should we empty loading data ODI and move to "Load rules" of Essbase?

Similar Questions

• Moving Cluster to new data center and move ASM Lun

  Hello
  
  My question is for an upcoming project. We want to grow our three existing node on our other data Center cluster. Servers will be moved and would re - ip, but Oracle, CRS and ASM houses remain intact.
  
  We have our ASM on EMC Clariion disks. The idea is to use EMC Replication Manager to replicate the LUNS on EMC Clarion in the other data center and to present them to the cluster.
  
  My question is if it looks like a valid plan, or I think to simplistic?
  
  Will keep it even replicated LUN the ASM disk identity and data in order to be recognized and available in start?
  
  In addition, in order to minimize downtime, we want to move a single node of the cluster first, then others do appear later.
  
  Thanks for your opinions.

  Linux-RAC-Admin wrote:
  My question is for an upcoming project. We want to grow our three existing node on our other data Center cluster. Servers will be moved and would re - ip, but Oracle, CRS and ASM houses remain intact.

  We have our ASM on EMC Clariion disks. The idea is to use EMC Replication Manager to replicate the LUNS on EMC Clarion in the other data center and to present them to the cluster.

  My question is if it looks like a valid plan, or I think to simplistic?

  Will keep it even replicated LUN the ASM disk identity and data in order to be recognized and available in start?

  Hello

  To replicate ASMDISK success, all databases in the Diskgroup must be down or in backup mode.
  Replication starts with the online database (IE database in backup mode hot) needs attention, because all data/redo/controlfile files will be copied in use (i.e. corrupt), be necessary will perform database recovery.

  I think that you already have this doc, but I write anyway.
  http://www.EMC.com/collateral/hardware/white-papers/h2104-EMC-CLARiiON-DB-Stor-Sol-Oracle-10G-Oracle-11g-CLARiiON-Stor-repltn-WP.PDF
  >

  In addition, in order to minimize downtime, we want to move a single node of the cluster first, then others do appear later.

  The plan seems good.
  Build a step by step mapping all changes and good luck.

  Kind regards
  Levi Pereira

• Rename and move folders (photo)

  Even though I am the 'administrator', in fact the only user of my computer, I am unable to rename or move the folders that I have pictures in like, apparently, I need "permission". How can I change this? Thank you.

  Go to the main folder (not the shell of the images folder but all folders with images under that - or to a different folder also) and right-click on the folder and click Properties, click the Security tab.  Add you as of right and do not forget to check the box to include all the files and subdirectories.  Click Advanced, and then do the same in the special permissions section in the bottom half.  Then everything in advance, go to the property tab and take ownership of the folder (and new check box to include all the files and subdirectories).  This should give you permission to rename and move the folders as you wish.  The question is why this happened.  I think it has something to do with Windows Media Player or photo gallery and any changes you make here affect things those and perhaps other such programs - but it's your decision to make.  I could start small with just a few pictures and see how it affects everything else before making the biggest changes as the records themselves.

  Just in case, here is some information on the property and an existing one if you are having problems here.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I need to use programming like ActionScript loop, trigger, and load the data in the movies.  I can do with AE?

  I have been producing auto generate and parameter based animations for an artist over the years using Flash.

  Like this: Zarah Hussain | Animation

  Someone asks now that we use After Effects, but I need to use programming like ActionScript loop, trigger and load data into the movies.

  I can do with AE?  We need the loading animation 3 data values that affect the colors in real time

  Is it: -.

  Flash = online and interactive

  AR = fixed and linear.

  Help!

  Cries.

  You cannot use AE for this kind of things. Outside very limited real-time EI functionality it has not yet officially a dynamic performance of preload beyond the evalFile() hack. None of this makes no sense at all.

  Mylenium

• ESX3.5U4/VC2.5 - move vmdk to adequate data store and extend the drive on the virtual machine

  ESX3.5U4/VC2.5 - move vmdk to adequate data store and extend the drive on the virtual machine

  Objective: move vmdk to store data with adequate storage and then increase storage D: 20G to 100G

  Converter is not available on this architecture. Can I migrate cold vm to the different data store, no prob.

  Question: Without use of the converter, method 3 can be used without a secondary vm? In other words, just by using target vm offline, online, offline? Or is it a problem of signing/OS disk on the Windows Virtual PC?

