Import management develop presets for the different catalogs

Similar Questions

• Site Recovery Manager is certified for the recovery of the database?

  Hi all

  I is currently exploring the possibility of using the Site Recovery Manager for database DR scenarios.

  Before you go more away and actually try to run some scenarios, I'd be interested if someone of you has tried to do the same thing and if you actually managed to go beyond the situation of disaster, i.e. with primary VM [stop] down, then activating the VM DR.

  Another important aspect, I would be interested is the certification: the Site Recovery Manager is certified for the recovery of the VMS running databases?

  And if so, what data is it certified by: Oracle 10/11, SQL Server 2005/2008, DB2 9.x, etc.?

  If the answers are well known to my question, please just point me to the right source by a link - that should be enough.

  Thank you

  Dan

  At EMC, we use this definition (which is fairly common):

  Uniform crash means that all devices in a given consistency group are writing order in line at a point in time.  If an application can recover from an accident, such as would be seen with a power failure or any other event of failure, then the application can recover from failover.

• When I try to import an mp3 file for the background music for my videos I get the following message: C:\Documents and Music\Karaoke.mp3 Documents\My owner could not be imported.

  Original title: Please help me

  When I try to import an mp3 file for the background music for my videos I get the following message: C:\Documents and Music\Karaoke.mp3 Documents\My owner could not be imported. The selected file is not valid or is corrupted. but before a few years, I used this then all files was import but now this errors can help u answer me please

  When I try to import an mp3 file for the background music for my videos I get the following message: C:\Documents and Music\Karaoke.mp3 Documents\My owner could not be imported. The selected file is not valid or is corrupted. but before a few years, I used this then all files was import but now this errors can help u answer me please

  =====================================
  MP3 files can be problematic in Movie Maker...
  Best bet would be to convert the files to the. WMA
  format before you import into Movie Maker.

  There are many converters available on the net... the
  the following link is an example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your music files on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

• Aftermath - change slides duration to account for the different lengths of video/image

  HI - as you can tell I'm pretty new to Ae - I use programs like hearing and first every day from work but I've never used after effects. Asked me to create a showreel by using After Effects. Like most "newbies" I headed over to a stock site and downloaded the following model https://videohive.net/item/clean-media-slideshow/15003701

  It all seems simple drag and drop the media in each slide / edit text etc. BUT I noticed that /(comps?) slides appear to be of a fixed length - I was wondering if there is a way to change the "timing" of each of these slides to account for the different lengths of video/still (while keeping synchronized animations)? Any help would be much appreciated - here is a link to what I've done so far Craig Jackson - stuff more After Effects - put... | Facebook

  I know there are tutorials on here and on sites like Lynda - and I started to go through them - but any help would be amazing.

  Kind regards

  Craig.

  I see that it's much better now, thank you.

  Here's the problem with the models. To make them easy to customize, they are awful to customize. I know it's not supposed...

  They have complicated - sometimes more than necessary - which makes them easy to drop your own photos/videos. However, this means that if you REALLY want to change something, it's going to be quite complicated. I only buy templates if I want exactly what the model has. Otherwise, it's actually faster for me to build myself something. I have over a decade of experience with After Effects, so trust me on this, don't mess with the model. Without much more experience, he'll just be frustrating.

  What you can do, is switching to the video full screen. You need not stay in the template all the time. Put your video and images in the template, but there where you want it to be longer, put the beginning and ending in the model. Then, after you have made out of AE, go in first and just cut (or use a transition from light leak any) full screen video for executives, want to be longer. TADA!

• The Aperture/iPhoto import plugin also works for the new application 'Photos' of Apple?

  The Aperture/iPhoto import plugin also works for the new application 'Photos' of Apple?

  Hi David,

  The Lightroom Plugin any pictures of pictures.

  However, you can import the images from the folder of the master of Photos.

  Please let us know if it helps.

  Kind regards

  Tanuj Sandal

• import or develop preset?

  Hello - using Lr3.2.

  
  

  If I find a photo developing - is there a "Preset" can I apply to automatically specific changes, such as the 12 clarity / Vibrance 10 / Saturation 8 & some NR and sharpening?

