"Show deprecated Formats...". ' gone? I'm not able to make

Similar Questions

• Are we still not able to make a @icloud account our main email of our Apple ID?

  Are we still not able to make a @icloud account our main email of our Apple ID?

  Why not?
  What seems to be the problem?

  https://appleid.Apple.com

• I have 200 GB of free space on my hard drive but I'm not able to make a new disk partition.

  I have 200 GB of free space on my hard drive but I'm not able to make a new disk partition. When I click on new simple volume in management records and steps of preforms a message (IT IS NOR ENOUGH SPACE ON THE DISK to COMPLETE THIS OPERATION.)   appears.

  Please HELPnot able to make a d

  Assuming that C: is the drive of victory that the size is too small, you need at least 100 GB for the drive to victory.

  (on this particular sys disk win uses 128 GB and with libraries located on a second disk, the disk win itself is 240 GB)

  You might care to use the home Version page free;

  http://www.partition-tool.com/ (EaseUS) because it has more options/capabilities than the tools management integrated disk.

  Have BTW you kept your Vista recovery disks and its key as if you need to reinstall from disc to upgrade to win7 that you will first install Vista

• Show deprecated Formats in the output Module settings do not appear in my output option!

  Hello I am new using Adobe after effects CC 2014 and all guilds help I look for After Effects say replace your video output such as h.264 (MP4) on did I need to click on the checkbox called "Show obsolete Formats in the output Module Settings", BUT go does not appear on my options area. Only three options are in this section but nothing that calls it. Can anyone help me please with this problem?

  See this for an explanation of this change and for the workflow to recommend:

  using Adobe Media Encoder to create videos WMV, H.264 and MPEG-2 for After Effects

• Not able to make a video

  I use iMovie v. 10.1.2 on the iMac with OS X 10.11.5 to make videos so far without problem.

  Now, I transferred my video camera SD card about 500 video clips with the 5.12 GB volume to iMovie. I see all the clips to my project of media with symbols of camera and I managed to compile a video of approximately 1 GB in the timeline panel as usual.

  But I am not able to transfer the content of the finished video on the timeline as a file or to the theater, ect.

  I believe, the clips are not saved in iMovie, so I'm not able to finish the video.

  Please help, I don't know what to do for that my video.

  You are right. The camera symbol indicates that the clips did not matter. Perhaps you did not wait long enough for such import big finish before you begin to modify your project. I would try to import again and give him plenty of time to complete. You could also import the smallest number of clips and several imports.

• Not able to make a video call on Facebook.

  Original title: call video Application program compatibility.

  video calling facebook not working not

  Hi Jessiccataknampak,

  1 did you change on your computer before this problem?

  2. you receive any code or an error message when you try to make video call?

  3. are you able to make video calls with other applications?

  You can check if you can make video calls using any other application.

  If the problem persists only in Facebook, I recommend you contact Facebook support for assistance:

  http://www.Facebook.com/help.php

• Card SD not recognized and asks if I want to format it, but is not able to

  I have a micro sd card which has been formatted on my pc and that you place in my phone.  for some reason any, that my phone no longer recognizes my card and every time I turn on the phone it asks me if I want to format the card.  If I format the card, or no, it is not recognized by my phone... so I turned to my pc once more.  When I put the card into my card reader, I get a message that my card needs to be formatted.  When I click ok, I get an error message that windows is unable to format my drive... I use windows 7 ultimate.  Thank you

  Hi Leon Szczerbinski,
   
  I suggest to format using disk management and check if the problem persists. To do this follow the steps below:

  Step 1:
  1. open computer management by clicking the Start button, click on the Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click computer management.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in the Navigation pane, under storage, click Disk Management.
  3. right click on the volume that you want to format and then click on format.
  4. to format the volume with the default settings, in the dialog box format, click OK, and then click OK again.

  See the link below talking to create and format a hard disk partition
  http://Windows.Microsoft.com/fr-FR/Windows-Vista/create-and-format-a-hard-disk-partition

  Step 2: 1. Here you go to the computer by clicking the Start button.
  2. right click on the SD card.
  3. Select Properties.
  4. click on format.
  5 and follow the wizard that will guide you in the steps.
   
  A good rule is to try to rename the map in the format so that it will be recognized as a new device.

  After formating the card try to place the card in the phone and check if the problem persists.
   
  If the problem persists, you must contact the manufacturer of your hardware or card to replace it with the new card.

