Show value/Description in the course based on the claims research

Similar Questions

• Pop - up key LOV (description of the poster, returns the value)

  Hello
  
  I use this built in functionality to display data from a table, a very simple, just the id and name. Well, it shows me the ID number, the KP but not the name of the Agency
  
  Select * Agency
  
  It restores 1, 2, 3, 5, 4 (so the PK disordered instead of the column name) then I tried SELECT name of the agencies and again it returns me these numbers. I have developed a huge headache, faced with this. I'm doing exactly as in the demo
  
  I chose popup Lov key displays a description...
  
  then in the Source I tried first as in the example
  
  Only when the current value in session state is set to zero + static assignment value corresponds to the source attribute
  
  and I also tried
  
  always replace an existing value and a column of data
  
  and I also tried this trick of adding values static lov.
  
  nothing, at least I get the PK disordered poster.
  
  Of course, if I run it childish query select * from agencies in the sql script, it displays the table very well but when I try to get this value from the popup selector, it will not
  
  I must say that I have included this function within a form, so that the user who fills the form can click on the popup selector to select a value instead of enter manually (to avoid data inconsistencies)
  
  Does anyone know why this strange thing?
  
  Thank you very much
  
  Alvaro
  
  Published by: user12155340 on November 15, 2009 09:21

  You must rename the agency_name and the agency_id according to your field name in the table. and so the name of the table.

  the syntax must therefore

  Select display_value, return_value from by asc

• Question of value Popup Lov key (description of the poster, returns the key value) by default

  Hello
  
  I have a Popup Lov key (description of the poster, returns the key value) and I want a default value. It is based on a list (user name, id).
  I tried to put the id of the user logged on as default, but what I see on the screen in the field is the value of the id, not the username.
  How can I pass the user id and see the user name?
  
  Thank you.

  Oh! My bad, I thought you are talking about regualt lOVs not popups.

  OK, so that's what you need to do, I tried it and it worked for me:

  your popup LOV > default > type: body of the PLSQL function > and enter a query like:

  declare
  UID number.
  Start
  Select user_id from the uid of the user
  where UPPER (username) = UPPER(:APP_USER);

  This should show username and retune userid.

  Hope this helps,

  Sam
  Please give good answers by marking correct or useful.

• Keeping the description of the table on the evolution and not displaying only not NULL values

  I have the table grouped by MPV and then showing by Fund. I can't get the description section appears for the first Fund and then when he changes nothing only shows funds. When the year changes once again it appears so.
  ex.
  MPV: 2005: 0100AXXXXD
  but when changes in Fund 0100AXXXXD... nothing appears.
  
  Also, I wanted to not include any funds/years that have the value null. I had the following code in, but it does not prevent null values.
  <? If: SEC_ZERO_INDICATOR! = 0 ? >
  
  Thanks for any help.

  Need to see your xml data structure. Can you send me the xml and the RTF file to [email protected]? I'll take a look.

  Thank you
  Bipuser

• View the description of the value of fields instead of the id value

  Hello.
  
  I created a table where the content of the GRAVITY field is a numeric value.
  Then I created a report (SQL query), where I have associated this field a LOV (1 = critical, 2 = major, 3 minor, cosmetic 4 =). I want to know hot to see the description of the value (display value, ex: minor) instead of the numeric value (back), when I submit the report. It's easier when I use a tabular form, but I don't understand how to sami, the same result when you use a normal report (cannot be changed).
  
  My APEX version is 3.1
  
  Thank you
  Daniele

  Hello Daniele,

  The title of 'report Attributes"for the report, click on change to the column. The value ' display as ' "display text (based on LOV, does not save the State) ' under the heading 'Tabular form Element' and select a named LOV or define a LOV under the heading"list of values ".

