Specifying the location of the cluster with several folders (same name, different hierarchy)
I am able to create a cluster and place it in a folder. However, I don't know how to set it for a specific folder when there are several folders with the same name across different hierarchical depths.
For example, suppose I want to create a cluster in the Department of human resources:
New-Cluster -Name Cluster1 -Location (Get-Folder HR)
Then assume that a HR folder is created on several issues, such as the following:
Datacenter-Corp.-HR
Data Center-NY-HR
Data Center-CA-HR
...
I could then create the cluster in the Department of human resources of NY:
New-Cluster -Name Cluster1 -Location (Get-Folder NY | Get-Folder HR)
But what can I do if this depth is not standardized or changes, such as the following:
Datacenter-Corp.-HR
Data Center-East Coast-NY-HR
Data Center-West Coast-CA-HR
...
Is it possible to see this full path, regardless of the depth of existing clusters?
How can I create a new cluster in a file which can be of various depths and have the same name?
Thanks for any help.
You can go down the road with the following script.
At the end the variable $fld contains the final location of the path and you can make a New-Cluster - location $fld
$folderPath = "Datacenter\West Coast\CA\HR"$fld = $null$folderPath.Split('\') | %{ if($fld){ $fld = Get-Inventory -Name $_ -Location $fld -NoRecursion } else{ $fld = Get-Inventory -Name $_ -NoRecursion }} $fld
Tags: VMware
Similar Questions
-
Functions defined by the user with several parameters
I set features three following user using "Define."
UF1 takes a single patameter;
UF2 takes two parameters;
and UFX takes two parameters - with the second is 'X' in the definition.
Œuvres F1. F2 is the EVAL of F1 version and it works too. User functions only seem to work fine.
F3, a function of two user settings, produces a graph of NaN.
F4 is the EVAL of F3 version. Note that 'B 'is not replaced by 1'. Also produces a NaN chart.
F5 produces a graph of NaN.
F6 is EVAL of F5. The 'X' is not replaced (even with the ' B' above), and even if it looks like 'X * X', it also produces a graph of NaN.
Is it possible to get defined by the user, with several parameters, features work by tracing the curve?
Hi!, Fortin:
If you download and install the ultimate Firmware with the version of the software: 2015 6 17 (8151), with the number of Version: 1.1.2 - 11, you can trace your examples of definition of the function, with curves and values, without NaN.
-
How to connect the Ombudsman with several bpel process
Hi Please someone tell me how to connect the Ombudsman with several processes bpel in soa 11gAnd here
http://eoracleapps.blogspot.com/2009/11/how-to-call-synchronous-BPEL-process.html
-
Hello
Since vSphere has been provided (I think) the option to open a new analysis of the HBA on every host in the cluster ESXs is available in the GUI if you click with the right button on the cluster, select analyze again to data warehouses.
I have read several threads from people requesting this option in Powercli but have not found a solution for this.
When you do Get-Cluster-name | Get-vmhost | Get-vmhoststorage - RescanAllHBA to do this, the new analysis a host once in the cluster.
Is there a solution for this now in PowerCLI 5.0?
BR
Henrik
As far as I know, there is still no option to launch the new analysis across the cluster in paralel.
-
Initialize the cluster with data types different (lots of data)
Hello
I have data, which are composed of different data types. First of all, I have initialize cluster with these types of data and then "print" to light (photo). In case of photo data carries 8 characters than ja 4 floats. It was easy to initialize, but here's the question: How can I do this even if I have data that look like this (interpreter):
floating point number
name char [32]
Short value [16]
What I create loooong cluster which have a fleet of 32 characters, 16 short films? Or I can create these 'paintings' in a different way?
THX once again
-Aa-
I suggest using the table-cluster and configuration of the cluster size to match the size of your berries, then package these groups together. In terms of storage of LabVIEW, there is no difference between a group of
floating point number
Name1 tank
name2 tank
...
short value1
short value2
...
and a bunch of
floating point number
-> cluster shipped from
Name1 tank
name2 tank
...
