SGA size limits

Similar Questions

• Photoshop Camera Raw Size Limitations

  I am producing great panoramas. These panos were usually huge file sizes. Photoshop Camera Raw seems to have size limitations. Is this true? If so, is there a way to get around this to edit large files in Camera Raw?

  Thanks to all for the replies. Needless to say it was disappointing. It seems that Camera Raw and Lightroom times have file size limits and are NOT conducive to editing of files large panos. Any suggestions on "get autour. Someone at - it a channel of communication with someone at Adobe who may have an ear to this topic? Any workflow suggested for large panos file?

  I'm proficient enough in both Lioghtroom and Camera Raw, but looks like I'll need to go into another lane for panos of large file size. Too bad.

• Cloning of SGA size post

  Hi all

  I cloned 11.5.10.2 ebs however after cloning, I discovered sga size does not match the size of sga prod.

  How could I change size to prod sga sga.

  I use rhel 5.2 with ebs 11.5.10.2

  Thank you

  Hello

  Please confirm that you are using a 64 bit OS.

  If you do, then edit the file /etc/sysctl.conf have entered:

  kernel.shmmax = 4294967296

  Save and exit, then run the command 'sysctl Pei' and try to restart the DB.

  If this does not work, please do:

  1. ensure that RAM upgrade is detected by the program: free - m.

  2 attach the output of the following command after the DB of the supply environment file:

  Cat $ORACLE_HOME/dbs/init$ORACLE_SID.ora | grep sga_target

  Thank you &

  Best regards

• Satellite 5100-201-size Limitation of HARD drive

  Hello

  I have a Satellite 5100-201 P4 - M 1.6 Ghz with 30 GB IDE HDD and 1024 MB of RAM. I use my 'old' Satellite only for music (the largest sound found on laptops!) but my HARD drive got a little weak.

  So my question is if there is no limit on the size of HARD drive for this laptop. I would buy an IDE 120 GB or 160 GB HDD at 5400 RPM and 8 MB Cache. If this is not possible, I can also take the 80 GB of HDD (another puts it on say works), but liked better!

  Thanks for your help!

  Greetings,
  Fab

  Hey Buddy,

  I think that the maximum capacity of the HARD drive would be 120 GB because the laptop has a limitation of LBA 28 bits. This means that only the hard disks up to 128 GB usable 120 GB would be the maximum. 5400 RPM and 8 MB cache are ok.

  By the way: it of Nice to read that you are always so pleased with old Satellite 5200 :)

• WMP 11 library size limitations

  Is it possible to increase the size limit of file of 1 GB for the database of WMP 11 "CurrentDatabase_360"? wmp file

  After a bit of research online, it seems that this limitation is the reason that prevents the addition of music files over to my WMP WMP library.

  If there is no way to increase this limit, do anyone know if WMP 12 will have the same restriction?

  Thank you

  Gary

  Hello

  ·         What operating system do you use?

  ·         Do you have an error message when you try to add the music to the Windows Media Player library?

  There is no limitation for adding music to the library in Windows Media Player 11 or 12. This problem can occur because the Windows Media Player library database is corrupted.

  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  1. exit Windows Media Player.
  2. click on start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.
  3. Select all the files in the folder and then click on Delete on the file menu.
  Note: You don't have to remove the folders that are in this folder.
  4. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  1. exit Windows Media Player.
  2. click on start, run, type % LOCALAPPDATA%\Microsoft, and then click OK.
  3. Select the Media Player folder, and then click on Delete on the file menu.
  4. restart Windows Media Player.

  For more information, see these links:

  Add items to the Windows Media Player library:

  http://Windows.Microsoft.com/en-us/Windows7/add-items-to-the-Windows-Media-Player-library

  http://Windows.Microsoft.com/en-us/Windows7/sync-manually-in-Windows-Media-Player

  Please respond back with the State of the issue and let us know if you have any questions.

• Size limited on WAP2 request?

