Shutdown problem IdeaCentre A730 and screen

Similar Questions

• IdeaCentre A730 and Windows 8.1

  Hello
  After you have installed Windows Enterprise 8.1 x 64 on Lenovo IdeaCentre A730 when you press NumLock, CapsLock shift, Fn + Scroll Lock is no display on the screen. All the drivers are installed on the official website of Lenovo. What could be the problem?
  Where can I download YouCam, Lenovo PowerDVD, dash of Lenovo, Lenovo Power2Go, Dolby Home Theater... for Windows 8.1?

  can you please give more details, how problems been resolved? I have hace exactly the same issue with capslock/NumLock notifications...

• Pavilion: Pavilion x 360 problems of keyboard and screen

  I'm the unhappy owner of a x 360 Pavilion, prod. lol M9G20EA #UUW.

  Big questions:

  1. About half of the time the screen is upside down when I opened the PC. Sometimes closing and by reopening bypasses the screen. Sometimes a reboot is required.
  2. The hardware keyboard and the touchpad randomly is disabled. A full restart is necessary for reactivation.

  The machine is working. The service company argues that were without material errors, and restored the operating system to windows 8 - who has not solved the problems.

  I see in this forum a lot has similar problems with this model. I've tried every suggestion I could find here. Onfortunately it did not help.

  Just for the follow-up of this: HP transferred my "case" in Danish support, who contacted me by phone and loved very much for help me.
  I send a few drivers for display, chipset and touchpad, with instructions to install them in a specific order.
  Unfortunately, it has not solved the problem.
  I was then absent for various during some time and when I went back to using the machine again, there was an update of display driver of app HP Support Assistant unfortunately the autoinstall has failed, but I managed to find the same product on the HP website driver download and install manually from there. I also found a newer version of the chipset driver, which I also installed.
  Installation of the required drivers, a lot of tinkering, including the assistance of a third party (provided by HP) to completely remove the old display driver, several restarts in safe mode, etc.
  At the time of writing these I have had no problems on keyboard for a while - hoping he disappeared completely. The problem with the screen being upside is still there, but to a much lesser degree. In addition, the orientation sensor seems more sensitive, while just shaking the screen backwards a little wil if he turns in the correct position.
  If this will continue to be the situation, I can live with that.
  But still: (almost) all that work to make a product works as advertised should not be necessary. It should work out of the box or at least with a quick access, automated driver update.
  When I saw a great add to the airport the other day, promising that HP will "continue to reinvent", I couldn't help wishing that they would take a break, in order to ensure that they have already invented is currently working as expected ;-)

• Pavilion Notebook PC 15-079er: problems with sleep and shutdown 15-n079er HP Pavilion Notebook PC.

  Hello world

  I have a huge problem with my Pavilion. I used Windows 8.1 earlier, and I decided to upgrade to Windows 10. I did not like something (can't remember what) and decided to return to Windows 8.1. Almost a year passed, I am again on Windows 10. But if I SLEEP my computer:

  • Screen goes black, everything seems normal.
  • No matter how long wait, fan keeps spinning and power LED, LED Wi - Fi on.
  • Keyboard input does not help. Does not meet what it is.
  • The only thing left to do - stop hard.

  And if I shut down the operating system:

  • Windows normally stops, close all applications, screen goes black.
  • Fan on, led on.

  I did not notice these problems with restarting and the hibernation.

  Two things I've done in this gap of the year:

  • Replacement screen. An old broke. Thanks to my cat...
  • Formatted the drive. I don't think it would do anything diffirent.

  So, any help would be appreciated.

  Thanks in advance,

  Kebab

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• SMax4PNP shutdown problem and sgtray.exe

  When I stop, I'm notified SMax4PNP and sgtray.exe will not end.

  How can I fix it?

  Hello

  · What is the exact error that you receive the correct error code?