  
  

  I see presets for tihis and who but them have not applied successfully.

  
  

  Thanks for your help!
  

  
  

  Also - just a quick thank you to experienced editors uninterested on this forum.  You helped me more than once.

  You can create your own presets, apply them to develop or use them to import.

  See using LR.

  Gossweiler beat

  Switzerland

• Attachment Manager will work for the e-mail Client?

  Hello

  In my application, I work with mail attachments. So I used for this requirement, Custom Attachment Manager. But in the messages application, what that is the post is there, for those who work only Attachment Manager. So I have different e-mail accounts like gmail, yahoo mail. For those, the menu option is displayed, but it won't start my application. Because it's reching for the run method:

  public void run(Message m, SupportedAttachmentPart p)
  {
  
  }
  

  But as it isn't the Message application, it is not able to open the application. In the documentation, they mentioned that: 'the system calls this method on the thread of the application event Messages'.

  So I would like to know, whether the emails from another application is possible to open? Is there another way?

  And for parts joined, without prefix of x-rimdevice, why it doesn't work?

  If someone gives alternatives, it will be a very useful to me...

  Thank you...

  I merged your son so I can answer in one place.

  AttachmentHandler is able to access the content of attachments that have the file name prefixed with x-rimdevice and for the types that are not natively supported on the device.  This means that you cannot use this approach for .txt files, but you can create a new extension for your attachments, so they are delivered.

  Note that unless the x-rimdevice is preceded by an attachment, it is issued to the device.  The accessory remains on the box to the user mailbox and can be retrieved later by the user or by using AttachmentDownloadManager.  This was done to save bandwidth wireless.  The same process is true for you transfer messages.  When a user sends a message, attachments on the original e-mail are not sent from the device.  They pick up on the side server of the mailbox of the user.  If a user connects to a new file locally on the device, then of course that one would need to be sent from the device.  So if you read a sent, transmitted the message the accessory itself does not exist on the device.

• coordinates in pixels for the different size docs.

  I am a colorsample of pixel on a particular point in a document. The problem is when the photo demesions change the point where I select changes. I was wondering if anyone has an idea to manage the different sizes. Thank you.

  So I thought that my current measures percentage was and included in my calculations for my point. Thank you for your help.

  That's what I used.

  var w = app.activeDocument.width.as ('px');

  var h = app.activeDocument.height.as ('px');

  PW = w * 0,405;

  pH = h * 0.48125;

• Shortcut to the different catalog?

  I use PSE 4.0 and I would like to implement shortcuts on my desktop to open different catalogs. I have a catalog for work and one for personal and it would be nice to open directly to the one I choose. Is this possible?

  Yes. Each catalog is a separate file ending with .psa somewhere on your hard drive. You can create a shortcut to this file and double-click it. You can find the location and name of each catalog file by opening the organizer and by opening the specific catalogue of interest and selecting Help-> System Info.

• Manager of photos for the Office Windows has disappeared

  Photos for the Office Manager Windows disappeared, since I signed up for a free trial of microsoft publisher 2010.  My free trial is over and now my picture Manager is missing.  Where it's going and how do I get it back?

  Well, this is what I'm talking about!  I guess I can do it this way, but it ticks me off that I can't get it back as it was...  I like to use this program to resize my photos for use on fb profiles and other.

  Thanks for your help.  not sure how I can get the viewer publisher on there that is?  What can I system restore to yesterday?

• different icon for the different entry point

  Hi all

  In the taskbar, I want to show the different icon for application launched through different entry point.

  the instructions on this?

  Thank you

  Hello

  I found a solution to my problem.

  You can get application descriptor for the entry points added in the workspace, then using CodeModuleManager you can get the descriptors of application for the entry points for a given module.

  By analyzing this table of entry points for a module, you can find that you want to use and then use this index of entrypoint in homescrren.updateicon to change the icon.

