Shortcut Windows + Tab does not work

Similar Questions

• I upgraded to latest version firefox 29,0 in windows machine 7. All the user interface looks very good. Undo close tab does not work for me. Is that not been addressed?

  Undo Close tab does not work in windows 7 for firefox latest version 29,0

  You can do this via CTRL + SHIFT + T as well.

  You can try to start Firefox in Mode safe to see if Firefox works correctly without error? You can start Firefox in Mode safe below:

  • Windows/Mac: choose Help > restart with disabled modules
  • Linux: run firefox-safe-mode in the Terminal/Konsole

  If Firefox opens fine with no problems, it is probably one of your extensions that is causing the problem. You can reactivate your modules one by one until you find the one that is causing the problem to be re-activated.

• Since the upgrade of my new tab does not work, I press on the + icon and nothing

  Since the upgrade of my new tab does not work, I press on the + icon and nothing

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• new tab (+) does not work after the upgrade to v 23.0.1 forefox

  I had firfox version 22 I guess... Now, today morning I upgraded to v 23. It displays a message from one of the plug-in is not compatible with wud and therefore be disabled. now later I still once downloaded the plug in to check if its works or not but TI worked (as I had already guessed), or its display in modules or plug-ins.

  Now I don't get why the new tab does not work. Not at all. Its so very annoying. I googled the question and tried to reset firefox and the new tab in subject parameter: config. But nothing helped.

  I think that its because of this plug-in I've read somewhere that the parameters can be getting replaced by one of the defective Add-ons.

  Help, please.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can use the SearchReset extension to reset preferences to default values.

  • https://addons.Mozilla.org/firefox/addon/SearchReset/

  Note that the SearchReset extension runs only once and then uninstalls automatically, so it will not appear on the page "> Firefox Add-ons" (topic: addons).

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

• The new tab (+) does not work, or the file/new tab feature

  The new tab (+) does not work. The function of the file/new tab does no more work. Both had worked correctly until noon today. I haven't added any software, plug-ins or extensions today, I do not have the Ask toolbar. I tried several of the suggestions made on this site, nothing helps.

  This problem may be caused by an extension that does not work in the current version of Firefox.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Recently closed tabs does not work for me

  Recently closed tabs does not work for me. When I go to history-> recently closed tabs is not available and the shortcut does not work. It happened a few weeks ago, and when it happened first, the shortcut would open the tabs in the weeks earlier. I can't find any information on this and would like to see it fixed.

  There are other things that need your attention on the updated the prefs that shows in your list of details of the system.

  Reset the general.useragent.compatMode.firefox to false, and all prefs network.http on the topic: config page.

  • http://KB.mozillazine.org/about:config

  What is the value of the browser.sessionstore.max_tabs_undo pref?

  • http://KB.mozillazine.org/browser.sessionstore.max_tabs_undo
  • http://KB.mozillazine.org/browser.sessionstore.max_windows_undo

• Update of Windows XP does not work, how do I stop the Office 07/10 updates?

  For these last months, the web version of Windows Update does not work with XP. When you click on the button for Express or custom installation, the stalls of system looking for updates. So I had to put windows to warn me of updates instead of going on the site, but now it keeps wanting to download me updates for Office 2007 and 2010, but I do not own these products (I use Office 2003).  I could not stop, even when I ticked the box does not warn me of those more. Finally I went to the site and found an option to disable Microsoft Update, which said I could always download the updates to the site, but I can't because he's trying to force me to re - download Microsoft Update.

  What is going on?  I don't like the new Microsoft Update as it keeps nagging me to download updates for the products that I have not yet owned. How can I update Windows XP only?  This is very fustrating.

  For these last months, the web version of Windows Update does not work with XP. When you click on the button for Express or custom installation, the stalls of system looking for updates. So I had to put windows to warn me of updates instead of going on the site, but now it keeps wanting to download me updates for Office 2007 and 2010, but I do not own these products (I use Office 2003).  I could not stop, even when I ticked the box does not warn me of those more. Finally I went to the site and found an option to disable Microsoft Update, which said I could always download the updates to the site, but I can't because he's trying to force me to re - download Microsoft Update.

  What is going on?  I don't like the new Microsoft Update as it keeps nagging me to download updates for the products that I have not yet owned. How can I update Windows XP only?  This is very fustrating.

  Hi Steve,.

  Follow these steps.

  Go to Start | Settings | Control Panel and double click on automatic updates. I'll explain why later.

  Then, tick the option at the bottom to turn off automatic updates, and then click apply/OK.

  Then, go to start, run, copy and paste this command and click OK: services.msc

  In the list of Services, you can see Background Intelligent Transfer Service ?

  Here's a pix what he looks like.