  · What is the number and the model of the computer?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  Try the steps listed in the link below and check if it will help: Advanced Troubleshooting for shutdown problems in Windows XP: http://support.microsoft.com/kb/308029

• Hello, I bought Adobe Creative Suite. I joined by monthly payment (€60,49 / month) with a one year subscription. The problem is that my screen says «your order is processing...» ». I bought it yesterday morning and today I am still waiting to

  Hello, I bought Adobe Creative Suite. I joined by monthly payment (€60,49 / month) with a one year subscription. The problem is that my screen says «your order is processing...» ». I bought it yesterday morning and today I am still waiting to complete my installation. I need to work earlier. How can I proceed? Thank you.

  You can use the subscription on a trial basis pending before buying to clear the system.

  If it is not resolved then contact Adobe support directly.

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Satellite L850-E8S - shutdown problems

  Hello everyone

  I bought Toshiba Satellite L850-E8S with Windows 8.0 (for a single language) preinstalled in October 2013. At the moment I can't get stop normally.

  Question: * pressing Shutdown (stop) of charms goes up "Windows is shutting down" and after that the screen turns off but power light is lit and the fan keeps operate.* I stop it by pressing the power button, I really want to quit smoking. (Once I didn't notice that and put the laptop in a bag for a few hours and it of a miracle that no equipment would have been burnt, despite the laptop was hot like the Sun) * the problem started after a month of use, and I didn't think her yet.*

  First of all, I thought that the case concerns him * hybrid Shutdown in the Win8. I have visited many forums dedicated for hybrid stop, proven fruitless discussions. *! AND! I had the same problem on my laptop with a slight difference - loading Win7 and Linux * the monitor stays on (with the lights and the fan on either). *
  Moreover, I also saw a BSOD after a day I bought the laptop. This problem concerned Realtek Audio driver and SRS Premium sound. As I understood the question is drivers conflict. Right now I have no installed Audio SRS premium and see no BSOD, but Realtek audio driver is not stable: the sound either begins to work in a few minutes after starting windows or it does'nt work at all.

  First of all, I wish really that someone to help me with the shutdown problem. All tips are welcome.

  Hello

  Check it please http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm, change the settings described and try to turn off your computer is turned on on a regular basis.

  It works for you?

• A730 white screen at startup

  HI: first post here

  I have several PC A720/A730 and love

  my most recent A730 has developed a problem and I need help:

  At startup, the screen stays black for several minutes: then finally I see WIN welcome screen: otherwise no problems with PC

  Please help me solve this problem: I've read here a similar problem with an A720 and he suggested to reinstall the display driver: who can fix this?

  TIA

  Mark

  
  

• Pavilion 15 laptop: problems with stop and "standby" mode.

  I upgraded from windows 8.1 for windows 64 bit home 10. I had problems with stop and goes into sleep mode and cannot be resolved, then I reinstalled windows 10. Everything worked fine for a few moments, and then the same problem reappeared. I can't stop or put my PC into sleep mode, unless I have first of all to make a restart. After a reboot, I am able to stop or go to sleep mode without problem. If I try to do either without a restart, the screen goes black and the indicator light remains lit. The only way I can get it to start then press on and hold the power button and force a shutdown down, then press the power button to restart the upward. I have another PC, a wafer think that Lenovox has been upgraded to windows Windows 7 10. This PC work fine with windows 10, no problem at all. It's just the HP Pavilion 15 who has these questions. It makes me crazy.

  Look through the tool of troubleshooting possible solutions here:

  http://support.HP.com/us-en/document/c03383935

• Problem with the main screen of firefox

  After the update of firefox to firefox 15.0 16.0.2's problem with the main screen. At the top of the main screen displays the bar (caption bar of the main form) that I have win xp and under this title is bar legend like win 7.

  Firefox is running on Windows Xp, if better, I can send the screen, but I don't know where is possible add image to this error report...

  Okay, the problem has been resolved, problem was with the Tab Mix Plus extension. I have an older version of this extension, because at work may not update directly, because I'm going to the Internet via a proxy. Download, update firefox extension directly through the proxy is not possible... I need to download via the other internet browser, in order to not do it often...

