Shared folder Windows with El Capitan

Similar Questions

• Shared folder, Windows 7 does not automatically update the files as they are deleted or modified.

  original title: data network of Windows 7 problem

  My problem is with all the means to modify data on my network with windows 7.

  The problem is the following:

  * 4 xp pc

  * 2 win7 (1 pro x 32 & 1 x 64 pro)

  * 1 pc xp with my files in a shared folder.

  all on the same network.

  all PCs can access the folder of sparkle. I have traced the folder on the xp pc 4 and 2 win7 pro pc without problems.

  Now, if I delete one of the files on the xp pc, or with one of the other networked xp pc, I can see the file disappeared on all xp pc and or if I make changes on my file as an excel file, I can see the changes on all xp pc.

  Now if I delete or make changes on my files with my pc xp, my pc win 7 does not show that I deleted files or changed anything.

  still, it shows the deleted files and can even open with all the deleted data still intact.

  I deleted the drive on the pc win 7 and consulted mapping data by accessing the location on the network and still have the same problem.

  It's like winning 7 pads files or something.

  Offline files is not enabled, or synchronized.

  I hope someone can help me.

  This problem has occurred to some of my PC too, after trying all the solutions non-utile so-called, ms professional here is how I solved it, click on the menu of the sar, right-click on Documents, remove all library locations, tried and it has not always worked, restored the locations by DEFAULT, it still didn't WORK , has ADDED ONE MORE, now, everything worked well, after this step i took just the location I had added (not by default) and it still works very well.

  This error has nothing to do with third-party software, but it has everything to do with the "libraries" functionality", the reason for this statement is because if I go to computer\c\users\myuser\my documents\
  everything works fine, but if I go to the start menu--> documents (which uses the library feature), then it has failed.
  Just so removing and adding a few ocntent library solved the problem.

• I want to prevent the use of the login and password of CentOS 6.5 to the shared folder Windows 7

  Recently, I lost my hard drive Windows 7 Pro to crash and had to rebuild the laptop from scratch. I have set up the laptop to share files on the local network with XP, Vista, and CentOS 6.5 PC. The file sharing (without need of login/password) with all PC work with one exception.

  When you use the 'of' the CentOS PC file manager to access the shared folder on Windows 7, I am invited with login/domain/password popup box. I enter the credentials and everything works well. And I have to do it once. The same user name exists on all PCs. But I think the connections via file sharing simply under "guest" or "annonimus. The race of Samba (SMB) of the computer of CentOS version is version 3.6.9. I have tried so many combinations of solutions and none seem to work. See the list below:

  Windows:
  Edit local security policies
  Remove the TransportBindName (then add back)
  Set UseNewSmb = 0, then returns to 1

  Samba:
  security = share and then I tried security = user
  client NTLMv2 auth = Yes and return to no.
  NTLM auth = none and return to Yes

  I am hoping there is a configuration that will prvent the annoying popup login/password.

  It seems that my problem has been solved (for me at least). Discovered by searching for another detachment of TechNet
  Listed below are the changes. I doubt that all were required, but there still Big Bang solutions seem to always work when dealing with Microsoft operating systems, Yes?

  The registry

  1 KEY: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa
  DATA: everyoneincludesanonymous = 1

  2 KEY: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa
  DATA: NoLmHash = 0

  3 KEY: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa
  DATA: LmCompatibilityLevel = 1

  4. KEY: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters
  DATA: restrictnullsessaccess = 0

  In the policy editor of local security under the Security Options folder

  1. Microsoft network client: password is sent unencrypted SMB third party = active servers

  In the network sharing Center

  1. go to the advance sharing settings page

  2. Select: Activate sharing files for devices that use encryption 40 or 56-bit

  Test:

  1. reboot Windows 7

  2 reboot the Linux server

  3. open Linux Network Browser (Thunar) application

  4 navigate in the actions of Windows 7 without having to enter the login/password: success!

• We can export runing DB oracle on linux backup file to the shared folder windows directly?