  ApplicationDescriptor[] apDes = CodeModuleManager.getApplicationDescriptors(CodeModuleManager.getModuleHandle("XXXXX"));
  
  //apDes[0] is the default entry point
  //apDes[1] is the first alternate entry point
  //apDes[2] is the second alternate entry point
  HomeScreen.updateIcon(icon, 1); // updateicon for first alternate entry point
  

  Thank you.

• Landing page for the different language in LMS options

  I need to create a landing page with options for different language for the same course that can be loaded as a single LMS-ready package.

  My solution was to create the same in each language, export in the .exe and then create an exceptional Captivate file with links to each of the languages as 'open file/URL', but I've known errors trying to do.

  I saw a person offers to write an HTML index page which links to each. I like the idea of this, but I don't know how it worked in a LMS System.

  Another idea would be to create a single Captivate project as described here: Options multilingual in a single course with Adobe Captivate 5.5 "Rapid e-Learning | Adobe Captivate Blog - but the inability to locate the bar reading/table of contents in each language, I avoid it.

  What are my options here?

  The easiest way to do this is to create a main project folder and publish all your projects DSL SCORM in specific folders, do not publish for zip.

  You create an html page that has links to specific language folders or a non-SCORM project. We could call this menu.html.

  Now you need some SCORM files.

  You need an imsmanifest.xml file to create the LMS link to your menu.html and a metadata.xml with title and description.

  We actually already have structures with the manifest and SCORM files already set up to do this associate.

  The manifest looks like this:

  xmlns = "http://www.imsproject.org/xsd/imscp_rootv1p1p2."

  xmlns:adlcp = "http://www.adlnet.org/xsd/adlcp_rootv1p2".

  xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance".

  xsi: schemaLocation = "http://www.imsproject.org/xsd/imscp_rootv1p1p2 imscp_rootv1p1p2.xsd".

  http://www.imsglobal.org/XSD/imsmd_rootv1p2p1 imsmd_rootv1p2p1.xsd

  http://www.adlnet.org/XSD/adlcp_rootv1p2 adlcp_rootv1p2.xsd ">

  ADL SCORM

  1.2

  Metadata.Xml

  You can contact us if you need help to put it together.

• Cannot open my Adobe suite cS6 Master Collection. Adobe Application Manager keeps asking for the serial number.

  I've never had a problem using basic Adobe on my Mac applications. I had this installed since 2012. Last night, when I try to go to Photoshop, Premiere Pro, or one of the Adobe based products the Adobe Application Manager continues on Popping up. Telling me that the trial is finished, I had to sign up to enter my serial number or to make the Trial Version. And I went through its phases by logging provided the serial number, but unfortunately his telling me I have the wrong info set. I've never updated all Adobe based products, I was still able to use this a week before that my mac is running IOS X.

  My panic, I advanced and uninstalled all Adobe products based on my mac to start cleaning, but now that I install their back to get to the entry number series its telling me the error message even to provide the correct serial number. Can someone tell me what I else I could do, it's very discouraging to say the least.

  Cloud of reading takes up https://forums.adobe.com/thread/2089127 for some ideas

  From the above, you must disable and uninstall and run the vacuum cleaner to remove any trace

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  > downloaded each individually

  As far as I know, it will not work with a Master Collection serial number... it need to install everything and enter the serial number once for all programs

  In the end, you go in CS6 Update Manager and will find the option to tell him to NEVER check the updates and do updates once

  The information contained in my 1st answer about installing CS6 on El Capitan and assistance by an incorrect serial number message, should contribute to this point

  If not, I'm on Windows only saves links to provide assistance... I have no real experience with a Mac

• Preset for the keyword-tag in LR5

  Hello

  does anyone know how to preset the ticks in the AREA of keyword TAG?

  See the image below.

  

  Reason: I would like to change the preset to: only graduation in the first box and the other two empty, while the automatic preset is / was all the three boxes checked as soon as I sign a new keyword.

  Would be a great help. THX

  The system that I use:

  MACBookPro 2.66 GHz mid-2010 with 8GBYTE of RAM

  LR 5.7.1

  OS X 10.11.2

  This means, that klicks change by exporting keywords and no way to set this configuration in the stone for the application?