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• not able to make an update in photoshop cs5 to s/w

  can anyone help?  Online support chat was not at all helpful.  Instead of solving my problem, the supervisor asked me to purchase an upgrade to cs6.

  My problem is when I'm in the photoshop cs5, I go to help-> update, he refused my updates indicating that my serial no is not valid.  I called the client and chat online, they said that my registration # is a full version and valid.  If this is the case, why I can do an update within the software.  Help, please.  the current version cannot read my my canon camera canon 6 d raw file.  I need to be able to edit my file raw in cs5.

  Your camera must Camera Raw 7.3, and the last version that works with CS5 is 6.7.

  You should use the free DNG Converter to convert your raw files to DNG format, which can be read by CS5.

  Be aware that the works of DNG Converter on the folder level - point to the folder that contains your files. You can not run on individual files.

  Also, be sure to set the compatibility to Camera Raw 6.6 and later in the preferences. This assumes you have Camera Raw 6.6 or 6.7 installed.

  If not, download it here: updates

  where you will also find the DNG Converter.

• Not able to make a new folder

  I have a laptop HP Windows 7.  I tried to create a new folder in several locations photos and Documents, as well as on my Sandisk Flash Drive and it does not allow me too.  I click the button new folder on top of the box of windows Explorer and nothing happens. I even try right-click and scroll down to New but it shows new folder here.

  Thank you very much. I had to try more than one thing, they provided, and finally it worked. I was going to give up, but I'm happy that I kept scrolling down and reading the other posts to see if there was something else that might work.

  If the following message appears:

  "Impossible to import C:\Users\Napoleon Edge\Desktop\NewFolder.reg: not all data was successfully written to the registry." Some keys are open by the system or any other process. »

  Please use the following code:

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\New]
  @= "{D969A300-E7FF-11d0-A93B-00A0C90F2719}".

  [HKEY_CLASSES_ROOT\Folder\ShellNew]
  "Directory"=""
  "IconPath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,68,00,65,00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 2 c, 33, 00, 00, 00
  00.00
  'ItemName"="@shell32.dll,-30396 '.
  'MenuText"="@shell32.dll,-30317 '.
  'NonLFNFileSpec"="@shell32.dll,-30319 '.

  [HKEY_CLASSES_ROOT\Folder\ShellNew\Config]
  'AllDrives '=' '
  "IsFolder"=""
  "AucuneExtension"=""

  and save with Notepad as restoration - Folder_New_Context_Ment_Item.reg

  Worked for me. After trying below and get an error.

   

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\CLSID\ {11dbb47c-a525-400b-9e80-a54615a090c0}]

  @= "CLSID_ExecuteFolder".

  [HKEY_CLASSES_ROOT\CLSID\ {11dbb47c-a525-400b-9e80-a54615a090c0} \InProcServer32]

  @= "ExplorerFrame.dll.

  "ThreadingModel"="Apartment".

  [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\New]

  @= "{D969A300-E7FF-11d0-A93B-00A0C90F2719}".

  [HKEY_CLASSES_ROOT\Folder]

  @= "Folder".

  "EditFlags" = hex: d2, 03, 00, 00

  «FullDetails "=" propystem.» PropGroup.Description; System.ItemNameDisplay; System.ItemType; System.Size ".

  "ThumbnailCutoff" = DWORD: 00000000

  «TileInfo "=" propystem.» Title; System.PropGroup.Description; System.ItemType ".

  [HKEY_CLASSES_ROOT\Folder\DefaultIcon]

  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.

  00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73, 00, 68, 00,------.

  65.00, 6 c, 6 c, 33, 00, 00, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 2 c, 00, 33, 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\Folder\shell]

  [HKEY_CLASSES_ROOT\Folder\shell\explore]

  'MultiSelectModel '=' Document '.

  "BrowserFlags" = dword:00000022

  "ExplorerFlags" = dword:00000021

  [HKEY_CLASSES_ROOT\Folder\shell\explore\command]

  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.

  00, 5 c, 45, 00, 00, 78, 00, 70, 00, 6 c, 00 6f 00, 72, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00,

  65,00,20,00, 2f, 00, 73, 00, 65, 00, 70, 00, 61, 00, 72, 00, 61, 00, 74, 00, 65, 00, 2 c, 00, 2f,------.