• Why not remove images from my office window and screen saver?

  You have a thorny problem and a bit tricky here.

  A few months ago, at my work, I got a new iMac (for me). As I was getting started upward, furnished and ready to use, at some point it must be synchronized with my iPad, which was nearby. So, when I open my desktop and screen saver system preferences, I see a multitude of images that I took with my iPad and I somehow was stored and transferred to my work machine. One of these pictures is, shall we say, I don't like for anyone to see except my other significant... and it is possible that I can receive an offer for a new job at some point in the near future. Needless to say, I don't want to leave this pic on my machine here for someone else to run into.

  Problem is that I can't remove it. It won't let me select it; -button stays grayed out. The offensive peak is no longer on my iPad, but it remains obstinately to the view from my office window & screen saver system preferences. 1. Why can't select and remove? 2 in the world this image file actually location? I could trash it maybe, if I could find the actual file.

  To sum up, I want this pic from this machine, but I can't remove it now as it is. What can I do?

  

  Open the pictures folder in your user account and browse the library of Photos for the photo of the source and remove it.

• 3G BT Broadband Mobile (Huawei) problem with IE and Firefox, Satellite L300

  The L300 Satellite running Vista 32 bit.

  I have a connection Broadband BT and with WIFI or ethernet at home I can connect to the internet and go without problem.
  I also have the BT USB Dongle for mobile connection far from home, this is the problem.

  I can connect to the internet through the connection manager BT (the software that is included in the dongle and installed on the Satellite L300) and some dongles light and software see I am connected. Too, it is shown on the icons at the bottom of the computer screen.

  Problem is IE and firefox will open, but neither more, "cannot display this page' or 'Connection timed Out' my access provider Internet (BT) said this isn't a matter of Dongle it's a software issue.

  I know that it is typical of an ISP as much as the two BT lines did not know what to say,
  Funny it is... until last week it worked so I was away from home, I used IE then tried to do the full-screen page and then stopped with "cannot display this page". He has not worked since. I then installed Firefox to check that it was not just IE.

  I disabled my firewall and tried to connect, the same problems.
  My ISP said has the laptop computer connection selected an obscure port that IE of Firefox cannot find?

  If anyone can help?

  I'll go to MS and reinstall IE, I think now if the IE software "crushed" and changed some settings has firefox then tried to use the system corrupted settings?

  I have already downloaded again the BT Manager in BT connection

  Interesting problem.

  You are able to back up your data and run recovery?

  Or maybe just try a system restore to an earlier date.

• NB200z shutdown problems

  I am running XP service pack 3 with the NB200-z. This anomaly is intermittent, so it happens _most_ of the time, but not always (it does not seem to the use of a particular program in an obvious way).

  During the shutdown to the bottom/hibernation or switch mode Eve anyway (closing the lid, pressing the power button / stop or start menu) it will close Explorer and all running programs and make it appear a window saying "prepare to stop" (or never, what state he's going in) and it just stays there. The mouse moves, so it did not freeze completely. By pressing ctrl, alt, del fails to bring up the Task Manager, so I don't see what is going on. At this point, my only option seems to be down the power button until the machine turns off.

  Sometimes it will go beyond this point and the window disappears but it crashes and then completely on a blue background Uni where the same mouse cursor will not move. At this stage even once, I have to hold the power button until it turns off.

  There are times where it will happen normally tap down and all the other computer functions seem to work very well?

  I have looked around online to see if anyone else has this problem too, but have found no solution. Microsoft offers online that I disable the drivers one by one and keep close to see if it is a driver but I know it is damaging my HARD drive every time I turn off manually so I do not know what to do. I stopped him fine mode safe but it sometimes will vanish so fine...

  I thought it's maybe someone knows of a recorder of closure that I can use to debug with? If I had a newspaper what file it broke so I could replace or remove the file?

  Thanks a lot for your help :)

  Rob

  Usually bad drivers or badly written apps cause a shutdown problem.

  You have installed all the drivers recently? For example, a USB device or a printer?