  No, export a photo does not affect the default values for the keyword checkboxes.   The first three include on export, export containing keywords, and export synonyms, always default for new keywords to check.

  Over the years, many people have complained about the inability to edit several keywords at the same time and change these attributes, but Adobe did not act on these complaints.

• Registration of diagrams for the different storage types

  Hello

  the problem here is this:

  -There are two schemas X and Y, which, for objective reasons, need to be registered for different storage types

  -schema refers internally to the schema X

  X is saved as binary storage successfully model

  There is saved as structured storage and here, the system complains with the message:

  Error starting line: 1 at the controls.

  BEGIN

  () DBMS_XMLSCHEMA.registerSchema

  SCHEMAURL = > SYS. URIFACTORY.getURI('/rdm/rdmElement2.xsd').getURL (),

  SCHEMADOC = > SYS. URIFACTORY.getURI('/public/tech/xsd/rdm/rdmElement.xsd').getXML (),

  GENTYPES = > TRUE,

  ENABLEHIERARCHY = > DBMS_XMLSCHEMA. ENABLE_HIERARCHY_CONTENTS

  );

  END;

  Error report-

  ORA-31091: empty string specified as the name of SQL

  ORA-06512: at "XDB". DBMS_XMLSCHEMA_INT', line 55

  ORA-06512: at "XDB". DBMS_XMLSCHEMA", line 159

  ORA-06512: at line 2

  1. 31091 00000 - "string specified as a SQL name empty.

  * Cause: The XML schema document contains a SQL null name. For

  for example, the SQLName, SQLType, defaultTable attribute values.

  * Action: Make sure all objects specified SQL schema names in the

  XML schema document are valid SQL names. Otherwise, delete

  These attributes of the schema and try again.

  Is it really true that the types of storage should not be mixed? According to the docs, it shouldn't be a problem.

  Everything is fine when the two schemas are registered as the same type of storage.

  Any suggestions that might cause the problem?

  Thank you very much in advance for your help.

  To explain with a simple example, why mixed storage may not work...

  When we record a relational storage schema object, Oracle creates backstage of a set of object types and SQL collection that map XML to SQL data model structure.

  If you understand that it is also easy to understand why your scenario is not supported.

  For example, let's say that this is "schema X":

  Start

  () dbms_xmlschema.registerSchema

  schemaURL-online 'schema - X.xsd'

  schemaDoc =>

  "'http://www.w3.org/2001/XMLSchema" >

  '

  local-online true

  genTypes-online true

  );

  end;

  /

  Without annotations of schema, Oracle will create an object SQL like this (generated by the system name) type:

  CREATE OR REPLACE TYPE "DEV". ("' CommonType5101_T" AS OBJECT)

  "SYS_XDBPD$" "XDB". "' XDB$ RAW_LIST_T."

  VARCHAR2 (4000 TANK) "item1",.

  'item2' VARCHAR2 (4000 TANK)

  )

  NO FINAL CANNOT BE INSTANTIATED

  /

  Now, let's say this scheme registers Y, which uses the schema X Atapez:

  Start

  () dbms_xmlschema.registerSchema

  schemaURL-online 'schema - Y.xsd'

  schemaDoc =>

  "'http://www.w3.org/2001/XMLSchema" >

  '

  local-online true

  genTypes-online true

  );

  end;

  /

  Similarly, Oracle will create another type of SQL object:

  CREATE OR REPLACE TYPE 'Root5106_T' AS OBJECT)

  "SYS_XDBPD$" "XDB". "' XDB$ RAW_LIST_T."

  'Content' 'CommonType5101_T '.

  )

  FINAL CANNOT BE INSTANTIATED

  /

  As you can see, the type of 'root' reference the previously created type 'CommonType5101_T' when registering the schema X.

  If the schema X is registered for binary XML, no extra SQL type is created.

  Therefore, when we try to save the scheme there for the object-relational storage, Oracle will try to retrieve the name of the type that 'Content' attribute of the root must be based on, but since this type does not exist, an error is raised.