  00,65,00, 2 c, 00, 2f, 00, 69, 00, 64, 00, 6 c, 00, 69, 00, 73, 00, 74, 00, 2 c, 00, 25, 00, 49, 00,------.

  2 c, 25, 00, 00, 4 c, 00, 00, 00

  "DelegateExecute" = "{11dbb47c-a525-400b-9e80-a54615a090c0}".

  [HKEY_CLASSES_ROOT\Folder\shell\open]

  'MultiSelectModel '=' Document '.

  "BrowserFlags" = dword:00000010

  "ExplorerFlags" = dword:00000012

  [HKEY_CLASSES_ROOT\Folder\shell\open\command]

  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.

  00, 5 c, 45, 00, 00, 78, 00, 70, 00, 6 c, 00 6f 00, 72, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00,

  65,00,20,00, 2f, 00, 73, 00, 65, 00, 70, 00, 61, 00, 72, 00, 61, 00, 74, 00, 65, 00, 2 c, 00, 2f,------.

  00,69,00,64,00 6 c 00, 69, 00, 73, 00, 74, 00, 2 c, 25, 00, 00, 49, 00, 2 c, 25, 00, 00, 4 c, 00,------.

  00.00

  "DelegateExecute" = "{11dbb47c-a525-400b-9e80-a54615a090c0}".

  [HKEY_CLASSES_ROOT\Folder\shellex]

  [HKEY_CLASSES_ROOT\Folder\shellex\ColumnHandlers]

  [HKEY_CLASSES_ROOT\Folder\shellex\ColumnHandlers\ {F9DB5320-233E-11D1-9F84-707F02C10627}]

  @= "PDF Info column.

  [HKEY_CLASSES_ROOT\Folder\shellex\ContextMenuHandlers]

  [HKEY_CLASSES_ROOT\Folder\shellex\ContextMenuHandlers\BriefcaseMenu]

  @= "{85BBD920-42A0-1069-A2E4-08002B30309D}".

  [HKEY_CLASSES_ROOT\Folder\shellex\ContextMenuHandlers\Offline files]

  @= "{474C98EE-CF3D-41f5-80E3-4AAB0AB04301}".

  [HKEY_CLASSES_ROOT\Folder\shellex\ContextMenuHandlers\ {a2a9545d-a0c2-42b4-9708-a0b2badd77c8}]

  [HKEY_CLASSES_ROOT\Folder\shellex\DragDropHandlers]

  [HKEY_CLASSES_ROOT\Folder\shellex\DragDropHandlers\ {BD472F60-27FA-11cf-B8B4-444553540000}]

  @=""

  [HKEY_CLASSES_ROOT\Folder\shellex\PropertySheetHandlers]

  [HKEY_CLASSES_ROOT\Folder\shellex\PropertySheetHandlers\BriefcasePage]

  @= "{85BBD920-42A0-1069-A2E4-08002B30309D}".

  [HKEY_CLASSES_ROOT\Folder\shellex\PropertySheetHandlers\Offline files]

  @= "{7EFA68C6-086B-43e1-A2D2-55A113531240}".

  [HKEY_CLASSES_ROOT\Folder\ShellNew]

  "Directory"=""

  "IconPath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.

  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.

  00,68,00,65,00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 2 c, 33, 00, 00, 00

  00.00

  'ItemName"="@shell32.dll,-30396 '.

  'MenuText"="@shell32.dll,-30317 '.

  'NonLFNFileSpec"="@shell32.dll,-30319 '.

  [HKEY_CLASSES_ROOT\Folder\ShellNew\Config]

  'AllDrives '=' '

  "IsFolder"=""

  "AucuneExtension"=""

• I'm not able to make a backup of files on cd/dvd during almost a month now.

  All of a sudden, I am unable to execute the file upwards. I restored windows, but does not solve the problem.  The drive seems to be reading, but files are not displayed as backingup. I get to drive #9, after about 7 hours.  Help

  checked my settings:, she questions as to where you want to save your backup? on a hard drive, cd or dvd:

  This is where I always saved a backup. Is no longer a place on the menu drop down. the next option is:

  on a network, on a network is enabled. Apparently, something changed my position.  Something about network discovery, to

  turn on network sharing. I think this is part of HP (network discovery)

  All of a sudden, I am unable to execute the file upwards. I restored windows, but does not solve the problem.  The drive seems to be reading, but files are not displayed as backingup. I get to drive #9, after about 7 hours.  Help

  Forget to take the backup of files with CD.
  Please buy an external hard drive and use it to backup files. Today, a drive Ext. hard can be had for less than $100.
  Allow backing up regular files if you do not have to be present.
  Here is the tutorial to set up the automatic backup:
  http://www.Vistax64.com/tutorials/100133-backup-files.html . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I am not able to make a desktop connection remotely through Citrix

  I use Citrix to connect to my desktop of my computer at home.