  Thank you
  Machaan

• dynamically display title based on the value selected in the column picker

  Hi all
  Would it be possible to display the title of the dynamic report based on the value selected in the column picker. Suppose I have two State of the column and region. When I choose the status in the column picker the title of the report will show 'Summary of the situation' when I'll choose the region then the title will change to "summary of the region. Please help me...

  Hello

  Check your mail before I send the entire process with screenshots.

  Concerning

  NGO

• eBay pages now show button to see the full description

  As of today, something on Ebay has changed in coding that affects only Firefox, 35.0.1. OSX

  Before today all the descriptions of items and photos were shown normally, suddenly there is now a «see the description of the complete article»

  button, this ONLY displays to me in firefox, if I view any pages on Ebay with any other browser- Safari, Chrome etc the pages all display correctly.
  

  Ad block I disabled and tested with her at sea, no difference, Ditto for the cookie blocker, on or off makes no difference.

  See the pictures of the screen:

  1. 1 a screenshot of a page in Safari Ebay
  2. 2 an identical snip of the same page using firefox

  Update on this issue:

  All of a sudden, from today, that the problem has disappeared, now each page on Ebay shows the correct way, as he did before.
  I have not installed, updated or changed something in the browser.
  The button "See the description of the complete article" disappeared and a complete description and images all appear by default as they did before.

  Better that I can understand is Ebay had changed the FF code choked on it, and after complaints enough they came with a fix on Ebay for the problem posed their scripts.

• Validation on the value entered for the attribute-based LOV

  Hello

  I use R12 and created an integrator based on a Table based on a table of seedlings open interface. I use an approach that does not involve PLSQL since the Integrator is based on a Table on a table of seedlings open interface and I have so defined it an importer to call a simultaneous program seeded import. I also put in place a LOV component on one of the attributes in the interface.

  My question is, if in the spreadsheet, the user double-click in the cell LOV to extract, and then select a value (for example if they are in copying and pasting quite a few records if they manually type a value) and the value you entered don't is not one who belongs to a group of data from the LOV, this would raise a validation error when loading?

  In this scenario, I would LOV to serve as a validation check to ensure that users can choose only one value that would be in the LOV, even if they have not actually open the popup LOV and selected a value there. I have some research which I would probably need to validate the data against and because my approach is purely a non-PLSQL that I think the best way to achieve this.

  Appreciate your help as always

  Concerning

  Not to worry, I think I answered my own question by developing a little proof of concept.

  As expected, you can enter values that are part of the DataSet LOV. Enter any other value will highlight the line as an error line asking the user to enter a valid value.

  Thank you

• How to navigate to the next page based on the value returned by the method call inside the action attribute of the command key.

  How to navigate to the next page based on the value returned by the method call inside the action attribute of the command key.

  I use JDeveloper 12.1.2.0.0

  < af:button id = "tt_b2".

  rendered = "#{attrs.nextRendered} '"

  partialSubmit = 'true '.

  action = "#{attrs.backingBean.nextAction} '"

  Text = "next".

  Disabled = "#{attrs.nextDisabled}" / >

  private static final String NEXT_NAVIGATION_ACTION = "controllerContext.currentViewPort.taskFlowContext.trainModel.getNext";

  public String nextAction() {}

  If (validate()) {}

  updateModel();

  Return NEXT_NAVIGATION_ACTION;

  }

  Returns a null value.

  }

  Use case is made for model train, which is being implemented based on this blog: http://javacollectibles.blogspot.co.UK/2014/10/ADF-train-template.html

  We define a generic action following in the model, but the action must be called under certain conditions, based on the question of whether all validation controls had been passed on no.

