several slides do not advance with going to the next slide or continue

Similar Questions

• I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?

  I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?

  You can check the Advanced Interaction Panel? You have a note attached to the interactive objects in the simulation? If so, check the desired option Quiz, more specific preferences.

• My iPhone with iOS 9.2.1 5s is deleting random contacts.  This happened for several months is not just with the last update of iOS.  Any suggestions?

  My iPhone with iOS 9.2.1 5s is deleting random contacts.  This happened for several months is not just with the last update of iOS.  It deletes recently used contacts and removes also from my iPad.  Any suggestions?

  That you synchronize your contacts with? A decision-making application supported on the computer, a Cloud Computing service?

• The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

  This morning when I checked my system log, it was filled with errors, while saying:

  The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

  A quick search of the register revealed that it identifies Windows Management Instrumentation (WMI). I looked, and indeed, he was arrested. When I tried to start it, I got the error message:

  Could not start the Windows Management Instrumentation service on Local computer

  Error 193: 0xc1

  All the help I can find on the subject assumes that the application does not have the required permissions. Nothing has been deliberately changed. I tried to do a restore of the system of the last days at several checkpoints and received messages that it could be done. So, I checked all the required permissions were still in place.

  My operating system is XP Pro SP3 with all updates applied.

  So, I have to say that something broken, perhaps in the framework of an automatic update or another. Now, when I try to run Microsoft Update, it just hangs.

  Maybe there is not enough information here, but I'm looking for more help on troubleshooting. I have the system tools enough to report all the news of trial if necessary.

  Thank you

  Don

  Even if I had run a chkdsk/r on my system disk and he come clean, I have decided to launch a sfc/scannow and found 3 DLLs that were somehow not original. Once these have been restored, the errors have stopped (so far). While it was only 30 minutes, it is the longest, I went all day with no error message. I'm keeping my fingers crossed.

• How to set a fixed length scheme, composed of several documents of different types, with details of the header and footer in points 22 and 23, namely having 10 for 20 for detail header and 30 for the footer

  How to set a fixed length scheme, composed of several documents of different types, with details of the header and footer in points 22 and 23, namely having 10 for header, 20 for retail and 30 for the footer.

  Here is the sample file

  DDWTYBILL13092502572 1000000112\\NHLSFS\ORACLE\ORACLE\BILLING\VERIFY\ 2013/09/25 01:19:08 BILLEND

  DDWTYBILL13092502572 2000000212PRIVATE PRIVATE STY5572142 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731543 Suspect 91TB? (AC) EMPIEEM A2 Z03.0 05-AUG-201305-AUG-201324-SEP Z03.9 - 2013FEND 113,60 TYGERBERG HOSPITAL Ward

  DDWTYBILL13092502572 2000000312PRIVATE PRIVATE STY5572149 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT 91 NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731548 empyema GMP A2 Z03.9 05-AUG-201305-AUG-201324-SEP Z03.9 - 2013FEND 113,60 TYGERBERG HOSPITAL Ward

  DDWTYBILL13092502572 2000000412PRIVATE PRIVATE STY5572351 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731584 Suspect 91TB? EMPIEEM? CA Ward HOSPITAL TYGERBERG Z03.0 Z03.9 A2 05-AUG-201305-AUG-201324-SEP-2013FEND 113,60

  DDWTYBILL13092502572 2000000512PRIVATE PRIVATE STY5572352 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731585 Suspect 91TB? EMPIEEM? CA Ward HOSPITAL TYGERBERG Z03.0 Z03.9 A2 05-AUG-201305-AUG-201324-SEP-2013FEND 113,60

  DDWTYBILL13092502572 2000000612MAJOR MAJOR STY5577530 010700 INV 12ZTYG000009 02-AUG-20130000010472 STY STY 1100611006MGIT 91 NNS ZOZI, S, SIYAMBONGA 27 March 2010 TYG D3 DR MARCELIN 5602181 113799662 TB731663 lymphadenitis Ward D3 TYGERBERG HOSPITAL I88.9 Z03.9 07-AUG-201307-AUG-201324-SEP H1 - 2013MEND 58,52

