SHUTDOWN: waiting for active calls to complete.

Similar Questions

• VMware-vim-cmd: waiting for orders to be completed?

  Hi all, I adapt a backup script I made for VMware Server 1.x to VMware Server 2.x and I'm having trouble doing ordinary things like 'suspend' or "create a snapshot" "a VM from starting.

  There are several ways to do the same thing in a certain way does not require any authentication, others indeed require authentication, for example, to create a snapshot, you can:

  VMware-vim-cmd vmsvc/snapshot.create 'id of the virtual machine.

  or

  vmrun-h https://127.0.0.1:8333 / sdk u user-p password of snapshot "[datastore] /vm_path/vmx_name.vmx '

  The problem with vmware-vim-cmd approach is that it does not wait for the command to complete, and is not a welcome feature in a script.

  Instead, the vmrun command wait until the end, but to use it in a script, you must also include the identification of the user and password information in the script, and it is not welcome.

  So the question (as shown in the topic) is: is it possible to make orders of vim-vmware-cmd to wait until the end?

  If someone knows how to do that I would be very grateful

  Thank you for reading,

  10nico

  The vimsh and the vimsh wrapper vmware-vim-cmd is not officially supported by VMware, that being said, I agree that it should allow you to check the situation, etc. It can be a pro/con and depending on how the call command, the wrappers actually communicate to the VI API server, and if you look at the VI API there are all both blocking and non call.

  Vmware-vim-cmd, the command is executed and returns to the shell for most. You might be able to monitor the tasks that is created and ensure that it is completed, but I have not played too much with it.

  [root@himalaya scripts]# vmware-vim-cmd vimsvc
  Commands available under vimsvc/:
  auth/             login             task_cancel       task_list
  connect           logout            task_description
  license           property_dump     task_info
  

  Again, these are undocumented, unsupported and the behavior will vary =)

  I advise to use the VI API (Powershell or VI Perl Toolkit) to accomplish your tasks, and you can even take a look at some of the utilities that are available with the VI Perl Toolkit Utilities: http://www.vmware.com/support/developer/viperltoolkit/viperl15/doc/perl_toolkit_utilities_idx.html

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• iMessage is stuck at waiting for Activation.

  Hello

  I have iPhone 6 Plus with iMessage stuck waiting for activation. May that what's wrong with it? These are the work with other vendors if I insert the sim card. Is it something to do with the question SMS relay or something else?

  Need help to solve my problem.

  Thanks in advance.

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• iMessage and FaceTime says "Waiting for activation...". »

  My 5s iPhone keeps saying "Waiting for activation...". »

  How to solve this problem?

  See the following: If you get an error when you try to activate FaceTime - Apple Support or iMessage

• Wait for activity on front panel

  Hello

  I have a while loop with a counter (shift register), in which Im can choose how many times its going to count. This loop is used to allow a data in a economy another loop via a local variable to activate it on the VI "write to messurement.

  Now, I wish that my loop counter to count the selected number and then stop, until I press some activate button on the front panel.

  My idea is to use the "wait for activity of façade" in the loop of the meter, to "stop" the loop when the number cunted is reached and then continue, if a key is pressed.

  But I can't really understand how to operate :-(

  
  

• I bought the subscription Amazon to adobe cc says, but is waiting for activation by the seller

  I bought the subscription Adobe cc says, but is waiting for activation by the seller

  Hello

  Your account is created in Panama as a country, please create a new account, and select U.S. as the country.

  Following the steps described here change the country associated with your Adobe ID which should solve the problem.

  ^ Ani

• Script to wait for Clone task is completed

  Good day, as part of the post, I run a command that enables the NIC and sets the right Port-Group of cloning process. I put a sleep command in each environment is diferrent, so I find myself always change this duration of sleep because the cloning process does not end in the time of sleep and the rest of the script fails. So in order to get rid of the sleep control that I want to capture the CloneVM_Task and pass this parameter to wait-task that will force the completion of the ClonVM_Task. I could just make sure no other tasks are running but this task, but as we all know that alays can't be the case. So that's what I did.

