show a vi that is normally hidden

Similar Questions

• How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point

  How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point. I've been messing around with the without success. I'm under Labview 2012.

  Thank you!

  Townes wrote:

  I can't understand what you mean. I have no formal training with labview. It took me a long time to write the simple program that I joined. Any guidance would be greatly appreciated!

  Its pretty normal for a beginner to take the time to write code. Right-click the map of waveform > Create > property node > historical data, you will get a property node, keep this at the beginning of the code and create a constant. You can also go to the VI properties and > run and select "clear indicators when it is called.

  I recommend you to go through the basic materials of LabVIEW which will give you an understanding on the basics of bases/components of LabVIEW.

• Why use my original USB cable charger for more than a year now is startig to show a sign that it is not compatible with the device? o

  I used without problem my USB cable for over a year, it is original Apple and yesterday began to show a sign that it is not compatible with the device. How can not be supported if it's Apple.

  This can occur if the cable is damaged in any way. See: recharge your iPhone, iPad and iPod touch - Apple Support for more information.

• I received an email from ITunes showing a purchase that I don't have.  The link to cancel the request of credit card etc..

  I received an email from ITunes showing a purchase that I don't have.  The link to cancel the request of credit card etc..

  Don't submit any personal information here, send email to [email protected] as an attachment and then delete it.

  (139293)

• Why filtering by "unused" shows the files that are used in the project?

  Above the list of clips, I choose 'unused '.  I thought that this would be a practical way to show me the files I can delete the library because they are not used.  The thing is, I select this option, I see it shows me files that are certainly in use on the timeline, then what's the point of this?  How can I show actually files that are not used and as long as I can safely remove?

  It shows the unused portions of clips. If you want to remove a clip that has any items used in a project, you're better activation of the clipping indicator used. Any clip with an orange bar has been used.

• My queue is empty and shows no documents that are printing. Printing works fine and I can cancel all documents, but I don't see the list to cancel individual documents.

  My queue is empty and shows no documents that are printing.  Printing works fine and I can cancel all documents, but I don't see the list to cancel individual documents.

  Hi sunshineabove,

  ·          What is the number and the model of the computer?

  ·          What is the service pack installed?

  ·          Do you remember all the recent changes on the computer before the show?

  In the meantime, you can check the link below: http://support.microsoft.com/gp/pc_print_introductiontocanc

• Hello, I have a new Mac Book Pro and I'm not sure how to use it. I just 'downloaded' Lightroom and it is not showing in my toolbar or on my desk... It shows a circle that says Lightroom 5.7.1 and when I click it it brings me to the ini

  Hello, I have a new Mac Book Pro and I'm not sure how to use it. I just 'downloaded' Lightroom and it is not showing in my toolbar or on my desk... It shows a circle that says Lightroom 5.7.1 and when I click it it brings me to the download process initiail... Help!

  Hello

  Please click on the first " Finder " icon on the dock (toolbar below) on your screen, in the left panel, you will see an option, click on 'Applications' on it.

  Under the present, you should be able to see Lightroom if it is properly installed.

  

  Let us know if that helps.

  Kind regards

  Bani

• I have problem in the PDF export to save only the layers appeared only. When I export the indesign file to PDF that contains layers hidden pdf placed, pop up problem when I use the search field in exported pdf file. hidden text of hits from search results

  I have problem in the PDF export to save only the layers appeared only. When I export the indesign file to PDF that contains layers hidden pdf placed, pop up problem when I use the search field in exported pdf file. hidden text of hits from search results to laye

  I answered your question: there is nothing you can do in InDesign. You need to ask in the Acrobat forum I linked.

• For iOS, ipad version shows the folio that was released, but the iPhone is not.

  I am responsible for managing the applications and not at all involved with or know how the process of creation of folio works.

  When I build the app for iOS, iPad version shows the folio that was released, but the iPhone does not show the folio.

  Is it something about the build process or how the folio was created?

  
  

  The folio also appears in the Android app (at least the phone I tested with).
  

  
  

  Thank you

  "Android and iOS viewers have different requirements for the display of the folios. Any size of folio you create can appear in a viewer for Android. Items are put on the scale and Letterbox if necessary. However, on the iPad, the Viewer displays only the folios with a 4:3 aspect ratio. IPhone Viewer displays only the folios with an aspect ratio 3:2 or 16:9 (1136 x 640). »

  Here is the post in full, if you want to learn more: Digital Publishing Suite help | Creating documents for multiple devices

• Why Acrobat 11 NO showing colored backgrounds that I have in my ID files?

  Why Acrobat 11 NO showing colored backgrounds that I have in my ID files? I can see them in Acrobat 10 very well, but I'd much rather spend up to 11...

  q34894.aspx http://answers.acrobatusers.com/PDF-Background-Appears-Grey-screen-paper-Acrobat-X-v10-00- this problem solved has worked for me. Thanks for Facebook and https://www.facebook.com/adobeacrobat

• Why export dump shows at least that the actual size?

  Why export dump shows at least that the actual size?

  A large number of parameters must be taken into account. For example, for an empty table, only the DOF will be exported even if the segments are re-created when import. I'm not sure of what you are looking for and why, but a size of dump export has a little to do with the occupation of segments.
  I suggest you read the note * overview of original export and import utilities [61949.1 ID] * +, it is well explained.