  What AntiVirus you have installed?

• Compatibility problem with Vista and iTunes

  I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

  When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

  Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

  Don't know where to direct this question if any help you could provide would be greatly appreciated.

  Thank you.

  Hello

  iTunes is compatible with Vista and there should not be any problem.
  Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
  If your laptop can not boot Vista correctly, then you should try the repair feature.

  Turn on the computer and press F8. Now you will see the advanced boot menu.
  Now, you have many choices.

  As a first step, you should try the option called: last good known Configuration (Advanced)

  If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

  If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

• How to install this update and resolve problems of USB and the touchpad?

  I Equium M50 (59th) and am bitten by an update that pulled my touchpad and keyboard. I did the new installation of XP Home and have all updated drivers and everything goes well. The last update, what I can't understand is for
  Ana _2005_10_24_V1.2 driver is for, Standard Open HCD USB Host Controller... X 2 .........

  The update addresses all kinds of questions like I'm having and is an update recommended driver detective, I use offten.

  The problem is that it says uninstall the drivers for the i have installed already and when I do it it hits off my USB mouse me leaving no able to install the new. When I reboot it installs those I don't want not reinstalled.

  This is the read me, off the coast of the new update and really I don't understand to underdstand what to do... .so here it is?
  Driver revision history:
  Twinhan VP704A Driver Release Notes
  -------------------------------------------------------------------------------
  Note:
  1. in the event that the system hangs when running with VP704A, please install ULI
  Host USB 2.0 in \ULiUSB20Driver driver

  2. for XP/SP1, please update with the patch in
  

  3. in XP/SP1, update driver will crash the system, while the new facility is ok.
  The trick to update driver XP/SP1 is illustrated in the following steps,
  a. uninstall the driver
  b. disconnect and reconnect the USB device
  c. install the driver
  4 to support the controller remotely, please launch Agent.exe in \Agent.
  Further details at \Agent\Readme.txt

  Known issues:
  1 multi-instance is not supported
  2 remote wakeup is not supported
  3. strong use of the processor from analog video/audio capture
  4. bad Signal using color YUY2 format IST
  5 AV sync if audio captured the wrong filter.
  (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)
  6. noise with analog TV and FM Radio
  (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)