  
  Hi friends;

  We can export runing oracle DB on linux backup to windows shared folder file directly using exp utility (using the user exp = aaaa file=\\10.10.10.xx\backupfolder...)

  concerning

  If you use "exp", you could use an installation of the Oracle Client (which has included in it exp) on Windows and connect to the network (using an LMO connection string) to the database on the Linux server.  This way, the dump file is created by Windows exp.

  Otherwise, if you don't know how to mount your Windows file system to Linux (I have not), you can run Linux exp.

  Hemant K Collette

• Start Windows with El Capitan upgrade and now OS advantage!

  Hello:

  I had Windows 7 installed on bootcamp and run without a hitch.  With the upgrade to El Capitan, the entire partition and Windows startup option disappeared.

  I tried to correct it and could see the Windows partition with option for (by pressing Option at startup to the top), but the error I get is now that the operating system is missing.

  Here are the steps that I followed to solve the initial problem:

  1. This is the result of the following commands:

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  --------------------------------------------------------------------------------

  Cs diskutil list

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F7087A6A-CC59-4D01-8236-EEE7F2CD70BE

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 430789959680 B (430.8 GB)

  Free space: 18948096 B (18.9 MB)

  |

  +-Physical volume EE4F25E0-6F1A-4579-BFAE-43B1E8F150A1

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 430789959680 B (430.8 GB)

  |

  +--> Logical volume family 7BC7C103-E99B-4258-B349-16A6F81853C0

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume DB39C2E3-FD65-40AF-AECD-C5426AFE2F73

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 430418690048 B (430.4 GB)

  Reversible: Yes (no required decryption)

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  --------------------------------------------------------------------------------

  sudo TPG - vv - r see the/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 977105059

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 841386640 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  841796280 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  843065816 16852520

  859918336 117186560 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  977104896 131

  977105027 32 table dry GPT

  977105059 1 dry GPT header

  --------------------------------------------------------------------------------

  sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 60821/255/63 [977105060 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AC 1023 254 63 - 1023 254 63 [409640-841386640] < unknown ID >

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [841796280-1269536]

  * 04:07 1023 254 63-1023 254 63 [859918336-117186560] HPFS/QNX / TO THE

  --------------------------------------------------------------------------------

  2 installed gdisk

  --------------------------------------------------------------------------------

  sudo gdisk/dev/rdisk0

  GPT fdisk (gdisk) version 1.0.1

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Scanning partition table:

  MBR: hybrid

  BSD: absent

  APM: absent

  TPG: present

  Found a valid GPT with hybrid MBR; using GPT.

  Command (? for help): P

  Disk/dev/rdisk0: 977105060 sectors, GiB 465.9

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: 7F7B7C2C-D4E1-463A-A358-C48DC4D06309

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 977105026

  The partitions will be aligned with the boundaries of sector 8

  Space free total is 16852657 sectors (8.0 GiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 of MiB EF00 EFI system partition

  2 409640 841796279 401.2 giB AF05 Macintosh HD

  3 841796280 843065815 619.9 MiB AB00 Recovery HD

  4 859918336 977104895 55.9 giB 0700 BOOTCAMP

  Command (? for help):

  --------------------------------------------------------------------------------

  3 installed TestDisk

  --------------------------------------------------------------------------------

  TestDisk 7.1 - WIP, utility data recovery, February 2016

  Christophe GRENIER <[email protected]>

  http://www.CGSecurity.org

  / Dev/rdisk0 - 500 GB of disk / 465 GiB - 977105060 sectors (RO)

  The hard drive (500 GB / 465 GiB) looks too small! (< 560 GB / GiB 521)

  Check the size of the hard drive: HD jumpers, BIOS detection...

