shutter not woking
I have an old T3 of three years. Great camera. Was without problem. I use it for work. went tgo take pictures today. On usual full auto. accessory Flash on. Camera poweres on. Look through the viewfinder. All the numbers are there. Press shmutter. No sound. LED screen goes black then goes back to see. shutter is not functuoningTries different sd cards. Still no pictures. Any help is greatly appreciated.
That does not sound good. I'll assume that you don't damage the cmera somehow before that?
No, OK, reset the default camera. Make sure you have a known good fully charged battery. A brand new formatted by this camera SD card. And different objectives. Give it a go. You must do the following steps before calling Canon Support for a request for redress.
Tags: Canon Camera
Similar Questions
-
my window cursor is not woking
my window cursor is not woking, I can just see the name of the icon, no icon image, tried to restore but did not work. I can get the software from somewhere.?
Hi AppY_18,
Thanks for posting your question in the Microsoft answers Forum. Follow the steps in this thread to restore your sidebar function.
Let us know if that helps.
-
Mac - latest firefox url bar not woking
Hello
My url bar does not return after typing the address.
The right arrow key does not work.I've disabled all the addon and still the same issue.
Reinstalled (replaced) with a new download.Help would be good as Firefox is the browser I use all the time and have for years
Hello
I deleted the profile and restarted his work.
Sorry, profile deleted as just kept Favorites and passwords registered after exportConcerning
AndrewAdditional comment (~ J99)
If you get the question of the bar address works again, until this bug is fixed, and which could be several months, the solution is to rename places.sqlite as explained in http://kb.mozillazine.org/Locked_or_damaged_places.sqlite#Rebuild_Places_database.More information in my post under here # 750708 answer
With then proceed explained in full in the bar doesn't work do not address of Firefox 39 /questions/1070999 #answer - 750702 accompanied by a note on an advanced mthod, which can restore the database, including history -
PS/2 keyboard not woking on a T61
Greetings,
I ran int a bit wrong with this keyboard from my friends, it's a "Logitech Internet 350 Keyboard" with a PS/2 connector.
The T61 with not a PS/2 port (without a dock) I use a PS/2 to USB converter.
In the case of windows, the keyboard presents itself as an unrecognized device, or if it'll work in the BIOS menu.
I tried updating the BIOS with the latest version via the update flash Thinkpad utility, but still no dice.
I heard that PS/2 is now considered a legacy port and some laptops have an option in the BIOS to enable support for them, but none seems to be present in mine.
In addition, the keyboard itself is in fine working condition and has no functioning disorders when it is connected to a desktop PC with the PS/2 connector USB or PS/2 directly.
Any info on how to address this issue is appreciated. Even if it's to say that I'm doing the impossible
Hello
My understanding is that some of the new keyboards made with PS/2 connectors contain also additional electronics on their map logic, which allows them to detect when a physical PS/2 to USB adapter is plugged and list as a USB HID class device. More old PS/2 keyboard without electronics to intelligently switch between both require an additional electric bridge to convert the signals, which is one of the more expensive cards offer when it is plugged in between the keyboard and the computer.
Kind regards
Aryeh Goretsky
-
Why my wifi is not woking, while my wired connection works well
I used to go very well with my connection wifi up to what a few days back, when I I used the wired and wireless connection, and there is no problem at all. "Recently my connection started defective WiFi giving error'Internet Explorer cannot display this webpage", so wireless mode stopped working.whereas if I connect wired, internet Explorer works fine without any problems. I'm also using a Samsung Tab, in which the same wifi connection works very well (infact I write this question through my tab connected wireless with the same modem). I have Internet Explorer 8 on my computer windows xp professional SP 3 version, 300w2 TDSL ROUTER ADSL2 + CPE/WIRELESS modem laptop usingBSNL. I tried all the solutions support through your forum, but my problem can be solved. Pleas help me... thanks...