  I begin a deployment of FVO to have an another long running task. Then I run the script.

  If ((Get - PSSnapin - name Vmware.VimAutomation.Core - ErrorAction SilentlyContinue) - eq $null) {Add-PSSnapin "Vmware.VimAutomation.Core"}

  # Virtual Center details
  $server_address = "MYvCenter name" or IP

  SE connect-VIServer-Server $server_Address - user username-pass password - WarningAction SilentlyContinue

  
  #Create Master VM Templates
  #
  # Here we import the CSV file with the account information and he piped in a Foreach-object
  # Creating a Variable that imports the csv file that contains all data of the virtual machine

  CD "e:\Scripts.
  $InputFile = import-Csv "E:\scripts\mycloneinput.csv".
  $InputFile | {ForEach-Object

  $ip = $_. VM_IPAddress
  $GName = $_. VM_Guestname
  $TName = $_. Template_name
  $HName = get-VMHost "myhostname" # 1 first Select
  $Desc = $_. Description
  $Dstore = $_. Datastore_Name
  $Spec = $_. Customization
  $Folder = $_. Folder
  $Sfolder = $_. Subfolder
  $NIC = $_. NIC
  $NIC_Lable = $_. NIC_Label
  $Gateway = $_. NIC_Gateway
  $SubnetMask = "255.255.255.0".
  $DNS1 = $_. DNS1
  $DNS2 = $_. DNS2
  
  Write-host "creation: ' $GName
  Write-host "template name is: ' $TName

  # This takes variables and creates the virtual machine
  Get-OSCustomizationSpec $Spec | Get-OSCustomizationNicMapping | »
  Game-OSCustomizationNicMapping - IpMode UseStaticIP - $ip - $SubnetMask subnet mask - DNS IpAddress $DNS1, $DNS2 - DefaultGateway $Gateway
  New-VM-name $GName - location $Folder - model $TName - host $HName - $Dstore - $Desc Description data store - OSCustomizationSpec $Spec - RunAsync-confirm: $false
  
  #######################################
  #Waiting for cloning process to finish.
  #######################################

  $$$ Under notes show a little history of how I got to this point.

  $$ Note1: the first attempt, I just captured running tasks and their past to the task pending. "Well, since the deploy OVF and ClonVM_Task where it runs would wait up to two when completed by the end."

  $$ Note2: so I added the If Else loop below that failed, because $RTask never equaled only CloneVM_Task, but was a table of two.

  $$ Note3: I tried to us below to separate the two tasks to help

  # $RTask = get-task-status running (who captured the two tasks running)

  # $Array = $Rtask.Split("") (Errored with the method call failed because [System.Object []] contains a method named 'Split'.)
  # So I tried to divide the table like this. ForEach ($Task in $Rtask.Name - Split("")) {Write-Host "my tasks are:" $Task}

  
  Get-task-status Running | Export-CSV "E:\scripts\Current_Tasks.csv".
  $InputFile2 = import-CSV "E:\scripts\mmca\mmca_Current_Tasks.csv".
  $InputFile2 | {ForEach-Object
  $RTask = $_. Name
  Write-Host "current task is: ' $RTask
  IF ($RTask - eq "CloneVM_Task") {}
  Write-Host "current task of Clonning is: ' $RTask
  Write-Host "in the meantime the cloning process finish.
  Waiting-task-task $MyTask
  }
  Else {}
  Write-Host "no cloning process is executed.
  }
  }
  
  # This allows the NIC and set the correct Port Group
  Get-VM-name $GName | Get-NetworkAdapter-name $NIC | Together-NetworkAdapter - NetworkName $NIC_Lable-confirm: $false - StartConnected $true
  
  }

  When I run the present, I get the following:

  # #This shows the task start Clonning #.

  erverId: /[email protected]:443 /
  Status: running
  IsCancelable: true
  PercentComplete: 5
  StartTime: 03/05/2013 00:52:13
  FinishTime:
  ObjectId: VirtualMachine-vm-382
  Result:
  Description: Clone virtual machine
  ExtensionData: VMware.Vim.Task
  ID: Work-task-2070
  Name: CloneVM_Task
  UID: /[email protected]:443 / task = work-work-2070 /