  The following partitions cannot be recovered:

  Start end partition size in sectors

  > Data 977104895 1094291454 117186560 MS

  Mac HFS 977105020 978374555 1269536

  [Continue]

  NTFS, blocksize = 4096, 59 GB / 55 GiB

  --------------------------------------------------------------------------------

  2 screen after [continue]

  --------------------------------------------------------------------------------

  TestDisk 7.1 - WIP, utility data recovery, February 2016

  Christophe GRENIER <[email protected]>

  http://www.CGSecurity.org

  / Dev/rdisk0 - 500 GB of disk / 465 GiB - 977105060 sectors (RO)

  Start end partition size in sectors

  > system EFI P 40 409639 409600 [EFI System Partition]

  D Mac HFS 409640 841071143 840661504

  Data SM 709029896 843067392 134037497 D

  D Mac HFS 841796280 843065815 1269536

  Data SM 843067392 977104888 134037497 D

  Data SM 859918336 977104895 117186560 D

  D Mac HFS 975835488 977105023 1269536

  Structure: Ok.  Use up/down arrows to select the partition.

  Use the arrow keys left/right to CHANGE the characteristics of partition:

  P = primary D = deleted

  A: keys Add partition, L: load backup, t: change the p-type: list of files.

  Enter: continue

  FAT32, blocksize = 512, 209 MB / 200 MiB

  --------------------------------------------------------------------------------

  P (list of files on the MS Data 843067392 977104888 134037497)

  --------------------------------------------------------------------------------

  TestDisk 7.1 - WIP, utility data recovery, February 2016

  Christophe GRENIER <[email protected]>

  http://www.CGSecurity.org

  Data 843067392 977104888 134037497 MS

  Directory /.

  > dr-xr-xr-x 0 0 0 14 - Sep - 2015 14:23.

  Dr-xr-xr-x 0 0 0 14 - Sep - 2015 14:23...

  Dr-xr-xr-x 0 0 0 15 June 2015 07:02 $Recycle.Bin

  Dr-xr-xr-x 0 0 0 9 August 2015 17:49 WINDOWS $. ~ BT

  Dr-xr-xr-x 0 0 0 9 August 2015 17:49 $Windows. ~ WS

  Dr-xr-xr-x 0 0 0 9 August 2015 start 19:33

  Dr-xr-xr-x 0 0 0 15 June 2015 07:10 Intel

  Dr-xr-xr-x 0 0 0 16 June 2015 01:44 MSOCache

  Dr-xr-xr-x 0 0 0 14 July 2009 12:20 PerfLogs

  Dr-xr-xr-x 0 0 0 20 July 2015 16:50 Program Files

  Dr-xr-xr-x 0 0 0 9 August 2015 16:23 Program Files (x 86)

  Dr-xr-xr-x 0 0 0 16 June 2015 01:45 ProgramData

  Dr-xr-xr-x 0 0 0 15 June 2015 07:02 recovery

  Dr-xr-xr-x 0 0 0 1 - Sep - 2015 22:29 System Volume Information

  Dr-xr-xr-x 0 0 0 15 June 2015 07:08 users

  Dr-xr-xr-x 0 0 0 12 August 2015 15:02 Windows

  -r - r - r - 0 0 8192 15 June 2015 14:50 BOOTSECT. BAK

  -r - r - r - 0 0 2056 15 June 2015 07:10 RHDSetup.log

  -r - r - r - 0 0 383786 November 20, 2010 21:40 bootmgr

  -r - r - r - 0 0 12812939264 14-Sep-2015 21:20 hiberfil.sys

  -r - r - r - 0 0 17083920384 14-Sep-2015 21:20 pagefile.sys

  Next

  Use the change directory, h to hide the Alternate Data Stream

  q to quit,: to select the course file, a to select all files

  C to copy the selected files, c to copy the current file

  --------------------------------------------------------------------------------

  What are the measures taken subsequently.

  A NEW TERMINAL WINDOW.

  --------------------------------------------------------------------------------

  sudo gdisk/dev/rdisk0

  Password:

  GPT fdisk (gdisk) version 1.0.1

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Scanning partition table:

  MBR: hybrid

  BSD: absent

  APM: absent

  TPG: present

  Found a valid GPT with hybrid MBR; using GPT.

