Should I include the Javascripts in a new website?

Similar Questions

• I did an update yesterday and now my lightroom 6 and elements will not open. I get error messages / error 16 on lightroom and we have tried everything, including the creation of a new Director. Help!

  I did an update yesterday and now my lightroom 6 and elements will not open. I get error messages / error 16 on lightroom and we have tried everything, including the creation of a new Director. Help!

  In Adobe Creative Suite or Adobe Creative Cloud configuration error

• onLoad - javascript - where should I include the code?

  Hi, have searched the forum and found that the pleace to include onLoad call should be included in the HTML Body section but when I try to apply changes I get the error message:
  
  1 error has occurred
  
  * You cannot set declaratively developing the slider if you specify an ONLOAD in this attribute. You can set update of the slider programmatically by using the following syntax:
  
  OnLoad = "mystuff (); first_field(); »
  
  My appeal is:
  
  OnLoad = "Alert ('test')"; "
  
  Thank you

  Hello

  Take a look at the Page change the attributes of your page. Now there is a focus of the cursor control - make sure it is set to "do not cursor focus. You can only have one for the body tag onload, so you can't have your javascript and this set to "first item on the page.

  Andy

• Should we include the NIC do not use during P2V?

  There are 2 NIC cards in a physical machine, but only one is used.

  During P2V, should we include both of them and remove one not in use on a virtual machine?  It is because we can choose the bad NIC card if we just choose a NIC card during the P2V process.

  Your opinion is requested.

  Hello

  When you perform a P2V conversion, try to remove all the devices that you do not use from the server.  This is also your chance to allocate hardware resources such as CPU or memory more or less, or adjust the allocated disk space.

  When the conversion is completed, you will need to reconfigure the network settings, so it is not really important which NIC you remove server.

  Best wishes / Saludos

  -

• Should I charge the battery on my NEW phone, or drain before charging them.

  I just got the new Motorola DROID. I use my phone a lot, so I want to make sure I have keep the longest possible battery life. The employee who helped me to the Verison store told me not to worry charing the phone immediately, and it's only something that needed to be done with the old phone batteries. In the box with my Droid came instructions that said to charge the battery for a full 12 hours to ensure the smooth operation and maximum battery life. Which is correct?

  Load completely before use.  12 hours is not fair.  Load until the light goes out.  Air conditioning is not necessary on these batteries.  And, if possible, they should not be drained completely between charges.  There are several good sites FAQ for battery litium on internet.

• "Access-Control-Allow-Origin" when you include the Javascript file in the Portlet

  I'm having this problem

  I have a few lines in my JSP to load JQuery portlets /Search/ folder

  < c:set var = "req" value = "${pageContext.request}" / > "

  "{< c:set var = 'baseURL' value="${req.scheme}://${req.serverName}:${req.serverPort}${req.contextPath} "/ >

  "< script type =" text/javascript"src="${baseURL}/Search/jquery-1.10.2.min.js "> var baseURL =" ${baseURL} "; < /script >

  However, I get the following error

  1. OPTIONS http://fswcs-21:8889 /WorkflowPortlets/Search/jquery-1.10.2.min.js 200 (OK) core - 11.1.1.7.0 - 3009.js:25
  2. XMLHttpRequest cannot load http://fswcs-21:8889/WorkflowPortlets/Search/jquery-1.10.2.min.js. No "Access-Control-Allow-Origin" header is present on the requested resource. So, the original 'http://fswcs-21:8888' is not allowed access.
  3. 
     

  Is there a way to fix this? I tried the setting:

  • response.addHeader ("Access-Control-Allow-Origin", "*"); in the JSP
  • and response.addProperty ("Access-Control-Allow-Origin", "*"); in the doDispatch() method.
    

  
  

  Solved this problem by the following

• Including a javascript using the javascript file

  Come play with particular models of javascript in my CF code when I stumbled on this issue.