  You can do this in two ways:

  1 returnValue = (String) ADFUtils.invokeEL("#{controllerContext.currentViewPort.taskFlowContext.trainModel.getNext}");

  return returnValue;

  2.

  public String getNextTrainStop() {}

  String nextStopAction = null;

  ControllerContext controllerContext = ControllerContext.getInstance ();

  ViewPortContext currentViewPortCtx = controllerContext.getCurrentViewPort ();

  TaskFlowContext taskFlowCtx = currentViewPortCtx.getTaskFlowContext ();

  TaskFlowTrainModel taskFlowTrainModel = taskFlowCtx.getTaskFlowTrainModel ();

  TaskFlowTrainStopModel currentStop = taskFlowTrainModel.getCurrentStop ();

  Terminus of TaskFlowTrainStopModel = taskFlowTrainModel.getNextStop (currentStop);

  nextStopAction = nextStop.getOutcome ();

  _logger.fine ("train, next stop:"+ nextStopAction ");

  Return nextStopAction;

  }

• srvrmgr syntax: How can I create subsystem named with the name and Description of the values?

  Looking through the library, he did discuss are of syntax that allows you to include the value of name and the named value of the Description of a subsystem/Profile Configuration.  In the screenshot, the circled values were created with the server online order Manager.

  

  On the other hand, pouvez create a definition of the element with a name (full name) and a Description.

  For CompDef, it works:
  create the CompDefTest1_enu component definition for the type of component AppObjMgr component fins group run mode interactive full name 'Test Comp Def Test 1' description 'Test 1 CompDef Manager object.

  For named Subsytem, it does NOT work:
  create named subsystem Test5 subsystem EAITransportDataHandlingSubsys full name 'Test 5' description 'Test 5 Description'

  Someone can tell me if there is a good for a named subsystem, syntax to include the name and Description of the values in the command line, or is the only way to create it manually in the UI?

  Hello

  I spent reviewing aid to create the order in srvrmgr, it does not give the full name and description as parameters for the creation of subsystem. However, as you noted these settings are available for creating components definition:

  srvrmgr > help to create

  Create {component group | compgrp}

  [full name: ]

  [{description | desc} ]

  create {definition component: compdef}

  for {component type | comptype}

  {Component group | compgrp}

  run in mode {batch | interactive | background}

  [full name: ]

  [{description | desc} ]

  [with [ param =[, =...]]]

  [[fixparam =[,...]]]

  create the subsystem named for

  subsystem with = [,...]

  Shelf also has an example of creation of subsystem that doesn't include no description, name and first name:

  http://docs.Oracle.com/CD/E14004_01/books/StoreFwdMsg/StoreFwdMsg_InstallConfig14.html#wp1351472

  In this case I suggest that allows you to create a ticket on My Oracle Support to confirm this srvrmgr does not support the creation of a new subsystem with the full name and description settings and request an enhancement for these settings include request in create statement for new subsystems when using srvrmgr.

  It will be useful,

  WSiebel

• How to display the Description for the selected instead of the ID value

  Hi I have a problem I want to display a description on a combo box list of values instead of the ID when I want to use ir to a formlayout or af:query for estethic

  because I found this link:

  http://vikasadflovdevelop-ADF-Lov.blogspot.com/2012/06/v-behaviorurldefaultvmlo.html?showComment=1389196282800

  https://blogs.Oracle.com/ADF/entry/combo_lov_how_to_display

  The Archives of the Incident: ADF: LOV Description instead of the code

  but none of them works really or I don't no how to make someone can helpme please

  I am new to ADF and jdeveloper

  Hello

  The below tutorial works very well, as I've used in several applications

  The Archives of the Incident: ADF: LOV Description instead of the code

  I guess that u missed a few steps. Just follow step by step as shown in the blog.

  Thank you

  Nitesh

• How to dynamically change values lov to an article based on the button

  Hello

  How to dynamically change the value list of an article based on the button create and apply the changes

  I have the column type of transaction that lov with values as inward, BACK inward outward, outward in the form based on the table...

  in design mode

  I need list to the OUTSIDE inward, in the type of transaction oly column...

  in update mode

  I need the list of BACK inward, BACK outwards in the type of transaction oly column...