  I need to move vmdk in different LUN and extend drive vm windows on D: (non-OS drive). Is this possible via the single procedure? Options?

  To use method 3 to http://communities.vmware.com/thread/81121 requires available vm 'secondary', I did not.

  Method 3? Using of vmkfstools and another VM of Windows to extend a drive

  o stop the VM to resize

  o log in the console ESX Server via Putty

  o Type? vmkfstools? X & lt; new size of drive & gt; vmfs/volumes / & lt; storage volume name & gt;. / & lt; virtual server name & gt;. / & lt; the virtual disk name & gt;? That is to say. /vmfs/volumes/Storage1/my_vm.VMDK new disk size can be specified in kilo, mega, or gigabytes and will be the total size of the new disk. So if you want to increase a virtual disk of 20 GB of 24GO you would put 24000 m or 24g

  o the second virtual machine to help stop

  o change the second virtual machine settings and add the first virtual machine hard drive

  o power on the second VM and load the disk management snap-in and verify that the first virtual machine disk has unallocated on it space

  o select Start, run and enter diskpart.exe

  o the command? the list of volume? This will show you all the volumes.

  o select your volume based on the results of the list volume command, IE. ? Select volume 1?

  o type the command? extend? to extend the volume

  o check again the disk management snap-in and the volume is expected to be expanded with a greater ability

  o stop the second VM and remove (do not remove) the record of it

  o turn your first VM and the new space should be there and ready to use.

  Also, I'm already aware of Dell extpar:

  http://www.RTFM-ed.co.UK/?p=1310

  http://support.Dell.com/support/downloads/download.aspx?c=us & CS = 19 & l = in & s = DHS & ReleaseID = R64398 & formatcnt = 2 & starts = 83929

  for VI3, vmoiton of storage is made by RCLI plugin or a 3rd party

  I prefer the plugin

  http://www.virtualizationadmin.com/articles-tutorials/VMware-ESX-articles/VMotion-DRS-high-availability/storage-VMotion-SVMotion-VI-plugin.html

  In addition, if the option to increase the size of the disk in the VIC is grayed out, it sounds like a permissions issue.  Finally, you can not extend the disc using the VIC, if the customer in question has a snapshot.

• ODI and Siebel CRM - Modules of knowledge Oracle Siebel CRM in Oracle Data Integrator.

  Hi all

  I'm looking for information on ODI and Siebel CRM.

  Part 1:

  For the moment, we do not use ODI to load data into Siebel, guys on the team here

  do a lot of PL/SQL for CEF Siebel system tables. (I'm not a person of Siebel)

  Part 2:

  Then these tables of Siebel, I use ODI BI Apps to finally get the data for some dashboards OBIEE.

  I thought that maybe there would be a better way to do part 1 using ODI.

  According to me, that there is a knowledge Oracle Siebel CRM Modules in Oracle Data Integrator.

  http://docs.Oracle.com/CD/E21764_01/doc.1111/e17466/oracle_siebel.htm#ODIAA461

  Here's what we have:

  ODI 11.1.1.7.0 Patch 18204886

  ODI BI Apps 11.1.1.8.1

  Siebel Version 8.1.1

  Pointers to people who have made would be apprecated.

  Eric

  After talking with my boyfriend of Siebel, here's what I understand:

  ODI will load the tables of EIM, which, said, is 75% of employment

  and the last 25% is the .ifb file is generated and ths to run the file on the

  Server Manager.

  Yes, ODI can load data but my guy Siebel

  the ifb file will have to be revised manually...

  When I get a moment, I'll do a small test case and see

  If I can build and run a simple example of this in ODI.

  A small proof of concept.

  Eric

• ODI and Essbase: loading of the connection, Reverse Engineering,.

  Hi, please heeeeeeeelp me to understand how to connect to Essbase, reverse and load data from a file.
  
  I work with ODI and Essbase for the first time. I read ODI documentationbut he did ' t help.
  
  I have ODI 10.1.3.4.0
  I have Hyperion and Essbase
  
  ODI, my client ODI and Essbase server are located on different servers.
  
  I have a working directory.
  In the 'topology manager' in "Physical Architecture" under the "Hyperion Essbase", I created "Data Server" and on the definition tab, I did 'Name', 'Server' (with port), 'User', 'Password '.
  I have nothing in the JDBC tab.
  