-> cluster shipped from
short value1
short value2
So you can use the cluster table to get the right sizes rather than individually create all these values in a single giant cluster.
-
How to connect the cluster with unbundler the help of scripts of VI
Hello
I'm not so known in Labview. I am tring do VI script for you to connect to a digital cluster with a unbundler.
I could create cluster and unbundler. But I am not able to connect.
I have attached the VI and the image of the code.
Help, please...
Thanks in advance...!
Sharon
Same VI compiled to 8.6
Christian
-
Create several folders with several folders in the rapids
How can I quickly create several folders with a specific set of folders in each of them?
for example:Folder1-> test1, test2, test3...Folder2-> test1, test2, test3...Folder3-> test1, test2, test3...etc.I want to create several folders named specifically with an ID I'll specific, and in each of these cases, I would like to have a set of folders.Thank you for your help.Hello
Check out the steps suggested by Steve Winograd and TechHead74 in http://answers.microsoft.com/en-us/windows/forum/windows_xp-files/how-or-can-i-create-numerous-new-folders-instaed/a2a67066-7e97-47b3-aba4-8e8a1a460ca3
Hope this helps you.
-
Create the cluster with existing Virtual Machines
This will seem like an easy question, but I have 3 5.0 ESXi hosts managed by vCenter. We recently purchased a SAN and I would like to set up a cluster, can I do it with running on the existing VMS host computers and then to migrate in the SAN that I have create the cluster?
If the hosts and the BIOS settings are the same there should not be a problem with placing them in a cluster. Displacement of that virtual machine to the San can be made as soon as the hosts are connected to him, it is not the members of classes.
André
-
Is it possible to 'Load Up' the cursor with several elements of 'Place '?
It happens quite often that I have a folder with several items that I want to place. I can go back individually and D command to the folder window to choose the order of the day and then place in the document. When there is page after page of items, it would be useful to be able to select multiple items that will go on a single page and then "spit their" so to speak, of the cursor by repeated clicks, machine gun style. Is this possible to do?
TIA,Ken
Altogether. Select all. If they are not in the right order when you go to the place, use the arrows to scroll and the ESC key to cancel an object.
-
Connection to the AOP with several NIC data store
I have a situation where I need to have the computer that is running the tiara to be connected to two different networks. I have two NIC installed in the machine, NIC A and B NIC, we will call them. The reason for this is that I use Diadem to access the server on a machine of AVL PUMA AO. If I connect to the local network PUMA, PUMA sometimes breaks down, probably something to do with the IP address. So PUMA has need to be on a network that is not a router. My tiara computer must communicate with PUMA, as well as with local shared drives on our corporate network.
In any case, I have the company LAN hung on A NIC and hung on NIC B PUMA network. Tiara fails to connect when the two networks are connected, but connects to the data store no problem when that network PUMA is hung. Any ideas how to solve this problem? It seems tiara is looking for NIC - A instead of NIC B, as appropriate.
For reference, when the two NIC is connected, I can access other than readers, and separate computers to ping on both networks, without problem, is not a connection problem.
Any help would be appreciated.
-Russ
I guess poth NIC have different IP.
-Did you use IP instead of the server name.
-Do you use RPC or CORBA to access the PUMA Server?
-What version of DIAdem.
You can create a log file when the connection has failed?
Greetings
Andreas
-
Easiest way to convert the cluster with named variables table?
I have a table of variables, I essentially unbundle this table of named variables.
I believe that the only way to achieve this is to convert the cluster table (not to mention that the deletion of each item one by one)?
Is what I've done below the best way to do it? seems a little weird to unbundle and rebundle by name.
Comments appreciated.
Altenbach says:
Maybe a simple catalogued the cluster would work.
Of course, it does!
-
Open the files in several folders and run
Hello guys,.
I have several files in several folders, I would like to know is it possible to automatically open the files in folders and execute action defined in PS.
