sharing network? you have to share a network?

Similar Questions

• shared folder t could not access gives error that you have not permission to use network resources

  folder t couldn't access gives error that you have not permission to use network resources while I connect with administrator

  Hello

  1. were you able to access the folder shared earlier?
  2. don't you make changes on the computer before this problem?
  3. What is the full and exact error message?
  4. how the computers are connected?

  Please answer these questions and provide us with more information. This could help us help you better. However, you can view the Sub articles that may be useful.

  Error message when you try to access a network Windows XP computer: "you might not have permission to use this network resource".
  http://support.Microsoft.com/kb/913628

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP
  http://support.Microsoft.com/kb/318030

• Three computers networked fine then suddenly the error message «...» Contact the administrator of this server to find out if you have access permissions. Not enough server storage is available to process this command. "

  I had a network that worked very well with three 2 computers running Windows XP Professional and Windows XP Home Edition 1. Suddenly, the network has just stopped allowing certain communications giving the above error message (I have another thread address with XP to Vista computers). The main computer with XP Pro, I'll call A, the second computer with XP Pro, I'll call B and third with XP Home will be C. All computers can share files and printers then without any changes to the system that occurred the following:

  A can access the documents and printers on B and C

  B may NOT have access to documents or printers on one, but access to documents and printers on C

  C cannot have access to the documents on one, but CAN access A printer and CAN access the documents and printers on B

  When access is denied error message is displayed:
  "\\A\My documents is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Not enough server storage is available to process this command. "(\\A\ being the computer that I am trying to access)

  As I said access from all computers on this network was working fine a week ago and there has been absolutely no changes made to the network. I checked the following

  1. workgroup name on all computers are the same
  2. file and printer sharing are enabled for all computers.
  3. all computers may been from each computers just denied in some cases.

  The firewall that runs on all three machines is AVG and there were no changes to the one last week, but I checked that sharing is allowed.

  I even tried to run the Configuration Wizard from the network on all computers to see if it works, but the same exact problems occur after doing this.

  I met this problem now THREE times. I can't believe that I'm the only one who has this problem and I can't believe that there isn't a solution for it. None of the Microsoft documentation has even a hint of a solution for this specific problem.

  I need a solution that closes completely the network at my church, and they cannot afford to buy printers and others for each of their computers.

  This error message is misleading. See article Knowledge Base Microsoft Antivirus software may Cause Event ID 2011 for a likely solution, specifying a value of IRPStackSize 15 on A computer.
  Boulder computer Maven
  Most Microsoft Valuable Professional

• You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  What does this message mean? I get when I click on the icon to evaluate files on another of our computers. "You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  The other computer has not been configured to allow remote access to this folder from your account.  You'll want to go to this other computer, right click on the folder that is shared and go to properties, then set the appropriate security settings to allow access.

• Error when you try to connect to a shared network drive by car on the portable XP from VISTA desktop: "not enough server storage is available to process this command."

  Hello
  I was able to connect ok in a shared folder on my laptop VISTA from my XP desktop computer.
  but when I try the other way around (to connect to a shared drive on my desktop XP FROM my VISTA laptop), I get the following error message:

  "The mapped network drive could not be created because the following error occurred: not enough server storage is available to process this command."

  Desktop is HP Pavilion a1410n
  Windows XP SP3 Home Professional 3 GB RAM
  Laptop is HP dv5z
  Windows Vista Edition Home Premium SP2 4 GB RAM

  I would like suggestions.
  Thank you very much.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Steve,

  Thanks a lot for the link to this article.
  It was most helpful.

  I also found this forum useful post:
  http://www.techsupportforum.com/Networking-Forum/networking-support/114373-cant-map-new-network-drive.html

  In particular, he said to check the event log of the computer that you are trying to connect to (the remote computer) to search for an event ID 2011, which would be entered in the time you finally tried to connect and does not.
  I did alt-click on the icon MY COMPUTER (from the remote computer) and the menu HANDLE, click the EVENT VIEWER folder (in the left pane), and then the SYSTEM folder under that.
  On the right pane, I found an ad for the event ID 2011 at the time wherever I finally tried to connect.

  To test this, I went to the VISTA laptop and tried to connect the computer to Office XP again, which gives a different error message on the VISTA laptop.
  When I went back on the XP desktop I tried to connect to and looked again to the event log, of course ANOTHER event ID 2011 has been registered with the new time of my additional attempt to connect.

  He confirmed that it was likely that the IRPStackSize was the problem, as your proposed article.

  Then I printed article how DO TO SAVE AND RESTORE the REGISTER to: http://support.microsoft.com/kb/322756/
  then backed up the registry (both by running a restore system to register and by exporting from the top level of the regedit).

  I then went in regedit on the desktop in XP for the
  HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\LANMANSERVER\Parameters file described in your article.
  There was NOT an entry for IRPStackSize in the right pane, so I followed the instructions in the add - it and change it to decimal 15.
  I rebooted and tried to connect but still got the same error.
  The article said that the default value is 15, so I assumed that adding input IRPStackSize to 15 has not changed anything.

