Shortcut to the different catalog?

Similar Questions

• Import management develop presets for the different catalogs

  When I opened the different catalogues, it seems that some import settings are specific to this catalogue and others are applicable on any catalogue. For example, the option copy or simply add an image is specific to the catalog, but preset to develop is always used for the last import, or none if it was the option chosen.

  Is it possible to specify a different import develop preset on a basis by catalog? Also, is it possible to specify one develop different pre-set camera model (or maybe the other image attribute) in a catalog?

  My current version is the last level of update CC.

  Thank you

  Mario

  Many parameters "last use" tend to be one-by-system, not one-by-catalog.

  While I use multiple catalogs, I never count on these parameters are correct. so I always check them on the assumption that they are bad for the current circumstance.

• My Lightroom does not. It is showing the message - failed to open the Lightroom catalog called Catalog Lightroom because it is too new to be used by this version of Lightroom. You want to select a different catalog?

  My Lightroom does not. It is showing the message - failed to open the Lightroom catalog called Catalog Lightroom because it is too new to be used by this version of Lightroom. You want to select a different catalog?

  It is a catalog that you created on your computer, or coming from another computer?

  If it is one that has been created on your computer, you can search your computer to see if you have two different versions of Lightroom installed. If so, then you want to open the new version of Lightroom by double-clicking its icon, and then you should be able to open the catalog.

• How can I manage the same catalog on external hard drive on two different PCs

  Hello to everyone.

  I would lik to see whether there is a possibility to manage the same catalog on two different workstations. For example, I make a few adjustments in the morning on my pc 1 ad, and then later I close the office but I need to continue to work on the same files on pc 2 without starting all over. Then I make other adjustments to other files that I end the next day on 1 pc.

  Anyone please help?

  Thank you!

  Anna

  Hi Anna,.

  You can store the catalog Lightroom and original images on an external hard drive, and connect the player to the computer on which you want to change.

  Refer to this tutorial to find out how to transfer your catalog on disk: Lightroom training: How do I move Photos or a catalogue on an external drive - YouTube

  Kind regards

  Claes

• Cannot open the lightroom catalog called "Lightroom Catalog" because it's too new to be used by this version of Lightroom.  You want to select a different catalog?  This is the message when I first click on LR and I have no idea what do to m

  Cannot open the lightroom catalog called "Lightroom Catalog" because it's too new to be used by this version of Lightroom.  You want to select a different catalog?  This is the message when I first click on LR and I have no idea

  Hi steves

  This means that you try to open a catalog from Lightroom CC/6 in an earlier version of Lightroom

  What version of Lightroom you have installed?

  Concerning

  Assani

• How to copy the Lightroom catalog on different hard drives?

  Can you tell me how to register my catalog of lightroom on 3 different hard drives? I have it only on a single HDD from now.

  Hi danielleg,

  Greetings!

  Connect your drives on the computer on which your catalog is present

  Simply copy the catalog and stick to 3 different disks.

  The location of the Lightroom Catalog is typically C:\Users\UserName\Pictures\Lightroom (Windows) and User\Pictures. Lightroom (MAC)

  Concerning

  Jitendra

• Installed CC 30-day trial.  Getting the error "Lightroom can't create a catalog named"ightroom catalog on volume OC (c) because Lightroom can't save the changes to this place". Tried to "Choose a different catalog" same mistake several times.

  Installed CC 30-day trial.  Getting the error "Lightroom can't create a catalog named"ightroom catalog on volume OC (c) because Lightroom can't save the changes to this place". Tried to "Choose a different catalog" same mistake several times.

  Hello

  Try resetting preferences

  Note:-back up your Lightroom Catalog beforehand and save Photoshop preferences

  * Now reset preferences Hold Down CTRL + ALT + SHIFT (WIN) CMD + OPTION + SHIFT (MAC) while starting Lightroom. A dialog box appears prompting you to restore Preferences (LR)

  Once done open again Lightroom

  Make sure you have a lot of read/write of the location where you save the catalog... To create a folder on your desktop, confirm, then try to create the catalog again it

  I would like to know if there is a question...

  Thank you

  Assani

• How to import photos from a different catalog and keep the setting in this catalogue?

  How can I import photos from a different catalog and keep the setting in this catalogue?

  In a catalog, select the photos you want, then use file-> export as catalog

  In the 2nd catalog, use the file-> import from another catalog

• HP LaserJet P1102w: Windows 8.1 - run two different USB connected P1102w printers with simple shortcut on the desktop?

  I am trying to set up a single laptop Windows 8.1 for someone who uses it according to the seasons in two locations (FL and MY). I installed a HP LaserJet P1102w printer in each location. I wish I had a printer that is connected USB (one at a time will be connected) able to access in an only menu icon Office or file print command.

  When you add the second printer, Windows8.1 recocognized, the driver is already installed, he apparently recognizes the different addresses MAC and/or numbers of series of different printers and present second printer on the page devices and printers in Control Panel or allow a second printer on the desktop icon.  The only way to tell apart printers is that one is listed as a Hewlett-Packard LaserJet P1102w and the other is listed as a HP LaserJet P1102w. It is rather confusing to the elderly person who will be using the laptop.