  In the physical schema in the definition tab, I did: "Request (catalogue)', 'database (schema)", "Request (catalog of the work)" (the same as the first), "Database (scheme of work)" (the same as the second).
  In the 'Background' tab, I insert a new row and chose the 'context' tha I had created before, and type a new logical schema("").
  (When I was creating the context I just filled the 'Name' and 'Code' context (automatically))
  
  Then I want to reverse the data of the engineer.
  I opened the ODI Designer, created a new model: Definition tab: 'Technology' = Hyperion Essbase, "Logical Schema" = My_Hyperion_logic_schema
  Reverse tab: 'Context' = My_Hyperion_context
  
  When I try to reverse engineer in the opposite selective tab I get following error:
  
  java.sql.SQLException: Driver must be specified
  at com.sunopsis.sql.SnpsConnection.a (SnpsConnection.java)
  at com.sunopsis.sql.SnpsConnection.testConnection (SnpsConnection.java)
  at com.sunopsis.dwg.reverse.Reverse.a (Reverse.java)
  at com.sunopsis.dwg.reverse.Reverse.a (Reverse.java)
  at com.sunopsis.dwg.reverse.Reverse.a (Reverse.java)
  at com.sunopsis.dwg.reverse.Reverse.d (Reverse.java)
  at com.sunopsis.graphical.frame.a.iq.fe (iq.java)
  at com.sunopsis.graphical.frame.a.iq.fa (iq.java)
  at com.sunopsis.graphical.frame.a.iq.l (iq.java)
  at com.sunopsis.graphical.frame.a.eq.actionPerformed (eq.java)
  at javax.swing.AbstractButton.fireActionPerformed (unknown Source)
  in javax.swing.AbstractButton$ ForwardActionEvents.actionPerformed (unknown Source)
  at javax.swing.DefaultButtonModel.fireActionPerformed (unknown Source)
  in javax.swing.JToggleButton$ ToggleButtonModel.setPressed (unknown Source)
  at javax.swing.plaf.basic.BasicButtonListener.mouseReleased (unknown Source)
  at java.awt.Component.processMouseEvent (unknown Source)
  at java.awt.Component.processEvent (unknown Source)
  at java.awt.Container.processEvent (unknown Source)
  at java.awt.Component.dispatchEventImpl (unknown Source)
  at java.awt.Container.dispatchEventImpl (unknown Source)
  at java.awt.Component.dispatchEvent (unknown Source)
  at java.awt.LightweightDispatcher.retargetMouseEvent (unknown Source)
  at java.awt.LightweightDispatcher.processMouseEvent (unknown Source)
  at java.awt.LightweightDispatcher.dispatchEvent (unknown Source)
  at java.awt.Container.dispatchEventImpl (unknown Source)
  at java.awt.Window.dispatchEventImpl (unknown Source)
  at java.awt.Component.dispatchEvent (unknown Source)
  at java.awt.EventQueue.dispatchEvent (unknown Source)
  at java.awt.EventDispatchThread.pumpOneEventForHierarchy (unknown Source)
  at java.awt.EventDispatchThread.pumpEventsForHierarchy (unknown Source)
  at java.awt.EventDispatchThread.pumpEvents (unknown Source)
  at java.awt.EventDispatchThread.pumpEvents (unknown Source)
  at java.awt.EventDispatchThread.run (unknown Source)
  
  What I've done wrong?

  have you had a look at my blog today?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Hi, I installed clean El capitan on my Mac and now I would like to create USB bootable, just in case. Should I re-download El Capitan installer from App store and move to applications. I try to write the line: sudo etc. but it works. Any id

  Hi, I installed clean El capitan on my Mac and now I would like to create USB bootable, just in case. Should I re-download El Capitan installer from App store and move to applications. I try to write the next line: "sudo/Applications/Install\ OS\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume/Volumes/NameOfYourUSB--applicationpath/Applications/Install\ OS\ El\ Capitan .app X\ X\ - nointeraction", but it says: "command not found" no idea how to do it correctly. I think I'm missing what Installer applications...

  When you have completed the installation of El Capitan, the Setup program deletes itself. So if you have not copied somewhere else, you will have again the download on the App Store.