When you right-click the wireless adapter icon and select "view available wireless networks.
- Do you see your network?
- If you see your network, is described as 'non-secure' WEP or WPA or WPA2?
- Is your network described as 'connected '?
- What happens when you try to connect to your wireless network?
Follow these steps:
Open the Device Manager (start > run > devmgmt.msc > OK)
Expand the "Network adapters" section by clicking on the + sign to the left
What is the full name of your entered here wireless adapter?
Double-click the adapter and the report
the full text in the box "device status".
the full text in the box 'use of the device.
Open a command prompt window (start > run > cmd > OK)
Type the following in the black command prompt window, and then press ENTER after each line
ipconfig/all > "% userprofile%\Desktop\ipinfo.txt".
Notepad '% userprofile%\Desktop\ipinfo.txt '.
output
In the opened Notepad window, click Edit > select all (or CTRL + A) and click Edit > copy (or CTRL + C)
Right click > paste (or CTRL + V) the data in your response here.
Close the Notepad window and delete the file ipinfo.txt to your desktop
See the section "Configuration WiFi" at this page--> http://netvuze.blogspot.com/2013/04/dsl-broadband-modem-configuration.html
Please provide the following information (don't change any settings, click 'Cancel' to close the page after you've seen it):
- 'Access Point' on or off?
- "Channel" is set to auto?
- What has the value "wireless mode"?
- What's "Broadcast SSID" Yes or no?
- What has the value "authentication type"?
- What has the value "encryption"? DON'T POST NOT YOUR PRE-SHARED KEY HERE
- In the section 'Wireless MAC address filtering', is 'Active' on or off?
-
my cd/dvd driver is not woking, nor can I locate?
can not burn cd or DVD my computer can not find the driver and I have to as you manually open the cd with a needle?
Hello
· Were there any changes made to your computer until the problem occurred?
· You are able to see your DVD in Windows Explorer (my computer) or the Device Manager?
· This error message you get when you try to burn CD/DVD discs?
There could be a hardware problem possible with your CD/DVD drive.
I suggest you to follow a few troubleshooting steps and check if that help in the issue of the attachment on your computer.
Method 1:
Check if your CD/DVD drive is detected in Device Manager.
Click on start - Control Panel of configuration-Device Manager - CD/DVD
Method 2:
See the following Microsoft article that has solutions to some common problems with CD/DVD drive:
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a FixitWhen you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsProvide us additional information. So that we can help solve you the problem on your computer.
Hope this information helps you.
-
I have my HP w2338h monitor hooked up to my HP Pavilion Elite desktop computer. I also hung on my x - box via HDMI. I would use the buttons before switching between sources without turning off one just for the monitor switch. None of the buttons before you do anything. The volume, menu, select, Source, NOTHING. I tried to download the drivers who seemed installed properly, but nothing has changed. It has always been like that, but I'm just now trying to figure out why they do not work.
Thank you!
Geovaa,
Hold the power button while the monitor is unplugged drains the energy stored in the monitor.
Looks like a loser for the buttons connection.
Let me know if you have any questions.
-
I have set up family safety on windows 7 as administrator on two standard users, but the curfew settings do not work?
Hello
Let us try to remove parental control for Windows 7 and then reconfigure it to check the issue.
To uninstall the parental control of PC running Windows 7
http://Windows.Microsoft.com/en-us/Windows-Live/Family-Safety-remove-uninstall-FAQTo set the new parental controls, refer to the section "how to set up parental controls on Windows 7 or an earlier version?
-
Signature tool is not woking and he hangs everything by signing
Hello
Get the BlackBerry signing keys (.) File CSI) supports the development of BlackBerry applications. When I try to install those signature keys (RRB, RRT, CPR) in my eclipse these keys have been successfully registered. But when I sign. COD file with the signing tool signature tool is not that answer/hanging...
Can someone suggest me please on this issue...
This should fix it for you.