  I have two files with that I'm testing.  The javascript file that I want to include is called KDL.js.  The contents are listed here:

  <script language="javascript">
    function KDL_Test(MyString) {
    var MsgString = MyString + "KDL Rocks";
    alert(MsgString);
    }
  </script>
  

  The other model is called KDL.cfm, and it's content:

  <CFINCLUDE TEMPLATE="kdl.js"> 
  
  <script language="javascript">
    KDL_Test("I am here. ");
  </script>
  

  It works fine I get my alert window whenever I run the code.

  What I don't understand is why the javascript alert window is not get called when I use javascript to include the javascript model?

  <script language="JavaScript" type="text/javascript" src="kdl.js"></script>
  
  <script language="javascript">
    KDL_Test("I am here. ");
  </script>
  

  This code generates error messages, but I don't get the popup either as I did with the first include.  Thoughts?

  language = "JavaScript" has been deprecated for years and should not be used.  It has been replaced by type = "text/javascrpt", you already have.  And as long as the .js file in the same folder as the .cfm file, it should work.

  I have never seen anyone CFINCLUDE a .js file, before, so I'm puzzled.  It shouldn't really work, because how JavaScript is a language on the client, and CF is a server side.  But, if it works, I can't argue (although my brain rush to the idea of working).

  Another thing: any content JavaScript code in a .js file must not tags.  It is assumed script since it is inside a file with a .js extension.

  Load the .cfm file in a browser with the developer (F12) tools.  If you use FireFox with the FireBug plugin, you should see a great deal of information as to why it does not work.

  HTH,

  ^_^

• Should I clean the sensor before mounting the new lens?

  Hello guys! Sorry for stupid question, but I'm not sure I know the correct answer. One of the devices that I use is Canon 5 d classic, and there a lot of dust on the sensor and the viewfinder (not unusual for 5di). I just got a new goal, and I wonder if there is a possibility for the dust on the sensor/viewfinder to get inside the lens while filming? Or I have to clean the viewfinder/sensor before mounting? Or just forget to dust as will evertually get inside the lens of dust? Thank you! I appreciate your answers!

  Good advice so far...

  1. you don't have to worry about the use of your lens on the camera. The goal is pretty well sealed against dust, so all the dust that's in the mirror in the camera box is unlikely to migrate into the lens (it is more likely to migrate on the sensor, but even what is low risk). There is no such thing as completely dust free a lens, anyway. A few grains of dust inside a lens have virtually no effect on the images.

  2. you probably should take advantage of your membership CPS to have the camera, cleaned and checked.

  But you can also learn how to clean yourself. Some call it the classic 5 d a magnet 'dust '... Just, I think he's got a big sensor dust get on and does not have a self-cleaning feature because is on later models. It's going to get dusty again, you can bet. So at least you might want to get a blower bulb ("Rocket Blower" is a brand) and learn to use it.

  You probably already know, seen in the viewfinder of the dust is usually harmless. It is usually on the mirror or on the focus screen and will not be displayed in the images taken with the camera (unless she manages to migrate on the sensor itself, which is hidden and protected behind the shutter with the exception of the brief moment when an image is rendered).

  If the dust seen in the viewfinder appears sharp and in short, it is on the focus screen. If it is fuzzy and blurry, it's on the mirror. Unless you know how and have the right tools for the job, it is not a good idea to give the focus screen and nothing more aggressive than a breath of air from a blower bulb mirror. These can be cleaned more thoroughly, but both are very easily damaged: the screen is optical plastic and can be ruined by using the right type of gasoline on it. The mirror is before coating aluminium vaporized, so is very easily damaged. Aside from an occasional breath of air from a blower bulb, I recommend to leave the mirror screen and concentrate only until you have done a professional cleaning.

  A more serious problem to monitor does not light seals. There are seals foam around the edge of the focus screen, which builds the mirror upward against when it is triggered, to keep stray light out of the box mirror during exposure. Over time, these seals foam begins to degrade and may throw particles or even coat of glue holding them in place on the mirror screen and focus. In general, clean up the damage, remove the old and install new foam gaskets are a little tricky, so I recommend that you have any replacement of the foam seal done by a professional. (Also, there are foam seals similar elsewhere inside the camera that are likely to need replacement too, if the joints in the mirror box go wrong. A pro will know what is needed and have the skills to work deeper inside the camera.)