  Nicolas.

• How to show only images that do not have a card slot affected

  I just upgraded to PSE 11.  So far so good.  I am running Windows 7 64-bit, SP1.

  I would like to know how to find all my photos that do not have a card slot assigned to them.

  Is there a way to do this?  It can be built in, but so far I was not able to understand.

  Thank you.

  Title of the message was edited by: Brett N

  Hello

  I think that if you select the view of the places , the pictures shown are those you have already placed. If you then click Add locations (downstairs) film in the upper part shows the images that have not been placed.

  If you then place one of these images, a small icon appears in the film strip until you then close this window (click done).

  Hope that helps

  Brian

• Save the information to textfield form section that can be hidden

  I have a table wrapped in a subform that can be hidden by clearing a check box. Each of the table cells have a textfield added with no caption and you have the possibility of Rich Text turned on. I want the end user to be able to add text in these textfields table, hide the table and save the form without losing the text that they added to the textfields. Currently hiding table erases everything that was added. This is the script that created what I added.

  + PRODUCT - CHANGE (ID:A1B267A9 - DA1B-4024-9 C 78-A7F93B3AE7D6 CRC:3540598859)

  + Type: Action

  + Result1: RemoveInstance("$Node2","currentindex","")

  + Node2: FRM-FRE-06Rev [0]. Subform2_MiddleSection [0]. TDM-Listbox [0]

  + Node1: FRM-FRE-06Rev [0]. Subform2_MiddleSection [0]. Box [0]. CheckBox3 [0]

  + Condition1: CheckBox ("$Node1", "unchecked")

  + ActionName: CheckBox3.change

  If

  (this.rawValue == '0') { }

  this.resolveNode('Subform2_MiddleSection._GDT-Listbox').removeInstance (this.parent.index);

  if (xfa.host.version < 8) { }

  XFA. Form.Recalculate (1);

  }

  }

  //-

  + PRODUCT - CHANGE NOT (ID:9174C15E-EB9E-4ABA-AF9A-937900C5C071 CRC:3118237327)

  + Type: Action

  + Result1: AddInstance ("$Node2")

  + Or: 1

  + Node2: FRM-FRE-06Rev [0]. Subform2_MiddleSection [0]. TDM-Listbox [0]

  + Node1: FRM-FRE-06Rev [0]. Subform2_MiddleSection [0]. Box [0]. CheckBox3 [0]

  + Condition1: CheckBox ("$Node1", "checked")

  + ActionName: CheckBox3.change

  If

  (this.rawValue == '1') { }

  this.resolveNode('Subform2_MiddleSection._GDT-Listbox').addInstance (1);

  if (xfa.host.version < 8) { }

  XFA. Form.Recalculate (1);

  }

  }

  //-

  It worked. Thank you very much for your help with this!

  -Don

• Something is wrong! Start in safe mode, but it turns out that for Normal mode.

  Mac Mini (late 2014)

  Processor 3 GHz Intel Core i7

  16GB 1600 MHz DDR3 memory

  Start drive Macintosh HD

  Iris 1536 MB Intel graphics card

  Monitor: DELL U2713HM, use the Apple adapter to connect to the Mac Mini

  I upgraded from Capitan in Sierra and got the problem that after I pressed the power button, the screen is full white. This problem has occurred on the Sierra, never happened in Capitan.

  I went to the Apple store today, they made a few diagnostic and found no problem. Everything is good. System is fine too. In the Apple store, they showed me to press SHIFT after I press the power button and it will start up the Mac in safe mode. They told me this can sometimes help fixing the boot issue. My Mac actually works very well in the Apple store. I tried the power and turned off twice in the store, and there is no problem. I am happy and come home.

  After I go home, I turn on my Mac, it always has the same problem before you go to the Apple store, after I pressed the power button, the screen is completely blank. So I tried to boot mode safe by pressing Shift and taking until I saw the Apple logo on the screen.

  After I log in, I checked my Mac mode, this is actually Normal mode!

  If I intended to power to the top of my Mac in safe mode but it turns out to be normal.

  If I do not press SHIFT and hold it pressed down after I turn on the power, I'll have just a white screen!

  It works very well in Apple store, but not in my own House.

  Anyone know what is happening?

  What is different between your system and the store? Have you taken your own keyboard & they were they that? If you use a bluetooth keyboard try using a wired USB one instead. Is this an original Apple keyboard?

  Do you have other devices connected? If you delete them.

  Please see the article below from Apple, it has information about starting in safe mode without keyboard (by setting a NVRAM variable). If you enter a work boot, you can put the mini in safe mode from there, via the command appears on this page...

  Try safe mode if your Mac does not end commissioning - Apple Support

  I would like to start trying to make another bootable OS disc - either an installation disc or a complete operating system to see if the Mac can be started OK to a different installation of OS - which indicates if the operating system or disk are part of your question, or if the material is simply unable to work correctly at all.

• You just bought a new iPad Pro 128 GB but shows 113GB capacity is this normal?

  MY new iPad pro128GB shows that only 113 GB - this normal?

  Yes, it's normal. Capacity does not take into account system files.