SignatureTool stops responding during signature
If you're still having problems after following these steps made me know.
-
on app not woking on blackberry vadaphone services
Hello
I have devloped a request
application running on a WiFi connection and the beautiful normal work of the network
But if I activate a blackberry blackberry plane and after that I have run application does not
so, after start the blackberry services on which my application run connection? (as Encore, direct TCP)
and also I have the video network connection and it says if you want to use BIS to Member of the Alliance (also for pay additional coast for membership) blackberry is normal?
Thanks in advance...
I recommend that you check out the videos of networking you'll find if you put the network in the area of research to understand the various methods of possible connections.
Then you really have the choice
(a) use OS 5.0 ConnectionFactory
(b) create your own code to determine what connection string to add to your URL for the connection.
I recommend that you stick with OS 5.0 and use ConnectionFactory. Then, you can simply set that you want to use connection options and will choose it for you.
However, it will work not with BIS-B. If you want to use BIS - B, then you must ask the RIM if you can. It's easier if you are a member of the alliance. You can also get by devious means:
-
In my computer, installed the audio driver is driver realtek HD audio. When I plug mic mic before it don't not hear my vocals , but in the recording devices, he shows plugged and ' loan'.»» (Perhaps, I feel there is there a hardware problem)
OK, when I plug it to the rear microphone port, it also does not check / hears my voice + in recoding devices it shows "Not Plugged In"..
Is there any Solution to this?
My setup is- Chipset INTEL945G
- Realtek ALC662 Audio codec
- OS: Windows 7
Hi Cbx_ibson_junior,
What is the number and the model of the computer?
This problem may occur because of driver problem or due to incorrect settings.
Method 1:
I suggest you install the latest audio driver on the manufacturer's Web site and check if it helps.Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyMethod 2:
If the problem persists, I suggest you Microphone as default device and check if it helps.a. go to Start and click on Control Panel.
b. click on her, then a new window will open.
(c) in the new window click on the tab "recording" and right click in the window and click Show disabled devices.
d. now check if the Microphone is listed here and right click above and choose Activate.
e. highlight this Microphone and click "set as default".Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.
-
no_parallel Council is not woking.
Hi all
DB Vesrion - 10.2.0.3.
One thing is just me confusing here is, even when the suspicion of no_parallel is given, the optimizer always helps the parallelism. Also, I tried to put all the paintings, which implies in this query the value no parallel.even then, optimizer still use parallelism. Here, I want to just disable parallelism for this query. In addition, parallel_automatic_tuning is also set to false.
ConcerningSQL> explain plan for 2 SELECT /*+ no_parallel(IMC,frm,cmr,rap) */ (SUM(IMC.TYPICAL_PERCENT)) TYPICAL_PERCENT FROM rds.ITEM_MASTER_COMPONENT IMC, 3 4 rds.master_formula frm 5 WHERE FRM.FRM_ID = 2060055 AND 6 IMC.IML_ID = FRM.IML_ID AND 7 EXISTS (SELECT 'X' FROM DUAL WHERE 8 IMC.CMP_ID in (select cmp_id 9 from rds.component_regulation cmr, rds.regulatory_application rap 10 where cmr.rap_id = rap.rap_id 11 and rap.procedure_name = 'CHALLENGE_USA_HYDROCARBON')) AND 12 frm.iml_id IS NOT NULL; Explained. SQL> select * from table (dbms_xplan.display) ; PLAN_TABLE_OUTPUT ------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------- Plan hash value: 1894673998 --------------------------------------------------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | TQ |IN-OUT| PQ Distrib | --------------------------------------------------------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | 37 | 17 (18)| 00:00:01 | | | | | 1 | SORT AGGREGATE | | 1 | 37 | | | | | | | 2 | PX COORDINATOR | | | | | | | | | | 3 | PX SEND QC (RANDOM) | :TQ10004 | 1 | 37 | | | Q1,04 | P->S | QC (RAND) | | 4 | SORT AGGREGATE | | 1 | 37 | | | Q1,04 | PCWP | | |* 5 | HASH JOIN SEMI | | 1 | 37 | 17 (18)| 00:00:01 | Q1,04 | PCWP | | | 6 | BUFFER SORT | | | | | | Q1,04 | PCWC | | | 7 | PX RECEIVE | | 25 | 600 | 8 (0)| 00:00:01 | Q1,04 | PCWP | | | 8 | PX SEND HASH | :TQ10002 | 25 | 600 | 8 (0)| 00:00:01 | | S->P | HASH | | 9 | NESTED LOOPS | | 25 | 600 | 8 (0)| 00:00:01 | | | | |* 10 | TABLE ACCESS BY INDEX ROWID| MASTER_FORMULA | 1 | 8 | 3 (0)| 00:00:01 | | | | |* 11 | INDEX UNIQUE SCAN | FRM_PK00 | 1 | | 2 (0)| 00:00:01 | | | | | 12 | TABLE ACCESS BY INDEX ROWID| ITEM_MASTER_COMPONENT | 25 | 400 | 5 (0)| 00:00:01 | | | | |* 13 | INDEX RANGE SCAN | ITEM_MASTER_COMPONENT_NDX_N01 | 25 | | 2 (0)| 00:00:01 | | | | | 14 | PX RECEIVE | | 151 | 1963 | 22 (73)| 00:00:01 | Q1,04 | PCWP | | | 15 | PX SEND HASH | :TQ10003 | 151 | 1963 | 22 (73)| 00:00:01 | Q1,03 | P->P | HASH | | 16 | VIEW | VW_SQ_1 | 151 | 1963 | 22 (73)| 00:00:01 | Q1,03 | PCWP | | | 17 | MERGE JOIN | | 151 | 3473 | 22 (14)| 00:00:01 | Q1,03 | PCWP | | | 18 | SORT JOIN | | 30260 | 354K| 19 (11)| 00:00:01 | Q1,03 | PCWP | | | 19 | NESTED LOOPS | | 30260 | 354K| 17 (0)| 00:00:01 | Q1,03 | PCWP | | | 20 | BUFFER SORT | | | | | | Q1,03 | PCWC | | | 21 | PX RECEIVE | | | | | | Q1,03 | PCWP | | | 22 | PX SEND BROADCAST | :TQ10000 | | | | | | S->P | BROADCAST | | 23 | FAST DUAL | | 1 | | 2 (0)| 00:00:01 | | | | | 24 | PX BLOCK ITERATOR | | 30260 | 354K| 15 (0)| 00:00:01 | Q1,03 | PCWC | | | 25 | INDEX FAST FULL SCAN | CMR_UN01 | 30260 | 354K| 15 (0)| 00:00:01 | Q1,03 | PCWP | | |* 26 | SORT JOIN | | 1 | 11 | 3 (34)| 00:00:01 | Q1,03 | PCWP | | | 27 | BUFFER SORT | | | | | | Q1,03 | PCWC | | | 28 | PX RECEIVE | | 1 | 11 | 2 (0)| 00:00:01 | Q1,03 | PCWP | | | 29 | PX SEND BROADCAST | :TQ10001 | 1 | 11 | 2 (0)| 00:00:01 | | S->P | BROADCAST | |* 30 | TABLE ACCESS FULL | REGULATORY_APPLICATION | 1 | 11 | 2 (0)| 00:00:01 | | | | --------------------------------------------------------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 5 - access("IMC"."CMP_ID"="ITEM_1") 10 - filter("FRM"."IML_ID" IS NOT NULL) 11 - access("FRM"."FRM_ID"=2060055) 13 - access("IMC"."IML_ID"="FRM"."IML_ID") 26 - access("CMR"."RAP_ID"="RAP"."RAP_ID") filter("CMR"."RAP_ID"="RAP"."RAP_ID") 30 - filter("RAP"."PROCEDURE_NAME"='CHALLENGE_USA_HYDROCARBON') NAME TYPE VALUE ------------------------------------ --------------------------------- ----------- fast_start_parallel_rollback string LOW parallel_adaptive_multi_user boolean TRUE parallel_automatic_tuning boolean FALSE parallel_degree_limit string CPU parallel_degree_policy string MANUAL parallel_execution_message_size integer 16384 parallel_force_local boolean FALSE parallel_instance_group string parallel_io_cap_enabled boolean FALSE parallel_max_servers integer 240 parallel_min_percent integer 0 parallel_min_servers integer 0 parallel_min_time_threshold string AUTO parallel_server boolean FALSE parallel_server_instances integer 1 parallel_servers_target integer 96 parallel_threads_per_cpu integer 2 recovery_parallelism integer 0
You say you use 10.2.0.3, but your settings are 11.2. Are you sure that you are always connected to the same database?