  So I went into regedit and changed the value of IRPStackSize of 15 to 18, restarted and it solved the problem.

  I found that the following articles is also useful in the resolution of this problem (aside from the one you gave):

  http://support.Microsoft.com/kb/285089

  http://www.smartcomputing.com/editorial/article.asp?article=articles/archive/r0803/10r03/10r03.asp

  I typed this all this while this might help others who may encounter this same
  Error "not enough server storage is available to process this command" when you try to
  Map a network drive (or just try to connect) to a XP computer from another computer.

  Thanks much for the lead.

• Portege Z30 - do you have a network icon in the taskbar?

  Hi all

  This issue is specifically for users of Toshiba Portege Z30s. Mine does not have a network icon in the task bar, so I was wondering if another application from Toshiba is supposed to manage the network. In addition, it nothing happens when I go to control panel - network and Internet - connection to a network.
  I was wondering if other Z30 users are facing the same question.

  Thank you.

  It seems that you have already started a same discussion on this theme in another thread here in the forum:
  https://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=81599

  According to the rules of the forum, its recommended to follow the discussion on thread to avoid misunderstandings.

  By the way: I guess it's a software problem and especially recovery system solves these problems in software.

• No devices (audio, network...), after you have reinstalled windows xp

  I have a DELL Inspiron 6400. I reinstalled Windows XP, I had some problems, but now there is no device (audio, network...) it says that I should install its drivers.

  When I open the Device Manager, in the section other devices, it shows the devices (audio, network...) next to a yellow question mark.
  could someone help me please.

  The Dell Web site has all the drivers for your PC. You should also have received a CD of drivers with the PC.

  http://www.Dell.com/support/troubleshooting/UK/en/ukdhs1/product/Inspiron-6400x

  There is also a "Scan for system updates" button, but you have to break the situation / the egg of the chicken do not have network drivers to use (download drivers Ethernet to another PC?)

  Driver help is here...

  http://www.Dell.com/support/drivers/UK/en/ukdhs1/help

  .. recommendations of .note Dell about the order of installation of the drivers.

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_1A0C0937D62A8739E0401E0A55174744

  Tricky

• My Norton 360 Security Center management difficulty, cannot depend on the anti-virus monitor. After you have reinstalled the drivers of network accidentally deleted__, eternet connection

  body in title...

  Hi gettaclue2002,

  · What is the service pack installed on your computer?

  · You have another outside Norton Security software?

  Try the methods below:

  1. I would say that you stop and start the service on the computer Security Center.

  a. Click Start, click Run, type services.msc in the Open box and then click OK.

  b. in the list of Services (Local), click on Security Center and then click Properties.

  Make sure that you stop and start the service, then check if the problem persists.

  2. you can also uninstall and reinstall Norton Security software, and check the results.

  Link, please refer to: download and run the Norton removal tool to uninstall your Norton product:http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN&ln=en_US

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• \\mycomputername is not accessible. you might not have permission to use this network resource. comtact the administrator of this server to find out if you have access permissions.

  \\mycomputername is not accessible. you might not have permission to use this network resource. comtact the administrator of this server to find out if you have access permissions.

  Hello

  Thank you for giving us the opportunity to help you with the query.

  I understand the inconvenience caused, now that you have me with you I would take care of that.

  I suggest you refer to the steps suggested byJack MVP (replied on August 29, 2010)

  In the next thread that speaks of a possible solution to the related question.

  PC is not accessible. You might not have permission to use this network resource. Contact the editable from this server to find out if you have access permissions.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/PC-is-not-accessible-you-might-not-have-permission/26a1a479-8BA5-4213-9181-02364c884937

  It will be useful.

  Let us know the status, we are happy to help you further.

• "You have no preferred wireless networks.

  Hello

  I installed Build 7100 and have been finding problems in all directions. Is it the right place to report issues? The dev team will never receive any comments posted here?

  I have a specific problem that is driving me crazy and if it is not sorted there is no way I will buy Windows 7 when it is released. Whenever I reboot or exit the mode 'sleep' my wireless network was disconnected. The problem is that it automatically reconnect. In fact when I try a reconnection he asks me the password all over again as if she had never met before network. In addition, I have try three or four times before it connects without error. The network is also extremely stable and was under XP.

  The Troubleshoot utility of reports "You have no preferred wireless networks", which is false, because I connect automatically is always checked for this SSID. I tried which allows to 'Connect even if the network is not broadcasting its name (SSID)', but this option is reset after reboot / sleep. "Connect automatically" is still however verified. Installed with the driver is REALTEK USB Wireless LAN Utility Version 402.1470.518.2007.

  I fear that such problems will not get noticed at Microsoft because they are now focusing only on telemetry. I want to buy Windows this time, I don't really, but I won't buy a defective product.

  I connect to the Router 1 billion (BiPAC 7401VGP R3) with a USB (BiPAC 3012 G) wireless network adapter.

  Hi Vargorlopano,

  Thanks for posting on the Forum of answers.

  Some network cards have to be able to save the settings that will put your NIC sleep when Windows goes to sleep.