  

  If it is not listed, follow these steps to register the BITS service.

  Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll

  Research should show this file in the following locations:

  C:\Windows\System32
  C:\WINDOWS\ServicePackFiles\i386
  C:\WINDOWS\system32\bits

  You might only see qmgr.dll in C:\WINDOWS\system32 depending on your configuration.

  Then, go to start, run and copy/paste: regsvr32 qmgr.dll and click OK

  Do the same with this file: regsvr32 qmgrprxy.dll

  Reboot the system and then copy / paste this command into the field run:
  %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf

  If you are prompted to insert the Windows installation CD, ignore this and in the dialog below, replace the path C:\WINDOWS\ServicePackFiles\i386

  If you could only see the file in C:\WINDOWS\system32, change the path to that instead.

  Restart the PC and then go to the Services and you should be able to see BITS in the list.

  Double click on it and then on the general tab, click the Start button to start the service manually. This is just a test to make sure that it works correctly.

  If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
  Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

  Reboot again and try once more to start the PIECES. It should work fine now, but in the unlikely case where it fails again, run the following command, and then press ENTER:
  Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup

  Reboot once more and then do the following.

  Go to this link and install the IE8 December Update:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=41404

  If you use IE7, use this link instead:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=41442

  Finally, go to the Windows Update site and you should be able to download normally.

  If this is the case, re - enable automatic updates in Control Panel.

• Windows Installer does not work with Vista Home Premium 32-bit system.

  My computer did not an automatic update in over 6 months.  I discovered this when I could not install my tax preparation software.  the error message is gone "windows installer does not work, a file may be damaged, contact support windows technique.»

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  sfc/scannow
  

  For the results of the SFC
   
  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

  The system update tool

  Ensures the consistency of the folder WinSxS (Side by Side).

  http://Windows.Microsoft.com/en-AU/Windows7/what-is-the-system-update-readiness-tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To see the results click on Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Reregister Windows install

  Desktop shortcuts are shortcuts to the Windows Installer which then starts the Office program.

  Click Start - all programs - Accessories - right click on command prompt and choose run as administrator. Type

  regsvr32 c:\Windows\System32\msi.dll
  regsvr32 c:\Windows\System32\msihnd.dll
  regsvr32 c:\Windows\System32\msimtf.dll
  regsvr32 c:\Windows\System32\msisip.dll
  c:\Windows\System32\Msiexec.exe/reg

  That you re-register Windows Installer.

• Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

  The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

  When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  Additional resources:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

• "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

  Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  Which edition of Windows 7 is installed on the machine?

  Which edition of Windows 7 you are trying to do an Express upgrade to?

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

  ---------------------

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Error, "the upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade." Enter a different upgrade key. "When you try to upgrade to Windows 7 Ultimate

  I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.

  However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
  "The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  What should I do?

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• After recent, iPhone, 6, update, Windows, Explorer, does not work, see, iPhone

  I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone.   iTunes sees it yet, but windows Explorer does not work.  It seems that some setting has been broken through the update of ios.  A way to solve this problem?

  Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?

  TT2

• The botton to open a new tab does not work. How can I solve this problem?

  next to the tabs, one that opens a new Quick tab does not work, also the ctrl + T keyboard command does not work as low. The only way to open a new tab is right on the mouse, but still click on a link, I can not open a new empty tab.
  Thank you

  Try to uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and the current version of Firefox.

• Satellite A300-1EH - windows installer does not work correctly

  Hello, this is my first post on this forum!

  My windows installer does not work correctly.
  What should do?

  Soryy, but I did not now much on computer systems.
  I have reinstall this installer?

  I'm waiting for your answers.

  > My windows installer does not work correctly.
  What do you mean exactly? You see a mistake? What exactly happens?
  Maybe your CD is scratched or damaged.

• Shortcuts keyboard touchpad does not work after installing Wii XP on Satellite A200-1HV

  Synaptics touch after that installation of Windows XP does not work.
  http://i043.Radikal.ru/0805/C5/09a7324bc1d2.jpg

  On Vista I touch "Two arrows" touchpad lite to the top of blue color, but now it doesn't.
  I installed the driver for Win XP Toshiba web site.

  How about the hot keys on the touchpad?

  From Russia with love =)

  Can be I said isn't right, problem? I'll try to talk about my pain. In Windows Vista Home Basic, when I touch "2 arrows" (you can see it on the screen, Angel of the top-right), after that, touchpad started a blue fluorescence, and after I press 1 to 6 buttons on the touchpad (they were all in the red circle) and starts the application tha. But no, when I touch "2 arrows", nothing has changed. It's information helps solve the problem?
  P.S. I try phone support, but now in Russia, we have vacation =)

  Sincerely your JIABP.