  Hi, I'm working on an application, and I recently added features of network discovery using the Network Diagnostics tool and guide of peter_strange as a resource. At this point, you can change my application to gracefully between Wifi, WAP2, MDS and direct TCP. However, I run into a weird problem with WAP2. My application communicates with an API via JSON, and sometimes the server will send back large ASCII text result sets in the 32 k Stadium. When you use the Wifi, my request has no problem recovery and display results based on these data. However, when I use WAP2 which the connection devcideside suffix = true; ConnectionUID = WAP2, it throws an exception on the result of any decent size sets. To be precise, I get:

  java.io.IOException: no data to read.

  If there is a limit on applications for WAP2, would he imposed by my network provider (T-mobile), unit or elsewhere?

  This "no data to read" exception is generated in terms of * your * code.

  I think you should make debugging more this "read" routine and check the values of the length as you expect.

  This "8192" limitation does not exist, AFAIK.

• InputStream/transfer/file upload file size limitation?

  I try to use http 'POST' to download a large file whose size is about 30 MB.

  I cut it in small pice like 1 Mb. And try to send them on httpconnection.

  Both Simulator and real phone do not work, I got OutOfMemory error.

  Also I tried to use the browser to download, still does not.

  Y at - it no limitation of size for file transfer via http?

  Thank you.

  LAN

  Moreover, myFileStream.read use InputStream.read method.

  myHttp.open(theServer);        myHttp.setRequestMethod("POST");        myHttp.setRequestProperty("Content-Type","multipart/form-data; boundary=" + BOUNDARYKEY);        myHttp.openOutputStream();
  
          myHttp.write(getPostFormHeader());        if (myFileStream != null){            int fileSize = (int) myFileStream.fileSize();            if (fileSize <= 0)                System.out.println("Invalid file size!");
  
              int off = 0;            int len = 0;            int i;            byte[] myBuf = new byte[BUF_SIZE];            for (i=0; ; i++) {                if ( (fileSize - off) < BUF_SIZE)                     len = fileSize - off;                else                     len = BUF_SIZE;                if (len <= 0)                    break;                myFileStream.read(myBuf, 0, len);                myHttp.write(myBuf);                off += len;            }            }        myHttp.write(ENDMESSAGE.getBytes());        myHttp.flush();        return myHttp.getResponseStream();
  

  Hi dream,

  For a load of 30 MB to succeed the phone, he'll need 30 MB successfully create the PUBLICATION on the server information, it is then the main cause of the "OutOfMemory" error, the problem behind this error is that the "Ras" on Http/sConnection command deletes not really the send buffer file Info. So independently using pieces of 1 KB or 1 MB buffer memory is still going to fill and eventually cause an OutOfMemory exception. One of the two way around this is to split the file into smaller files; Send to each of them through his OWN POST and then rebuild Server; A nice way to fix this is to divide the file in archive zip/rar/segments and then simply "extract" the new server-side.

  If you are interested by this unfortunately and costly route, you can find the article relevant here this article refers to the download instead of download, but the same logic applies.

  The second option is to use a datagram Socket connection / (rinse them properly) and get them to do the HTTP traffic for you.

  Concerning

• Attachment size limitations Surface RT

  My RT download attachments larger than 1 meg.   Is there a setting that increases the download size allowed?

  Cordially Freddo.

  I think it is a restriction by your email provider (or your local ISP).  Mine did, but they have a ceiling of meg 5.  The machine itself has no limits to downloads.  You need to get with a different mail service.

• Elements 14 64-bit Windows has file size limits?

  I'm assuming that a 64-bit version would transcend the limitations of size of file for 32-bit versions. In particular, larger than the linear dimension of 30 000 pixels images for items 14 64-bit support?

  Hi Steven,

  Accept your point that affected products section is obsolete in this KB. Thank you for pointing out that we get updated.

  64-bit support was introduced in PSE13 and the limit on the size of the file remains unchanged with that. PSE13 and 14 are supported a maximum of the size of the file 30kx30k.

  I hope this helps.