  Is it possible to have the mobile exploit any printer is connected both by means of a simple print command or icon? Maybe by connecting via a WSD Port Monitor?

  Thanks for any help or advice!

  Dave Waters

  Hey @dmwaters138,

  Welcome to the Forums of HP Support!

  I understand that you do not want to have two HP LaserJet Pro P1102w printer operation via USB Wired on 1 single machine with a single order of printing or the icon. I would like to help you with the configuration of this option today. Because there are two distinct Laserjet on Windows 8.1 computer printers, to do two icons impression for various devices. The best way to tell the difference between the two devices is to rename printers. Thus, when the client goes in file and print in the print dialog window, simply choose the printer name that corresponds with the device they want to print to. You can rename printers all you want. Install printers on the WSD Port wireless network would give the same result of having two copies of the printer is installed on the computer. One thing I see, is that the name of the HP Laserjet Printer is unusual. It seems that your printers may be using the built in Windows drivers, rather than the HP Full Feature driver package for the device. This may cause printing conflicts in the future. Can I please you follow the steps below to set up and install both LaserJet HP correctly.

  Step 1: Remove the drivers:

  It is crucial that your HP LaserJet are using the correct HP driver package. So I'll have you remove two copies of your HP Laserjet of the computer. Please make sure that the USB cables are connected.

  1. Open the screen, Start by selecting the Windows icon at the bottom left of the computer screen or by selecting the Windows key bottom left of the keyboard, to the right of the Ctrl key
  2. In the start screen, type devices and printers. Click on devices and printers
  3. In devices and Printers window please right click on the Hewlett-Packard Laserjet and select delete device or delete. Once this copy is a party, please right click on the HP Laserjet P1102w and select 'remove device' for this one as well. After have removed two copies of the Laserjet please close devices and printers.
  4. Then, on the Start screen type programs and features. Click on programs and features to launch the window
  5. Scroll the list of programs and find the HP Laserjet driver package. If you see the HP Laserjet printers select Uninstall. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, please close programs and features and continue to the next step.

  Step 2: Remove temporary files:

  1. Open the screen, Start by selecting the Windows icon at the bottom left of the computer screen or by selecting the Windows key bottom left of the keyboard, to the right of the Ctrl key
  2. In the start screen, type run. Click on Run to launch the run dialogue box
  3. In the run box, type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 3: Install devices:

  1. Please leave unplugged USB cables

  2. Please click here to download the package full feature software and driver for the HP Laserjet Printer

  3. when the download is complete, please follow the instructions on the screen to install the first Laserjet. Make sure you select the 'install the printer software ' tab connect the USB cable only when the installation window prompts to.

  

  4. Once installation is complete for the first printer, please open the Start screen and type devices and printers.

  5. once the devices and printers opens, you will see the first copy you installed HP Laserjet. Please right click on the HP Laserjet Printer , and then select printer properties

  

  6. under printer properties , you will see the name of the printer on the general tab at the top. Please rename the printer to something that the customer acknowledges that this first printer. Then click on apply and then OK to save the changes.

  

  7. close devices and printers

  8 open the Start screen again. This time, type run. Click on Run to launch the run dialogue box.

  9. in the run box type %temp% , and then click OK. The Temp folder is now open

  10. in the Temp folder to locate the 7z... file. Click this folder to open it. This is the HP Installer package for HP Laserjet printers. Scroll to the bottom of this file and double left click on the P1100_P1560_P1600.exe driver package. The installation program will now open.

  

  11. in the title of the installation window, select "Add another printer. Don't connect not the USB at the moment. Click Next.

  

  12 connect the USB cable for the second printer once the installation window invites you to. After the second installation, please open the Start screen.

  13. in the start screen, type devices and printers. Click on devices and printers to open the window.

  14. in the printers and devices window, you will now see a second copy of your HP Laserjet. Right-click on the new copy and left click on properties of the printer. When the Properties window opens please rename the second copy of your printer. Click on apply then OK to save the changes.

  

  15. close devices and printers

  When the customer print, in the print dialog window they will just now to choose the name of the printer that fits the HP Laserjet Printer they wish to print to.

  

  I know that sounds like a lot of steps, but I wanted to give you as much detail as possible to ensure that this process goes well for you.

  Please let me know if the steps I have provided to resolve your problem. Good luck!

• The shortcut at the top of the page was command + home page and at the bottom was Ctrl + end. Now, I am running Windows 8.1 neither work. Y at - it a keyboard shortcut?

  Ta now the shortcut at the top of the page was Ctrl + home and end to CTRL + end. Now I'm under Windows 8.1 and Firefox Beta or this work. Nor control ++ or Ctrl + 0. (They do not work until I upgraded to Firefox while I was with W8.1). Y at - it a hotkey to get immediately at the beginning and at the end?

  Thank you for your response. It was not the solution because that my Sony Vaio (SVF15N...) is only a few days old. The shortcuts (?) keyboard are slightly different, for example and the 'home' is on the same key as the "go left arrow" also I had the same problem on Chrome as well.

  I found the solution: this is in case someone else needs it.