  DDWTYBILL13092502572 2000000712MAJOR STY5577537 MAJOR 010700 INV 12ZTYG000009 06-AUG-20130000010472 STY STY 1100611006MGIT 91 NNS DLAMINI, N, SIMON TYG 9 October 1976 F1 DR WZESE 5602181 135524676 TB731666 Suspect Ward TB F1 TYGERBERG HOSPITAL Z03.0 Z03.9 H1 07-AUG-201314-AUG-201324-SEP - 2013MEND 58,52

  DDWTYBILL13092502572 30003034120000003032END

  You can create a nXSD the use of the Native Format generator and advanced search attribute is used to read values to a specific position and use it as the choice. You can find an example here

  http://docs.Oracle.com/CD/E11036_01/integrate.1013/b28994/NFB.htm#BGBBAJFD

• Error in windows 2003 Standard Edition with Service Pack 2... The server {00024500-0000-0000-C000-000000000046} is not registered with DCOM within the required time.

  Could someone fix for the error below...

  OS: Windows 2003 Standard Edition with Service Pack 2...

  Event type: error
  Event Source: DCOM
  Event category: no
  Event ID: 10010
  Date: 08/08/2012
  Time: 10:00:31
  User: n/a
  Computer: BP1WHIAP011
  Description:
  The server {00024500-0000-0000-C000-000000000046} is not registered with DCOM within the required time.

  Hello
  For assistance on this issue, you can post your question in the Technet Forums.
  http://social.technet.Microsoft.com/forums/en-us/categories/

• the server is not registered with DCOM within the required time.

  I use Windows 7 Enterprise Edition (SP1). It works fine while working on it directly. But when I try to make the remote access connection in the machine it is restarted after a certain time (1 hour or more). I found error in the following system logs:

  Log name: System

  Source: Microsoft-Windows-DistributedCOM

  Date: 01/04/2013 18:41:34

  Event ID: 10010

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: xxxxxx.yyyy.net

  Description:

  The server {AAC1009F-AB33-48F9-9A21-7F5B88426A2E} is not registered with DCOM within the required time.

  The event XML:

   

     

      10010

      0

      2

      0

      0

      0 x 80000000000000

     

      10589

     

     

      System

      XXXXX.yyy.NET

     

   

   

      {AAC1009F-AB33-48F9-9A21-7F5B88426A2E}

   

  Hi Varun,

   

  Thanks for posting your question in the Microsoft Community.

   

  The question you posted would be better suited in the TechNet Forums.

  I suggest you to ask your question in the below link:

   

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  I hope that the information above helps you.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  After hitting my head against the desk to repeatedly create packages, try on different computers I have finally found a solution.

  These packages have been copied on an external drive, if I try and install from the external drive, which is a common practice, it fails.

  If I then copy this file pkg from the outside, to the computer I install, then run it, it will to and moved very well.

  That is mind-boggling stupid, because it's rare that you have to copy the file into any computer, it is less always installed off the coast of externally, and many people in the company are pushing on the network and the management of the suites so there is a serious problem in Adobe package manager if this is the case where it cannot manage the Middle installed offshore.

  I hope that if anyone else is having problems so it suits.

• How can I cancel your subscription to Adobe? Because it does not work with me on the computer is

  • How can I cancel your subscription to Adobe? Because it does not work with me on the computer is
  • 
    

  Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday

• Someone else to get errors 'droplets could not communicate with Photoshop"since the upgrade to LR2015 CC and CC 2015 PS on Windows?

  Someone else to get errors 'droplets could not communicate with Photoshop"since the upgrade to LR2015 CC and CC 2015 PS on Windows?

  I have a droplet which stretches from digimarc on my images.  Its working well for the past 2 years.  However the most recent upgrade to LR2015CC and PS2015CC its broken.  I did go back and manually install the digimarc plug-in (because it is no longer installed by default) in PS 2015 CC.  The drop works well when it is run within PS2015 CC however when I try to run it as part of "Post-processing, after export" in CC LR2015 I now get an error message "droplets could not communicate with Photoshop.  It worked in the latest versions of LR and Psalm

  Anyone have this same problem?   It is a technique of very popular workflow for those of us who use digimarc.  I wonder if anyone else has encountered this and has a fix.

  Thank you

  Work around is to install the OLD PS CC2014 and restart the computer.  Then it magically connects to CC2015 PS without errors.

• How I continuously loop frames with pause for 20 seconds in each image of the scene even without going to the next scene?

  How I continuously loop frames with pause for 20 seconds in each image of the scene even without going to the next scene? There are buttons for other scenes in these images. The below works well until I got to the last frame of the scene, then he goes to the next scene and plays. How can I make one loop continuously.