  #########################################################

  # #Runs through the tasks running.

  Current task: deploy the model to the FVO
  No cloning process is executed

  # Ignore deploy it task #.

  # #Matches the If statement and continues to process #.
  Current task is: CloneVM_Task
  Task current Clonning is: CloneVM_Task
  Wait for the cloning process to complete

  # #Error #.

  Waiting-Task: cannot bind parameter 'task '. Impossible to convert the value of 'CloneVM_Task' to type 'System.String' type 'VMware.VimAutomation.Sdk.Types.V1.Task '.
  E:\scripts\Working_Create_Master_Templates.ps1:71 tank: 24
  + Wait-task-task < < < < $RTask
  + CategoryInfo: InvalidArgument: (:)) [waiting-Task], ParameterBindingException)
  + FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomation.ViCore.Cmdlets.Commands.WaitTask

  $$$ Under notes show a little history of how I got to this point.

  Note1: The first attempt, I have just captured tasks currently running and pending their past to the task. "Well, since the deploy OVF and ClonVM_Task where it runs would wait up to two when completed by the end."

  NOTE2: So I added the If Else loop below which failed because $RTask never equaled only CloneVM_Task, but was a picture of two tasks.

  Note3: I tried to use the following to divide the two tasks:

  $RTask = get-task-status running (who captured the two tasks running)

  foreach ($Task in $Rtask - Split(""))
  {
  {Write-Host "my tasks are:" $Task}
  IF ($Task - eq "CloneVM_Task") {}
  Write-Host "current task of Clonning is: ' $Task
  Write-Host "in the meantime the cloning process finish.
  Waiting-task-task $Task
  }
  Else {}
  Write-Host "no cloning process is executed.
  }

  
  }

  # #Output the little script above #.

  Current task: deploy OVF model CloneVM_Task
  My tasks are: deploy
  My tasks are: OVF
  My tasks are: model
  My tasks are: CloneVM_Task
  Task current Clonning is: CloneVM_Task
  Wait for the cloning process to complete
  Waiting-Task: cannot bind parameter 'task '. Impossible to convert the value of 'CloneVM_Task' to type 'System.String' type 'VMware.VimAutomation.Sdk.Types.V1.Task '.
  Online: 11 char: 24
  + Wait-task-task < < < < $Task
  + CategoryInfo: InvalidArgument: (:)) [waiting-Task], ParameterBindingException)
  + FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomation.ViCore.Cmdlets.Commands.WaitTask

  I'm new to Powercli and I've scoured Google for a possible answer. I thought I might have a solution that has been published on the VMware PowerCLI Forum, but I couldn't get this to work. Any help would be greatly appreciated.

  #########################################

  I wasn't worried about how to tasks where splits, unless I was trying to follow the import fo the OVF, so that the script went into the loop If and as one of the names for CloneVM_Task then he Treaty. But I got the same error I did in the last version of the above script. That's why I have the version curent thinking that if I exported and then imported the tasks it might make a difference.

  I'm new to Powercli and would like a little help. I am either very close or by a mile off. :-)

  Thank you

  Mitch

  Why don't you store the the task object that is returned when you use the RunAsync switch?

  You can create a loop around the State and wait until the clone job is done.

  $task = New-VM -Name MyVM ... -RunAsync 
  
  while($task.ExtensionData.Info.State -eq "running"){
    sleep 1  $task.ExtensionData.UpdateViewData('Info.State')
  }
  

  The big difference with the Wait-job cmdlet, it is that this will allow you to perform additional work in the While loop.

  Waiting-task the cmdlet waits just until the task is finisned and you can not do anything else.

