Signature update by group MC IDS?

Similar Questions

• Cisco IDS 4215 signatures update

  Hello people,
  We have a few Cisco IDS 4215 and would like to know if the upgrade of signatures, we can remove those released previously or whether precedents should not be eliminated.

  Information system of these devices.

  ***

  TAC-contact information
  URL: http://www.cisco.com/public/support/tac/home.shtml/
  Phone: 1 (800) 553-2447

  Sensor time is 110 days.
  Platform: IDS-4215-4FE-K9
  Boot partition: application

  Partition: application
  Build version: 6.0 (6) E3
  Host:
  Domain keys key1.0
  Definition of signature:
  Update of the signature S439.0 2009-09-30
  Virus update V1.4 2007-03-02
  OS version: 2.4.30 - IDS-smp-bigphys
  Applications
  MainApp
  N NUBRA_2009_JUL_15_01_10_6_0_5_57 2009-07-15 T 01: 15:08 - 0500 ipsbuild
  The executing State: running
  AnalysisEngine
  N NUBRA_2009_JUL_15_01_10_6_0_5_57 2009-07-15 T 01: 15:08 - 0500 ipsbuild
  The executing State: running
  Updates installed
  Update name: IPS - K9 - 6.0 - 6 - E3
  Once installed: July 15, 2009 18.48.06
  Update name: IPS-GIS-S439-req - E3.pkg
  Installed time: 6 October 2009 13.07.55
  Next lower upgrade:
  Partition: recovery
  Build version: 1.1 - 6, 0000 E3

  PEP Udi chassis
  Description sensor unit IPS 4215
  PID ID-4215-4FE-K9
  vid V01
  SN 88808513168

  Memory usage
  usedBytes = 377655296
  freeBytes = 132685824
  totalBytes = 510341120

  Use of the disk
  the application data uses 33.2 M off 166,8 M bytes of disk space available (21% of use)
  start using 37.6 M off 68.6 M bytes of disk space available (58% of use)
  Application log using 529,5 M off bytes of 2.8 G of disk space available (20% of use)

  ***

  Many thanks in advance,

  Luca

  Luca;

  Signature updates are cumulative, so you can simply ask the S493 update.  A caveat, however, if you need to make a big move in the signature release (say S470 to S493) it is usually more effective to make small updates (especially on a platform of low memory as the IDS-4215).

  Scott

• Resource needs memory IDS 4210 CODES signature updates

  I have ID 4210, see the version is displayed as follows:

  ID # sh ver

  Application partition:

  The Cisco Systems Version 1.0000 S37 Intrusion detection sensor

  2.4.18 OS version - 5smpbigphys

  Platform: IDS-4210

  With the help of 257458176 of 261312512 memory available bytes (98% of use)

  With the help of 1.1 G off bytes 17 G of disk space available (7% of use)

  I want to pass that ID to IDS - GIS - 4.1 - 4 - S100.rpm.pkg, but readme indicates firstly that I have to upgrade to Version 4.1 (1) S47 of 3,0000 S61 sensors must be updated with the 4.1 (4) S91 Service Pack before you apply the 4,0000 S100 Signature Update.

  Review of information, in order to upgrade to version 4.1 (1) S47, documentation also says IDS-4210 and IDS-4220 sensors of the series should be upgraded to 512 MB of RAM using a Cisco upgrade kit (part # ID - 4210 - MEM - U or ID-4220-MEM-U) until they can be upgraded with IDS software version 4.1 or later. This update is free for visitors with SMARTnet.

  Please let me know if, depending on the version of my show, I already have the memory requirements.

  Thanks for any help,

  To upgrade 4 - 4.1 - S100 just to first upgrade to version minor update 1.0000 1.0000 S37, followed by service pack 4,0000 S91 S47. Do not apply 4.1 (2) and 4.1 (3) before applying the 4.1 (4), 4.1 (4) is a service pack is cumulative.

  Your show version, looks like you have not upgraded to to the 512 MB of ram required. Once that you upgrade to the 512 MB version show should show something like

  With the help of 452706304 of 509276160 memory available bytes (88% of use)

  Hope this helps

• Signature - updated antivirus definition

  All,

  I worry a bit with the version of update of virus that I see when I run a 'see the version' on our IPS (AIP-SSM-10)

  I get the following output...

  Definition of signature:

  Update of the signature S369.0 2008-12-06

  Virus update V1.4 2007-03-02

  I thought the update of virus was included in the definitions of signature, and as a result, I would have expected the date should be the same on both (i.e. 2008-12-06).

  Can someone explain if that's OK? where I can get the latest virus update...

  Thanks in advance for your help

  Steve

  Steve-

  This isn't something you have to worry. This surfaces topic on a regular basis, so I'll quote two of the best answers of marcabal and mhellman.

  Posted by: marcabal - October 18, 2007, 11:30 am PST

  This is the latest version.

  V signatures are created by Trend Micro Systems when a major virus/worm outbreak occurs and an update of emergency is necessary.

  The V update can then be deployed via a Cisco ICS Management Server.