  You can click Start, type "power options" then right click on the entry that is displayed at the top of the menu and click on "Run as Administrator".
  Your password can be asked to you.
  On the right side of the window, click on "Change plan settings", then click on "change power avancΘs."
  You should see an entry in the list that says 'wireless adapter settings', change it to 'Performance', and click OK.
  Click on save changes.

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Message blackBerry Passport "Make sure you have sufficient network coverage" displayed even after deletion of security

  Hello

  Hope this message finds you well. I tried to download Skype from BBWorld, but after selecting the download option, the process was quickly interrupted by the following message is displayed: a network error has occurred during the processing of your request. Please verify that you have sufficient network coverage and try again."

  According to the workaround solution provided by KB33818, I conducted a security wipe. Unfortunately, even if Skype was the first application, I chose to download, the error message was re-elected.

  Can you please provide clear instructions on how to manually clear the cache of newspapers?

  Thank you so much for your help!

  Cezara

  Additional note: after this failure of Skype download, I managed to download, install and use WhatsApp successfully.

  Hello cezara888

  Do you mean how to clear the cache in the world of BB? If so, it is the workaround, How to clear the cache in the BB world.

  I'm curious for the Ko, you posted, because there is nothing of BB world. Can you please post the right pair?

  I can't find Skype in the world of BB, Amazon Appstore. I downloaded Skype using Snap, credit to the John_Clark.

  rudosx, I hope you don't mind, I joined this thread.

• network card and other missing drivers after you have installed windows 7 ultimate on my elitebook 8540w

  HP Elitebook 8540w, model WH137AW #ABA - this laptop and was previously running a trial version of windows 7 Professional 64-bit. I wanted to install windows 7 ultimate 64-bit. I chose to install instead of upgrade that I assumed that the demo version was not expandable. Before the installation, I was able to connect to a wireless network with success. After you have installed windows 7 ultimate successfully, I was more able to connect or see all the networks. The diagnosis error indicates that I can miss a network card, or if I don't have one, the driver may need to be reinstalled. I saw a previous post and answer that looked very similar, but the difference is that I am out of my network card driver, so I'm not able to download any other drivers. -help me please!

  Yes... you can do. If you get confused on what to install, please provide the hardware ID.

  HardwareID: (open start, type devmgmt.msc and press on enter.) Double-click on a device. Choose the Details tab, then the hardware in the menu ID drop-down).

• BlackBerry Z10 "Make sure you have sufficient network coverage" when you run android app download.

  Hello

  I want to remove and reinstall some out of my android apps.

  After that deletion of apps, Apps icon was disappear, but I can not reinstall it because is is still in the system.

  At resolutions that download 'android activity '.

  But now all trying to download this application. I'm getting "Make sure you have sufficient network coverage" this error msg.

  I tried

  -Clear cache

  -Sufficient coverage

  -Plan data does not work as well.

  I need to go back a few apps very badly

  Help, please

  The issue of "network error" has been resolved, so please let me know if you are still having this error when you try to download or update applications using BlackBerry World. Thanks for your patience so that this issue has been studied.

• HP 8600 printer range is found on the network after you have installed the Dymo printer for processing of credit cards

  HP 8600 printer range is found on the network after you have installed the Dymo 450 Turbo printer for processing of credit cards

  Hello Christina,

  1. What is the IP (Internet Protocol) address, the subnet and default gateway of the printer?

  2 have you tried to Ping to the IP address of the printer?

  Reset the printer can help get the problem solved.

  Perform the steps mentioned below to get the address of IP(Internet Protocol), subnet address, and default gateway.

  a: Type CMD in the search box start and press ENTER.

  b: now, type Ipconfig/all and press ENTER.

  Proceed as for Ping to the IP address of the printer.

  a: Type CMD in the search box start and press ENTER.

  b: type PING (IP address of the printer) , and then press ENTER.

  Reset the printing system:
  a: Go to System Preferences > Print & Fax
  b: Right (or control), click inside the box that lists your printers and select Reset Printing System.

  WARNING- This will remove ALL your printers!
  c: Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  Click on the link mentioned below as reference.

  http://Windows.Microsoft.com/en-in/Windows7/install-a-printer-on-a-home-network

  Note: "Check the title that reads" set up a network printer "

  Answer please if you have any questions.

• COMPUTER is not available. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  Original title: cannot add homegroup printer

  Cannot add printer homegroup.  I tried everything I can think of without success.  I have laptop which is part of my home group who can't create a link to a printer attached to another computer.  The search for the printer does nothing.  When I try to add manually, when I click on the computer that hosts the printer, I get the following:

  "[Computer SCIENCE] is not available.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.  The specified network provider name is invalid.

  The problem seems to exist in the computer on which I am trying to add the printer, not the host, as I was able to add another computer to the host without problem.

  Help would be appreciated.

  Thank you.

  Hi Ryan,

  Thanks for the quick response.

  I suggest to change firewall security settings, or disable the security software on the system and try to access the location.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  For more information, you can visit the link below where the client came the similar problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/955717b7-9ea3-424C-9b3a-719520f1b043

  Hope this information is useful.