• waited for the parent session complete

  Hello
  
  I have a situation, where I have to put scenarios of execution in a package of ODI
  
  Let me explain
  
  
  package1 - scen1-> scen2-> scen3
  
  Package2 - scen4-> scen5-> scen6
  
  Package3 - scen7-> scen8-> scen9
  
  now I have to build a main package, where I call especially packages
  
  as
  
  PACKAGE FOR THE MAIN:
  package1_scen-> package2_scen-> package3_scen
  
  
  now I have to wait for lot 1 and all scenarios within package1 is completed before package2 started and same for package3
  
  
  I tried with odiwaitforchild session and running packag21_scen, package2_scen, package3_scen in synchronous mode
  
  but when I started the main package of all the scenarios running concurrently.
  
  
  can anyone suggest how to achieve this.
  
  Published by: 916710 on March 1, 2012 01:30

  Then exactly what problem faced while executions of pkg, are you generate script for internship (pkg) or not.

  scenario for each package to generate and put all the scenarios in a new package.

  See you soon,.
  Surya.

• "Wait for activity of façade" - Timeout?

  The function to wait for Front Panel activity has no output to tell if it has expired or detected activity of façade. Is there a way to output a Boolean value true if the service expires as opposed to the detection of the activity of the public Service?

  If not, is there another functions I could combine to create a work around?

  James

  Hi James,

  This should work for you.

  Mike

• waiting for a task to complete

  During the planning of a work like this:
  
  () dbms_scheduler.create_job
  job_name = > a_prog_name | "_JOB."
  job_type = > 'executable. "
  job_action = > a_local_dir | '\' || File1 | ' > null',.
  enabled = > true,
  auto_drop = > true
  );
  
  
  Is it possible to wait for the work to be done before treatment can continue?
  
  Thank you
  Thomas

  Hello

  You can do this by leaving enabled-false online during the creation of employment and then by doing a run_job on the job. The run_job (with use_current_session-online true) will execute the task and wait for it to finish. If you do this, you will also need to manually deposit work using drop_job.

  Hope this helps,
  Ravi.

• signed and paid for the 'Quick Again' service not received service not wait for activation, no response, placed on don't hold forever

  I signed up for the program called 'Fast Again'

  and paid for by (internet) credit card.

  When trying to confirm the membership for the service, repeatedly cautioned, could not make contact.

  The only info I can provide that appears on the internet is

  This so-called pastword . Please help or funds to my card account. Thank you!

  Leilea

  See the answer in the following thread

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-performance/is-fastagain-PC-booster-a-product-of/10a95a83-adf6-47E1-A331-9f2360236ef4

• IMessage waiting for activation

  I am from Pakistan.

  My iMessage used to work fine on my local number. Until one day it stopped working.

  Now, it shows an error "an error occurred during activation. Try again"after a message comes that cool sms will be deducted after clicking the activation button.

  I tried almost everything, but nothing works.

  Includes sign out and sign back Apple ID and do the infamous plane trouble too

  Kindly help please

  OK, first you must pass the parameter and choose which messages to send and I touch receiver option symbol delete the id of that disconnect your apple which means ID in the

  same screen upward on the Center,

  and reconnection even apple ID and number

• Photography purchased subscription plan and I'm still waiting for activation 3 days later - is - this normal? I disconnected CC, restarted my machine and reconnected again.

  I disconnected CC, restarted my machine and reconnected again.

  Hi Mark,

  If I see the records, the order already and you can use it.

  Please see the steps mentioned in the links above.

  Hope that will solve your problem.

  Kind regards

  Hervé Khare

• Waiting for a transition to be completed?

  I use Tweener.AddTween () to apply some transitions to my sprites who say quarter of a second. Once the transition is complete, I need to do something else. The problem is the line immediately after the transition is executed immediately (it does not wait for the transition to complete) and all that mess up. Is it possible in a synchronous way expect the transition ends without taking CPU in a loop, etc.?

  Hey p3pp3r,

  There is a setting for the tweener Oregon 'onComplete' call that performs a function is completed. It goes right into the addTween method.