  Command (? for help): P

  Disk/dev/rdisk0: 977105060 sectors, GiB 465.9

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: 7F7B7C2C-D4E1-463A-A358-C48DC4D06309

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 977105026

  The partitions will be aligned with the boundaries of sector 8

  Space free total is 16852657 sectors (8.0 GiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 of MiB EF00 EFI system partition

  2 409640 841796279 401.2 giB AF05 Macintosh HD

  3 841796280 843065815 619.9 MiB AB00 Recovery HD

  4 859918336 977104895 55.9 giB 0700 BOOTCAMP

  Command (? for help): D

  Partition number (1-4): 4

  Command (? for help): N

  Partition number (default 128-4, 4): 4

  Everything first in the sector (34-977105026, default = 843065816) or {+ -} {KMGTP} size: 843067392

  Last sector (843067392-977105026, default = 977105026) or {+ -} {KMGTP} size: + 134037497

  The current type is ' Apple HFS / HFS +'

  HEX code or GUID (L to view codes, entry = AF00): 0700

  Changed type of partition to "Microsoft Basic data."

  Command (? for help): q

  sudo gdisk/dev/rdisk0

  Password:

  GPT fdisk (gdisk) version 1.0.1

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Scanning partition table:

  MBR: hybrid

  BSD: absent

  APM: absent

  TPG: present

  Found a valid GPT with hybrid MBR; using GPT.

  Command (? for help): R

  Recovery/processing command (? for help): O

  Size of the disk is 977105060 sectors (465.9 GiB)

  MBR disk identifier: 0x3F3EA8FD

  MBR partitions:

  Code of State sector Boot start end sector number

  1 1 409639 primary 0xEE

  2 409640 841796279 primary 0xAC

  3 841796280 843065815 primary 0xAB

  4 * 859918336 977104895 0 x 07 elementary school

  Recovery/processing command (? for help): H

  CAVEAT! Hybrid MBRs are flaky and dangerous! If you decide to not use one,

  Simply press enter at the prompt below and your partition table MBR will be

  be intact.

  Type one to three GPT partition numbers, separated by spaces, to be

  added to the hybrid MBR, in order: 2 3 4

  Partition of EFI GPT (0xEE) place first in the MBR (good for GRUB)? (Y/N): Y

  Create entry for the #2 GPT partition (partition MBR #2)

  Enter a hex code MBR (default AF):

  Set the bootable flag? (Y/N): N

  Create entry for the #3 GPT partition (partition MBR #3)

  Enter a hex code MBR (default AB):

  Set the bootable flag? (Y/N): N

  Create entry for the #4 GPT partition (partition MBR #4)

  Enter a hex code MBR (default 07):

  Set the bootable flag? (Y/N): Y

  After that, I had the option of Windows start show on the charger of bootcamp, but no operating system (Windows) is available.  Any help with this would be welcome.  Thanks in advance.

  O.T.

• How to stop sharing folder Windows Media Player executable because it uses too much CPU?

  How can I disable the network share (wmp.share) because he is constantly using too much CPU? Any help will be greatly appreciated!

  Hello
  • This happens while Windows running media player?
  • What were the changes made before the problem occurred?
  You can view these methods:
  Method 1:
  I recommend you perform the clean boot.

  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:
  I suggest that you try to reset the media library. Note firstly reset the library will make you lose all play counts and ratings too. Then, follow these steps:

  -Restart the PC.
  -Click Start, type services.msc in the search field and press ENTER. In Services, locate the Windows Media Player Network Sharing Service . If its status is started , double-click the service, and then click stop .
  -Click Start, type %LOCALAPPDATA%\Microsoft in the search field and press ENTER. This folder opens in Windows Explorer.
  -In this folder, rename the folder Media Player as Old Media Player . If you do not see the folder, then it is probably hidden. Set Explorer to view the hidden files and folders and show protected system files.
  -Launch WMP, your library will have been reset and will be rebuilt. Check if the problem persists.

   
  Method 3:
   
  Ways to improve your computer's performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

• Windows XP can't see the shared folder windows 7

  I'm on a domain active directory and copied the files on a windows 7 and it distributes and everyone has access. All my window 7 can see n work fine with it. None of my XP units can access. I can ping to the IP address and I even use the IP address when no part mapping. Nothing seems to work I try.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

  Hope this information helps.