  Driver revision history:
  -------------------------------------------------------------------------------
  2005-10-24, version: 1.0.2.8
  Bugs fixed and new features:
  1 is not correctly configured.
  -------------------------------------------------------------------------------
  2005-10-21, version: 1.0.2.7
  Bugs fixed and new features:
  1. the firmware version read FLASH OK!
  -------------------------------------------------------------------------------
  2005-10-14, version: 1.0.2.6
  Bugs fixed and new features:
  1.MUtil - access driver empty part lower part of screen when IST!
  2.MUtil - access HCT pilot check fix crash!
  -------------------------------------------------------------------------------
  2005-10-07, version: 1.0.2.5
  Bugs fixed and new features:
  1 tuner turns off when S-Video, Composite.
  -------------------------------------------------------------------------------
  30/09/2005, version: 1.0.2.4
  Bugs fixed and new features:
  1.agent.exe update for repeat bug!
  2.TI5150 sign up to fix video Format!
  -------------------------------------------------------------------------------
  2005-09-29, version: 1.0.2.3
  Bugs fixed and new features:
  1.A pilot of the trial build for multiple access medium. (in the folder "\Multi-Access")
  Note: The filter 'Audio device USB' provided by the system does not support mutil-access.
  2 reset TI5150 when a new frequency is defined
  -------------------------------------------------------------------------------
  2005-09-27, version: 1.0.2.2
  Bugs fixed and new features:
  1. difficulty I2C unstable access on some devices.
  -------------------------------------------------------------------------------
  2005-09-23, version: 1.0.2.1
  Bugs fixed and new features:
  1. analog TV becomes sometimes darker.
  -------------------------------------------------------------------------------
  15/09/2005, version: 1.0.2.0
  Bugs fixed and new features:
  1. difficulty of installation INF for Windows 2000.
  2 FM scan radio policy changed!
  -------------------------------------------------------------------------------
  13/09/2005, version: 1.0.1.9
  Bugs fixed and new features:
  1 USB string serial number not visible with USBView, updated firmware required.
  2. political analysis of FM radio, return of release if PLLOffset > = 9 x 12. 5 kHz
  -------------------------------------------------------------------------------
  13/09/2005, version: 1.0.1.8
  Bugs fixed and new features:
  1. after the passage between AV/D/A several times, video display becomes dark in THDTV 2.61
  -------------------------------------------------------------------------------
  12/09/2005, version: 1.0.1.7
  Bugs fixed and new features:
  1. improve the performance of check channel lock status
  2 pinnacle INF Fix.
  -------------------------------------------------------------------------------
  2005-09-09, version: 1.0.1.6
  Bugs fixed and new features:
  1. Add an audio initialization function.
  -------------------------------------------------------------------------------
  2005-08-31, version: 1.0.1.5
  Bugs fixed and new features:
  1 separation of PAL and NTSC resolution mode.
  -------------------------------------------------------------------------------
  2005-08-30, version: 1.0.1.4
  Bugs fixed and new features:
  1.AvgTimePerFrame.
  2 frame drop.
  3 pinnacle inf file HCT chkinf fail.
  -------------------------------------------------------------------------------
  2005-08-22, version: version 1.0.1.3
  Bugs fixed and new features:
  1. add remote control interface in digital source filter.
  2.A new remote test tool that contains of the source code in \Test_RC.
  -------------------------------------------------------------------------------
  2005-08-16, version: 1.0.1.2
  Bugs fixed and new features:
  1. Pinnacel & Twinhan driver & file reorg.
  2.VP704A_BDA_Test tool, add a test to the system code.
  3. set the standard infrared protocol of "IRSTANDARD", "IRSYSCODECHECK1" registry keys in the INF file.
  4 firmware update
  -------------------------------------------------------------------------------
  2005-08-15, version: 1.0.1.1
  Bugs fixed and new features:
  1 serial number feature is lost when the audio volume of the TV control
  2.RC6A support CIR
  (This firmware uses GPIO3 (M9207 pin 80) to decode the RC6 Protocol.
  The material must be reworked to connect the M9207 80 pin to the CIR module and the actual
  EEPROM must be flashed with \Firmware\M9207.bin)
  3 Serieal, MAC address and name of device OEM taken in charge.
  Please see for more details on the \Firmware\readme.txt.
  4 Ioclt example source code included.
  -------------------------------------------------------------------------------
  08/08/2005, version: 1.0.0.10
  Bugs fixed and new features:
  1. increase audio volume analog TV.
  -------------------------------------------------------------------------------
  04/08/2005, version: 1.0.0.9
  Bugs fixed and new features:
  1. analog TV Video mode failed.
  -------------------------------------------------------------------------------
  2005-08-03, version: 1.0.0.8
  Bugs fixed and new features:
  1.off - centerf frequency scan + / 125Khz
  2 difficulty program a copy scanned in MCE.
  -------------------------------------------------------------------------------
  02/08/2005, version: 1.0.0.7
  Bugs fixed and new features:
  1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' bug
  -------------------------------------------------------------------------------
  2005-07-28, version: 1.0.0.6
  Bugs fixed and new features:
  1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' support
  2. improve the stability of I2C communication.
  3 unify signaling resistance & quality as a THBda ioctl interface.
  4 capture filter lock state control.
  -------------------------------------------------------------------------------
  2005-07-28, version: 1.0.0.5
  Bugs fixed and new features:
  1. the same strength & quality signals as VP7046.
  2 debug build pilot
  -------------------------------------------------------------------------------
  2005-07-21, version: 1.0.0.4
  Bugs fixed and new features:
  1. put the INF update.
  -------------------------------------------------------------------------------
  2005-07-20, version: 1.0.0.3
  Bugs fixed and new features:
  1 improve performance in PCM4
  2 passage of the analog TV Mode to FM Mode failure
  -------------------------------------------------------------------------------
  2005-07-04, version: 1.0.0.2
  Bugs fixed and new features:
  1. production tool FM test OK!
  --------------------------------------------

  And here is the Readme file from the other file in the update?