  Here are more details on the onComplete parameter (along with several other more useful):

  http://hosted.Zeh.com.br/Tweener/docs/en-us/parameters/index.html

  example:

  Tweener.addTween(myobj, {x: 45, onComplete: myFunction});
  

  hope that helps. Good luck!

• Wait for the entry?

  Hi all
  
  I need to create a custom entry dialog box and the problem I encountered is that I can't figure out how to make my request to wait for the user to complete the entries in the framework. When you use a JDialog or JOptionPane application will stop running and wait for the dialog box to close. My question is how to do something similar without using a JOptionPane or JDialog. I just can't figure out how to get the same effect by using a JFrame or other component. I know I could just use a JDialog or JOptionPane to get input from the user, but I'm just curious to know how I can stop running and wait for the entry as the JOptionPane allows you to do, but without using a JOptionPane or JDialog.
  
  Thank you for your help :)
  Nathan D.
  
  -----
  : Edit:
  I forgot to mention that the reason main I avoids JDialogs is I need the entry dialog box to be internal not external application I use mode exclusive fullscreen. And a JOptionPane does not allow me to add the other components too it such as JLabels and other GUI. I just need a way to get input from a component or internal window and wait for the entry as a JOptionPane or JDialog.
  -----
  
  A NBS are:
  
  

  import java.awt.event.*;
  import java.awt.*;
  import javax.swing.*;
  
  
  
  public class Main extends JFrame implements ActionListener {
  
      /**
       * @param args the command line arguments
       */
      public static void main(String[] args) {
          new Main();
      }
  
  
      JButton go = new JButton("Show custom input dialog");
  
      public Main() {
          setSize(300,150);
          setLocationRelativeTo(null);
          setLayout(new FlowLayout());
          go.addActionListener(this);
          add(go);
          setVisible(true);
      }
  
      public void actionPerformed(ActionEvent e) {
          InputDialog d = new InputDialog();
  
          /*
           * Here is the problem it is necessary that I create a
           * custom input dialog to allow further modifications however
           * i'm not sure how to wait for the user to enter text and press
           * continue in that input dialog. Unlike JOptionPane the code executes
           * before the user presses continue. My question is how do I wait for the user
           * to press continue in the InputDialog before I call d.getString(); without making the main
           * application unresponsive.
           */
  
          String returnValue = d.getString();
          System.out.println("return value "+returnValue); //will be null or empty because application doesn't wait for input.
      }
  
  
      class InputDialog extends JFrame implements ActionListener {
          JTextField f = new JTextField();
          JButton go = new JButton("Continue");
  
          public InputDialog() {
              setTitle("Custom Input Dialog");
              setSize(300,150);
              setLocationRelativeTo(null);
              setLayout(new FlowLayout());
              f.setPreferredSize(new Dimension(100,25));
              go.addActionListener(this);
              add(f);
              add(go);
              setVisible(true);
          }
  
          public void actionPerformed(ActionEvent e) {
  
          }
  
          public String getString() {
              return f.getText();
          }
      }
  }

  Published by: neptune692 on January 3, 2011 13:25

  neptune692 wrote:
  .. a JOptionPane does not allow me to add the other components too it such as JLabels and other GUI. ..

  Of course, it does!

  import java.awt.event.*;
  import java.awt.*;
  import javax.swing.*;
  
  public class DumbNameMain extends JFrame implements ActionListener {
  
      /**
       * @param args the command line arguments
       */
      public static void main(String[] args) {
          new DumbNameMain();
      }
  
      JButton go = new JButton("Show custom input dialog");
  
      public DumbNameMain() {
          setSize(300,150);
          setLocationRelativeTo(null);
          setLayout(new FlowLayout());
          go.addActionListener(this);
          add(go);
          setVisible(true);
      }
  
      public void actionPerformed(ActionEvent e) {
          JTextField f = new JTextField(10);
          JButton go = new JButton("Continue");
          JPanel p = new JPanel(new FlowLayout());
          p.add(f);
          p.add(go);
          JOptionPane.showMessageDialog( this, p );
  
          String returnValue = f.getText();
          System.out.println("return value "+returnValue);
      }
  }