  Time does not always have to send a camera in for a simple cleaning of the sensor, so it's something that you can learn to do it yourself. There are two sites that discuss good detail: www.cleaningdigitalcameras.com and www.copperhillimages.com. The first is maintained by independent, professional camera repairmen who also are providers of the repair industry and sell most of the specialized tools and supplies needed for the cleaning of the sensor. The second part of the merchant site one of special cleaning procedures ("Copper Hill Method"). Both sites have good information. Read them carefully before performing any cleaning yourself.

  If you decide to learn how to clean the sensor yourself, some things you need to know...

  Never use a q-tip common (i.e., "Q-Tip") inside a camera. They throw cotton fibers that can enter and jam of delicate mechanisms.

  Check the manufacturer's website you plan any liquid sensor cleaning aid is formulated and approved for your particular camera.

  No matter what digital camera that has never had the sensor cleaned almost always need a "wet" cleaning first. This is because there is almost always oils on the sensor (actually in most of the cameras the surface to be cleaned is a filter which covers and protects the sensor). These oils are excess thrown out of the shutter mechanism. Any method of "dry cleaning" that touches the sensor will coat oils and make things worse. If a "wet cleaning" is always advocated, first time around.

  It is important to have some the aircraft batteries fully charged before cleaning and work quickly, so that to be able to hold the mirror up and the door is open doesn't work low allowing the shutter to close and the mirror to fall on a tool used for cleaning. Professional cleaners often use a continuous supply instead of a battery, to be sure.

  It is convenient to have a magnifying glass Magnifier and light any for easy cleaning. When you view the sensor at the front, don't forget that the image is upside down and reversed. Thus, for example, if you have seen a job in the corner upper lefhand of your images, when you view the sensor directly you will find straw incriminated in the lower right corner.

  You usually have a variety of tools to do a multi-step cleaning...

  "Fan bulb cleaning' to blow the free particle outside ("Rocket Blower").

  "Wet cleaning" with approved optical and fluid swabs from cleaning to remove oils and the particles more strongly respected ('Copper Hill method kit', 'Pecs Pads", 'Pécs swabs', 'Eclipse' solution) of sensor cleaning.

  'Adhesive cleaning' using a slightly sticky surface take off slightly adhered particles ('Dust Aid').

  'Cleaning antistatic brush' stubborn Claire, remaining slightly adhered particles and to reduce static electricity that attracts dust ("Arctic Butterfly").

  "Deleting individual speck" with a reusable precision tool ("Speck Grabber").

  "Final Polish" always is a last step to remove the haze left by gasoline ("by LensPen sensor pen"). It also helps to discourage the dust sticks to the surface again.

  I've included a few brand names of the products in parentheses as examples. There may be other equally effective products.

  Most of the time I find myself with several or even all of these when I do a cleaning of the sensor.

  See you soon!

  ***********
  Alan Myers

  San Jose, California, USA.
  «Market softly and carry a great lens.»
  MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
  FLICKR & REPROGRAPHY

• I have reason to believe that my PE13 program is corrupted.  If I buy the new version 14.0, does include the full program and the new so it could heal any damaged I have?

  I have reason to believe that my program EP 13 is corrupt in some critical ways.  If I buy the upgrade version 14.0, does include the full program or just the news.  If it includes the full program, I expect to "heal" my corruptions when I download it.  I know you will ask me how my PE 13 program is corrupted.  I'm ready to respond.

  Bill North

  First 14 elements (whenever its output is complete at the global level) is a stand-alone product. It should contain the editor first items 14 and 14 elements Organizer and all the features Adobe wanted in it (new and old to 14). It should have nothing to do with the performance of the elements first 13/13.1. There is no guarantee that your favorite features of 13 will not have been deleted in 14.