  Kind regards

  Pavan

  Maybe something like that for a dynamic LOV

  select label d, label r from
    select 'inward' label  , 'create' chk from dual union all
    select 'outward'       , 'create'     from dual union all
    select 'inward return' , 'update'     from dual union all
    select 'outward return', 'update'     from dual
  )
  where (:P1_ID is null     and chk = 'create')
  or    (:P1_ID is not null and chk = 'update')
  

• Fill in the parts of the form based on the value entered in the first field

  Hello

  I am creating a form where user will enter the serial number of the equipment and I want him to click a button check beside him. When you click on the button check, I want to the Description of the object of the form field to be updated (this info is taken from a MySql DB backend). In addition, the text corresponding to the Site of equipment fields be filled. After reviewing all the information, user should be able to click on a button at the end of the form, and this information must be written in another table. I have attached an Insert record server behavior to the form. Essentially, I want to set a different action on the two buttons on the form. In my opinion it's the same one when we fill the registration form and based on our country, our State drop-down list is filled. It seems that this is doable, but I am not able to figure out how. I'd appreciate any help

  Thank you

  It's very simple if you understand the PHP code. Basically, you give the two buttons of different names and a logic conditional PHP allow you to control what happens. Call a button 'check' and the other 'insert '. If you use the POST method, you control the script like this:

  if (array_key_exists('verify', $_POST) {
    // create a recordset to retrieve the details ready for display
  } elseif (array_key_exists('insert', $_POST) {
    // insert the details in the the new table
  }
  

  If you aren't comfortable coding PHP yourself, the easy way to do it with Dreamweaver server behaviors must use separate sheets. On the first page, simply create a form for the user to enter the serial number. Use the GET method to send the serial number to another page. In the new page, use the parameter of URL containing the serial number to create a recordset to fill the form of insertion. Then apply a server behavior insert record using the POST method to insert the details in a new table.

• Description of the problem: in quick look - I try to send an e-mail - he goes to check French spelling - tried to change to check English - no option to do this - only show is French!

  Description of the problem: I work in out look express- at the present time, when I try to send an email it goes to the spelling of French language - I tried changing the settings to check for in the English language- he don't give me the opportunity to make the list is French!

  When I try to change it in the finishing options go to the box of changing the dictionary custom, he tells me that it won't change until I have send a message. But it offers no option to select the English language.
  How, where, or who should I go for, for free, to make me change this setting? I contacted micro soft and they tell me that they can fix right now for a price $39,00 og tag- I don't think it's fair to pay for something like this so if anyone knows how I can solve this problem for free made me know
  Operating system: Windows XP

  Microsoft broke it and they can not repair it for $39.00. They would have to re - write their Office programs.

  You no longer have the correction spell checking capabilities in some languages in Outlook Express 6.0 after you install the Microsoft Office 2007 or Office 2010 system
  http://support.Microsoft.com/kb/932974

  Outlook Express cannot use the check spelling of MS Word in Office 2007 or newer. A free spell-checking the download is the easiest way to get around this.

  Vampirefo spell check.

  Download from Major Geeks:
  http://www.MajorGeeks.com/download.php?Det=2952

  Or upload it to SnapFile:
  http://www.SnapFiles.com/get/spelloe.html

  You wanted TinySpell or. (Check spelling while typing).

  Download it here:
  http://www.tinyspell.M6.NET/

  Australian English spell checking
  (Also suitable for other English speaking countries).
  http://www.justlocal.com.au/clients/oespellcheck/

  If you have an earlier version of Office, see this:
  http://www.Outlook-tips.NET/archives/2006/20061228.htm

• Description in the file field shows

  Hi Bruce,.

  When you edit the Manfiest.xml file, how can I assign a description to the Commission.  I'm guessing that it is close to the crux of the author...

  < author >

  <! [CDATA [name]] >

  < / author >

  Thank you

  Kelly

  This is the best source I've found for obvious details:

  CEP-resources/ExtensionManifest_v_6_0.xsd to master · Adobe-CEP/CEP-Resources · GitHub