  ************************************************** ************************************************
  ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME, Windows 2000 and Windows XP
  ************************************************** ************************************************

  ----------------
  INTRODUCTION
  ----------------

  This driver supports the host EHCI ULi controller under Windows 98 SE, Windows ME, Windows 2000
  and Windows XP.

  -------------------------
  CONTENTS OF THIS DOCUMENT
  -------------------------

  1. installation instructions
  2. uninstall instructions

  ----------------------------
  1. installation instructions
  ----------------------------

  (Windows 98SE & Windows ME)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver files in your Windows system, and then restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver files to your Windows system, then turn off your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  (Windows 2000)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will install and load the driver and you do not have to restart the
  computer.
  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver in your Windows system files, before turning itself off
  your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  (Windows XP)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -Click "NEXT".
  -This program will install and load the driver and you do not have to restart the
  computer.
  -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
  Hub. " Please select "Install the software automatically (recommended)" and then
  Click 'Next' to continue the installation.
  -This program will install and load the driver and you do not have to restart the
  computer.
  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver in your Windows system files, before turning itself off
  your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller', proceed with the installation.
  -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
  Hub. " Please select "Install the software automatically (recommended)" and then
  Click 'Next' to continue the installation.

  Notice:
  If you can not configure driver successfully. Please restart your system, then follow
  steps to reinstall driver above.

  ------------------------------
  2. uninstall instructions
  ------------------------------

  1. open the "Control Panel" folder.
  2 call the "Add/Remove Programs" icon
  3 choose the "ULi USB2.0 Driver" section.
  4. click on the "add/delete" button to remove drivers.

  -----------------------------------
  Change list:
  -----------------------------------
  1.74
  1 fix this multi-interface keyboard may not be detected on the USB 2.0 hub.
  2. support all USB2.0 Host Controller.
  1.73
  1 problem on Win98SE, blue screen when you unplug a USB 2.0 Scanner after scanning image.
  2 solve problem on Win98SE, blue screen when you unplug a few Scanner USB 2.0 USB 2.0 Hub after scanning image.
  3 fix on Win98SE, blue screen when copying of files through the hub of UH-204 SUNBOX.
  4 solve problem as wirless lan will disconect when the plug in usb device.

  1.72
  1 fix that system crash when HD USB copy large files.

  1.71
  1. improve the management of power in Win98 / Me.

  1.70
  1. improve the devcie detection function.

  1.62
  1 solve the problem that can not operate a USB HUB USB 2.0 disk when the system resume inactive.

  1.61
  1 solve the problem that some device under USB 2.0 HUB is not found if resumes suspension system.

  1.60
  1. in support of functions power management when a HUB with the USB plug in device
  a root HUB.

  1.57
  1. Fix USB with USB 2.0 HUB floppy cannot detect problem.
  2. fix audio problem that can not display smooth when peripheral USB connect to the system.
  3. fix system cannot detect DVICE USB when the USB device attached to the system in
  suspend mode.
  4 fix when root USB HUB have a full load, USB HD sometimes
  failure of the transaction.

  1.56
  1 fix that device of DVD decoder cannot display correctly.

  1.55
  1. fix OTI USB 2.0 drive hand cannot detect question.
  2. attach the USB mouse cannot be used after the resumption of hanging.

  1.54
  1. to improve the safety of the driver.

