' the disk via NFS or iSCSI

  2. Set up a 3rd server if you have one available and run the version of "bare metal" OpenFiler, or install Linux or OpenSolaris distribution and configure NFS and/or iSCSI target.

• OK to combine Robo SourceControl on the same box as RoboHelp Server/DB? Publish on Linux?

  Hi all

  My client is currently using RH7 and publishing a system 700 + subject to WebHelp on a Linux Server (which is physically located in an office of a few States away). They want to upgrade to RH8, start using source code control, implement RH8 Server to capture usability monitoring reports and generate WebHelp Pro. Here is the configuration they are considering:

  Location 1: Several PCs author with customers from RH8 (which will each need to install Robo SourceControl so and point to the correct server?)

  Situation 2: Combined server:

  -Windows Server 1.5 w/JRE, Tomcat 6.0.14 and SQL Server2008 (I'm assuming that but not sure), RoboHelp Server 8

  -SourceControl Robo database

  -All the 'master' source files that are archived to the source code control

  Location 3: Production Server (Linux)

  -Publish to multiple URLS to different audiences, using a different conditional construction of tag/layout combinations

  -Could extend to several locations

  Questions

  1. all the problems with the combined Server?

  2. the features of usability/follow-up report will work with the Linux server, or they do not need to host everything on the same machine as HR Server 8?

  2 they will be able to generate reports of usability/follow-up to their PC to 1 location?

  3. they are likely to encounter performance problems with access and control input/output files to slot 1 with the files that reside on the server combined with the location 2?

  4 production/editing is extremely slow with their current setup (takes 1 hour to build and publish WebHelp on the Linux server instead of 3). Is this likely improves with the introduction of the HR Pro Server/WebHelp?

  5 off topic - are there recommendations 'bigger' for projects? It is 700 + and more, then they are wondering when they should break it in small projects.

  Thanks in advance!

  Katie Carver

  Senior technical Communicator

  Doc-to-You, LLC

  Hi, Katie

  I'm going to answer what I know online:

  Questions

  1. all the problems with the combined Server?

  I have several customers who host the two Adobe RoboHelp Server 8 (Tomcat) and have SQL Server (or Express) of RoboSource Control database on the same physical machine. I'm not a computer expert, but I think you want to look at how much traffic the WebHelp Pro content will receive and how many authors will accede RoboSource Control at the same time. Certainly, you would like to implement in a first test mode.

  In your case, I highly recommend using a 32-bit server to host DB HR server both RoboSource Control.

  Some of my clients have been able to use 64-bit of SQL and RoboHelp Server on a Windows Server 2008 operating system, but others had to return to 32 bits to host a server HR and/or RoboSource Control. There are unknown environments that Adobe has not been tested and therefore they do not officially "support" 64-bit at the moment.

  The other comment I would make is that RoboSource Control is completely foreign to RoboHelp Server, accommodation so the same server would be strictly a matter of convenience, not a requirement.

  2. the features of usability/follow-up report will work with the Linux server, or they do not need to host everything on the same machine as HR Server 8?

  Unfortunately, Adobe RoboHelp Server 8 is supported only on the Windows Server operating system platform. So, I'm afraid that the content of WebHelp Pro could not live on a Linux machine. I hope that this will change in the future as Tomcat itself it can accommodate.

  3 they will be able to generate reports of usability/follow-up to their PC to 1 location?

  Yes. One of the great features of the reports is that the authors (or anyone who you authorize) can generate their own reports in real time from any web browser with the name of user and password correct. In fact, virtually all the features of daily Web Administration can be managed from a web browser. RoboHelp doesn't even have to be installed on this particular machine.

  4. they are likely to encounter performance problems with access and control input/output files to slot 1 with the files that reside on the server combined with the location 2?

  This is one of those answers "it depends." I have no way to really predict how many authors would hit the source control DB at the same time during the workday while thousands of people are also on the content of WebHelp Pro. Frankly, from what you describe, I don't think it will be a problem. But it would certainly make sense to set up a small test to prove it.

  5 production/editing is extremely slow with their current setup (takes 1 hour to build and publish WebHelp on the Linux server instead of 3). Is this likely improves with the introduction of the HR Pro Server/WebHelp?

  They open their RoboHelp projects from a local network share? Hope not. Projects must be open and knitted on a local hard drive. They are perhaps using VPN? Wow. A project of 700 subject? It's pretty small. Who is not really her right. There massive amounts of graphics, multimedia and PDF documents in luggage being published? I can't imagine this measure as long? Or maybe it's a problem of bandwidth/network bandwidth. It's really hard to say. (Unless it's on a network and which could explain it!)