  But it was not a great emergnecy epidemic in the last 2 years that required a special signature update V.

  Instead the signatures of viruses/worms the last two years have come to be included in the procedure of updating signature standard and figuratively in our standard S signature levels without the need of special emergency updates.

  Often the vulnerability was already detected by an update of standard signature S before the virus/worm started to spread.

  Posted by: mhellman - January 31, 2008, 12:44 pm PST

  See:

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=security&topic=intrusion%20Prevention%20Systems/IDs&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cbeb4ff

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=security&topic=intrusion%20Prevention%20Systems/IDs&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cbe28c5

  http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Security&topic=Intrusion%20Prevention%20Systems/IDS&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dde1bcf/0#selected_message

• 2651XM IPS Signature Update?

  Hello

  I have a 12.4 (25) running to 2651XM 256 MB / 32 MB and I want to update the IPS signature file.  I see that the last update for 256MB.sdf made since August 2008.  The recent IPS that I found is IPS-GIS-S518-req - E4.pkg of

  http://tools.cisco.com/support/downloads/go/PlatformList.x?sftType=Intrusion+Prevention+System+%28IPS%29+Signature+Updates&mdfid=277801011&treeName=Security&mdfLevel=Model&url=null&modelName=Cisco+2651XM+Multiservice+Router&isPlatform=N&treeMdfId=268438162&modifmdfid=278279418&imname=Cisco+IDS+Access+Router+Network+Module&hybrid=Y&imst=Y

  I tried the command

  property intellectual ips homeless location flash:\\IPS-sig-S518-req-E4.pkg

  &

  property intellectual ips homeless flash location: IPS-GIS-S518-req - E4.pkg

  but when I apply an IPS for an interface and execution "show ip IP addresses of all the ' no signature doesn't load and I get the message"invalid token ".

  I tried to see if the latest SDM will help too but nothing.

  My question is, what am I doing wrong or missing?  My router is too old to be able to get the latest signature files?

  Advice or tips to the right direction is appreciated.

  Thank you

  You have a version of IOS, which includes the old version of the IOS IPS feature (known as v4).  This version only supports signature updates using the SDF formatted files.  These files are is more updated.

  The updated signature file you found (ending in .pkg) is accompanied by appliances Cisco IPS signature update package and is not compatible with the IOS IPS feature set.

  The current IOS IPS feature (called v5) also uses the .pkg files.  You have to pass your 2651 IOS to a version of the T train such as version 12.4 (24) T2 for the newest IOS IPS.

  You can find more information about the features of IOS IPS here:

  http://www.Cisco.com/go/iosips

  To get started with IOS IPS v5:

  http://www.Cisco.com/en/us/products/ps6634/products_tech_note09186a008097db66.shtml

  Scott

• Cisco IPS 4200 Signature Update

  We are currently under evaluation and implementation of the Cisco IPS solution to our security needs.

  Our supplier has said that the signature 'online' updates to Cisco IPS is not possible - this is a manual process and we need to charge the device if you want to update the files.

  Somehow, it defies logic. Surely, I think, that any IP address should have the possibility of obtaining signatures updated "online".

  I apologize, because that question is too basic in nature. But could someone shed more light on this?

  Thank you.

  You have auto update functionality of Cisco IPS version 6.0, take a look at the attached picture.

  Update of signatures is * recommended * that you reload the signatures (restart the sensor), although this is not mandatory.

  Our IPS has not been restarted for over two months now and everything is working ok.

  Automatic update

  Automatic update

  Automatic update

• S371 signature Update error code

  I am trying to update my sensor to S371 and receive the following errors. I upgrade to a Director of virtual machines on a unit 4240. I was able to update S370 successfully. Any help is appreciated.

  I enclose the test in a file in the case of word wrap calendering.

  ERROR MESSAGE FROM THE DIRECTOR OF VIRTUAL MACHINES:

  My-sensor: Signature Update process

  Exception in the place of the sensor: the sensor is rebooted with 8,0000 E3S370 version

  instead of the version expected 5.1 (8) E3S371, but no errors were reported during the

  Update.

  Errors encountered during the update of sensor, this sensor update are abandoned.

  Errors encountered during the update of sensor, this sensor update are abandoned.

  ===================================================================================

  THE SENSOR ERROR MESSAGE CONSOLE:

  The message of [email protected] / * /-sensor

  (somewhere) at 18:26.

  Update IPS-GIS-S371-req-E3

  The message of [email protected] / * /-sensor

  (somewhere) at 18:26.

  Error when sending the sensorApp control operation. The restoration of old signatures.

  The message of [email protected] / * /-sensor

  (somewhere) at 18:26.

  Full update

  The message of [email protected] / * /-sensor

  (somewhere) at 18:26.

  UN-installing IPS-GIS-S371-req-E3.

  The message of [email protected] / * /-sensor

  (somewhere) at 18:27.

  Uninstall complete.

  Yes, it's a bad package, not just a problem on your side.

  Withdrawing now.

  I am unsure of your Setup, but the package of sensor s371 from here:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ips6-sigup

  can be used to update your sensor (s). This however leaves you with a version of the sensor out of sync to the version number for the CSM sensor.