  For the last two weeks, I had connection problems. Sometimes it works, but more often, it isn't. I get the error message says the following:

  "The specified remote computer could not be found. Check that you have typed the correct computer name or IP address, and then try to connect again. »

  I know I type the correct computer name because it is saved in my drop-down list. As far as I know, nothing on my desk, computer or computer at home has changed, but the problem is incompatible because sometimes it connects and sometimes is not.

  Basically, the steps I take are as follows:
  1. go on citrix. [company] .com
  2. enter my username and password and click Connect
  3. click on the desktop
  4. I get a pop up message saying I chose to open launch.ica coming http://citrix of Citrix ICA connection. [company] .com. What should Firefox do with this file?
  5. I choose to open with Citrix ICA Client Engine Win32 (default)
  6 then I get another pop up message saying this program has known compatibility issues and Citrix ICA is not compatible with this version of Windows. -C' is the same message that appears still, and it's always worked before.
  7. I click on the program
  8. it brings me to a generic research office running Microsoft Windows Server 2003 R2
  9. I then click on the Start Menu and choose desktop connection remote
  10. I select the name of the computer in my office (which is default) and click on connect

  That's when I get the error message.

  Anyone know what could be the problem and how can I find a solution?

  Hello

  Sorry for the Delisle in response.

  Given that the problem is related to the remote desktop connection, I suggest you contact the assisted support by using the following links:

  https://www.Citrix.com/support

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverTS

  I hope this helps.

• Not able to make the device debugging on Blackberry pearl 8100.

  Hello

  I'm doing device debugging for 8100 and borrowed device via USB to the PC and attach a debuuger using JDE but the device no is not displayed under Debug-> attach to-> handheld.

  Thank you

  Odile Shorff

  Hi Mark,

  Thanks for the help I guess that the drivers had been corrupted, it uninstalled the Device Manager and put it back in place worked.

  Thank you

  Anne Laure Shroff

• Not able to make a checkin to a custom component

  Hi all

  I'm building a custom component which should do a checkin in Webcenter Content.When we are trying to do and test what we get below error every time.

  The error is not so much more descriptive and tried to see if there is any more logs generated in the information system of verification of the Webcenter content but there is no more errors in the Audit log as well.

  Here is the error:

  ! csUnableToCheckIn, (null)! csSecurityGroupNotDefined

  
  

  If anyone has faced this problem before, please let us know the solution so that we can fix it immediately, because it becomes a Blocker for us.

  
  

  Kind regards

  Elena
  

  We have solved this problem by e-mail.

  You do not correctly set dSecurityGroup.

  You do this:

  String dSecurityGroup = "";

  serviceBinder.putLocal (dSecurityGroup, "Complaints");

  You must do this:

  serviceBinder.putLocal ("dSecurityGroup", "Complaints");

  The key for putLocal must be the literal string of the name of the metadata field. You will need to change all your other putLocal both method calls.

  Jonathan

  http://jonathanhult.com

• objects (lines) and text boxes are not able to make larger or smaller

  first: for no reason at all, all my text boxes are now implemented in the text block.  I don't know how that lit.  When I go to 'type '.

  and try to choose "threaded text" it won't allow me to select - it is not highlighted.  So I have no idea

  How to disable this option.  Now, I can't stretch my text boxes depending on what is in them - IE: make bigger or smaller, that is to say: there's only two boxes hanging out - one on each side of the text box and they allow me to drag to enlarge the box - only to move the whole box (before there were 4 boxes to manipulate the size of the text box - a on every corner - now, there only two) and this seems to apply

  in many other objects now.  When I draw a line, I have to make sure that the line is the exact right size because once I have draw - it will not allow me to make it larger or smaller - it only allows me to move it to a different location - I don't understand what's going on

  View > see the bounding box

• not able to make adobe flash player installation

  

  I get this error message below. No matter what. Followed all the instructions suggested. No way to make it work. What should I do?

  

  One which read: I did install Yosemite on mac! Go for it