• I have a virtual machine that is resident on two data warehouses, and I need to move

  Okay, I'm trying to reconfigure the storage on a cluster of ESXi to software development, and I fell on a virtual machine that is resident on two data warehouses.  Somehow, the user has configured this thing to have most of the VM files on the data store 5 while all the vmdk but the residence on the data store 1 boot drive.  He probably did it because of the size of the old warehouses of data and the many VMs older than his colleagues left sitting.  Well, now I just reconfigure data warehouses so that there is more usable space, but I can't move this machine a virtual so that I can reconfigure the rest of storage.  (For reference, the old warehouses of data have been implemented in 4 sets of three disks in RAID 3 and a set of four disks in RAID 3 with two drives hot spare.)  For the record: not my idea.  I am reconfiguring them now to be a set of 15 drives in RAID 6, divided into two LUNS on both controllers, with a hot spare.)

  Well, now I need to figure out how to get this VM is spent at one of new data stores.  The data migration store feature does not work.  Any recommendations?

  Hi Dangingerich,

  You can move the VMDK individually with the advanced functionality of storage vMotion allows you to ask the data disk on your new storage space and then have the OS disk track.

  YouTube Video - https://www.youtube.com/watch?v=uhdmdcMmvas

  Screenshots

  

  When you svMotioning click on the Advanced button

  

  Here you can select the individual VMDK and move.

  All content comes from the video by Paul Braren, I annotated only his work.

  Have fun

  @iiToby

• When the signer will sign on the doc that I want to fill the date today, and he should be able to change the date

  Hello world.

  I joined salesforce with echosign.

  I need a help, whenever signatory 2 goes to sign on the doc I want to fill the date today and the signatory 2 should be able to change the date preceding the date of signature. 

  Hello

  So firstly follow the post on the forum to create a formula in salesforce field that creates the date as a string and this merge field in an agreement echosign.

  For example, configure the following field to receive the sfdc date string:
  {{todayeditable_es_:signer1}}

  of course to call the field all you want and also assign the right if not signer signatory 1.

  You can then add a calculated field that compares the date in the field of the todayedtiable against today's date

  {{datecheck_es_:signer1:calc(if(date([today]) > now(), "today larger than today", "continue to next step"))}}

  so, for example today's date is February 12, 2015
  the date entered in the todayeditable field is
  12/02/2015
  the audit date field will say "contine" (or whatever text put you between quotation marks)
  If the date entered has been
  13/02/2015
  datecheck displays "today higher than today.

• Do we need to re - create data load rules if we move from EBS 11 to 12?

  If so, please explain why. Thank you.

  If you switch from EBS 11-12 of the EBS, you need to create a new entry in the source system in ERPi.

  Once the new source system is created, you then need to initialize the source system in ERPi.

  From there, you need to associate it with a format of import and localities in ERPI and your data load rules are then based on location.

• Need data files and rules file to create and load data for sample.basi

  I need emergency data files to build dimensions dynamically and also the rule files for loading data to the application Sample.Basic for Essbase 9. Kindly let me know if anyone can provide them. Otherwise any link frm where I can get it?
  
  Thanks in advance.

  Outline and all the data (calcdat.txt) are included in the zip, so you don't need to rebuild something with the loading rules

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How can I add a space to the toolbar in Firefox 29,0? I can enter a space between the empty boxes and move around, but where can I find an icon 'space' to ADD a space?

  It has been useful in previous versions of Firefox to be able to add (a) space (s) between the icons in the toolbar to create groups of icons and/or icons separated by class or function. In Firefox 29,0, I discovered how 'capture' (drag and drop) a space of areas in the open toolbar and move it to another part of the toolbar. But how do I add spaces to the toolbar? In previous versions, there used to be an icon of the space in the whole of the Customize menu that could drag it to the toolbar for this purpose.

  Sorry, the new UI Australis has abolished the 'space' to customize. There may be an extension for adding 'space', but I'm not aware of it.

• Data load rule for BefImport script getting failed due to the error Code ORA-01858

  Hello guys,.