Example: I 1-folders12 (folder name will change regularly), I have 5 files in folder 1, 10 in folder2 and 7 in folder3,... and so on.
I need a script to open the files one by one and perform the action to the PS and nearby, once all the files are processed in the Folder1, the script should search for folder2 and until the last folder. Is this possible? looking for consultant.
This should be possible with just using Image Processor, which comes with the PS. Just check the box that says to all subfolders.
-
Committing the order with several UoWs recorded in the external controller of JTA?
Hello
Our architecture deals with the J2EE application using multiple mappings (several sessions and UoWs).
I would like to know if the order of the UoWs are saved in the controller of the outer transaction is the
even order the UoW are engaged when the validation of the JTA global transaction? Is it guaranteed by TopLink (or spec JTA)?
Kind regards
gerardceI don't think that there is nothing specifying ordering in the spec. This kind of request of documentation are better serve as a test.
-
Bug in several windows in the finder with several screens
When you use finder on several screens (with separate spaces) there is a problem when you enter fullscreen.
Steps to reproduce:
1. open finder on a screen.
2. open another window in the finder on a different view.
3. full screen or finder window (any). You will be able to observe a Visual problem where the finder window that you do not use maximizes and enters full screen then go back to normal, just before the finder window you use between full screen.
4. at this point your finder window full screen is missing in the top navigation bar. To reveal it, open your mission control and the space finder-click and you will see. Basically, the navigation bar is on the finder space expanded while the rest of the finder is on office space.
5a. If you try to exit the full screen, your finder window will freeze.
5. before going back to full screen, if you go to the mission control and drag your space viewfinder on the screen where your other window finder is currently on, you will be able to leave the full screen and the finder window will not freeze.
Cause of the error:
Still, the problem occurs if the following conditions are met:
-You have two or more finder windows (if you have only a window of finder, you can always expand it without any problem)
-You maximize a window of finder, and it's the only finder window on that office space
For example, if you have three screens and you have 2 1 1 finder windows in offices respectively, you will encounter the error when you maximize the window of the solitary finder on the monitors of 2nd or 3rd. Maximize a window in the finder on the first monitor has no questions.
Please try to reproduce. I hope that it is easily reproduced on any machine and I hope this will be fixed as soon as possible.
Can not repeat to aid by end 2013 15 "rMBP and Asus 24" external display connected DisplayPort cable.
-
This was happening with FF 3 before moving on to 4 and not going on with FF4.0 until the 4.0.1 update has been applied, the first time, he ran. Same problem on another computer running FF3, so maybe a related problem of the extension.
If I have three windows open and close the third, I don't get it. Only when two are open and one is closed. I could have three, close one, then the second and get the prompt.
Non-disabled extensions
Adblock more
BugMeNot
Cooliris
Download Statusbar
DownloadHelper
DowntThemAll!
FireGestures
HTML5 Extension for Windows Media Player
HTTPS everywhere
Java Console
Download the PDF
Session manager
TinEye Reverse Image Search
YouTube how SnobPeople with disabilities
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
Maybe you are looking for
-
Why need a license to play my downloaded cd.s?
My lap top was repaired earlier, and since his summer in return I can, t play my music without a 'license' it's never happened before he went to fix everything we know how I can put this right please.
-
Hi, I recently installed a series of updates to security for vista sp2 final, but now I've lost my Internet connection... I can get into safe mode with network and get on this path ok but obviously not ideal. I can see the latest patches from the Con
-
No email exchange due to security settings
On my activation email exchanges Z3 my work was not a problem.When you try with on my new Z3 + I get a respons security settings prevent the creation of the account.I tried with and without a PIN. What can I do? Thank you for your help advancs
-
unidentified network in windows 7
Dear now I use windows 7 whenever I boot computer and internet does not work correctly have problem, then check the property source network this 'unidentified network '. After the network connection disabled Local after activate then start net networ
-
Illustrator is not download files access cloud creatives...
Im trying to access the form of adobe Illustrator files. None of the files are for download in my library. It is said: something was wrong initialization library creative cloud?