• How many connections to a shared folder is allowed in the different versions of Windows?

  I have Windows 2000 with a shared folder to which only up to 10 computers can connect. Is there a way to increase this limit, and if not, is this upper limit in later versions of Windows? Thank you.

  This is the limit on all but the server versions.

• CANNOT write to files in the shared folder of XP on a PC running windows 7 - but good vice versa

  I have a laptop under Windows 7 (SP1) and a desktop running XP (SP3).  I have connected both via a wireless network. While I can see and access shared files/folders from one computer to the other computer, I can only read/write files in the shared folder on the portable computer that is running Windows 7.

  If I try and change a file in the shared folder from the PC under XP on my laptop, I get the message "this file is set to read-only. Try again with a different name "."  I know that the file is NOT checked for read-only. When I change the name of the file I get the error message "\\Desktop\SharedDocs\filename.doc you are not allowed to save in this location. Contact the administrator for approval.  You want to save in the folder my documents instead? "If I save the file to another location on the laptop under Win7 it save then OK.  I can not just save a modified version of the file in the same shared folder from desktop running XP.
  It seems that it must be something to do with permissions and access to the parameters of the desktop running XP but I can not find these. Fairly easy to find in Windows 7.
  Finally, I don't have a login/password set for the connection to the computer to Office XP.  I don't have a user name and password for the laptop Win7 but you have turned off password protected sharing.
  Anyone have a solution to this?
  Thank you

  OK - the problem is now resolved.

  I noticed that the read-only for the shared folder has been checked. When I unchecked it and also checked the box "allow network users to change my files" in the shared folder properties/sharing, I was able to modify and save files in the shared folder on my laptop.
  It's a little weird because I thought I had done this the other day where the results have been less successful.  Strange.
  Thanks for your help.

• Connecting to a shared folder, select 'Remember my password', but Windows doesn't remember my password

  When I connect to the shared folder and click on "remember my password", after a reboot, it calls for new username and password and it does not save permenantely, please help "

  You have XP Home or XP Pro?
  In accordance with the following article:

  "Behavior of stored user names and passwords"
    <>http://support.Microsoft.com/kb/281660/en-us >

  "Windows XP Home Edition stores only the credentials of Remote Access Services/Virtual Private Networking and passport."

  You can go to the area to "Manage passwords" as described in the box above and see if your passwords are there or if you can add passwords.

  Another article:

  "Stored user names and passwords credentials are stored for the lifetime of the Logon Session.
    <>http://support.Microsoft.com/kb/281249 >

  HTH,
  JW

• Shared folder of Windows XP Media Center number...

  I recently installed a new router on my small network.  I have a main desktop pc that I use as a 'server '.  But just by regard saving the files shared on this topic.  The PC is running XP Media Center.  Well since I installed the new modem/router I can not access the actions of another pc on the network.

  When I installed the new router I have not any changes on the pc.  I rechecked the records to make sure they were always shared and they were.

  I also checked to make sure they were on the same workgroup.  I can ping each computer on the other, so I know that they can communicate over the network.  Don't know what to do next.  IM at a loss.  Any help would be appreciated.

  DS

  It has all the symptoms of a problem of firewall on the server computer.  If you only use Windows Firewall, make sure you that there is an exception "file sharing and printer". Instead of the ping command, try the following command from a window (start-> Run-> "cmd") of each machine control to another:

  nbtstat-a 192.168.1.5

  Where '192.168.1.5' is replaced with the IP address of another machine.

  From the same command prompt window, try to connect manually using the command:

  NET use * \\computer\share

  Where 'computer' is replaced by a computer name or IP address, and "Share" is a shared folder on this computer. Error messages from the command prompt are sometimes more revealing.

  HTH,
  JW

• Cannot access any shared folder on the network of windows 7 Professional

  Hello

  I have a very strange problem.