  I'm trying to load some data from the views created in EBS to HFM using FDMEE with the help of the BefImport Script. To do this, I wrote script below:

  _________________________________________________________________________________________________________________________________________________

  import java.sql SQL

  import sys

  batchName = "Batch_" + str (fdmContext ["LOCNAME"])

  insertStmt = «»

  stmtRS = «»

  If (fdmContext ["LOCNAME"] is "LOC_OIA_FA_CORP1"):

  "insertStmt = '"

  INSERT INTO AIF_OPEN_INTERFACE)

  BATCH_NAME

  YEAR

  PERIOD

  PERIOD_NUM

  CURRENCY

  COL04

  COL05

  COL07

  COL08

  COL09

  COL10

  COL11

  QUANTITY

  ) (VALUES

  ?

  ,?

  ,?

  ,?

  ,?

  ,?

  ,?

  ,?

  ,?

  ,?

  ,?

  ,?

  ,?

  )

  """

  sourceConn = sql. DriverManager.getConnection ("jdbc:oracle:thin:@ebsr12dbcnvgl.abc.com:1541:avc", "pppp", "nnnnn");

  # Limiting the number of rows to 5 during the test runs.

  selectStmt = 'SELECT TEMP_VIEW. PERIOD_YEAR, TEMP_VIEW. PERIOD_NAME, TEMP_VIEW. PERIOD_NUM, TEMP_VIEW. CURRENCY_CODE, TEMP_VIEW. SEGMENT1, TEMP_VIEW. SEGMENT2, CONCAT (TEMP_VIEW. SEGMENT3, TEMP_VIEW. "SEGMENT4) AS SEGMENTX, TEMP_VIEW.SEGMENT5, TEMP_VIEW.SEGMENT6, TEMP_VIEW.SEGMENT7, TEMP_VIEW.SEGMENT8, TEMP_VIEW.NETBAL FROM TEMP_VIEW WHERE THE QUAD IS NOT NULL.

  stmt = sourceConn.prepareStatement (selectStmt)

  stmtRS = stmt.executeQuery)

  batchName = "Batch_" + str (fdmContext ["LOCNAME"])

  While (stmtRS.Next ()):

  params = [batchName, stmtRS.getString("PERIOD_YEAR"),

  stmtRS.getString ("PERIOD_NAME"),

  stmtRS.getString ("PERIOD_NUM"),

  stmtRS.getString ("CURRENCY_CODE"),

  stmtRS.getString ("SEGMENT1"),

  stmtRS.getString ("SEGMENT2"),

  stmtRS.getString ("SEGMENTX"),

  stmtRS.getString ("SEGMENT5"),

  stmtRS.getString ("SEGMENT6"),

  stmtRS.getString ("SEGMENT7"),

  stmtRS.getString ("SEGMENT8"),

  stmtRS.getBigDecimal ("NETBAL")]

  fdmAPI.executeDML (insertStmt, params, False)

  fdmAPI.commitTransaction)

  stmtRS.close)

  stmt. Close()

  sourceConn.close)

  _________________________________________________________________________________________________________________________________________________

  But my DLR gets failed. When I checked the ODI journal for this, I found that it is said: stmtRS = stmt.executeQuery () and display and error code problem:

  java.sql.SQLDataException: java.sql.SQLDataException: ORA - 01858: a nonnumeric character where waiting a digital.

  What is the problem? Kindly help.

  Thank you

  Concerning

  Nishant

  Nishant

  small Question... What version you use.  the latest Patch is now universal data adapter that allows for a direct import of the tables and views without the need to use the Interface open to scene data table

  If you're not on current patch.100 then you should look at the data types for the OpenInterface table... you can see the number.  I guess it's the column YEAR or PERIOD_NUM giving you seizures

  If you run your code in Eclipse before you deploy I'd print our your insertStmt SQL and then try to run in SQLDeveloper.

  

  Hope this helps

  Wayne

• What is different between the ODI and FDQM?

  I need to know what is different between the ODI and FDQM?

  At is simpler ODI is a tool for ELT enterprise scale which can cope with very large amounts of data bwteen heteregeneous systems moving. It requires a certain degree of technical knowledge to use as well and that the user is competent enough with SQL. It isn't really a tool of the end-user and the jobs tend to be lights out processes to the application with a user interface for execution of these works limited. FDQM is a data quaility tool that gives the average end-user out-of-box functionality must be able to transform and load data into various target systems. It is not designed to move very large amounts of data efficiently i.e. multi millions of lines of data as ODI. However, it has a rich user interface that provides an easy to use mapping engine, a repeatbale under control the data loading process and has a host of built elements, declaration and verification, which would have to be built from scratch in a tool like ODI