  What are the first item 13/13.1 signs and symptoms pointing you to believe that the program is corrupted? What are some critical ways you are talking about? What operating system are you currently using?

  In the circumstances, consider the 14 tryout before purchase. Think of it as a troubleshooting tool

  a. If the 14 works and 13 does not work, then 13 has the problem

  b. If 14 and 13 do not work, then the computer is your target for troubleshooting.

  Looking forward for more details

  RTA

• Convert to PDF from word, the fonts are not included, the word doc record embedded fonts, but conversion does not incorporate fonts?  What should I do to get the embedded fonts?

  Convert to PDF from word, the fonts are not included, the word doc record embedded fonts, but conversion does not incorporate fonts?  What should I do to get the embedded fonts?

  I used times new roman in word 2013.  New file.  Apparently the version of adobe that I use will not incorporate.  I use the version line.  I was told that I have to upgrade to Adobe Pro.  I'm dealing with a patent application, so I can't share the document.  The patent office cannot accept that documents with embedded fonts.  My drawings that have been scanned and then converted are a problem too because I get an error based on the size of the page (23.6 "x 32.4") and I am unable to reduce this size in files from Adobe.com.

  Unfortunately I signed up for this product that get these two converted documents and uploaded only to discover that the conversions will not download.

• I have a new Mac keyboard and it says that I should go to the Apple icon and find the software update.  I don't know of a software update.

  I have a new Mac keyboard and it says that I should go to the Apple icon and select software update.  There is no software update under the Apple icon.  Now what?

  Means click the Apple  top left of your screen. In the menu drop down click on App Store.

  When the App Store opens, select updates from the menu.

• I've upgraded to the new operating system and now my MacBook Pro is in trouble.  Should I uninstall the new system and if so how?

  I have upgraded to the new operating system, El Capitan 10.11.4, and now my MacBook Pro is in trouble.  Should I uninstall the new system and if so how?

  Restore the backup that you did when you replaced the old system

• The module page should include the date at which each add-on has been more recently updated to help diagnose problems.

  Sorry, this isn't a question, but a suggestion. If a conflict exists between the modules, it would be useful to know that it has been updated recently. I often keep track of myself, but it would be easier to have this information on the page Add on.

  "Last update" is available from the display of the modules for each module by clicking on the "More" link... "just below the name of the add-on. Scroll down on this new view of the page.

  An add-on that lists information about all Extensions or Plugins, including the date of update (last updated date shows in the options for the Extension List Dumper as "Date of installation")

  • https://addons.Mozilla.org/en-us/Firefox/addon/extension-list-Dumper/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• My pc is slow to start. What programs should be included at the start?

  My pc is slow to start.  The analyzation said: "several programs at startup.  Question: there are so many programs listed to start at the beginning, I don't know which ones is essential and those that are not.  Can you help me with this?

  Original title: what programs should be included at the start?

  To improve the performance of your PC to run this tool:

  http://support.Microsoft.com/mats/slow_windows_performance/

  It will ask you to stop the startup program, you should NOT disable anti-virus and security software and you may disable those that you don't use regularly might be messanger or other software.

  Do defragnment and disk cleanup

• Where in Windows 7, the list of registered programs (IE, films which have been programmed and should be included) stored in the regestry

  Where in Windows 7, the list of registered programs (IE, films which have been programmed and should be included) stored in the regestry.

  What is the Win7 or Win8? Can we possibly this list to another partition such as set records even?

  background:
  If I could have HDGUARD (www.rdt.de) installed on the MC for my parents.
  Defines the system after each reboot back into a predetermined State.
  Actually a very good thing, but it just always go that the program may be lost.

  ----------------------------------------------------

  Oh sorry, die ich wurde im Englischsprachigen Forum Mehrkornbrot fits.
  Kann man auch eine question stellen, und wie kommt hin da man sleeps?

  SiteKiosk, which is essentially what HD guard, does not allow for this.

  You'd better watch the standard accounts that do not have access to the MCE.