  "Go to the Summit" is the function + home;
  To end is function + end;
  end of the line is function + rt pointing the arrow;
  beginning of line is function + left arrow.
  Enlarge is command ++ (which seems to work now).

• Problem with shortcut on the Satellite C855D-13N

  Hello

  Can anyone help please?

  My keyboard has had problems in the past and he was sent to Germany for repairs.
  She came back, but after a few moments, the keyboard problem reappeared.
  When you type to access pages Web etc. program expenses are open as if, I think it is called a macro program received access keys.

  I used the keyboard screen to overcome this, but it is inaccessible today.
  Has anyone encountered this problem before?
  Is there a program to get rid of these problem of keyboard shortcuts?

  Thank you in advance.
  Julie

  > When entering for access to pages Web etc program expenses are open as if, I think it is called, a macro program received access keys.

  What (s) did you press on exactly?

  You can control the different characteristics of portable on different F (F1 - F10) keys (also part of the FN key): for example, you can enable or disable the touchpad or you can change the brightness of the display.
  Do you mean these keys?

  The other hand OS Windows supports a feature called Accessibility Center.
  Within accessibility you can adjust these settings to 'make it easier to use the keyboard.

  Go to control panel and click Accessibility Center and find the link to make the keyboard easier to use. Once you're there, you'll want to make sure that the boxes to turn on sticky keys or turn FilterKeys are off which simply means the feature isn't active at the moment.

  Also, you gotta click on set up filter keys or set up sticky keys (or both). Disable filter keys Popup. If you went to the filter keys Setup screen, remove the FilterKeys check box lights up when you press right SHIFT for 8 seconds. To disable the Sticky Keys Popup, uncheck the box to turn on sticky keys when you press SHIFT five times.

  Recommend that you check this Microsoft article about this feature:
  http://Windows.Microsoft.com/en-us/Windows/make-keyboard-easier-to-use

• Adding shortcuts in the atmosphere of the IPad

  I already have an answer to that question appears resolved because I didn't know that I had to push to be 'resolved' or 'useful' which I felt neither one applied when I replied to the response of the user AJ397. But by default chooses resolved FOR you even if it was not resolved. Thus the reason asking him again.

  There is an option in the settings general keyboard that says ' enable shortcuts "I activate. But the only available shortcut is the shortcut of Apple factory. This allows a period at the end of a sentence if the space bar double hit. What is the point of shortcut if there is only one to choose? My IPad Air has 32 GB of memory, storage capacity 26.5 and I'm not sure of the speed of the processor. User AJ397 said that I had to go where I said already, I went and tap shortcuts. There was a gray over a symbol in the corner to tap to add a shortcut. But there is no option for tap. I could only drag the shortcut to on or off. I found in "text replacements" you can type in some combinations of letters that will extend to words or phrases. But it was all I could find. Which is what I wrote in my reply. In fact, you can add shortcuts to IPad-like? 32 GB memory, ability to 25.6,

  An iPad is a different animal from a computer. I'm not familiar wath the ctr + z and the other shortcuts mean in your other thread. What kind of action do you want?

• How can I get my shortcuts to the top on my desk?

  My kids were playing on the computer I have no idea what they were doing, but ALL my shortcuts on the desktop are GONE! I did the right click in an empty space, I made the recovery of the system and they do not work I want to know if there is ANYTHING else I can try to recover my shortcuts. (I'd make them manually, but I don't remember all the shortcuts I've had) Thank you =)

  Right-click on an empty area of the desktop. You will get a menu. Select the rearrange icons (language can be different; I don't have an XP box this time) option and make sure that "Show desktop icons" is enabled. If it is and you still have no icons, you will need to manually create again. Then have a "little talk" with your kids. ;-)
  MS - MVP - Elephant Boy computers - don't panic!

• My window shortcut to the e-mail, Microsoft Office, internet... etc is now gone, what should I do to get it back?

  My window shortcut to the e-mail, Microsoft Office, internet... etc is now gone, what should I do to get it back?

  My window shortcut to the e-mail, Microsoft Office, internet... etc is now gone, what should I do to get it back?

  Assuming you are using Vista...
  Do a system restore. Choose a date on which all the shortcuts are present and work as your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• The Rman catalog must be registered?

  Hello experts,

  Don't you think that would be recorded in the database catalog Rman or not? If so could be in the same Rman catalog or in other different database?

  In the documentation of Rman something about this?

  My 11.2.0.3 Rman catalog database have a controlfile and default 15-day CONTROL_FILE_RECORD_KEEP_TIME.

  My media layer has a 90-day supply. So if I would to restore an older version of 15 days from the catalog in another machine I had to sign up former backups before games.

  Would be, this example above, a real possibility that I had to listen to extracts?

  Thank you and best regards.

  Francesco

  user4339084 wrote:

  Hello

  Thanks for the reply,

  but do you think useful registry the Rman catalog database in the catalog itself? Or is nonsense? a why?

  Thanks and greetings

  Of course, it is absurd to register in the database catalog with himself.  The entire purpose of the catalog is to help the recovery.  So how the catalog database can help in recovery if the catalog database needs recovery.

  https://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmcatdb.htm#BRADV89662