But apart from that, 11.2, you can disable parallelism for a query with a mere suspicion.
SELECT / * + no_parallel * /.
-
JavaScript not woking in IE and Chrome
Hi all
I have the simple javascript function in my application that set the focus to the button. The code is below:
< script type = "text/javascript" >
function setfocs()
{
$('#add_row_id').focus ();
}
< /script >
This feature is only not working in Firefox, but does not not in Chrome and IE. Please tell me how to solve this problem?
Thank youHello
I have the simple javascript function in my application that set the focus to the button. The code is below:
This feature is only not working in Firefox, but does not not in Chrome and IE. Please tell me how to solve this problem?
>Please use the {code} tags when posting code.
See http://www.mkyong.com/javascript/focus-is-not-working-in-ie-solution/
See you soon,.
-
Animation of edge not woking on remote server?
Hi I'm new on board and experiencing problems get my file animated works on a remote server, it's a simle animation (moving background image).
It works fine on my local computer in Dreamweaver and preview in the browser (s) ok? I thought it may be something to do with the .js files that links from the html file? but not smart enough to work on ime?Any help / pointers would be much appreciated...
Lee.
This is where the files are located...
http://bondagetips.co.UK/stew/
You do not have download the sub folders.
There should be a required subfolder called /edge_includes with a few files it contains.
If your project uses images, then it should also be an another subfolder called/images.
In its current form, it loos you have copied images and edge.1.5.0.min.js out of their respective folders files and placed them in the root.
Darrell
-
The windows button 8 at the bottom of the screen stopped responding, well it gives a little vibration when nothing touched past while he used to get to the metro home screen whenever he was touched. I guess that the button works because it gives a little buzz so Im guessing that somewhere in the OS function button has been disabled. Where should I start looking for so that I can re - activate?
I followed the first link, but the solution only works for windows 8. In the upgrade to 8.1 windows, the registry key that controls the button has been removed apparently. Ultimately I went back to an old version of restore point before the installation of MS visual studio that restores the function, like I wanted.
Maybe you are looking for
-
How can I transfer files photo on a CD for my iPad. IS it easy
-
Passage of an object by a shared variable
Hi all I don't know if the title is entirely appropriate, but it describes exactly what I'm trying to do. I have an application that runs on a machine RT which I'm trying to pass an object of the application on the machine of the RT to a host. The
-
[Error number: 0x8024400A] update of Windows
Just got this computer yesterday and is supposed to have a new installation of windows xp media center edition. Ive tried to update to SP3. Im stuck and don't know what to do so that any help out there?
-
Just at the moment where I try to open windows Photo Gallery, he said Photobase dll. not been found. Now, what
-
HP Photosmart B110 while a printer - this isn't printing!
I have a HP laptop and an HP printer B110 all in one. I used the printer a week or if there are printing from my iPad I did through Air Wireless print and it was very good. I use my laptop now and try to print; I get no error message on the computer