  I have a home network with 4 computers.
  I can share files from any computer to the other.

  Recently, I bought a new laptop Lenovo E530 in with Windows 7 Professional installed on it.

  The problem is that I can't access any shared folder on my home network by '\\com-name '.

  I cannot yet access the folders on the computer that is shared from the inside, by specifying there name with the prefix "\".

  However, I can ping or even make remote desktop on other computers on my network.

  I can also access shared folders on my Windows 7 Professional from other computers.

  Looks like there is something wrong with the configuration of my OS from Windows 7 Professional blocking access to any shared folder on my network.

  I get the following error message:

  Windows cannot access \\comp-name

  Check the spelling of the name. Otherwise, it could...

  Error code: 0 x 80070035

  The network path was not found.

  I tried to use the button to diagnose, but without success.

  Help, please

  Dudi.

  Hello

  I suggest you try all the steps from the following link:

  Sharing of files and printers
  http://Windows.Microsoft.com/en-in/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See also: File and printer sharing: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows7/file-and-printer-sharing-frequently-asked-questions

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Access denied error when the output directly in a shared folder in Windows 7

  I have two workstations, the first working (PC1) of Windows Server 2008 R2 and the other work (PC2) of Windows 7 Professional.

  I work on PC1 using the app called "MetaDimention" dealing with PDF files and generates output files as a separation of colors (CMYK color separation) TIFF files. The problem arises when I intend to exit that TIFF files generated by "MetaDimention" directly in the shared folder on the PC2 via the network "workgroup."

  The 'MetaDimention' gives me the error message: JobTicketMerger: the data output destination '\\EQCENTER1\TiffOut' is not valid (ERROR_ACCESS_DENIED).

  where "\\EQCENTER1\TiffOut" is the path to the folder shared network on PC2.

  I noticed this problem when I using Windows 7 and Windows Server 2008, 2012 as an output destination, but there is no problem when the destination using windows server 2003 path.

  I tried to Google the error message generated by the Application of MetaDimention and I found this thread on the other forum:

  MetaDimension output error - problem

  I have the same problem exactly as mentioned, it has, after several positions the person who asked about the problem, he said that he had found the solution by changing some services started as LocalAccount user! but I do not understand what it does exactly. and here's the quote from his original message: "solved!" some services started as LocalAccount, replaced by the user and all ok.

  Please tell me what can I do to solve this problem in some detail.

  Thank you

  Hi Dia,.

  Thanks for posting your query in Microsoft Community.

  Your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forums.

• Number of simultaneous connections that I have in a shared folder on Windows 7 Professional?

  I just need to confirm something.

  Is there a limit the number of users who can access a shared folder on a Windows 7-based computer at the same time?

  As far as I can see the limit seems to be 20 users... the reason why I say that it is when you share a folder, you cannot increase the limit to users who access the folder above 20?

  The solution would be to install the server operating system instead of a workstation OS.

  Any thoughts would be appreciated.

  The limit is 20 concurrent connections. Remember, however, that one device can do multiple connections.

  In any case you would be much better at this sort of level with an operating system server in any case. Office of the OS are not intended to be used for sharing files on this scale.

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• A shared folder on windows 2008 r2 is very slow

  Hi all

  The scenario is as below.

  1 Server - Windows 2008 r2 with all updates

  2. customers - both Windows 7 and Windows XP

  3. created a domain and all clients are part of the domain.

  4. we shared a number of folders on the server for clients to use.

  The problem is

  1. very slow access to the shared folder in client systems.

  2. sometimes all shared folders showes upward and sometimes not.

  3. sometimes very little, I mean 1 or 2 folder appear, despite 10 or more is shared.

  4. access is extremely slow.

  5. several once be the Member of the domain while accessing the share he asks credentials, even if the user connects using the domain credentials.

  Troubleshooting of the measures taken:

  1. update the server with all updates.

  2. check the network cables and switch.

  Now, we have recently reinstalled the server, which worked very well, because of some hardware of gradations.

  Please help, very urgent and necessary evil.

  Thanks in advance.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home