  5 off topic - are there recommendations 'bigger' for projects?  It is 700 + and more, then they are wondering when they should break it in small projects.

  No best size, although obviously performance finally comes at a given time. Break up in separate projects, it's really a matter of convenience. Some creative teams prefer to have segments of content 'possessed' by designated authors even if everyone can get to it, if they wish. Thus, it break into separate projects and using a Parent/child, merged system can certainly help make it easier to manage regardless of the number of subjects. I think if you're going to do in the future in any way, you should start now, because the split, it will be harder it grows.

  My two cents.
  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  www.showmethedemo.com

• Apple pays on several iPhones/same AppleID

  OK, here's my dilemma so. For various reasons, I have two iPhones (work) and the other for personal stuff that exploit the same AppleID. I can add up to 8 cards of different credit and debit cards to each phone (on my personal phone, company on my work phone cards)? So basically is the 8 limit of credit card and debit by AppleID (iTunes account) or the device?

  Hello

  Up to eight payment cards can be added to pay Apple device.

  More information:

  Set up Apple pay on your iPhone, iPad, or Apple Watch - Apple Support

• Microsoft offers Windows Vista that supports Spanish and English in the same box?

  I want to be able to move English to Spanish and vice versa.  Windows offers this program?  That it will be on the same or another partition?

  You must have Windows Vista Ultimate or Windows 7 Ultimate edition. Additional languages are available via WIndows Update. After you have installed other languages, you can switch between them as you wish.

• [SOLVED] config.pri includes several times same file cpp

  Hi all

  as written in the subject I do not know how to resolve this because the .pri file is generated automatically and I don't know if it just searches for .h and .cpp in the project files or it are generated after understands it I used in the code.

  Knowing that I can understand if it is a mistake of mine or a mistake of generator .pri 'simple '.

  Several times, I discovered this .cpp file in the chain of tent SOURCES to solve a linker bug multiple definition...

  Of course, I can comment on the (config.pri) include in the .pro file and copy the .pro content .pri file I can change by hand, but I prefer to understand the reason for this bug to avoid manually changing the .pro file every time that I add something (header or file CPC) in my projects.

  Thank you very much in advance for your answers :-)

  Solved! The problem was caused by something wrong in the way of exclusion in the path option and the symbols of the project property :-)

• The DV6 DV6-6131us-6150us using the same box?

  I recently purchased a DV6-6131us to Fry. I am very happy with it and have decided to make a few adaptations. I intend to buy a sticker for her to skinit.com, but I can't find the 6131 on their list. I is however listed 6150 and looks like he's using the same 'case' as the 6131. I wonder if they do not have the same dimensions. If they do, I can simply use the 6150 to buy my sticker. any help with this would be greatly appreciated.

  Hello
  Welcome to the HP Forum!

  Tithe wrote:

  I recently purchased a DV6-6131us to Fry. I am very happy with it and have decided to make a few adaptations. I intend to buy a sticker for her to skinit.com, but I can't find the 6131 on their list. I is however listed 6150 and looks like he's using the same 'case' as the 6131. I wonder if they do not have the same dimensions. If they do, I can simply use the 6150 to buy my sticker. any help with this would be greatly appreciated.

  They are the same with only minor variations. The differences are the color and material (plastic/aluminium) to the lower part and external coating outside LCD display.  The specifications of your laptop show that your notebook has an AMD processor with an aluminum housing, there is a special part for that one number. I contact skinit.com before ordering and ask them. There is a entry form at skinit.com where you can suggest to your laptop must be cut to order.

  Kind regards
  ERICO

• S130 rebuild with 2 virtual disks on the same disk array

  Hi all

  I have 6 drives 750 GB sata in raid 10 with a s130 controller.

  There is a 100 GB virtual disk and a virtual disk of 2 TB.

  One of the drives has failed, so I replaced it with a new drive.

  I have assigned the new disc on the first virtual disk, and this re-built very well. But he'll also let me assign the remaining space on the new disk on the second virtual drive in the table, it is said that there is no available free disk?

  What can I do here?

  Thank you

  Hi NET1K

  It seems that the hard drive that is not in the disk of your virtual disk group 2 (VD).

  You may need to put the reader that you have assigned to rebuild the first VD and assign it as a global hot spare to rebuild your disk, instead of virtual disk group offline.

  Before doing the procedure reversed, please backup you made recent data.