  1.53
  1. transfer bulk fix may stop if the USB device is connected to the USB 2.0 hub
  2 difficulty USB 2.0 mass storage device cannot access after the release of the standby mode if there is an another USB 1.1 existing device

  1.52
  1 correct fault of system pages when accessing the storage of mass Win98SE or scandisk device failure when selecting
  automatically fix file system errors
  2. fix system may hang on in Win98SE / ME if USB 2.0 cardbus card is plugged

  v.1.51
  1. to improve the compatibility of USB 2.0 card reader.
  2. fix USB IDE devices are not accessible after the release of the standby/hibernation mode.

  v1.50
  1. improve the transfer block

  v1.48
  1. difficulty of installation of the USB 2.0 LAN driver hangs up
  2. attach a USB 1.1 card reader cannot be identified when plugged into the USB 2.0 hub
  3. fix some laptops starting hanging Win98SE

  v1.47
  1. improve the performance of bulk transfer.
  2. fix the failure of USB 2.0 Preview in bulk webcam.

  v1.46
  1. support USB 2.0 and 1.1 devices isochronous
  2. fix system hang up when restarting system if the USB 2.0 host controller is disabled in Win9X / ME
  3. fix system hang up when you uninstall the driver if there is USB 2.0 connected under Win2K/XP devices
  4. improve the capacity of the device detection in Win9X / ME

  v1.45
  1. fix system hang up when the mode standby ACPI.
  2. attach the mouse sometimes does not disappear when it is unplugged.
  3. fix the failure of detection of composite devices Win9X and improve device composite Win2K/XP

  v1.44
  1. composite crutch
  2 improve the detection of devices

  v1.43
  1 improve the failure rate of transfer IDE read/write with USB 2.0 to IDE bridge on the platform of PC card
  2 difficulty at high peripheral speed detected as full-speed device
  3. fix some problem of failure detection USB mouses
  4. fix some problem USB 2.0 Hub failure detection
  5 difficulty Win98SE crashing if ULi EHCI 1.42 is installed

  v1.42
  1. fix PC Card eject hang up in Win98 / ME
  2 difficulty of interruption/resumption hang up in Win98
  3 sometimes solve USB 1.1 device cannot be detected if OS starts with USB 2.0 and 1.1 devices plugged
  4. fix some failure detection of PC Card USB 1.1 devices

  v1.41
  1. Add new feature that system can install the driver ahead of the device is plugged in.
  2. fix PCMCIA OHCI controller resources affect problem on Windos ME.

  v1.40
  1. support Win9X/ME / 2 K/XP with ULi USB 2.0 driver.
  2 fix PCMCIA EHCI controller detection device USB 2.0 problem in Win9X / me.

  v1.32
  1. Fix problem that pilot cannot detect the Microsoft driver in Windows XP
  If the path of the OS is not c:\windows.
  2. Fix problem that pilot cannot detect the USB 2.0 controller device in a system.

  v1.31
  1. Fix problem that driver cannot install on Windows 2000.

  v1.30
  1 fix than Win9X / shows ME no USB 2.0 hub.
  2 solve the problem that hang up when the second entry in Win9X S1 with HID device connected.
  3 Fix problem that sometimes when you click on "search the hardware changes.
  for PNP ULi USB2.0, controller, the system will inform you the usbehci.sys
  file is not found.
  4. Fix problem that v1.20 can't find no EHCI controller to install the driver for after different
  verison of ULi EHCI controllers devices are connected and disconnected.
  5 install the driver support for several features of controller EHCI ULi existing on
  system at the same time.
  6. determine Win2K/XP shows hub USB root for USB 2.0 hub.

  v1.20
  1. support ULi USB 2.0 for Windows 98SE/ME/2000/XP host controller driver.

  ULi Coporation. (ULi) web sites:
  http://www.Uli.com.tw/ (Taiwan)

  CAN SOMEONE TREAT ME LIKE A CHILD OF TWO YEARS AND GIVE SOME ADVICE AS TO HOW TO OBTAIN THIS UPDATE.

  I'D VERY GRATEFULL AND KIND OF THINK IT would BE BENEFICIAL to a LOT MORE than PEOPLE LIKE I SEE a LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSE to FIX.

  It is said above 2 relevant and 1 right ANSWER available...

  I'm new here, so anyone could direct me to these answers?