  Thank you

  Catherine

• replication vSphere size limits

  I looked all around the specific limits to the size of a virtual machine that can be protected through MRS. w/vSphere replication, but I do not see these documents. I saw the 5.0.2 release notes claiming to be able to manage VMDK > 255 better now.

  I initially used 5.0.1 and had a lot of problems trying to synchronize a 3 TB 2 comments, 1.5 to VMDK, I'll finally little works, but it took days and multiple attempts to accomplish.

  Now a customer asks 16TO to be protected. Do not know how the distribution of the VMDK will be, but I came with a few raw numbers ranging from an initial synchronization ranging from 12-21 weeks.

  someone at - it an experince with large capacity disks a vSphere Rpelication?

  Hi Robb,

  The maximum disk size for vSphere replication with MRS 5.0.2 is 2032 GB.

  Thank you

  Stuart

  Docs SRM

• Harvest size limiting camera raw 6.5

  When I load a raw image in camera raw 6.5, CS5 - truncation tool suddenly does not work correctly

  It limits the size of the harvest I can do.  I used to be able to surround the entire image with a culture and then change it on all sides if necessary.  But now, for some reason, it doesn't let me capture the entire image - don't let me highlight about 3/4 of it.  This is true for all my raw images - even those who had previously no problem

  any ideas?

  Have you thought to update Camera Raw 6.7, which is the latest version of Photoshop CS5?

  Applications of camera Raw compatible Adobe

  Inside, Photoshop, help - updated...

  -Christmas

• NFS VMDK size limitation?

  What is the limitation of the size of a single VMDK carved into a NAS data store? I realize that the default out of the box VMFS data store is created with 1 MB blocks so a limit of 256 GB. But what about a NFS datastore? The default seems to be 256 GB, but I wonder if there is no setting on the side of NFS as there are on the side VMFS with changing the block size.

  I was digging around and I can't find anything. I see the size limit of 16 TB, but no sizes vmdk documented data store.

  VMDK size is limited to 2 TB less where it is.

  Check @ http://www.vmware.com/pdf/vi3_35/esx_3/r35/vi3_35_25_config_max.pdf

  -Surya

• Size limiting the front of a nearby cache?

  For some reason, I got it in my mind that ahead of a near cache used SoftReference or WeakReference to hold local objects so that they could be trimmed by the virtual machine during garbage collection if the pile has been requested by memory. I don't know where I got this idea, but certainly, it doesn't seem to be the case.
  
  Just so I'm clear, is - a size must explicitly limit the front of a nearby cache?

  That's right - the front cache near holds real references to keys and values so they won't be garbage collected. Size must be limited as described in the documentation here http://download.oracle.com/docs/cd/E15357_01/coh.360/e15723/appendix_cacheconfig.htm#BABDHGHJ LocalCache caches

  JK

• Indipendent SGA size "spfile error."

  Nice day
  
  I changed the size of the SGA Maximum via the EM console. system shows me to restart the database. When I restart data base 'Out of memory' error occurred. Then I start the database using this command "Startup pfile='/oracle/app/oracle/.../init.ora.205484214. The spfile database damaged or changed. Please suggest me how to restore this spfile.
  
  Thank you and best regards.

  start with pfile as database
  Startup pfile ='-';
  Create spfile from pfile ='-';

  "Not enough memory" because impose BONES limit SGA, see trace files and reduce SGA_TARGET and sga_max_size
  and commissioning

  Published by: dba84 on April 26, 2010 02:45

• Resize the primary DB SGA size

  Hello
  
  If the size of the SGA in primary DB to resize, and then need to change standby also?
  
  
  How to change the SGA reduce the size with them related to current transactions?
  
  
  How to estimate the best size for LMS?
  
  How estimnate the optimal size for the PGA?
  
  Can I resize the size of the PGA online without affecting ongoing transactions?
  
  
  Appreciate your help...
  
  Kind regards

  If you change the configuration of the LMS only on the primary database must not affect the database pending.

  You can also dynamically change settings PGA_AGGREGATE_TARGET: there is no constraint as SGA_TARGET and there should be no impact on the database pending.