  Stop();

  var: timer = new Timer (20000,0); / / <--

  timer.addEventListener (TimerEvent.TIMER, timerHandler);

  Timer.Start ();

  function timerHandler(event:TimerEvent):void {}

  this.nextFrame ();

  or if you want to jump for example 5 executives

  this.gotoAndStop(this.currentFrame+5);

  }

  Thanks for any help.

  If you want to stop your timer, use the stop() method:

  Timer.Stop ();

  PS when you use the adobe forums, please check the useful/correct, if there is.

• When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After you have chosen a selection of clip the first clip that I post on the time line is equipped with sound. then the next

  When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After choosing a selection of clip, the first clip that I post on the time line is equipped with sound. then the next clip, I chose (not dose issue)
  will have no sound. (but in the contact box everything its fine) Why is this?

  Why is this?

  Because you forgot to patch source audio track.

  

• check if the image is loaded before going to the next loop

  is this a 'valid' method to check if the current image is loaded before going to the next loop/image?

  var mcPics = _root.createEmptyMovieClip ('mcPics', _root.getNextHighestDepth ());
  mcPics._x = Stage.width + 1;
  for (var i = 0; i < pic_arr.length; i ++)
  {
  ["mc" + i] mcPics = mcPics.createEmptyMovieClip ("mc" + i, mcPics.getNextHighestDepth ());
  loadMovie (dir + pic_arr [i], mcPics ['mc' + i]);
  
  While (mcPics ['mc' + i] ._width) continue;
  }

  to do this, you can't even load them in order.  You can just count how many have successfully loaded:

  var mcPics = _root.createEmptyMovieClip('mcPics', _root.getNextHighestDepth());
  mcPics._x = Stage.width+1;
  var mcl:MovieClipLoader = new MovieClipLoader();
  var mclLO:Object = new Object();
  mclLO.onLoadInit = function(target){
       loadNum++;
       if(loadNum==pic_arr.length){
            //start your animation
       }
  }
  mcl.addListener(mclLO);
  var loadNum:Number = 0;
  for (var i = 0; i		   

• When I click on the Accordion widget it goes to the next slide.  I just want to let the 'response' to the show and then go on the following does not slip

  I'm building an Accordion widget with four bars.  When I saw it, and then click the 'question' the 'answer' is displayed for a second but then moves to the next slide and does not give me the time to click on the other bars.

  I compared to another Accordion widget that works fine and the sync settings are the same but works perfectly.  Any suggestions?  Thank you

  Well, I kind of thought to it.  I have 'next' and 'back' buttons on all other slides and when I copied them to all of a sudden it does not automatically go to the next slide.  No idea why, but heck, it works.  Thanks for the comments

• I tried several times to set up an email account with Thunderbird, but the next time I start the computer and start Thunderbird, no account is displayed.

  I bought a new desktop PC with Win 8.1 and installed Firefox and Thunderbird.
  Then, I tried to set up the e-mail account manually (in IMAP) following the instructions here: https://support-en.upc-cablecom.ch/app/answers/detail/a_id/22 , but can't set the mail server outgoing smtp correctly (I could receive mail but not send them). Subsequently, I deleted this account. Then, I started the automatic mail with UPC Cablecom under the http://www.upc-cablecom.ch/content/dam/www-upc-cablecom-ch/Support/executables/upc-cablecom-email-assistant.exe link tool and he did successfully set up the account, however, because a POP3 server account. As I was not happy with it, I deleted the server of incoming POP3 mail (and lost the e-mails received, of course...) and retried a manual installation. In doing so, I got an e-mail account IMAP incoming more two outgoing SMTP server (comparing them, I also understand the configuration error that I had done the first time). I then deleted the manual as SMTP server the automatically the installation server worked correctly.
  In this context, accepting them and sending E-mail worked OK. However, the next time I started the computer, the e-mail account disappeared and Thunderbird was asked to set up a new account again. I have successfully set up manually once more, but the same problem resurfaced at the next startup, the e-mail account was gone...!

  Thank you in advance for your help!
  Maxonce

  Verify which profile is used.

  AppMenu button - help - troubleshooting - profile directory - Open Directory information

  Your profile folder should open in Windows Explorer. What is the location of the profile?

  Restart your computer and repeat the steps above. The profile folder has changed?