• Signature updates

  Hello

  I very much back to IPS I want to update my AIP - SSM 10 Mr. signatures as if now on cisco site there are updates the signature file, the most recent is S495, I m in my EPI S300, which is so is to update all small parcel until S495 signature that I have to download maually 1 by 1 or any link to download bulk signing up the last while.

  Thank you

  Haya;

  You should make sure you are running a version of IPS software that contains the E4 analytical engine (6.0 (6) E4 E4 6.2 (2) or 7.0 (2) E4).  You can then download the latest signature update package (S491) and apply this update.  You don't need to apply each update of signature package.

  Scott

• signature update error

  Hello

  My client got an error when installing new IPS signature:

  Cannot upgrade the software on the sensor.
  Date of license of the target system is too old to treat the config with the version S561.0
  I assume that the license key has expired and not installed new license key at IPS. Is this right?
  Best regards
  Jackson

  Yes, you are right. You need a valid license in order to apply the updates to the signature.

  You can get a license of TIME trail ONLY 60 days for each sensor you own (licenses are specific sensor so may not be transferred between the sensors)

  Software updates can always be applied to the sensor, even with an expired license. Each software update also includes the current signature pack from the release date of the software update. Frequent software updates include the new new engines of signature and signatures with these engines. The first version of these new signatures are "far from perfect" and sometimes noisy, look a little more work than your standard signature update required.

  -Bob

• IPS Signature updates

  My client has not installed updates signature in 2011. It is now ready to begin a planned update procedure. My question is: are the cumulative updates, i.e., by upgrading today, am I get all the latest signatures by the most recent (s615 today).

  Yes the signature updates are cumulative, but they do not depend on a minimal version of the software. If you are already running any release of E4, you can access the end of the signature update and install S615.

  -Bob

• Where should I add the policy to ban the non-administrateurs to apply the signature update seller?

  Original title: prohibit the non-administrateurs to apply the signature update vendor

  Where should add this policy? Should it be added to the default domain policy? Please notify

  Thank you

  Hello

  The question you have posted is better suited for the TechNet forums.

  Please ask your question in the following link for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  It will be useful.

• Download patches selected with the Signature Update task

  Is - it there anyway I can download patches selected in vmware update manager repository? I use just the ESX 3.5 hosts in my environment, and most of them are already patched some level so now I just only the required patches to download. I recently installed the Update Manager and noticed that the signature update task is 50% for last many hours and download all patches including associated hosts ESX 3.0.x... Please help.

  Try

  vmware-umds -E --dest -s -e

  Thank you

  Jitendra

  VCP, MCSE 2003, MCITP Enterprise Admin, CCNA, ITIL Foundation, Netapp NS0-153 (storage area network)

  Personal website - http://www.virtualizationtrainings.com, http://www.hillsindia.com

• Updating the group information in the OID

  Hello
  I want to update the group information in the OID. There are tasks on behalf of dn and group of the container to date i.e. ContainerDN updated to put day and GroupName.
  What should I do to update my other attributes.
  
  Thank you

  There is an existing adapter to update the attributes of OID group.
  You can reach "OID change group, or role ' with your task of process and your task will be made.

  Hope this helps,
  Sagar

• S49 signature update for 4.01 S37 IDS

  We ID 4210 and version 4.01 S37 and IDS - GIS - 4.0 - 2 - S46 updates, IDS - GIS - 4.0 - 2 - S47 are installed. Can I install S49 update to my ID?

  S49 cannot be applied to sensors 4.1 (1) you must first switch to 4.1 (1) with the following package:

  IDs-K9-min-4.1-1-S47.rpm.pkg

  Then, you can install the update of the Signature S49:

  ID - sig - 4.1 - 1 - S49.rpm.pkg

  Both are available at:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ids4

  The problem you're going to have, is that the 4.1 update package (1) requires that the memmory your ID-4210 is increased.

  If you SmartNET contract on your ID-4210 while you can use Cisco product upgrade tool to order the upgrade of memmory without extra charge.

  The 4.1 update (1) cannot be loaded on a 4210 IDS without the upgrade of memmory. If you cannot load S49 without upgrading memmory.

• Question about IPS signature updates.

  I installed ASA5510 (with AIP10) on our customer site. But I can't find out how to upgrade the IPS signature. Automatic update is possible? i.e. through CCE id.

  Our client is not MC IDS. What should we do? Let me know, please.

  Without MC there are no automatic updates directly from CEC. However, you can configure a local server (SSH or FTP) and copy packages to update signature for this EAC server. Then, you can run a manual upgrade of IDM (https://1.2.3.4) or the CLI (session in the ASA SSM card) or set up a schedule of automatic upgrade that will modernize the sensor on the local server periodically. To configure the auto updates, IDM would be the easiest to use. If you want to do a manual upgrade here is an example for the CLI:

  session # 1

  # conf t

  # ssh host 1.2.3.4

  # upgrade scp:[email protected]/ * ///home/user/upgrades/ IPS-sig-S192-minreq-5.0-1.pkg